Create Instruction Manual with same style, different languages?

How to create a book with graphs and tables (instruction manual) in one language and create afterwards many different linked copies where just the language should be manually changed? While editing the original (graphs etc..) the copies now should change the same way except the language.
Best regards,
andreas

Layers seems okay, but I'm not sure to work practical on this in fact the book has 400 pages?
So if I unterstand you correctly, you meant that I should create one layer for every language and within e.g. Layer EN I will create every english textfield and so on.
I'm just not sure how to handle the different size/length of the different languages within the same document, to don't destroy formatting.
For example width of tablecolums: FR (language) wording is longer than EN wording.
For one language I need one extra line at the end of one passage..
best regards!

Similar Messages

How To Create Table View With Same Column name But Different Table?

Hi All,
I have the problem to create a tableview with same column name but in different table.
The Table that i have:-
Table - PAC051MPROFORMA
Column - mrn,visitid
Table - PAC051TPROFORMA
Column - mrn,visitid
Table - PAC052MTRANSBILL
Column - mrn,visitid
Then i want to create a table view to view that table. This is my SQL
CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
As Select PAC051MPROFORMA.mrn,PAC051MPROFORMA.visitid,PAC051TPROFORMA.mrn,PAC051TPROFORMA.visitid,PAC052MTRANSBILL.mrn,PAC052MTRANSBILL.visitid
where
*(a.PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)*
and
*(a.PAC051TPROFORMA.mrn=PAC052TRANSBILL.mrn)*
That SQL Return this error = ORA-00957: duplicate column name
Then I modify that SQL to
CREATE VIEW pacviewproforma (mrn,visitid)
As Select PAC051MPROFORMA.mrn,PAC051MPROFORMA.visitid,PAC051TPROFORMA.mrn,PAC051TPROFORMA.visitid,PAC052MTRANSBILL.mrn,PAC052MTRANSBILL.visitid
where
*(a.PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)*
and
*(a.PAC051TPROFORMA.mrn=PAC052TRANSBILL.mrn)*
This time this error return = ORA-01730: invalid number of column names specified
What should i do?
Thanks...

Hi,
SQL> CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
2 As Select
3 PAC051MPROFORMA.mrn,
4 PAC051MPROFORMA.visitid,
5 PAC051TPROFORMA.mrn,
6 PAC051TPROFORMA.visitid,
7 PAC052MTRANSBILL.mrn,
8 PAC052MTRANSBILL.visitid
9 from PAC051MPROFORMA,PAC051TPROFORMA,PAC052MTRANSBILL
10 where
11 (PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)
12 and
13 (PAC051TPROFORMA.mrn=PAC052MTRANSBILL.mrn);
CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
ERROR at line 1:
ORA-00957: duplicate column namePlease give different names to each column.
Something like this..
SQL> CREATE OR REPLACE VIEW pacviewproforma (MPROFORMA_mrn,MPROFORMA_visitid,TPROFORMA_mrn,TPROFORMA
_visitid,MTRANSBILL_mrn,MTRANSBILL_visitid)
2 As Select
3 PAC051MPROFORMA.mrn,
4 PAC051MPROFORMA.visitid,
5 PAC051TPROFORMA.mrn,
6 PAC051TPROFORMA.visitid,
7 PAC052MTRANSBILL.mrn,
8 PAC052MTRANSBILL.visitid
9 from PAC051MPROFORMA,PAC051TPROFORMA,PAC052MTRANSBILL
10 where
11 (PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)
12 and
13 (PAC051TPROFORMA.mrn=PAC052MTRANSBILL.mrn);
View created.
SQL> DESC pacviewproforma;
Name                                      Null?    Type
MPROFORMA_MRN                                      NUMBER
MPROFORMA_VISITID                                  NUMBER
TPROFORMA_MRN                                      NUMBER
TPROFORMA_VISITID                                  NUMBER
MTRANSBILL_MRN                                     NUMBER
MTRANSBILL_VISITID                                 NUMBER
ORA-01730: invalid number of column names specifiedThe list of column nmae you specified during the CREATE VIEW should match with the SELECT list of the view.
Twinkle

How to create two employees with same name as supplier record?

