Create iPad or AppleTV version bug...

Maybe I'm missing something here but I have a home movie done in widescreen for an iDVD project. I also like to put these on my AppleTV. Before the iTunes upgrade I would have it convert the file for AppleTV and everything was fine. Now the option includes iPad and it now forces my widescreen movie to a 4:3 format! Even if I viewed it on the iPad I want the black bars at the top and bottom like it should be and to view it as widescreen on my AppleTV.
I'm guessing there's no way to adjust this export setting in iTunes to keep the ratio correct so how else could I convert the .mov file for AppleTV? Handbrake won't take the format.
TIA!

I've now tried to restart iTunes, restart the iMac, re-install iTunes (10.1), trash preferences and attempt converting previous files that I had successfully exported as 16:9. Everything is still 4:3.
Is this a known bug? It literally just started happening after a string of successful exports.
Is there an alternate way to fully un-install iTunes, prior to re-installing? Is there a preference file for conversion formats?

Similar Messages

Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?

Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?

Same problem here (no graphics in header or footer) and the problem has been reported months ago. It is another bug/feature lost when Apple moves from 09 to the iCloud-compatible versions. Complain to Apple, you may have better chance than me and they may finally listen to their users....

Pages crashes when opening any document on iPad 3 Latest version. I could find on the net and finally deleted Pages from my device and reinstalled it. Still when I try to create anew document or open a document it just cr

Pages crashes when opening any document on iPad 3 Latest version. I tried everything I could find on the net and finally deleted Pages from my device and reinstalled it. Still when I try to create a new document or open a document it just crashes out.

Try this:
Make sure IOS is updated to latest version
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings

Since upgrading iTunes 10.5.1.42, I have been unable to use the "Advanced - Create iPad or Apple TV Version" to convert movies.

I have been unable to use the "Advanced - Create iPad or Apple TV Version" to convert my movies for use with my iPad2. The movie will go through the conversion process, and is the correct length, but the video is a black and there is no sound? Has anyone found a similar problem? If so, what can I do to fix the problem? Before I used Handbrake to convert the videos which worked well, but now that is not working either .

No, there is no direct download link. Those are days of the past, I'm afraid. You may need to reinstall Mavericks.
Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.

When I plug in my iPad 2 to my laptop to sync, it says "the file iTunes library itl" cannot be read because it was created by a newer version of iTunes. Can someone please tell me what this means? How do I correct it? Thanks!

When I plug in my iPad 2 to my laptop to sync, it says "the file iTunes library itl" cannot be read because it was created by a newer version of iTunes. Can someone please tell me what this means? How do I correct it? Thanks!

The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash

My numbers program created on my mac version 3.0 won't work on my ipad version 2.0. It says I have to save the file with preview option but there is no such option in preferences. Any thoughts?

my spreadsheet created with numbers program version 3.0 created on my mac won't work on my ipad version 2.0. It says I have to save the file with preview option but there is no such option in preferences. Any thoughts?

For the update to run Aperture must be installed in the system Application folder and named simply Aperture, not Aperture3.2.2 or anything else.
I don't know if this would also affect photo stream but if your Aperture is misnamed or installed in an incorrect location fixing that to see if it clears up the problem would be a good first step.

HT203180 I am a new user. I have created iPad versions of videos, but I can't get them to synch from my iMac to my IPad

I am a new user. I have created iPad versions of videos, but I can't get them to synch from my iMac to my IPad. I have consulted the Help section, but the videos do not appear in the iTunes library as movies.

Pad2, the new iPad Supported Video Formats & Movie Formats
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
You can use a USB flash drive & the camera connection kit to import the videos.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom

IPad to AppleTV sound only - built in Video App

I used to be able to airplay from my ipad to my appletv but now only sound plays, no video. I have made sure my iPad and AppleTV (latest version) are all running up to date software.
I am trying to play via the built in Video app on the iPad , not a third party app.
This used to work.
How can I get it working again. I've also tried restarting the Apple TV and the iPad multiple times - didn't help

My router is an Airport Extreme. It's a Walking Dead Episode I bought on iTunes.
I worked at Apple in Core OS doing Mac OS X kernel development for 21 years so I know something about Apple products. This is some kind of bug and not ''user error''
I can occasionally get it to play a video by constantly trying over and over again and also restarting my ipad and appletv - there is no rhyme or reason as to when it will actually play and episode. And then the next time I try it will just do the sound again.
This did not used to happen - probably 2-3 months ago it would play 100% of the time
Really annoying.

