Create Keywords at highest hierarchical level in Lightroom 5
I cannot seem to create a new keyword in LR5 at the highest hierarchical level. When I try to create a new keyword, either with an image selected or not, it puts that new keyword in as a (third-level) sublevel keyword within a keyword that I have created in the past. I can move the newly created (sublevel) keyword to be a sublevel keyword within another previously created highest level keyword. But I cannot create a new highest level keyword.
This does not seem to make sense to me. Can anyone help?
Right-click on any keyword and you'll see some options, one of which is "Put New Keywords Inside this Keyword", which if selected means that any new keywords get listed under that keyword's hierarchy, rather than at the top level. Once this option is selected, the "target" keyword is denoted by a small dot after its name, see the attached screenshot. If that's what's happened, simple right-click again on that target keyword and uncheck that option.
Similar Messages
-
How to create a dimension with one level
I created a cube with some dimensions, that have only a level, and this kind of dimensions bring me some problems when I want to use "OracleBI Spreadsheet Add-In" to consult the cube.
The problem is that I canât create a hierarchy with only a level, so the dimensions are created without a hierarchy.
When I make a query in the âQuery Builderâ of "OracleBI Spreadsheet Add-In", I have some problems in the step of choosing what levels I want to select for a determined dimension, if that dimension is a dimension without a hierarchy.
What really happens is that, I can see all the values for the level in the left box, but I donât achieve to put one of these values on the right box. I can click in the next button, to jump to the next dimension, and all the process of selection for the other dimensions occurs without problems, except for the dimensions that havenât a hierarchy.
If I select only dimensions that have a hierarchy, all works perfectly, but if I select one or more dimensions that donât have a hierarchy, the following problems occur:
=> I canât select the values of the level that I want to see (only for dimensions that donât have a hierarchy)
=> When I click in âendâ button of the âQuery Builderâ, it doesnât finish and blocks.
The solution is to create a hierarchy, but I canât create a hierarchy with only a level. Is it possible to create a âtop levelâ without a source column in the dimension table? So I will have two levels, and with these two levels I can create a hierarchy that resolves the problem.
What is the solution for this problem?
Regards,
Rui TorresHow I can resolve my problem?
I donât want to use the CWM2 PL/SQL packages, because with these packages I only can create MOLAP cubes.
I only want to create ROLAP cubes, but I can't create a hierarchy with one level.
Why the "OracleBI Spreadsheet Add-In" doesnât work with dimensions, that not have hierarchies?
How I can resolve this BIG problem?
It is very URGENT!!!!
Regards,
Rui Torres -
Hi,
in my report i need to display hierarchie levels 4 & 7 only.
I was selected my Hierarchy >>right click>> restrict>>
My hierarchy like this
SAP
+ SAP Labs
+ SAP Group
+ SAP Divisions
+ Regeions
+ SAP GDC
+ SAP Group
+ SAP Divisions
+ Regeions
+ SAP Group
+SAP Group
+ SAP Divisions
+ Regeions
in above scenario how can i restrict my heirarchie for 4 & 7 levels.
Plz help me out of this issue.
Thanks in Advance
Regards
AravindaDear Aravinda,
You can restrict the values in query level itself or otherwise if u want to populate values for this hierarchy field , create one variable and write a user exit and populate the values it will show the report based on the populated values.
Hope it will work!!
Please assign points or reply with ur requirement again.
Best Regards,
SG -
I am on Oracle 11.1.1.7 BPM suite on W8 64 bit. I can't launch the flow trace and get the error "Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off". I have set the audit level to development at the soa-infra>SOA Administration> Common Properties > Audit level set to development and Capture Composite Instance State is Checked.
Can somebody advice.
ThanksCan you please confirm me the following steps...
Log in to the EM console, Expand soa-infra (soa_server1) , go to the partition where your composite is been deployed, Click on your composite, On the right, click on the dropdown Settings and choose Composite Audit Level. you can choose to set the Audit Level for this composite. If you choose Inherit, it will take the settings to what the server is being set to. Otherwise, we can override it by choosing Off, Production, or Development.
