Create job and modify existing jobs in OM

Dear all
how to create job and modify existing jobs in OM?
thanks
Jeeva

[…] (as I understand it), pdf's are not a viable solution as these print jobs feature a very high resolution (1200 dpi).
I would expect the output from Finale to be mostly in the form of font characters—so a PDF you create by printing-to-file should be resolution-independent. If you have +Adobe Acrobat+, that can be verified quite easily in Document Properties, which will list all embedded fonts, but you should also be able to tell by zooming ’way in with Preview: if the score still looks sharp when greatly enlarged (and the file takes up less than a few hundred kilobytes per page), you can be sure it will print well on any suitable device. (If you print-to-file as PostScript instead of PDF, the resulting document can be downloaded directly into any PS printer, but it will likely be several times larger than a PDF version.)

Similar Messages

Can I add new job in the existing Job

Hi Gurus,
There is a job which loads data from 4 ODS to respective Infocubes. Now we are adding new infocube and new ODS to the existing layout so can we add 1 more job which loads data from that ODS to corresponding Infocube. If so how??? Can u give me detailed steps to add new job in the existing job...
Thanks in advance

is the previous loads done through a job or a process chains???
Go to RSPC > check what process chains are there and in case if you find one > log you will see when it was last run and stuff.
But if it is a job in SM37, it is a different story, u might have to create a variant of that job and create events to trigger the job in sequence depending on ur scenario..
give more details. like when is that job triggered, if any events used.

SM37 - Add a new step job to an existing Job

I have created step job in SM37, Is there any way to add a new step job to this existing job.?

Hi,
You can do thru SM37 itself only...
Selct job name>change mode>Step >create step..
this is the way you can add as many steps for that job..
Kuber

Created by and modified by for a item

when we create a list item we can change the created by and modified by like this :
item["Author"] = userValue ; //InternalName of "Created By" field is "Author"
item["Editor"]=userValue ;  //InternalName of "Modified By" field is "Editor"
but we we upload a file to document library, we will get two columns Document Created by and Document Modified by.
the type of these two columns are text .
my question is what these two columns do ?

You can add refiners to your search
http://blogs.technet.com/b/tothesharepoint/archive/2013/11/11/how-to-add-refiners-to-your-search-results-page-for-sharepoint-2013.aspx
http://technet.microsoft.com/en-us/library/jj219669%28v=office.15%29.aspx
Weith of ranking model to help on which page the document should be viewed
http://msdn.microsoft.com/en-us/library/office/dn169052%28v=office.15%29.aspx
<BM25Main name="ContentRank" k1="1">
<Layer1Weights>
<Weight>0.26236235707678</Weight>
</Layer1Weights>
<Properties>
<Property name="body" w="0.019391078235467" b="0.44402228898786156" propertyName="body" />
    <Property name="Title" w="0.36096989709360422" b="0.38179554361297785" propertyName="Title" />
    <Property name="Author" w="0.15808522836934547" b="0.13896219383271818" propertyName="Author" />
    <Property name="Filename" w="0.15115036355698144" b="0.96245017871125826" propertyName="Filename" />
    <Property name="QLogClickedText" w="0.3092664171701901" b="0.056446823262849853" propertyName="QLogClickedText" />
    <Property name="AnchorText" w="0.021768362296187508" b="0.74173561196103566" propertyName="AnchorText" />
    <Property name="SocialTag" w="0.10217215754116529" b="0.55968554315932328" propertyName="SocialTag" />
</Properties>
</BM25Main>http://technet.microsoft.com/en-us/library/dn169065%28v=office.15%29.aspxhttp://technet.microsoft.com/en-us/library/jj219669%28v=office.15%29.aspx
If this helped you resolve your issue, please mark it Answered

Sharepoint Site User name,created by and Modified field issue

I am being admin of sharepoint site . I have added a user to my sharepoint site from people and groups(Site Action-->Site Settings-->Users and Permissions-->People and Groups). So Now "Created by" and "Modified by" field should
show My login name(display name) in those fields Right ? But In those field it is showing user name whom I have added to my sharepoint site. I have added user to my site so My display name should be their in "created by" and "modified
by" field. Facing this issue on PROD and UAT.

