Create Inspection lot at 'Network - Activity' level
hi all,
We are having a requirement to see if there's a possibility to Create inspection lot at 'Network - Activity' level for activities that are "In-house" processing. So that the user can record the Inspection information against a Network - Activity.
Ex - Network Activity:
1)Plate cuttingu2014 Inspect cut edges
2)Welding - Inspect Weld joint
3)Rolled tube - Check Inner diameter
Any suggestions plz!!.
Similar Messages
-
Problem to creating Inspection Lot
Hi,
I am creating inspection lot using fm as mention below, with inspection type '89'.
call function 'QPL1_INSPECTION_LOT_CREATE'
exporting
qals_imp = l_qals
rmqed_imp = l_rmqed
importing
e_prueflos = l_prueflos
e_qals = l_qals
subrc = l_subrc.
if sy-subrc = 0.
Update memory stack for actual posting...
call function 'QPL1_UPDATE_MEMORY'
exporting
i_qals = l_qals
i_updkz = 'I'.
Post lot to DataBase...
call function 'QPL1_INSPECTION_LOTS_POSTING'.
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'
IMPORTING
RETURN =
I am getting message, Inspection lot created successfully. But unable to view the Inspectionlot in QALS table. or Is there is any other process to create Inspection lot.
Will you help to solve this problem.
Thanks & Regards,
SriniHi,
Check this .
wa_rmqed-dbs_flag = 'X'.
wa_rmqed-dbs_edunk = 'X'.
wa_rmqed-dbs_fdunk = 'X'.
wa_rmqed-dbs_noerr = 'X'.
wa_rmqed-dbs_nowrn = 'X'.
wa_rmqed-dbs_nochg = 'X'.
wa_rmqed-dbs_steuer = '01'.
WA_QALS-MANDANT = SY-MANDT.
wa_qals-WERK = 'XXXX'.
WA_QALS-HERKUNFT = '89'.
WA_QALS-MATNR = '000000000000111111'.
WA_QALS-LOSMENGE = '1'.
WA_QALS-PASTRTERM = SY-DATUM.
WA_QALS-CHARG = 'Test123456'.
WA_QALS-PLNNR = 'FORMULA1'.
WA_QALS-PLNAL = '1'.
WA_QALS-PPLVERW = '3'.
WA_QALS-STAT01 = 'X'.
WA_QALS-STAT20 = 'X'.
WA_QALS-PLNTY = 'Q'.
WA_QALS-PLNNR = 'FORMULA1'.
WA_QALS-PLNAL = '1'.
WA_QALS-CHARG = 'AB78654'.
CALL FUNCTION 'QPL1_INSPECTION_LOT_CREATE'
EXPORTING
qals_imp = wa_qals
rmqed_imp = wa_rmqed
IMPORTING
E_KZSKIPLOT =
e_prueflos = gv_prueflos
E_QALS =
subrc = gv_subrc.
E_SKIP_TO_STOCK =
IF gv_subrc = 0.
COMMIT WORK.
ENDIF.
WRITE 'ABCD'.
Ashutosh -
How to check plan line items for plan cost at network activity level?
Dear all,
How to check plan line items for plan cost at network activity level? The plan cost is done in network activity in CJ20N.
I am not able to check using CJI4 or CJI9 report.
Kindly advise.
Thanks and regards,
JessieHi Jess,
Have you checked the navigation part which is being displayed on left hand side of report S_ALR_87013565 and S_ALR_87013533.? There you have option to check transaction currency and object currency when you double click on it.
In case if it is not being displayed under navigation. Then you can bring them on from transaction code CJE2. For eg: Report group for S_ALR_87013533 is 12KST1C. Double click on it and it will open up to do changes in report layout and many more. There you also have options to bring on transaction currency too. Similarly, you can check for other report groups as well just by checking the report description.
But I am not sure if suits your requirements. Wait for other experts to comment on this.
Regards,
Amit -
FM to create inspection lot same as in QA01
Hi Experts,
I need a function module to create inspection lot as in QA01. Can you please help?
