Create Limited user role on SCVMM 2012

Hi ,
Hi ,
I want to create user Role do the following actions only
Start / Stop VM
Delete VM
Create VM
Do you have any idea ?
Ramy

Hi Ramy,
Please try to post this question in  forum below , you  may get further assistance from SCVMM experts :
https://social.technet.microsoft.com/Forums/en-US/home?forum=virtualmachinemanager&filter=alltypes&sort=lastpostdesc
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • How to create/get user & role in Weblogic 9.2 programmatically?

    Hi,
    I am new to Weblogic 9.
    I need to create a web service to manage user/role in WebLogic 9.
    Searching thru the web and found some classes like:
    AtnSecurityMgmtHelper, AtnProviderDescription etc
    Are those the correct classes to create/retrieve user & role?
    If so, what jar file contains those classes and where is the jar
    file?
    Thanks in advance,
    Terry

    You can do it with WLST help
    http://e-docs.bea.com/wls/docs92/config_scripting/config_WLS.html#wp1019913
    or via JMX through http://e-docs.bea.com/wls/docs92/javadocs/weblogic/management/security/authentication/UserEditorMBean.html and such

  • I can't find failover cluster management after creating hyper-v cluster on SCVMM 2012 R2

    I've created a hyper-v cluster on scvmm 2012 r2 but I can't find the failover cluster manager to move storage resources. all hosts are showing to have hyperv role and failover clustering feature installed. disk Witness in Quorum is good, same as for the
    other CSV lun. Please help me Microsoft. Thank you. 

    The management consoles are not getting installed while building the cluster through SCVMM. However, its not mandatory to have the management tools on the server. You can have it on a different machine with this management tools installed and connect to
    this cluster remotely.
    Optimism is the faith that leads to achievement. Nothing can be done without hope and confidence.
    InsideVirtualization.com

  • How to create automatically users&roles in CUA and in chlid systems?

    Hi,
    i have a CUA on a 2 chlid R/3 systems (test and training) and 2 portal systems (test and training).
    i need to create a web application to create automatically users test and users training in CUA and see them in the R/3 chlid systems and at the same time to create autmatically a roles in CUA and R/3 chlid systems for those users (we sppose that the role is already stored in a table).
    are there any standard BAPI or Funcion modules that can do this job?
    is the role created automatically in CUA can be seen automaticall in the portal child system?
    any help?
    Thanks&Best regards

    You can use one of the various ways Java EE provides you, e.g. container managed authentication.
    It's also all in the Java EE tutorial: [http://java.sun.com/javaee/5/docs/tutorial/doc/bncas.html].
    You can configure it in the application server as well: [http://tomcat.apache.org/tomcat-6.0-doc/realm-howto.html].
    Here is an example how to use it in JSF: [http://ocpsoft.com/java/acegi-spring-security-jsf-login-page/].

  • How to create automatically users&roles in CUA and child systems

    Hi,
    i have a CUA on a 2 chlid R/3 systems (test and training) and 2 portal systems (test and training).
    i need to create a web application to create automatically users test and users training in CUA and see them in the R/3 chlid systems and at the same time to create autmatically a roles in CUA and R/3 chlid systems for those users (we sppose that the role is already stored in a table).
    are there any standard BAPI or Funcion modules that can do this job?
    is the role created automatically in CUA can be seen automaticall in the portal child system?
    any help?
    Thanks&Best regards

    Thank you all. I got the solution.
    Regards
    Rajesh

  • How to create Custom User Role in HelpDesk?

    Unfortunately, it is not possible to create a custom user role with custom permissions.  What you see is what you get!
    When you say, 'access to the Spiceworks server', do you mean Remote Desktop?  Or accessing Spiceworks application from another computer?

    Hi,
    Could anyone help me to create my custom User Role or edit the existing Role in HelpDesk system? Please help me for this problem.
    One more, How could my Helpdesk Admin/Tech user access to the Spiceworks's server. I mean, could he access through web browser or need to install it on client's PC?
    Stay tune,
    This topic first appeared in the Spiceworks Community

  • 5.0 created ISA user roles won't save in ISA user admin URL

    We just upgraded from 4.0 to 5.0, in config I assigned these roles & we can see them in the ISA user admin URL.
    SAP_CRM_ECO_ISA_WU_B2B_FULL
    SAP_CRM_INTERNET_CUSTOMER
    We can select them and assign to the box on the right and save, but when we go in they are on the left in the non assigned box.  Why won't they save?????
    The Z roles from 4.0 can be saved but they can't run ISA application as they don't have all the components.
    will give points.

    answer was security was not correct

  • How to create SR Queue and Custom User Role for technician only see which SR assigned Him/Her and Resolve

    Hi 
    I have created workitem SR advance and Criteria with ID [Assigned To ME] and created user role in Advance operators.
    But in technician Console showing which SR he/she created not service desk assigned to him/her.
    Please suggest...
    Regards
    Sheetla Maurya

    I have find out Solution .......Create Queue with Service Request Advance and we not need to create any criteria option, After that create custom User role on Advance
    operators with View "Assigned To ME"
    Regards
    Sheetla Maurya

