Create Inspection Lot for Serial Number

Hello,
Is it possible to create an Inspection Lot and associate it to a Serial Number right away.
I've done a process were I've change the Material and Serial Number of my equipment, so now the old inspection lot is not usefull no more and I would need to have a new inspection lot so that the movement to place the stock on unrestricted is cone for the new inspection lot.
Or is that any other way to do this???
Thanks in advance.
BMO

Atul,
The inspection lot is created when the mobile is delivered from client and dismantled, and my stock gets increased for the returned material - that stock remains in Quality.
Later when the Usage Decision for the Inspection Lot is given (depending on the selection) my stock passes from quality to unrestricted, and this is the normal process without issues.
Possible exception:
If in the midle of the process I've to change the serial number for this mobile or to change the Material + serial number, the first Inspection Lot created is not helpfull to me because I can´t change there the Material or serial number. So the Usage Decision would be given for the old serial number, isn't it?
Today I found a Ztransaction that is used to create Inspection Lot. In the first step the material, goes in the warehouse in Quality and in the second step, when the Usage Decision is given, the stock passes from Quality to Unrestricted.
For the substitution Material / Serial number everything is correct, but for the first one it's not, should this obsolete stock goes to scrap?
Thanks,
BMO.

Similar Messages

  • Creating inspection lot for vendor returns

    Hi All,
    In Subcontracting, components are sent to vendor using Mov Type 541, if vendor returns the components without any value addition we recieve the goods with Mov type 542.
    Now, when we recieve the goods using 542 customer requires that the material has to be posted to quality inspection and a lot has to be created.
    I have already tried with inspection type 08 but its not working.
    Any ideas how it can be done?
    Regards
    Naveen Goveas

    Hi Naveen,
    You have come across a common problem in later releases of SAP. Ram is nearly right in the settings for control of inspection lots for goods movements. In the standard system movement type 542 has no inspection lot origin assigned, so even if you have maintained an inspection type for your material there is no "trigger" for the inspection lot creation from that movement type. Unfortunately, you cannot change the inspection lot origin settings for movement types. The only choice you have is to create (as a copy) a customer defined movement type (one which already has the appropriate inspection lot origin assigned) and use that instead. You have to also be careful about the 'Quantity' and 'Value' updating strings for your new movement type.
    Hope that helps.
    Colin

  • Inprocess inspection lot quamtity & Serial number

    Hello,
    Sr. No. is generated after confirmation of sales order.
    The production order is released & the inprocess inspection lot is generated. Production order quantity is 20.
    Now the question is:
    1. Why the inspection lot quantity always appears as '1'.
    2. If in inspection setup, sr. no. possible is checked, then why (or how) sr no.s can be seen automatically during result recording (inspection unit number) field.
    Regards

    Hi Hemant ,
           In configuration for serial No go to spro ->plant maintenance and cutomer service ->Technical Object--> serial No management -
    >Serial No profile -
    > serial no procedure -
    > Qmsl and mmsl  serial No usage should be 3
    so that what ever serial no assign to the GR will coming in the inspection lot and at the time od ud you can select accepted serial no only
    with regards
    Yashodhan

  • Transfer inspection lot with serial number

    Hi !
    I'm using tx QAC2 but my material does have a serial profile and it gives me an error "You cannot make a transfer posting without a serial number" ...
    I have tried changing the serial number profile to optional or none without succes.
    Does anybody knows how can i make this work ???
    Thx !

    Dear,
    First extend the material for the respective plant you want to transfer . In that maintain sane serial no. profile & same inspection type in QM . This will definetly solve your problem .  Revert back for your queries...
    Regards,
    Atul

  • Not creating inspection lot for STO

    Hi ,
    I have two plants X(Supplying) and Y (Receiving).
    In material master in quality 01 and 08 (inspection type) for plant Y active.
    Process as folllow:
    1)STO with U (acc assignment) created.
    2)VL10B ,created delivery.
    3)Vl02n PGI
    4)Migo GR for STO did in plant Y.
    but stock is not going in quality instead of this it is going in unrestricated.
    Guys please throw some light ,why system is behaving like this.
    Regards
    Sowmya

    Hi,
    In your STO purchase order in Delivery tab check if  stock type is " X Quality Inspection"
    Check in Material master updated inspection types 01 and 08 are checked as active
    In material master quality view Post to inspection stock check box is active
    Thanks
    Diwakar