Dear all,
We need to create a supplier record for an employee so that we can issue invoice for pretty cash payment. If there are 2 employees with same name, how can we create supplier records for these 2 employees? The system does not allow duplicate supplier name.
Please advise.
Regards,
HY

Hello,
In R12 it is possible to create 2 employee with same name but different employee number.
And also possible to create these 2 employees as suppliers in Payables.
HTH,
Vik

How to create logical directories with same name on two databases

Hi,
OS: Windows
Oracle Version : 10g
I have to databases in one oracle home. I have created some logical directories in one database. When I am trying to create logical directories with same name in another database, it is overwriting the first database directory paths with the second one
Can't we create directories with same name but different path in two databases on one machine?
Pls suggest me on this
Regards,
Vijay

I am trying to create logical directory using CREATE
DIRECTORY statement. I am very much aware that the
create directory statement doesn't create directory
on OS. But we can attach the physical directory on OS
to logical directory in oracle
My requirement is to create logical directories in
oracle mapping the OS directories. Both the
databases, wil have same logical directory names but
different OS directory mappingsIf I understand you correctly, you can do this:
On DB 1
CREATE OR REPLACE DIRECTORY same_dir_name as 'C:\myoracle\mydir1';
On DB 2
CREATE OR REPLACE DIRECTORY same_dir_name as 'D:\myoracle\mydir2';
What stops you from doing that ?
Note: If what you have is one database but different connections, then you are connecting to one database. The above second statement will drop and replace with the first one

To create multiple files with same content but with different names

Hi SapAll.
here i have got a tricky situation on Idoc to File Scenario.
in my interface of an Idoc to file ,there is requirement to create multiple files with different file names but with same content based on one Idoc Segment.
which means there will be one Zsegment with two fields in the idoc,where one field with (content refers to the name which file name should start with .so lets say if this segment is repeated for 3 times then PI should create 3 files in the same directory with same content but with different file names (from the filed).
so here for now iam using one reciever file communication channel.
can any body give me the quick answer.
regards.
Varma

What do you mean by different names?
when i make proper setting in the Receiver Channel....on how to create the filename (what to append) like add Timestamp, counter, date, messageid.....even in this case you will ahve file with different names and that too from same File channel.
You can perform multi-mapping in XI/ PI and then your File channel will place the files in the target folder with relevant names. You cannot use Dynamic Configuration with Multi-Mapping!
If you intend to use different File channels, then do the configuration as required (normal)...even over here you can follow multi-mapping.
Do not use a BPM!
Regards,
Abhishek.

Not able to Export sap script with RSTXSCRP in different languages IT,ES

Hi all,
I am trying to export sap script to local file using this program RSTXSCRP, but it's working fine for English but not other languages like IT,ES and DA. Even if i specify parameter in selection screen Language vector as IT. It's not exporting code from sap script for IT language. By default it's exporting only EN.
Can you please tell me what I have to do to export sap script from different language.
Thank you.

Hi!
For Translating you can do it by
Going in transaction SE63 -> Translation -> Abap objects -> Other Long Texts -> FS Forms and Styles.
There you have to enter client and form name source lang. and target lang.
Then you export it with the program RSTXSCRP in the language u have translated....
As you have form created in English and you can download and upload it in only English .
Regards.

How to create device IDs with same name

i am using SE 3310 and its creating different device ids for each node sharing it . since I will be building a RAC enviornment I need these IDs/name to be same .
for example on one node the lun id is /dev/rdsk/c3t0d0s6 but the same lun id on node 2 is /dev/rdsk/c2t0d0s6.
In past with an old storage array I fixed this issue by creating links in /dev/rdsk for c3t0d0s6 ---> c2t0d0s6.
my question is : is there a way in SE3310 that device ids get created with same name or do i still have to rely on creating these soft links ?
thanks
Note: since i need the answer to this quickly i will wait a while and then post this question in other forums and i will update the question here with the answer .