  • Query Result Filtered using User Roles SCSM 2012 R2 RU2

    Hi,
    I have a Query Result setup in a Request Offering that shows the list of Printers using the Printer CI. We have different sites with printers that start with the site location like MTL. There are no filters in the Query Result. What i did is create a Group
    for each site that has the rule "start with" MTL (other groups have other 3 letter prefix). Then i created a user role for each group and only selected the Printer group for the site and i associated the User Role with our AD Site group called MTL-User.
    i did this for each site. Now when i checked the Request Offering at first, with a user that is part of MTL-User group, it showed only the list of printers that started with MTL. Now today i came to check again and the same user is seeing all the printers
    and not just the ones that start with MTL.
    The User Role i made was based on the Read-Only Operator. I just dont know what the problem is

    Thanks for that link. I had thought of something like that but i found it came to the same thing as just using the filter field that is already available when using a Query Result. I retried using User Roles and figured out that the problem is that my test
    user is only part of the MTL-USER group so when i logged in with him into the portal (cireson Portal btw) i would see the proper result. If i logged in with a actual user that is also part of other groups besides MTL-Users, they see all the printers no matter
    which AD group i define in the User Role. 
    So what i figured was that my group is not getting applied as the filter to the query Result and that the Member section in the User role is only to say who can see the Query result list. But then i have my test user for which this setup works...so im confused
    on what exactly is overriding the results.

  • User Roles not limiting views

    I am working on User Roles and Views in SCSM. I have created a User Role for our Development Support Staff. I have assigned only the Service Request views for that Support Group.
    When I view the console with one of those users credentials, I see all Incidents, Change Management, and Problems that are in SCSM.
    I have checked the User Role and they only have access to the View - Assigned to Me.
    I would like to understand why this user can still see everything in SCSM and how I can go about blocking these views for all User Roles unless they need them.

    User roles are cumulative. If you have user A who is in User role X that has access to all views and same user A who is in a user role that only has access to View 1, 2, and 3 then user A still has access to all views through the user role X.
    In short. The users have access to all those views through another user role.
    Cheers,
    Anders Spælling
    Senior Consultant
    Blog:  
    Twitter:   LinkedIn:
    Please remember to 'Propose as answer' if you find a reply helpful

  • ¿How to use user-roles in Ironport WSA (7.6) using ACS 4.1?

    Hello,
    I want to give a client access to a S370 WSA quarantine and I am using an ACS 4.1 for external authentication; that would be used for administrators and for the client access (non-administration access).
    I have created a user-role in the WSA that has access to the quarantine I want, but I need the user to be in the ACS. I created the user in ACS but my question is, what should I configure or change in the ACS in order for the WSA to recognize the user with the specific role I created and not like an administrator role.
    Thanks for your help!
    Sergio

    Hi,
    This can be done by configuring the Radius Class attribute on the ACS and mapping it with the user roles on the WSA.
    "To map RADIUS users to different Web Security appliance user role types, you assign a role type, such
    as Administrator and Operator, to a RADIUS CLASS attribute. Mapping different role types lets you
    specify the authorization level for each RADIUS user."
    Please go to Page 26-12 of the WSA user guide http://www.cisco.com/c/dam/en/us/td/docs/security/wsa/wsa7-5/user_guide/WSA_7-5-0_UserGuide.pdf for more information under the section "Using External Authentication".
    Regards,
    Kush

  • User Role with All MM Transaction codes

    Hi SAP Gurus,
    I need to create a User role with all MM transactions.  Can anyone please let me know whether Standard User role is available which has authorisations for all MM transaction codes ?  If yes, what is the User role name.  If not, what is the easiest way to get a list of all MM transaction codes.
    Regards,
    Janagiraman.

    Hi,
    sap_mm_all role name is not available in client sap system version 5.0.  The role might have been deleted by someone.
    Regards,
    Janagi

  • User role for service requests from the SSP

    Does the End User role have enough permissions for users to create service requests from the SSP?  I know for incidents it is but I am not sure about service requests.  If you go through the Service Catalog Checklist, step 5 to create the User
    Role brings up a new role based on the Author role and not on the end user.

    here step by step procedure with user access.
    http://www.concurrency.com/blog/scsmportalpermisions/
    Cheers
    Antoine AL Ibry

  • Creation of user roles

    Hi all,
    can someone please explain me how to create the user roles.
    is this a IMG part of Logistics? please explain me in detail.
    kumar

    PFCG is the T.Code for creating roles,& you need to check in T.Code SUIM, which all are the roles that are currently being used in your organization by entering details, like you can enter T.Code: VA01 & execute, it will give you details of all the roles having T Code: VA01, also if you want to check, for any user that what all are the roles which are assigned to him then enter T.Code: YU03.....roles can be attached to to a user through T.Code: SU01..this part is normally done by the basis guys.
    Reward points if it helps
    Regards,
    N

  • User Roles and Authorizations

    As we know in MM different user have different roles to play and they need different SAP transaction and related activies.
    In SAP we define the particular user who are actually allow to access only certain transactions only?
    What are the steps to do this in SAP?
    Secondly in which stage of implementation we define those user roles and assign duties to them in SAP ?
    bEST Regards,
    Kapil

    u can create the user role using tcode su01 and pfcg for authorization management

Maybe you are looking for