Hi Rajshekhar,
Actually, the users have been added to the site groups or granted with permissions in Site Permissions, then the users will be added to the User Information List of the site collection.
I recommend to check if the users you added have already been listed in the User Information List.
If yes, then the Created By and Modified By fields have already been filled with other values.
Created By field will show the user name who is the first one to add the user to the site and the Modified By field will show the last one who edit the My Settings of that user.
To access the User Information List, you can type the URL like this:
http://server/_catalogs/users/detail.aspx.
Best regards,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to use create by and modified by

how to use create by and modified by ?
when some one create row it will stamp who create
and when some one edite row it will stamp who edit row
i ever user create on and modified on
but creay by and modified by i never use it.

Howard,
If you are not using JAZN you can still register created by and modified by user and date info in a "backdoor-wise" way:
1. Get the user login string by using System.getProperty("user.name")
2. Get the current datetime using java.util.Date
3. In the backing bean for the page and the action method for your submit button, set the values for the components containing the created by or updated by values to the values obtained in points 1 and 2.
Hope this is somehow useful,
AG

Creating a job and scheduling a job error in OEM

Hi, Everyone,
I am trying to create and schedule a job thru OEM. In the the pl/sql block provide i have given my code like this
begin
SET SERVEROUTPUT ON;
SPOOL C:\RFV_PROFILE_REPORT.LOG APPEND;
SELECT TO_CHAR(SYSDATE, 'DD/MM/YY HH24:MI:SS') FROM DUAL;
EXEC PAC_RFV_PROFILE_REPORT.CALL_ALL (200910);
SELECT TO_CHAR(SYSDATE, 'DD/MM/YY HH24:MI:SS') FROM DUAL;
SPOOL OFF;
end;
i have created the job and scheduled it but i am getting this error:
Error # 6550
Details ORA-06550: line 2, column 5: PL/SQL: ORA-00922: missing or invalid option ORA-06550: line 2, column 1: PL/SQL: SQL Statement ignored ORA-06550: line 3, column 7: PLS-00103: Encountered the symbol "C" when expecting one of the following: := . ( @ % ;
could anyone pls help as this is very urgent.
Thanks in advance

Ah, the problem is you are confusing SQLPlus commands with PL/SQL.
SET SERVEROUTPUT ON; -- This is a SQLPlus command, not necessary here.
SPOOL C:\RFV_PROFILE_REPORT.LOG APPEND; -- This is a SQLPlus command, in PL/SQL to write out to a file you will need to call the UTL_FILE package to open a file for writing to. Except that the file you write to will appear on the database server, not your workstation, when the scheduled job runs.
SELECT TO_CHAR(SYSDATE, 'DD/MM/YY HH24:MI:SS') FROM DUAL; -- In PL/SQL you need to SELECT columns INTO variables FROM tables. But in fact I guess you want to write the time to file using UTL_FILE again. However, you don't really need to do this, since scheduler will log the start time and run duration itself.
EXEC PAC_RFV_PROFILE_REPORT.CALL_ALL (200910); -- This is the SQLPlus equivalent of the PL/SQL command:
BEGIN
PAC_RFV_PROFILE_REPORT.CALL_ALL (200910);
END;
SPOOL OFF; -- This is a SQLPlus command, not necessary here.
So to summarise, all you really need is:
BEGIN
PAC_RFV_PROFILE_REPORT.CALL_ALL (200910);
END;
And the scheduled job will log the start time and duration in the database, which you can find here:
SELECT * FROM USER_SCHEDULER_JOB_RUN_DETAILS

How to get the user created at and modified at properties for a site collection using powershell

Hi guys, I Know how to get the list of users of a site collection by Get-SPUser cmdlet but hte problem is that this cmdlet doesnt give me the user Created at and modifed at properties
can any one tell me how to get these values via powershell????
ps: ignore the 2013 screenshot.. i just want a way to get those values .. if you provide me solution in either 2010 or 2013 , i will crack the other..
plz guys help me ...