This could be a Solaris (I presumed) O.S. question rather than SE3310 or storage question.
The logical device (/dev/[r]dsk/*) is the work of the O.S. when it first configures the device, in this case the LUN from your SE3310.   I can go in depth on how the cX number happens (due to device probe order, driver differences, history of device discovery due to need of persistent device naming, etc...) but ... it's a really long story and is really quite irrelevant and most people should not be interested...
If you have COMPLETELY identical servers, i.e. identical hardware down to specific HBA in specific slot are the same,   and if you make sure that luns are presented to all servers exactly the same way, same order, and any changes are seen by all servers in the same sequence, in theory, all /dev/rdsk/* devices will be consistent across servers.
But that's still rather irrelevant.    Application that is designed to work in a redundant environment should not be dependent on logical devices like /dev/rdsk being the same.
So ... in effect this is also not a question for the Solaris forum, but rather a question for those familiar with RAC, how to configure such that device access is done "safely" through actually identifying the lun rather than assuming /dev/rdsk are consistent.

Same article, different languages help!!!

Hi,
I have a project for a client which requires one article per folio (4 folios in total), each article has two language optins, English and Chinese.
The problem I'm having is that when you get to the end of the first article, (lets say the English version), if I continue to scroll the Chinese version automaticaly apperas. What I need to happen is the language options to only be chosen via the language buttons I've set up. So in essence hiding one language article from the other until it's called for.
Does anyone know how I can achive this?
Cheers
L
P.S this is my first project with DPS so bare with my lak of knowledge.

Hi Christophe,
Thanks for your reply.
The design is a very simple, it's simply two identical articles but in different languages.
So it's not really buttons, the problem is that I need the English article not to continue into the Chinese article while scrolling.
But thanks I will look through the tips link you sent and see if I can solve it.
Cheers
L

Creating 50 users with SAME password

All
I need to create 50 Trainning users with SAME password.
Does SAP allows to do it ? SU10 does not let me know
enter the password ?
Is there any report that I can use ?
How can use SCAT trasaction to do this ?
Please advise.
Thanks
From
PT.

Hi Pranav,
Yes SAP allow you but for security reason its not recomended.
But you can't give the password same like the username, SAP will not allow your to give password that contain userid.
You can use SCAT to create the 50 user.
First you recard the transcation first
Than change the value with parameter (type &parameter_name)
and than you can create a excel file that contain the 50 user.
and use SCAT to run it.
Please read:
http://help.sap.com/saphelp_47x200/helpdata/en/f4/3f9ef659a711d1bc84080009b4534c/content.htm
or
http://help.sap.com/saphelp_47x200/helpdata/en/fd/f10538d6cb1e3be10000009b38f8cf/frameset.htm
Regards,
Fendi Suyanto

Create new application with same ID as a previous application

10gR2, webtogo client. We are in a situation where due to what looks like some corruption issue/inability to publish correctly, we may need to drop our existing application and re-create. So the application will have a new applications.id. applications.dsn and applications.publication value. This will most certainly force all our offline users to do a re-install which we want to avoid. (correct? - I'm assuming the offline databases like a1121.odb are keyed to the 1121 applications.id)
Wondering if there is any way to re-create a new application but with the old application ID. One way we think we could do this is that after dropping the application, reset the mobileadmin APPIDS sequence so that it will pick up the ID of the old app when we create the new one. And so have the same applications.id. applications.dsn and applications.publication value.
However, wondering if we do this, we'd cause some other issue. Anyone have any ideas? (we have ticket open for the publication problem, but not much progress yet on that end.)