Thanks,
VitzHi vitish I will refer you to this wiki .. created by Arpit shah
http://wiki.sdn.sap.com/wiki/display/Snippets/FMforAutomaticInspectionLot+Creation
According to the wiki
the FM you are looking for is
QPL1_INSPECTION_LOT_CREATE
Also a BAPI for the same
CO_QM_INSPECTION_LOT_CREATE.
Also a forum entry for the same
Inspection Lot creation Problem using FM QPL1_INSPECTION_LOT_CREATE
Br
Manthan. -
How to create inspection lot manually without using QA01 Transaction code?
Hi,
Please anybody give procedure for creating Inspection Lot Manually without using Transaction Code QA01Hello, Srinivas,
If you want another T code only then you can try QA01A.
or you can create a Physical Sample with QPR1 and then click on the button there to create inspection lot. To create inspection lot for that Physical sample (you will able to see that button only after releasing the sample) Or you can use QPR5.
But let me know the reason why you want T code other than QA01.
Regards,
Shyamal -
Hi,
Someone know if exists an standar BAPI or function to create an inspection lot?
Many thanks!!Hi,
try these....
Function group Function group short text
Function Module Name Short text for function module
COQM Create inspection lot from order
CO_QM_INSPECTION_LOT_CREATE Create inspection lot from order
CPCC_BUS1191 BAPIs for Inspection Plan
ALE_INSPECTIONPLAN_CREATE
BAPI_INSPECTIONPLAN_CREATE Create Inspection Plan
CPDMDATACOLLECTOR2
C_PDM_INSPECTIONPLAN_CREATE
QMHU
QMHU_INSPECTION_LOT_CREATE
QPL1
QPL1_INSPECTION_LOT_CREATE
QPLEXT
QPLEXT_INSPECTION_LOT_CREATE
Arunima -
Creating inspection lot in REM
Hi
In REM(Repetitive Manufactruing) Scenario:
Is their any possibility to create an inspection lot.
1) At the first GR and no more at subsequent GR or;
2) at each GR?
Thanks in advance
SaravanaHi kumar
if you want to create inspection lot for REM then following are the settings
1. inspection type 13 for inprocess check for repetative with task list selection
2. maintained inspection characteristics in rate routing for which you want to maintained inspection.like inspection point
3. Inspection creation by tcode MFPR which creates inpsction lot for your production version. manually,
Regards
Pravin -
I need to create inspection lots using FM. I have the matnr and charg available. How to use this FM to create inspection lots?
CALL FUNCTION 'QPL1_INSPECTION_LOT_CREATE'
EXPORTING
qals_imp =
rmqed_imp =
* IMPORTING
* E_KZSKIPLOT =
* E_PRUEFLOS =
* E_QALS =
* SUBRC =
* E_SKIP_TO_STOCK =We have created a function which creates inspection lots based on some Z-tables we have. The FM you mention creates the inspection lot but just stores it in memory. It is necessary to update table QALS. Here's the interesting part of the code we're using:
LIKP data:
MOVE ztaf07-proveedor TO l_likp-lifnr.
MOVE ztaf07-cliente TO l_likp-kunnr.
MOVE ztaf07-cliente TO l_likp-kunag.
SELECT SINGLE vkorg FROM vbak
INTO l_likp-vkorg
WHERE vbeln = ztaf07-vbeln.
IF sy-subrc <> 0.
MOVE sy-subrc TO l_subrc.
EXIT.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LIPS data:
MOVE ztaf08-matnr TO l_lips-matnr.
MOVE ztaf08-werks TO l_lips-werks.
MOVE ztaf08-c_fact TO l_lips-lgmng.
MOVE ztaf08-vrkme TO l_lips-meins.
MOVE ztaf08-charg TO l_lips-charg.
MOVE ztaf07-fecha TO l_lips-mbdat.
