Create login user group??

How do I create a login "user group" in Tiger.
I'm trying to create a login user group and assign individual users to that group for permission privileges.
Thx

The easiest way to set Groups, Users, Rights etc, is with Sharepoints...
http://www.hornware.com/sharepoints/
The other way would be with NetInfo Manager, but that requires a lot more knowledge... and Sharepoints is just a GUI into it's settings and other settings.
Assuming this "login group" is via Networking!?

Similar Messages

How to create Infoset&user group query--(query report)

Hi Guys,
how to create Infoset&user group query--(query report),
Pls send me the exact procedure with Example....
Regards:
Kumar .G

goto SQ03 and create an User Group If U want to create Ur Own.
Goto SQ02 to create Ur Infoset by Giving Logical database name or Simple Database table
Then Choose What ever data U need to be included in The Qurey in field Groups.
Then Generate the Infoset
Now Assign the infoset to user group
Now goto SQ01 and Click on Other user group Button and choose Ur user Group.
Then in the USer group select Ur Infoset and then create Ur own Query and save this.
Now select the infoset query and goto More functions under Query menu and Generate report name.
Now Create a transaction code for the report name generated.
Now use the Tcode.
Hope U have got the basic idea of creating Queries.
~BiSu

After 10.1.2 upgrade, Create/Modify User/Group requires re-authentication

I have 3 systems - 2 were 9.x (AS10g R1) upgraded to 10.x (AS10g R2), 1 was installed as 10.x. On the two upgraded systems, after a Portal user logs in (with administration privileges), navigates to the "Administration" tab and clicks either the "Create New User", "Modify User", "Create New Group" or "Modify Group" links, they are prompted for a username and password again. On the system installed with 10.x, this does not happen. Submitted iTar was unresolved. Has anyone seen this before?
Thanks in advance.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

To create new user group

Hi all,
   I want to create a new user group..can u tell me step by step instructions.
Thanks.

Hai,
Here you specify the users who should be authorized to run the query. A user group is always associated with a Functional Area.
         Go to the menu path Environment => User Group. Give a user group name in the screen that comes next.
         Specify the sap logins of the users whom you want to authorize for using the functional area and click on the Create button.
         Use the menu path Assign Functional Area to assign the functional area to the user group.
         Save the user group and back out of the screen by clicking the Back button.
Note: One user group can be assigned to any number of functional areas with logical database or without logical database.
The final step is to create the actual query.
I hope this will help you.....

Can't create new user group

I am logged in as authenticated user,in workgroup manager, and am trying to create a new group so I can restrict VPN access to the users I would add to this group.
Can't see a 'new group' button. There are already 3 groups, staff, admin and 1 other.
(very new to MAC)
Mat

Hi,
Did the issue happen only for you or for multiple users?
Please login on other well worked Lync client from other computer with your Lync account to test the issue.
Please also use another well worked Lync account login your Lync client and test the issue.
You can disable your Lync account from Lync Server Control Panel and clear all SIP related information from AD, then re-enable your Lync account from Lync Server Control Panel to have a try.
Here is a similar case may help you:
http://social.technet.microsoft.com/Forums/lync/en-US/09032674-3927-4898-8f93-f3e6f3eab540/lync-2013-cannot-add-remove-or-move-contacts-or-groups-at-this-time?forum=lyncprofile
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Re: How to create a User Group In EP through webdynpro coding

Hi ,
we have a requirement in which we want to create user group through webdynpro coding . and then we have to assign some user to this group .
Pls Give step by step solution .
Thanks in advance

Hi Mayank,
check the below blog to create group from webdynpro
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0eb5a9d-4256-2b10-79b9-bb0b797ccf73
check 34th page for adding user to group.....
have a try with
addUserToGroup (String uniqueIdOfUser, String uniqueIdOfGroup)
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3641e490-0201-0010-c68f-e51221925714
Koti Reddy

Creating a User Group to publish to all devices in BES... can it be done?

I want to be able to create a contact group to send a text message to all members. I see where I can manually add a group in my BB device and add contacts. Can I do the same from the BES Manager and deploy to all devices. There is an option to create groups, but will it sync or be available to the device on a lookup?
Unfortunately, the devices do not sync to the mail system (Groupwise) address book. There are some customized ways to do this, but nothing that is supported by RIM and Novell.
Carlos
BES 4.1.6

I am trying to simply replicate a peice of text in photoshop so that it is pixel by pixel exactly the same as what I would see in a webbrowser with some text from a css/html based webpage.
Sorry, you can't (without copying text from a browser).
Part of the problem is that every browser renders text differently.
And part of it is that many browsers currently render with an anti-aliasing style that Photoshop doesn't support (color edges).
Then there's the lack of kerning in browsers and ....
We've been thinking about how to replicate browser font rendering, but it's not nearly as easy as it sounds.

How to ensure the SSID matches in prod/dev when creating native users/group

I am running into trouble when I migrate business rules projects-I lose any security assigned to native groups because the SSID in the open LDAP in DEV for that group is different from the SSID in PROD for that group. Is there any way to sync them up now?
Also, for any new groups we create, how do I create them in both environments with the same SSID? I know I can create the group in PROD and use cssimportexport to create the group in DEV, but they end up with different SSIDs
Thanks
Jeff
V 9.2.1 using Active Directory and Native Directory

We are using 9.3.1 so I don't know if this switch is available.
I export the prod ss security with the following switches which gets me all my native groups with sids, and the children of those groups.
export.internal.identities=true
export.provisioning.all=true
export.delegated.lists=false
export.user.filter=none@Native Directory
I hack the file to remove anthing I don't want and then use the import utility to import it twice. First with a properties file that does a delete.
import.operation=delete
The first run fails right after it deletes the native groups I think because deleting the group deletes the children.
The second properties file has this switch
import.operation=create/update
After this is complete you can have DBA do a schema export/import to the target environment. After bouncing planning in the target environment you go in and update the application settings to have the correct shared services server and re-register with shared services. A "Migrate Identities" ensures that you are in synch. The planning security should still be in place on all objects that had security.
Keith

Create new user group on ENTERPRISE PORTAL

Hi people,
I need to know how to create a group of users in the enterprise portal.
Thanks.