You may create new mode with the same transaction.
I'm not sure, that you may just "copy-paste" the content from one mode into another.
To create new mode with the same transaction, you may use the following code:
data: l_current_tcode like sy-tcode.
move sy-tcode to l_current_tcode.
    CALL FUNCTION 'TH_CREATE_MODE'
      EXPORTING
        transaktion    = l_current_tcode
        del_on_eot     = 1
*        PARAMETERS     = l_pars
        process_dark   = 'X'
      IMPORTING
*        mode           =
      EXCEPTIONS
        max_sessions   = 1
        internal_error = 2
        no_authority   = 3
        OTHERS         = 4.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
What transaction do you need to display?
Message was edited by: Cyrill Smirnov

Motion Menu backgrounds are the same through different languages... why?

I'm building a project with several still menus, but one motion menu for main title. The Project has two languages, Spanish and English, and I've created the menus for both languages. Still menus have the same background and different text objects. The motion menu has different video backgrounds for each language, and the same overlay for both. So far so good, everything works as expected in the simulation window, I can see the desired background after setting the language menu preference.
Then I build the project and... DVD player shows only the first language background, no matter the language I choose in preferences. But this happens only in the motion menu, still menus work fine.
I opened the menus VOB in the build folder with MPEG Streamclip to check what happened, and the same video background appears twice. Other commercial DVD's I've checked show the different backgrounds sequentially, so the player chooses which point of the VOB must be played according to player's SPRM 0 setting.
I tried altering the order of languages in DVDSP outline editor, I had Spanish first then English, and after swapping them and building again, the menus VOB shows English background twice.
The result is no matter which language I choose to see, I always get the one that is first in outline editor.
I also tried, just for checking, assigning different text objects to both languages, and they do work as expected. But since the menu has an intro with a loop point where I want the text to appear, this is not a deffinitive option for me.
I understand this is a bug in DVDSP, so the question is... any workaround anyone may think of?
If someone knows how I can edit the vob manually that would do for now.

Hi DGuerra, based on a past thread, the missing comments may be related to using avast! and its browser add-on(s).
Firefox is so easy to customize that it's not really surprising to find differences between two systems. These can relate to the menu choices (orange Firefox button or classic menu bar), toolbar layouts, and of course, add-ons.
If you have a preference for one setup versus another, hopefully these articles can equalize some of those layout issues:
* [[Display the Firefox button menu instead of the menu toolbar]]
* [[Customize Firefox controls, buttons and toolbars]]
You can compare extensions on the Add-ons page. Either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Extensions.
Perhaps you can get the two side-by-side to make it easier, or to extract a text list, you can use the troubleshooting information page. Either:
* Help > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
The button in the upper left corner "Copy text to clipboard" will grab the configuration information from entire page.

Need help in Creating DB manually with OFA

Hi,
I want to create database in 10g manually and for this purpose
I need help.
since we can use OFA for storing Control files, and redolog file
and datafile by describing them in Create database command but
how to store any instance related file like spfile, pfile or network
related file.
once the oracle 10g database software is installed then if we want
to create database then how can we separate the database file and
all other instance files from software binaries because I've noted
that creating database with DBCA create all instance files along with
binary files of the software although DBCA give you option of creating
database related file in some other location/directory.
kindly help me in this I want to achieve above task in compliance with
OFA
Thanks and Regards,
D.Abbasi

Abbasi wrote:
Hi,
I want to create database in 10g manually and for this purpose
I need help.
since we can use OFA for storing Control files, and redolog file
and datafile by describing them in Create database command but
how to store any instance related file like spfile, pfile or network
related file.
once the oracle 10g database software is installed then if we want
to create database then how can we separate the database file and
all other instance files from software binaries because I've noted
that creating database with DBCA create all instance files along with
binary files of the software although DBCA give you option of creating
database related file in some other location/directory.
kindly help me in this I want to achieve above task in compliance with
OFA
Thanks and Regards,
D.AbbasiTHe OFA spec (as best I recall) states that one of the levels of directory for all of your data files will be the db name. So if you name your database 'orcl', every file system in which you keep any files related to 'orcl' will be in a directory name 'orcl'.
As for what happend when you created your db. Oracle will default to putting things in the Oracle home structure because that's the only thing he can guarantee will be there. But you had the option (indeed, the obligation) to override these defaults.
BTW, when using dbca, if you chose any of the pre-canned database types, the database will be created by doing a restore from a pre-canned backup. If you chose 'custom' database, the database will be created by way of a CREATE DATABASE script. It would be instructive time well spent for you to go through dbca and select 'custom database', pay attention to all of the options as you work through, then at then end, deselect "create database" and select "generate scripts". Do the same for one of the pre-defined database types. Then study the scripts generated by each method.
Edited by: EdStevens on Aug 16, 2009 8:46 PM

How to create new user, with same personal files, for troubleshooting?