TVLK data:
MOVE '89' TO l_tvlk-qherk. "Lot creation without reference
CALL FUNCTION 'QAAT_SD_LOT_CREATION'
EXPORTING
i_kuwev = l_kuwev
i_likp = l_likp
i_lips = l_lips
i_tvlk = l_tvlk
IMPORTING
e_prueflos = l_prueflos
E_TEILLOS =
EXCEPTIONS
x_no_origin = 1
OTHERS = 2.
IF sy-subrc <> 0.
MOVE sy-subrc TO l_subrc.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
MOVE l_prueflos TO l_lipsvb-qplos.
MOVE 0 TO l_lipsvb-qtlos.
MOVE 1 TO l_lipsvb-updkz.
APPEND l_lipsvb.
CALL FUNCTION 'QAAT_SD_LOT_POSTING'
TABLES
t_lips_tab = l_lipsvb.
IF sy-subrc <> 0.
MOVE sy-subrc TO l_subrc.
ENDIF.
COMMIT WORK.
ENDIF. -
Create Inspection Lot for Serial Number
Hello,
Is it possible to create an Inspection Lot and associate it to a Serial Number right away.
I've done a process were I've change the Material and Serial Number of my equipment, so now the old inspection lot is not usefull no more and I would need to have a new inspection lot so that the movement to place the stock on unrestricted is cone for the new inspection lot.
Or is that any other way to do this???
Thanks in advance.
BMOAtul,
The inspection lot is created when the mobile is delivered from client and dismantled, and my stock gets increased for the returned material - that stock remains in Quality.
Later when the Usage Decision for the Inspection Lot is given (depending on the selection) my stock passes from quality to unrestricted, and this is the normal process without issues.
Possible exception:
If in the midle of the process I've to change the serial number for this mobile or to change the Material + serial number, the first Inspection Lot created is not helpfull to me because I can´t change there the Material or serial number. So the Usage Decision would be given for the old serial number, isn't it?
Today I found a Ztransaction that is used to create Inspection Lot. In the first step the material, goes in the warehouse in Quality and in the second step, when the Usage Decision is given, the stock passes from Quality to Unrestricted.
For the substitution Material / Serial number everything is correct, but for the first one it's not, should this obsolete stock goes to scrap?
Thanks,
BMO. -
Hi,
In my program, I want create an inspection lot with Function 'QPL1_INSPECTION_LOT_CREATE'. Before I created the inspection plan. I used control flags (RMQED) like the function 'CO_QM_INSPECTION_LOT_CREATE'. In 'QPL1_INSPECTION_LOT_CREATE' output, I have a subrc equalt to 0. Normaly, it must created a new input in QALS table but I have nothing!! I debuged the 'QPL1_INSPECTION_LOT_CREATE' and I see that the inspection lot obect number begin by 'TM' and not by 'QL'.
Why the 'QPL1_INSPECTION_LOT_CREATE' process doesn't show error but doesn't create the inspection lot and why the inspection lot obect number begin by 'TM'???
I see the functions 'OBJECT_NUMBER_GET_QL' and 'OBJECT_NUMBER_INSERT_QL'... but I don't know used it!
What the process to create Inspection Lot??
Thanks.Hi,
Refer this:
http://help.sap.com/printdocu/core/print46c/en/data/pdf/QMIMIL/QMIMIL.pdf
http://sapqminfo.blogspot.com/search/label/Inspection%20Lot%20Creation -
Create inspection lot move data from mseg to qals
hello.
When SAP create inspection lot from MIGO, I need to move mseg-ablad ( uploading point) to qals-yyfield.
In Migo we can have more than one pos, then system create differents inspection lot.
Is it possible ??? are there any user exit to do that ??? i see user migo's exist and inspecion lot's create, but in both cases i don't see all data to read an and move it.
Regards.
AntonioNamastey
In my case i have Migo with more than one position, and for each position the system will create a new inspecion lot.
Do you mean there are more than one Items in PO and for each Item there will be different inspection lot?
Then,
You need to get Material document number for inspection lot number and get MSEG-ABLAD which will be QALS-YYFIELD (YYABLAD).