Make sure your setting for that composite is not Off, keep inherit or production or development.
Thanks,
N -
ORA-20100: AppDomain could not be created for the specified security level
We recently updated our development environment to Visual Studio 2010. We have previously deployed (with success) .Net stored procedures from Visual Studio 2005 to our Oracle 10gR2 database. I am currently trying to configure a local instance (called local) of Oracle 10gR2 database to test deployment of .Net stored procedures to Oracle 10gR2 via Visual studio 2010 and ODT version 11.2.0.1.2. I have built the demo from the ode developer guide and gotten as far as deploying it but executing the stored procedures from VS 2010 or SQL*Plus produces the following error...
ORA-20100: AppDomain could not be created for the specified security level
ORA-06512: at "SYS.DBMS_CLR", line 152
ORA-06512: at "SCOTT.GETDEPTNO", line 7
Here is what I have done.
(Server)
1. Installed oracle 10gR2 with ODE.Net
2. Installed Oracle 10gR2 patch set 22
3. Installed ODE upgrade from Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21
(Client)
4. Installed Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21 (In new client home).
5. Installed patch set 22 on 10g client home.
6. Installed Oracle 11g Release 2 ODAC 11.2.0.1.2 with Oracle Developer Tools for Visual Studio(in new 11g client home, only for VS 2010)
I have made some minor changes (GAC) etc. per the following threads...
ODE.NET 11.1.0.7.20 on 10g Database?!
Re: Error: System.TypeInitializationException
The database appears to be fully functional via TOAD - SQL plus etc. I can't find much on this error but it appears Oracle needs some permissions to launch an ASP.Net application that it does not have. Any help would be GREATLY appreciated, don't hesitate to ask for additional details.The KB article is almost what we have apart from theitalic underlined
part
Consider the following scenario:
You use a domain administrator account to log on to a computer that is running Windows 7 or Windows Server 2008 R2.
You use the Active Directory Users and Computers Microsoft Management Console (MMC) snap-in to connect to a domain controller.
You open the Properties dialog box of a user account.
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
You set the Remote Desktop Services Home Folderattribute to the shared folder path.
NoteThis attribute is located on the
Remote Desktop Services Profiletab.
You click Apply or OK.
In this scenario, you receive the following error message:
The home folder could not be created because: The network name cannot be found.
Note If you click Apply or OK again, no error message is returned. However, the setting is not saved.
I think the important bit is
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
We manually create the shares on our NAS and then just want to enter the path in the profile tab, I suppose the question is how to we stop it trying to create the shares ? -
Best practice to create multi tier (atleast 3 level) table
What is the best practice to create multi tier (minimum 3 levels) of table?. Could any one provide a sample structure?.
Thanks.Can u b more specific as to what you are trying to do. What u mean by 3 level table?
-
How To Use Dynamic Menus To Place Manually Created Jspx Pages On Sub-Level
JHeadstarters,
Back on the JHS trail and could use some help.
I started using dynamic menus (see section 9.2 JHS Dev Guide) to setup a custom menu structure and found it could not be easier however I need to solve 2 issues;
1. How to get more than 2 levels deep on the menus (parent, child, grand-child, etc.)? In the menu structure setup I have created a menu that is 3-levels deep however when it runs you only get 2 levels. Perhaps a template needs to be changed.
2. How can I assign manually created jspx pages to sub-level menus?
Scenerio;
I have JHS generated pages *** AND *** manually created pages. Using dynamic menus to place the JHS genned pages works fine, the problem is how to do it with manually created pages.
Using Dynamic Menu's I created a top-level menu tab named "warp-core", below it on the next level I have two sub-menus, one named "search" and one named "form" for displaying the results of the search and modifying the rows (don't ask me why they are seperate).
The problem is how to assign the manually created jspx pages to those sub-menus? Or am I going abouth this the wrong way? Perhaps I could use JHS to generate seperate search and display pages.
Thanks!