Get the User Information list and then get the user from that list
$web = Get-SPWeb "siteUrl"
$userInfoList = $web.SiteUserInfoList
$userItem = $userInfoList.Items[0]; #0 here is just for demonstration. You take the user you want here or loop through all users.
$created = $userItem["Created"]
$modified = $userItem["Modified"]

Remotely invoke DS job and wait for job

Hi,
We are running DS 4 SP2 on Linux and have generated our job script from
the console. We need to be able to invoke a DS job from scheduler
(autosys) running on AIX and wait for the DS job to complete so the
return status is passed back to autosys.
We are planning to replace informatica with DS, informatica has a utility
pmcmd which allows remote invocation and will also wait for the job to
complete. Is there a similar utility in DS?
Alternately, if we installed DS on the remote AIX server, would it be
able to remotely start/wait for the job on the Linux server?
Thanks,

you can export the job execution command for a job from management console and use that to run the job from auto sys, the script will start job aluncher which has a option -w (by default it waits for job to complete) which tell whether the launcher process waits for job to complete or starts the job and exit

Can report program trigger a job and then a job trigger another report?

Actually I'd like one ABAP4 report program trigger another ABAP4 report program and yesterday some people here suggested me to use SUBMIT statement at the end of the source program, but if we don't want to touch the source code of the source program, what would be the best way to trigger another report program, in this way: report program1 -> job -> report program2?
or report program1 -> event -> job -> report program2?
Thanks

Hi Kevin,
I know this is a late reply and you probably already solved your problem. However, the new Job Scheduling capabilities of SAP NetWeaver might be something to look at. You can find more information about this on SAP Service Marketplace under quick-link job-scheduling (http://service.sap.com/job-scheduling)
Kind regards,
Edwin Esser

How to delete,create, add and modify a item or a file

hi all,
could u all pls provide mi with the source code for that?
i have seen various functions on the web yet i dunno what is the correct functions to use pls kindly reply to me asap

Hope this will help u.
http://forums.java.sun.com/thread.jsp?forum=31&thread=142975

Created By field and Modified By field and People Picker field values are hidden to other Users

Hi,
We have a strange permission issue in one of the MOSS-2007 server farm. The users are not able to see each other name in "created by" and "modified by" column value in lists and libraries. For example if "User A" create an item in a list then if "User B" opens that item then he cannot see "created by" and "modified by" column value and vice-versa. But they can see their name in "created by" and "modified by" column but not others. Both the users has contribute access to that list, so both can edit each other data but cannot see each other name.
This become a bigger issue, if any of tje list has people picker column, then thay cannot see that column value(if that column value does not his/her own name). This means this column value will be always empty for "user A" when that peopel picker value is anything other than "User A". This happens for all the lists and libraries.
Even "User A" and "User B" are owner of that site, it behaves the same. But site collection administrator can see "created by" and "modified by" for all items for all the users.
It seems very strange for me. any help on this will be appreciated.
Thanks in advance,
Sanban

Hi,
You can try to create a new standard view, then select “created by” and “modified by” column under columns, next apply this view, finally check the effect.
Did you customize the permissions of the list or document library? Did you customize the permission of the item? For example, break the permission inheritance form its parents. If so, try to inherit permission from its parents, after that create a new standard view according to the steps above, then check the effect.
By default, permissions on lists, libraries, folders, items, and documents are inherited from the parent site. However, you can break this inheritance for any securable object at a lower level in the hierarchy by editing the permissions on that securable object (that is, creating a unique permission assignment) . For example, you can edit the permissions for a document library, which breaks the permissions inheritance from the site.
You can also try to create a new document library, then create a new document with user A, after that log into with user B, check the effect.
For more information about SharePoint : page level permissions, please refer to the following article:
SharePoint : page level permissions
http://blogs.msdn.com/brettrobinson/archive/2009/04/24/sharepoint-page-level-permissions.aspx
For more information about control access to sites, please look into the following articles:
About controlling access to sites and site content
http://office.microsoft.com/en-us/sharepointtechnology/HA101001441033.aspx
Permission levels and permissions
http://office.microsoft.com/en-us/sharepointtechnology/HA101001491033.aspx
For more information about how to create a view, please refer to the following article:
Create or change a view
http://office.microsoft.com/en-us/help/HA100215771033.aspx
Hope this helps.
Rock Wang
Rock Wang– MSFT

How to get record created and modified user name from SharePoint Database?