I cannot find this answer in "Finder Help", nor in the Community discussions thus far. What I must do to troubleshoot the spinnign beach ball: My next step: I must troubleshoot my friend's iMac running Mac O.S 10.6.8 by setting up a new user, called "Test". This I can do easily. However, what I am unsure of is this: as this "new user", actually just me as a tester, I must be able to access the same email, Word files, Desktop, photos, etc. that I used to access. How, then? Copy all into a shared folder or what? There must be a less cumbersome way. I do NOT wish to delete anything. Of course, I have justmade a perfect backup of everything on my hard drive. Please advise re my next step: sharing the "User" little house files, with myself, as the new, possilbly temporary, user. Thank you so much, anyone and everyone!

You shouldn't do any of that for troubleshooting. The test user account should be pristine. If you copy stuff from the old account, then you also copy whatever is causing a problem.
Just use the Accounts/Users & Groups preferences to create a second user called, "test." Make this user an admin user. Then log out of the old account and log into the new one. That's it. You can still access and use applications in the Applications folder if you need to test third-party applications.
We could be more helpful if you explain just what you need to troubleshoot. If just the spinning beachball is your issue, then visit The XLab FAQs and read the FAQ on resolving the SBOD problem.
If the computer is simply running slowly then read the following:
Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with visits to:     OS X Maintenance - MacAttorney;
                                  The X Lab: The X-FAQs;
                                  The Safe Mac » Mac Performance Guide;
                                  The Safe Mac » The myth of the dirty Mac;
                                  Mac maintenance Quick Assist.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
Repair the Hard Drive - Lion/Mountain Lion/Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Restart your computer normally and see if this has helped any. Next do some maintenance:
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
Suggestions for OS X Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
Troubleshooting Applications
I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
    used to manage backups and to restore backups. Time Machine
    requires a backup drive that is at least twice the capacity of the
    drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Referenced software can be found at MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

Can't import RAW and psd file with same name different extension

Trying to import a folder of images from desktop that I have been working with in Bridge CS3.
LR won't import a RAW file that has a PSD file by the same name. Tried renaming the PSD and deleting the one with the same name, but says it is still there and won't import the RAW file - What is the correct workaround on this? Why can't it import same name files with different extensions?

A forum search for 'RAW + JPEG' will give you more posts on this than you care to read. This will change. For now, import the RAW and PSD's from separate folders and then move them together for within LR.
LR is seeing the RAW as a sidecar to the PSD. It is an unforseen effect of the RAW + JPEG thing where they decided to not import the JPEG, seeing it as basically a preview image for the RAW.
LOL
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

Smartforms : Probelm with Text in different languages.

Hi,
In development server in client 500 and language EN i create some new text coping existing text and change the text. These text are visible in language DE using transaction smartforms.
I try to check the form in development server client 510 language EN. the changes are present but when i try to see the change in client 510 languare DE the changes doesnot exists. The New text contains the same text as the original text which was copied. both having the same text.
Can somebody help here.

Hi ,
Even without translations if you do the changes in Smartforms in DE language it will reflect in other client, check the smartform is activated properly in DEV client.
For translation for your info:
SE63-> Menu TRanslations->R3 enterprice->otherlongtexts->smart forms.
Give the name of the smartform and source and destination language.
Once you do the translation you need to activate the Smartform.
The above navgations deffres woith SAP version.
Rajesh.

Create Instruction Manual with same style, different languages?

Similar Messages

Maybe you are looking for