BG...Bill,
1. Yes, you need to decide yourself how and where you want to render this third level menu. You then create a region file similar to dynamicMenu2Tabs.jspx, just replace the references to level2MenuItems with level3MenuItems. Then create a custom template to call this menu 3 region file.
For example, you could create a bulleted vertical list for level 3 as illustrated in section 9.1.3 of the Developers Guide (that example is with static menu, but you can use similar technique for dynamic menu)
2. Instead of a group name, you can specify a JSF Navigation action in the menu administration application. So, you create a global navigation case to your custom page, and you enter this navigation case id in the menu admin app.
Note that if you want to generate separate search pages, you can do so by setting the advanced search property to "separatePage".
Steven Davelaar,
JHeadstart Team. -
Highest dunning level becoms lower
Hi masters
i have a issue for greece customers
customer has 10 open line items
one item is due from 2007 it should be the 4th level dunning level remaining 9 items over due items for this year , as per very old due item in customer master should be the 4 level .
up to last run customer master has 4 level , but recent run updated 1 st level in master
for 2007 open item also has 1 st level in dunning list and remaining 9 items also got 1st level in dunning list
why the 4 level changed to 1 level for 2007 item
why all open items got 1 st level in dunning list
please suggest it is priority issue
i will give more points for good and fast reply- possible causes
In the Customizing settings for dunning (company code data), 'Dunn. by dunning level' is selected and for the output of the dunning notices, sorting in descending order according to dunning level is set (Sort field -> Dunning notice header).
Or:
The highest dunning level of the dunning notice was changed by correcting the dunning levels of the items after the dunning run.
Or:
In the customer/vendor master record, a key is specified for dunning grouping.
Rgds. -
Permission to create keywords?
Permission to create keywords?
Hi. We're currently on 2006.0.6. I'm trying to give a user access to create and manage keywords without giving them complete administrative access to RC. I tried adding the user to the group "Manage and organize portal categories and keywords". They can now browse and update existing keywords, but the option to create a new keyword isn't available for them. Is there a way to let a user create new keywords without giving them complete admin access to RC?Tylor,
Yes - you can accomplish this in RC06 by also giving this person the "Change Site Parameters" site permission. This, along with the "Access ServiceDesigner" and "Manage and organize portal categories and keywords" site permissions will allow them to create keywords. Because you are not giving them access to ServiceCommunity, the "Change Site Parameters" site permission is limited only to actions taken with ServiceDesigner. -
How to create infopackages for an Hierarchy (# Levels)+ transport
Hi experts,
i have create an Hierarchy with differents levels which i will like to load from R/3 to BI using a batch job and a process chain.
I would like after that creation to transport it in the Test system.
Could you please help me on that way?
Cheers
GiloHi That means,
the hierarchy should be built in Test and in productiv system?
We dont have authorization ito do any change neither in Test nor in productiv system.
How to proceed?
Thanky
Gilo -
Replication of hierarchical levels labels from ECC to SRM
Hi Gurus!
I am working on SRM 5.0 in Classic scenario and ECC 6.
We are trying to replicate data from ECC to SRM in order to retrieve the same organisational structure as the one existing in ECC in SRM.
We succeed in replicating hierarchical levels from ECC to SRM, indeed we retrieve data of infotype 0001 employee subgroup in table HRP5581-PERSK. But we did not retrieve labels of those subgroups?
Have we missed to customize a filter in tx BD64 in ECC? Or the problem is just that data replication does not send hierarchical levels labels from ECC to SRM?
Please help!!
Thanks a lot.
Regards,
Morgane ChevallierHello all!!
Any idea on the subject??
Please help!
Regards,
morgane -
Mapping to 3rd hierarchical level in IDoc
Hi, well i have a little problem.
Scenario: File to IDoc
i get this kind of file:
<i>P|67220400|9991233643|
W|71123456|1|4|BPL
K|70100005|15|X|9999
K|70100200|4||1200
K|70100210|3||300
W|71123456|1|4|ABM
K|70100005|15|X|9999
K|70100200|4||1200
K|70100210|3||300</i>
...where P, W, K are keyfields.