  • DIAPI - Create Goods Receipt for Serial Number - on Release Only

    Hi Experts,
    I need your advise to create Goods Receipt by using DIAPI, where the item is managed by Serial Number - on Release Only.
    The option that I'm exploring is to use ‘Automatic Serial Number Creation on Receipt’ turned on.
    In standard SAP function with the above setting, we can create a Goods Receipt without entering any Serial Number, and SAP will automatically creates empty Serial Number. I'm trying to do the same thing by using DIAPI with the below code.
    oTargetDocument.Lines.ItemCode = 'abc'
    oTargetDocument.Lines.WarehouseCode = 'whs'
    oTargetDocument.Lines.UnitPrice = 100
    oTargetDocument.Lines.BinAllocations.BinAbsEntry = 1
    oTargetDocument.Lines.BinAllocations.Quantity = 1
    oTargetDocument.Lines.Quantity = 1
    '--       I skipped the below code, expecting SAP will create the empty Serial Number automatically
    '     oTargetDocument.Lines.SerialNumbers.SetCurrentLine(0)
    '     oTargetDocument.Lines.SerialNumbers.InternalSerialNumber = 2
    '     oTargetDocument.Lines.SerialNumbers.Add()
    '     oTargetDocument.Lines.BinAllocations.SerialAndBatchNumbersBaseLine = 0
    oTargetDocument.Add
    But, it returns 1470000838 - Invalid "SerialAndBatchNumbersBaseLine"; specify a valid "SerialAndBatchNumbersBaseLine"
    Can anyone please advise how we should achieve this?
    Any example or reference is very much appreciated.
    Thank you and kind regards,
    Krisma

    Hi Krisma,
    I was trying to simulate the issue here, but I couldn't post a good receipt PO even from the SAP itself with the setting you mentioned.
    I have set the management method as 'On Release' and ticked the Automatic serial number creation flag as well under general settings of inventory. Is that the setting you mentioned or something else?
    Best Regards,
    J S L Geeganage

  • Creation of Recurring Inspection Lots with Serial numbers

    Hello,
    We have the following scenario at our client :
    <i>MIGO_GR</i> is used to create GR for materials with Serial number requirement. The serial numbers can be generated automatically or manually entered on the screen. At this point of time, the Shelf Life expiry date & Next Inspection date are calculated based upon the Production date. The Batch gets created with Next Inspection date, Inspection Lots are created and the Serial numbers are assigned by the system. The stock moves into QI.
    The stock is moved from Quality restricted to Unrestricted stock via <i>QA11</i>. The serial numbers are handled by the system or can be managed on screen.
    Transaction <i>QA07</i> (Deadline Monitoring of Batches) is used to create Recurring Inspection. QA07 gives error message IO304 that "<b>Only 0 serial numbers entered instead of 1</b>". The problem is that system doesn't pick up the corresponding serial numbers.
    OSS # <u>497845</u> mentions that Transaction QA07 can not handle serial number. The serial numbers are very critical to the business process.
    Has anyone come across this situation before ? Please suggest solution or workaround. I tried using BAdI "<b>INSPECTIONLOT_UPDATE</b>" & was able to create Inspection Lots with serial number assignment, also manipulated Batch to change the Next Inspection date. The problem is Material Movement (322) Document does NOT get created.
    Also tried implementing BAdI as per OSS # <u>608830</u> but doesn't give desired results.
    Any help is greatly appreciated.
    Best Regards,
    Homiar Kalwachwala.

    Hello all,
    Just wanted to bring this on top to be noticed.
    Would appreciate any help, suggestions...
    Regards,
    Homiar.

  • Inspection lot for external service

    Hi Gajesh/ Sujit/shyamal/ all
    we are planning to use service master for external vendor's service, i have couple of questions
    please share your experience, if anyone of you come across this kind of requirement
    1. is it possible to create an inspection lot for external service?
    2. we want to capture / validate the vendor's external service, weather it is accepted or not? sometime we need to enter quantitative value also
    3. is there any setting or config for assign /create inspection lot for service master?
    what I know is without material master we cannot create inspection lot but i don't know about service master.
    thanks
    Sami

    Gajesh,
    thanks for quick response.
    2 business req. are as follows
    1.  vendror is performing periodic service, MM side external service order (service contract/PO)created, bsaed on thatPO vendors performing service.
    service entry sheet they are capturing man hours and date of service.
    business wants quality of service to be captured in QM inspectiion lot.
    2. production order ---> routing -- operation ---> vendor & service PO number  assigned external work --> now inspetion lot will be created for that material/production order.
    how can we link service master, service entry sheet and inspection lot?
    how to map for this req.?
    again is't possible to create inspection lot for service master?(without material master)if your answer is yes, then where/how can we assign inspection type ? which inspection type?
    thanks
    Sami

  • MFPR - Processing Inspection Lots for Production versions issue

    Hello,
    User are not able to seeing line item to create inspection lot for a specific part number.
    I checked inspection set up in  material master, rate routing, and compared with similar part numbers.It all looks good to me.
    Any help would be greatly appreciated!!
    Regards,
    Owais

    In REM Inspection lot for Inprocess is generated for header material for which you actually define "production version".
    Line items can not be seen in MFPR.