Hi,
My SharePoint Portal is in Window Authentication. Some users have added requests to Lists. I want to find user name of the Created By and Modified By.
Only ID is available in the corresponding columns in Content Database table. In which table the users details would store in Content Database.
Thanks & Regards
Poomani Sankaran

hi, you can find the user details inside UserInfo Table in content database. But i would suggest not to directly query the content databse not even for select as it will affect the indexes.
why not follow the link
http://www.sharepoint4arabs.com/AymanElHattab/Lists/Posts/Post.aspx?ID=99
also if you just need the basic created by and modified by info than use SharePoint Object Model To get these values using ECMA script use below link
http://www.c-sharpcorner.com/UploadFile/anavijai/get-created-by-and-modified-by-values-from-sharepoint-2010-l/ using Client side object model https://msdn.microsoft.com/en-us/library/office/ee534956%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
Using server Side Object model
http://www.sharepointcto.com/View.aspx?id=15
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

How to find the job and job status from RSPCM

hi all,
suppose we got an error and in rspcm the process was failed.i want to know the status of that particular job.and if any i want to stop that job in SM37.
plz tell me how to find the job and job ststus from RSPCM...and how to stop that job in SM37
thanks,
jack

Hi Jack,
RSPCM: T.Code
This transaction is used to monitor the process chains
First:
here you need to add the process chains into the sheet
Second:
Then you can monitor the process chains in this transaction code
Like you can see the : status ,proces chain ,Last run date ,Last run time ,Log ID
Status : Green when sucessful,Yellow when running & Red when you get errors
Now when yoy click on any of the process chain in RSPCM you will go to the LOG VIEW as you see in RSPC transaction
SM37:T.code
This transaction is used for Job Overview
you can see many options in SM37
like Released,active,cancelled,finished,etc
Just select the ACTIVE jobs and also pass STAR in JOB ID & USER ID
here you can only see the active jobs
Goto Step in toolbar
select the program displayed
then chose option GOTO - Variant in main menu bar
in the variant you can see the job belong to which Process chain
if you want to cancel this job come back to SM37 Display screen
Select the Job and select the JOB DETAILS tab in Tool Bar
Collect the WIP ( Work Permit ID)
Go to SM50 T.code and find the WIP
in Main Menu Bar you find the option Cancel with Core choose this it will cancel the Job
Regards
Hari

Problem in modifying existing records in dbtab

Hi Experts,
I am doing a report where I have created two dbtab's , one for data getting saved and
other for fetching data and modifying exsiting records..
For eg - let ZABC be the table where I need to insert or update records and ZXYZ is the table where
I need to fetch and modify existing records.
Now my probelm is :
In case of inserting new records (multiple records ) into my dbtab ( ZABC ) its working ,
but modifying existing records in another dbtab (ZXYZ ) its not wroking !! plz advice !!
If my select querry for modifying exsiting records is:
SELECT * FROM ZXYZ INTO TABLE ITAB WHERE MATNR EQ S_MATNR.
*****then its inserting a newline along with the existing records.
but when my querry is,
SELECT single * FROM ZXYZ WHERE MATNR EQ S_MATNR.
then its modifying the existing records, but only the first record.
Loop at itab.
if sy-tabix = 1.
zabc-matnr = matnr.
zabc-idnrk = idnrk.
zabc-budat = s_budat.
zabc-menge = menge1.
ZXYZ-menge = ZABC-Menge + MENGE1.
ZXYZ-BALC = ZXYZ-Menge   -   MENGE1.
ELSEIF sy-tabix = 2.
zabc-matnr = matnr.
zabc-idnrk = idnrk.
zabc-budat = s_budat.
zabc-menge = menge2.
ZXYZ-menge = ZABC-Menge + MENGE2.
ZXYZ-BALC = ZXYZ-Menge - MENGE2.
ELSEIF sy-tabix = 3.
zabc-matnr = matnr.
zabc-idnrk = idnrk.
zabc-budat = s_budat.
zabc-menge = menge3.
ZXYZ-menge = ZABC-Menge + MENGE3.
ZXYZ-BALC = ZXYZ-Menge   - MENGE3.
ENDIF.
INSERT ZABC.
IF SY-SUBRC EQ 0.
MODIFY ZXYZ.
        IF SY-SUBRC = 0.
          MESSAGE : I002 WITH 'RECORD CREATED'.
            ENDIF.
ENDIF.
Please advice
Karthik
Edited by: Karthik R on Aug 24, 2009 9:42 PM

Hi,
This is because in the second case you are not selecting records into an internal table.
As a result only the first record which satisfies the where condition is fetched.
Check if the program goes into the loop when you write second select query.
KR Jaideep,

Create job and modify existing jobs in OM

Similar Messages

Maybe you are looking for