The IDoc has three hierarchical levels, whereas P is first, W second and K third.
All these values should be mapped in one IDoc. But everytime a new W occurs there is a new recordset generated, so a new IDoc.
Nevertheless i map as follows:
<i>/ZIDOC/IDOC =/MT_EPLAN/ EPLANRecordSet=
/ZIDOC/IDOC/@BEGIN =const([value=])
/ZIDOC/IDOC/EDI_DC40/@SEGMENT =const([value=])
/ZIDOC/IDOC/EDI_DC40/TABNAM =const([value=])
/ZIDOC/IDOC/EDI_DC40/DIRECT =const([value=])
/ZIDOC/IDOC/EDI_DC40/IDOCTYP =const([value=])
/ZIDOC/IDOC/EDI_DC40/MESTYP =const([value=])
/ZIDOC/IDOC/EDI_DC40/SNDPOR =const([value=])
/ZIDOC/IDOC/EDI_DC40/SNDPRT =const([value=LS])
/ZIDOC/IDOC/EDI_DC40/SNDPRN =const([value=COS])
/ZIDOC/IDOC/EDI_DC40/RCVPOR =const([value=])
/ZIDOC/IDOC/EDI_DC40/RCVPRN =const([value=])
/ZIDOC/IDOC/ ZBC15_EPLAN= /MT_EPLAN/EPLANRecordSet/EPLANHead =
/ZIDOC/IDOC/ZBC15_EPLAN/ @SEGMENT=const([value=])
/ZIDOC/IDOC/ZBC15_EPLAN/EPLAN =/MT_EPLAN/EPLANRecordSet/EPLANHead/ Data1=
/ZIDOC/IDOC/ZBC15_EPLAN/ WERKSTUECK= /MT_EPLAN/EPLANRecordSet/EPLANHead/Data2 =
/ZIDOC/IDOC/ZBC15_EPLAN/ ZBC15_WERK= /MT_EPLAN/EPLANRecordSet/EPLANWerkz =
/ZIDOC/IDOC/ZBC15_EPLAN/ZBC15_WERK/ @SEGMENT=const([value=])
/ZIDOC/IDOC/ZBC15_EPLAN/ZBC15_WERK/ WERKSTUECK= /MT_EPLAN/EPLANRecordSet/EPLANWerkz/Data1 =
/ZIDOC/IDOC/ZBC15_EPLAN/ZBC15_WERK/ POSNR= /MT_EPLAN/EPLANRecordSet/EPLANWerkz/Data2 =
/ZIDOC/IDOC/ZBC15_EPLAN/ZBC15_WERK/ ANZAHL= /MT_EPLAN/EPLANRecordSet/EPLANWerkz/Data3 =
/ZIDOC/IDOC/ZBC15_EPLAN/ZBC15_WERK/ KTEXT= /MT_EPLAN/EPLANRecordSet/EPLANWerkz/Data4 =
/ZIDOC/IDOC/ZBC15_EPLAN/ZBC15_WERK/ ZBC15_KOMP= /MT_EPLAN/EPLANRecordSet/EPLANKomp =
/ZIDOC/IDOC/ZBC15_EPLAN/ZBC15_WERK/ZBC15_KOMP/ @SEGMENT=const([value=])
/ZIDOC/IDOC/ZBC15_EPLAN/ZBC15_WERK/ZBC15_KOMP/ KOMP= /MT_EPLAN/EPLANRecordSet/EPLANKomp/Data1 =
/ZIDOC/IDOC/ZBC15_EPLAN/ZBC15_WERK/ZBC15_KOMP/ ANZAHL= /MT_EPLAN/EPLANRecordSet/EPLANKomp/Data2 =
/ZIDOC/IDOC/ZBC15_EPLAN/ZBC15_WERK/ZBC15_KOMP/ ART= /MT_EPLAN/EPLANRecordSet/EPLANKomp/Data3 =
/ZIDOC/IDOC/ZBC15_EPLAN/ZBC15_WERK/ZBC15_KOMP/ MENGE= /MT_EPLAN/EPLANRecordSet/EPLANKomp/Data4 =
</i>
Can someone help me?!
brHi Carsten,
As per my understanding of u r requirement check the maping for IDOC field in the strucutre.you have mapped with MT_EPLAN/ EPLANRecordSet.Once check the occurence of this.