Can't open pdf-files in my iPad 3 (New Version)

My pdf-files on my Cloud Drive (at one.com) does not open with Acrobat Reader 10.3. The message I get i that the document is emty 0 kB but thats not true. My iPad is using version iOS 6.0. Why is it like that and what can I do to get it right?

Hi Steve,
I have to login to my own CloudDrive at one.com using my app "One.com for
iPad". In the CloudDrive, I have a (standard Windows) folder containing
documents, pictures, music, etc including a couple of pdf-files, some
jpeg-files av a ppt-file. I open the file by clicking on it and for the
pdf-file, I select the app Adobe Reader to open the file. The ppt and jpeg
files open automatically (don't have to chose any app) when I click on them.
The app starts to download the pdf-file but I only get a message window
telling me that "the document is empty (0 kb)" and have to click OK to
proceed. The pdf-file is an ordinary one, created by CutePDF Professional
version 3.64.
One strange thing is that one pdf-file was opened correct once.
Hälsningar/Regards
Birger Johansson
Tel/phone: +46706701045

Still could not launch iTunes due to itunes library itl cannot be read because it was created by a newer version of itunes

Before I posted, I already tried the method from the posts below, btw my system is Windows 7
The file "iTunes Library.itl" cannot be read because it was created with a newer version of iTunes
Re: The file “iTunes library.itl” cannot be read because it was created by a newer version of iTunes.
Empty/corrupt iTunes library after upgrade/crash
Even I uninstalled iTunes 11 and installed iTunes 10.7, still shows due to itunes library itl cannot be read because it was created by a newer version of itunes.
It bothered me for whole week, I could not update my iPod, neither my iPhone and iPad, please help.

Hold down shift as you start iTunes and keep holding until prompted to choose or create a library. Click create. Make a new library at the root of a drive called iTunes Test, e.g. C:\iTunes Test or D:\iTunes Test. This should establish that iTunes itself is working. Where is your active library supposed to be?
For general advice if iTunes itself has a problem see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies. You should normally install the current version of iTunes.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

TS3694 I continue getting "the file itunes library.itl cannot be read because it was created by a newer version of itunes" with my Windows 7 operating system. There are no threads devoted to this problem. Any recommendations?

I keep on getting the following message:
the file itunes library.itl cannot be read because it was created by a newer version of itunes
This is occurring on a Toshiba laptop running Windows 7. It appears no one has ever encounted this problem using a Windows 7 system judging by the lack of threads devoted to discussing this issue. Is this the end of the road for my participation in the Apple world, or is there a possible fix for this problem?
I run iTunes on my computer, on my iPad 2, and on my iPhone 4S.
Sincerely,
Ralph W.

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Uninstalled Itunes because of issue, reinstalled with newest version, now it won't read my library. Error message "The itunes library.itl cannot be read because it was created by a newer version of itunes"

Error message when opening itunes...The itunes library.itl cannot be read because it was created in a newer version of itunes... how do i fix, it will not open with any of my ipod, ipad, iphone.

I don't know why this error occurs, unless you have attempted to downgrade iTunes.
This method should get you up and running again.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Ipad opening old versions even though deleted - can't view new versions!

I am designing and creating iBooks and need to show them to my editor to before they are finished - I export them, upload to drop box and she downloads them onto her iPad 3 Version 6.0.
When I make the necessary changes, i duplicate the file, rename it, and re upload to dropbox. ie 'Joe Blogs 2', that way I have many versions to refer back to if necessary, and i label each one on the cover to save confusion.
Since the new update for iBooks Author we have had some pretty big problems, I have edited, exported and uploaded the books as usual, my Editor has downloaded them onto her ipad, but every time we tap on the new title to open the book 'Joe Blogs 2' it opens an old version 'Joe Blogs 1', even if the old one is deleted from the ipad, also, even if we upload a completely different book it still opens 'Joe Blogs 1' I have changed the titles, and file names and it has made no difference. we are both using iBook latest update.
NOTE: All books were created from an original template created in iBooks Author version 1, from the 'Basic' template. I have been using this template because I don't know how to recreate it - the are no chapters it starts with 1 page then has sections so that it ends up with a table of contents which looks like this, which means that the 'chapter' (section) title can be tapped and go straight to the section, which is something I would lose if I started the books from scratch (which I obviously don't want to do)