Hi sergio torres ,
You have to wrtie all the users in a text file and then import that file into portal.
Find the below link for the fields u have to choose and sample also there.
[http://help.sap.com/saphelp_nw04/helpdata/en/7d/49ae0771924cf4a1fc7e2af7b2e18c/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/7d/49ae0771924cf4a1fc7e2af7b2e18c/content.htm]
Reward points if useful
Thanks
Suresh
Edited by: Suresh Mandalapu on Aug 4, 2008 1:16 PM

WebDAV didn't create 'www' user & group, should I create them manually?

According to the manual this should happen automatically when WebDAV is activated. Should I just go ahead and create the www user and group in Workgroup Manager?

Drop to the shell (launch Terminal.app) and issue the command +id www+ and see if you get a response akin to +uid=70(_www) gid=70(_www) ...+ or if you get a +no such user+ diagnostic.
If the former, the user is created. If latter, whoops, problem.
WGM can show these identifiers if set appropriately, but it doesn't show these (by default) below some value.
(IIRC, users with UIDs below 500 are hidden? It's changed once or twice over the years, and you can look it up as easily as I can.)

How to create more than 2000 users/groups in a good way.

Hi, guys.I want to create more than 2000 users/groups with Java API. Now I use a regular method to implement this function, login; create a domain; open a maxlsession ; and then call a maxl statement to create a user or a group . I find that the performance of this way is very bad. Can I write a funcation or a marco, which can create these users/groups? If it works, How do I need to write these codes?I have looked over all Java API document, it seems that ESSBASE API don't provide some related api which enables developer to generate a function or a marco. If you know the answer to this question, please tell me. thanks in advance.

Dear Frank,
Thank you so much for your answer. Beside the save point functionality to save the state and values on the screen, do you know other ways to do the same function? Once again, thank you so much.
Linh Nguyen.

How to create User Groups

I would like to understand the steps for creating an User Group. I am currently doing SAP-HR configuration activities in Sandbox client & for the purpose of testing I have created an infogroup for "Hiring" action. But the action is not appearing in PA40. I realized later that I was doing some mistakes in assigning the user groups. So, I would like to create a user group. Is it an activity to be done by the BASIS consultant or can anyone create the user and user group in Sandbox environment.
I request your help in resolving my problem.
-Shambhvi

HI,
You have to define the user group while creating Infotype menu and Action.
For infotype menu- V_T588B.
Action- V_T588D- Action.
Define the same user group for infotype menu adn action. Once it done then maintain the same user group against your user parameters.
Go to transaction code su01( if you have the authorization or talk to your basis guy)
Enter you user id (which you used to login your SAP )
Click on parameters tab and maintain your user group there, like
UGR- for Eg. 40( what you have defined in infotype menu and action.

How to create user groups in SAP

Hello Gurus,
Can anyone let me know how to create user groups in SAP-HR Module and who will be creating the user groups.
plz provide me the steps.

Hi Stephanie,
IMG --> Personnel Mgmt --> Personnel Administration --> Basic Setting s --> Maintain User Parameters
Please refer the below links:
http://scn.sap.com/thread/1653026
http://scn.sap.com/thread/1682721
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10eab7af-0e54-2c10-28a5-87b47adbe1a5?QuickLink=index&overridelayout=true&44478681629499
Thanks,
Madhav.

Unable to Create Users/Groups/Orgs in OAM

I have created a admin user [oamadmin] in Sun One Directory Server and configured the admin user as a Administrator during the initial installation/configuration. When I go the Identity System Console, I can see the users from Sun One Directory Server. When I tried to create a User, Group or a Organization, I see the error message
"You do not have sufficient access rights"
Is there anything I'm missing? What should I tune if I have to create users, groups and organizations from Identity System Console? I have included the admin user [oamadmin] in Directory Administrators group in Directory Server.

You have to create a workflow that creates user, group, ... and make the current logged in user (your admin in this case) the initiator of this workflow
for more details check the identity and common administration guide section 5 - chaining identity actions into workflows

How many ways we can create authorization for user groups in sap query reports

Hi Gurus, I am getting a problem when I am assigning users to user group in sap query report .The users other than created in user groups are also able to add &change the users .So please suggest me how to restrict users outside of the user group.
Please send me if u have any suggestions and useful threads.
Thank You,
Suneel Kumar.

I don't think it can be done. According to the link below 'Users who have authorization for the authorization object S_QUERY with both the values Change and Maintain, can access all queries of all user groups without being explicitly entered in each user group.'
http://help.sap.com/saphelp_46c/helpdata/en/d2/cb3f89455611d189710000e8322d00/content.htm
Although I think you can add code to your infoset and maybe restrict according to authority group, i.e.:
Use AUTHORITY-CHECK to restrict access to the database based on user.
Press F1 on AUTHORITY-CHECK to find out how to use it in the code

Create login user group??

Similar Messages

Maybe you are looking for