Cheers
Veera
>>>Reward Points,If it is needful. -
Keyword Exchange between Bridge CS2 and Lightroom
Hello,
I was was using bridge CS2 to sort my pics with keywords and EXIF and now switched to lightroom. When I imported the pics everything was OK, data were taken over. When I now use bridge to add new keywords they are not recognized in lightroom and vice versa. Since I want to use both programs in the future how can I "synchronize" data like keywords or EXIF ...
I would be VERY glad if someone could help!!
Kind regards from Germany
StephanYes, but as far as I understand this feature exports/imports all your keywords in a list but not the assingments you made to a photo. For example if I have a photo in bridge with people whose names were newly assigned as keywords. Now I open LR but nothing has changed to the keywords of that picture. So what can I do to synchronize the keywords of the pics (newly assigned/added keywords in bridge to LR or vice versa)?
-
Can you create or fake a Hierarchical Lists in Forms?
I am interested in creating something like this on a form.
Any general help in creating or faking a Hierarchical list in Acrobat forms would greatly be appreciated.
ThanksYou can also create a hierarchical list very similar to that with a custom dialog that you can create via JavaScript, but this and the pop-up menu Gilad mentioned don't get displayed on a page, but only transiently in popups. Such things are usually triggered by the user pressing a button or something similar. Both the app.popUpMenu and app.popUpMenuEx methods and information about custom dialogs are in the Acrobat JavaScript reference that's included in the free Acrobat SDK. Also online here: http://help.adobe.com/livedocs/acrobat_sdk/11/Acrobat11_HTMLHelp/wwhelp/wwhimpl/js/html/ww help.htm?href=Introduction_Hel…
-
Highest dunning level on customer master
Hello All,
I am facing an issue where the customer is having the highest dunning level 9 on the overdue item.
Then the customer makes payment for all open invoices but the dunning level on the customer master remains 9. Because the dunning level is the highest, all sales orders are blocked and need to be released manually.
Is there any standard SAP program to update the customer master dunning level if the customer has paid off all overdue item and is having a account balance zero or credit.
Thanks very much for any help in advance.
Points will be assigned to any helpful answer.
Anish MathewHi,
There is no standard program to update the dunning level back to zero in case of payment.
You need to update the customer master via XD99, if needed in mass change. Otherwise use FD02.
Regards,
Gaurav
Maybe you are looking for
-
Iphone glitchy after repair. Need help Please.
So I cracked my screen at the gym over two months ago. WEIGHT fell on it, yeah pretty %^## dumb. Saw it was 269.00 for repair, I was afraid. My friend said he would do the repair for 120 with a year warranty, still to expensive. I started watching DI
-
Errors when using sql loader direct path with a nvl functin on a date field
I thought I read in 10g that all sql functions now work in direct path mode. the following function works without direct path mode. When we turn direct path mode on the load fails. When we take the function out in direct path mode it works. mydate DA
-
Using bind variables in a portal report
I'm using a portal 3.0.9 report with bind variables. I also use LOV to let the user choose his own parameters for these variables. When user click Apply on the customization form of the report, the selection is always "set to default"
-
How to handle 6 X 16 matrix in smartform
Hello Experts, I've a requirement where on TEXT FIELD I need to display 16 X 16 values. For example here is my matrix Header 1 Header 2 Header 3 Header 4 Header 5 Header 6 Header 7 Header 8 Header 9 Header 10 Header 11 Header 12 Header 13 Header 14 H
-
Im trying to update and republish to my host site through iweb. i keeps telling me my password is wrong. ITS NOT WRONG.??? Can anyone help