  • Automatic creation of inspection lot for Expired Batches

    Hi All,
    I am in one trouble and need some help in above scenario.
    I am able to create inspection lot for batches about to expire, but how to create inspection lots for batches which were already expired or which next inspection date already missed?
    Master data like '09' inspection type, inspection plan is already maintained.
    Second question, is QA07 also affect on special stocks like vendor stock or project stock etc?
    Immediate response will be appreciated.
    Thanks

    Hi
    To meet you above mentioned requirement you have to modify the program RQAAAS10 as per your logic both to create lot for Expired Material and to consider project stock or vendor stock as In standard SAP these stock are not considered.
    regards
    Manish

  • How to create inspection lot manually without using QA01 Transaction code?

    Hi,
    Please anybody give procedure for creating Inspection Lot Manually without using Transaction Code QA01

    Hello, Srinivas,
    If you want another T code only then you can try QA01A.
    or you can create a Physical Sample with QPR1 and then click on the button there to create inspection lot. To create inspection lot for that Physical sample (you will able to see that button only after releasing the sample) Or you can use QPR5.
    But let me know the reason why you want T code other than QA01.
    Regards,
    Shyamal

  • Creating inspection lot  in REM

    Hi
    In REM(Repetitive Manufactruing) Scenario: 
    Is their any possibility to create an inspection lot.
    1) At the first GR and no more at subsequent GR or;
      2) at each GR?
    Thanks in advance
    Saravana

    Hi kumar
    if you want to create inspection lot for REM then following are the settings
    1. inspection type 13 for inprocess check for repetative with task list selection
    2.  maintained inspection characteristics in rate routing for which you want to maintained inspection.like inspection point
    3. Inspection creation by tcode MFPR which creates inpsction lot for your production version. manually,
    Regards
    Pravin

  • Inspection lot for sale service order

    Dear all,
    Is it possible to create inspection lot for service order created in sale and distribution?
    I have a sale document type against which services are sold. I want when service order is created inspection lot trigger.
    Thanks to all.

    I believe the service order is simply a different type of maintenance order.  You should be able to create inspection lots for these in a similar fashion as used in maintenance orders.  I.e inspection types 14 are used.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/2d/352264448c11d189420000e829fbbd/frameset.htm
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/e9/92b917f6dc11d19296ab92e885eaaa/frameset.htm
    There are many places in the services help files that mention using inspection lots.  The two above are just a couple of them.
    FF

  • Create inspection lot in sales return

    Hi Experts,
    When doing sales return (VA01) and return delivery order (VL01N), if I need to create inspection lot for QA guys, what is required to set?
    I have tried using SAP standard inspection type 06 or 10, no inspection lot is created.
    Please help!
    Regards,
    Daniel

    Hi
    Sales return inspection mainly deals with two scenarios: stock relevant and non stock relevant. 06 inspection origin/type is for non-stock relevant and the preferred one.
    The basic setting is already explained in previous post. Now few things to done are:
    1. Activate inspection type 06 for the materials
    2. Make sure tick box is not checked for movement type 651 in QCC0Q-inspection-Insp lot creation-insp for good movement--deactivate quality
    3. in Tcode VOV6, select schedule line category DN and check that movement type maintained in 651
    4. Check your inspection plan usage is correct as per your inspection type setup.
    Now your settings are completed for customer return inspection with 06 origin. Once any return delivery is done, a non-stock relevant lot will be created in SAP.

  • Creation of inspection lots for vendors

    Hello friends,
    How can we create inspection lots for all vendors at a time? I want to record results for my vendors(near about 2000 no.) by inspecting their raw matwrials in a lab.

    Hi Kiran,
    Why you are going for manual lot creation if the scenario is like above?
    1.     Assign inspection type 01 to material master
    2.     Prepare an inspection plan through QP01 with usage 5
    3.     Inspection lots will get generated with lot origin 01 whenever you do good receipt through
    migo with 101 movement type
    Conclusion: Inspection lots will get generated automatically whenever you do good receipt with vendor material combination.
    Best Regards,
    Anand Rao

Maybe you are looking for

  • Can I include raw files into the installer folder with LV application builder?

    Hello, I have created a batch file that will run at the end of the installer, which will copy over some raw configuration files into the source destination so that the configuration files can be customized for each end user without rebuilding the ins

  • Animation preset--one letter at a time

    I am looking for a text animation preset that shows one letter at a time. I have tried several of the presets and applied a mask, but I am assuming there is an automated way to do this, either with a preset or an expression of some kind. Lee

  • After OS Upgrade, Computer will No Longer Boot from Disc, Enter T-Disc Mode

    I purchased the Leopard update about a week ago and proceeded to install it (upgrade option) on my MacBook Pro previously running Tiger. After this update, I no longer seem to be able to boot from a disc(c on startup), enter target disc mode(t on sta

  • PSE5: edited photos not displaying in organizer

    from organizer, i choose "go to quick fix" for a particular photo (or set of photos). I complete the auto smart fix. upon closing, i choose yes to save the photo. under save options: i have checked "include in organizer" and "save in version set with

  • Can't import messages using Communication Centre

    I am trying to import messages to my phone using the Communicaiton Centre. However the 'Import' command is greyed out under messages view and only available under 'Contacts' view. The help file says: "Importing messages from a text file To import mes