Thank you for replying, and for the tips on templates, that makes a lot of sense - i have now created a template from the original book, and saved it as a template (I cannot make the template from scratch as I do not know how, as I explained, to make a contens page that functions like the one in the picture)
Unfortunately, this has not solved the other problem
Just to check we are on the same page (no pun intended) what I have been doing is this;
• To start a new book: opening 'contents page', a template i have created (and saved as a template, so I get it from the welcome screen on IBA 2, as opposed to opening an existing file and duplicating it.) use that template to create a new IBA file, ie 'Maslen and Mehra 1' which I save, export as 'version 1' when prompted on IBA v2. then I add this to drop box.
after my editor has downloaded and seen it, I make changes, then duplicate and save as ''Maslen and Mehra 2' to show to her again. then I make make changes, duplicate, save, make changes, duplicate, save... up until 'Maslen and Mehra Final Proof (9)'
since the new IBA update every time she tries to open a new file, the last one I sent her before the update opens (which is really old now as we have made a lot of changes, on our current book we are on version11 but version 3 opens!. Thinking that my template might be the problem I did the following:
• started from scratch: chose an bulit-in IBA template, put a 'A' on the cover, saved it as 'A', exported it, added it to drop box. my editor downloaded and opened it fine.
• changed the 'A' to a 'B' on the front cover (did not duplicate the file) exported it, I changed it to 'version 2' when prompted, saved the .Ibooks file as 'B' and uploaded it to drop box. My editor dowloaded it fine, and it appears in the library but When my editor opens it 'A' opens instead.
• Started again (with a completely different built in IBA template) repeated the process, new book 'A' again worked fine, but this did not change to 'version 2'. same problem. new book 'B' opened as new book 'A' again.
• Started again (again with a completely different built in IBA template) this time duplicated 'A', named it 'C', saved, exported 'C' and 'A' still opened even though 'A' is a different file!
• tried changing the meta-data file title, repeated the process, made no difference.
• tried different drop box account, didn't make a difference
• she tried restoring her ipad, still made no difference
• my editor cannot view IBA files (only .ibooks) so we cannot get around it that way...
so my current issues:
• My editor and I need to find a way we I can create a book, send her a copy and make changes, and send her a new copy, whether by duplicating it or even by re-exporting the original document (and saving a copy as a spare) - but neither currently work - why is this so difficult? this was not a problem before the update, she could have multiple books with similar filenames, all orginating from the same file. (which I now know is not the correct way, but even using templates has not made a difference)
• regarding templates: have I missed somewhere that you can make a template from scratch? I thought the closest you could get was to choose an existing template, delete everything then 'add section/chapter' if I go to 'New' in ibooks author then it still just takes me to the template page so I have no choice but to choose one of the IBA templates or one of the ones I have created myself, given the choice I would always rather start from scratch and a blank page anyway! :-)
Thankyou again

This was created on an older version and is unable to open.

I create a Keynote on my Macbook Pro using the latest version of Keynote.
I save it to Dropbox.
ON MY iPAD: I download the Keynote on Dropbox and then select 'Open In Keynote'. I then get the message that the Keynote cannot be opened due to it being created with an older version. However, ALL versions of Keynote are fully up to date!
Can anyone shed any light on this for me?

Are you sure it was created in the last version of Keynote ('09) and not an older version? I've had no problems with opening them on the iPad in the new Keynote version. I also used to Dropbox route.
I did have issues with some old documents which were created in (even) older versions of Keynote/Numbers. In that case i could solve it by opening them in Keynote/Number '09, save them and then open them in Keynote 6.

Trial version load file error: ... created with a newer version of Adobe After Effects

I downloaded and installed the trial version of Adobe After Effects 6.0 last night and worked on a project for quite some time. This morning, when I tried to open the project, it gave me: After Effects Error: this file was created with a newer version of After Effects [3.0 (unknown)] -- time to upgrade your application.
The message is annoying. This means that if anyone send me an After Effects File from future versions, I cannot load them. Even Microsoft has converters for backwards compatibility
It is costing me time to evaluate the product, and lowering my opinion of it since it obviously has bugs

Ah, I see. So you are using 6.0, not CS6? Yes, in that case things are just as they are - AE is not forward compatible. Only CS5.5 and CS6 allow to save one version back (that is CS5 and CS5.5, respectively), but beyond that AE never offered this feature. anyway, AE 6.0 is hopelessly outdated. It doesn't even work on contemporary operating systems nor does it work properly with current versions of Quicktime and just the same it doesn't support any modern media formats, so that's like trying to fly to the moon with a WW I. airplane... and to make matters worse - AE 6.0 was one of the most bug-ridden versions of the program in the first place.
Mylenium

Create iPad or AppleTV version bug...

Similar Messages

Maybe you are looking for