I hope, I have understood your question!!
Amol. -
Create inspection lot in sales return
Hi Experts,
When doing sales return (VA01) and return delivery order (VL01N), if I need to create inspection lot for QA guys, what is required to set?
I have tried using SAP standard inspection type 06 or 10, no inspection lot is created.
Please help!
Regards,
DanielHi
Sales return inspection mainly deals with two scenarios: stock relevant and non stock relevant. 06 inspection origin/type is for non-stock relevant and the preferred one.
The basic setting is already explained in previous post. Now few things to done are:
1. Activate inspection type 06 for the materials
2. Make sure tick box is not checked for movement type 651 in QCC0Q-inspection-Insp lot creation-insp for good movement--deactivate quality
3. in Tcode VOV6, select schedule line category DN and check that movement type maintained in 651
4. Check your inspection plan usage is correct as per your inspection type setup.
Now your settings are completed for customer return inspection with 06 origin. Once any return delivery is done, a non-stock relevant lot will be created in SAP. -
QM - linking newly created Inspection Lot to an existing Notification
We have a business requirement to link a newly created inspection lot to an existing Quality notification. When defects are recorded in the Inspection Lot, the linked quality notification should be used as opposed to creation of a new notification.
I am able to create the document flow to point the existing notification to Inspection Lot. In essence when the user displays the notification using QM02/QM03 and goes to document flow the newly created inspection lot gets displayed.
Has anyone encountered similar business requirement? Any inputs will be very much appreciated.
Thanks!
Edited by: Sridhar Adurti on Aug 4, 2010 11:03 PMDear Burno
Linking an inspection with an existing notification is not possible.
But what can you do is create another notification for this. There is a funcationality in notification called as Related notification wherein you will get to know if there was a notification generation for this material before and it will also give you the inspection lot and all the details.
Regards
Gajesh -
Quality Inspection For WBS & Network Activity
Hi All,
In one our project scenario it is required that the qaulity inspection has to be perform for WBS or Network activity.
Can anybody explain me the steps.
Thanks,
VishalDear Vishal
QM in projects I dont think SAP has any solution currently available for this. Option available can be
1) Create a WBS itself as Quality Inspection. You can capture all the QM activities in this particular WBS
2) Create manaul inspection lot with reference to WBS and record the results.
Regards
Gajesh -
Trouble Creating Inspection Lot list
Hi,
I am trying to create an inspection lot for MAT 1 in plant 0001, but I'm gettin an error which says "No valid inspection type for material was found or selected".
Can any1 throw some light on it?
Regards,
Musarrat
Message was edited by:
Musarrat Husainhi husain
you have not maintained any inspection type for the material in QM view .first maintian the qm view for that material and specify the inspection type and make active
regards
thyagarajan
Maybe you are looking for
-
How to print page number in Pages
Please help. I have inserted the page number in my document and I see it the print preview, but when I print it just doesn´t print the page number.
-
Unable to create Indexes on F table
Hi We are unable to create Indexes on one of our Cube's fact table...I tried creating with Process chain , Batch and also tried with SE11 ...table name ... Indexes ...Activate... Its showing active object generated but the warning msg Index does not
-
TNT4882 interrupt driven driver, getting interrupt on entry into TACS
I am writing an interrupt driven driver for the TNT4882 device (one chip mode) running on custom hardware under the Radsys/Microware OS-9 operating system. I can receive an interrupt when the device is addressed as talker, entering TADS, but it may t
-
How manuplate data on multiple tables in the oracle resource adapter
Hi all, I have a requirement to write an resource adapter for oracle. But the key point is that, the user creation has to add entries in several tables and same goes with updation and getting the results. Please help me with the code snippet, if any
-
OS XP, using Internet explorer, Can't get on MZFF site to get to Help to check updates then download newest version of MZFF I am a novice at computers and since I had to uninstall Yahoo, my daughter told me to get Mozilla Firefox for a browser.