Create mailbox for eDirectory user

Hello,
How can I create mailbox for an eDirectory user using Novell.Ldap ?
Which are the attributes that have to be set?
Thanks,
Veronica.

Veronica Mandache wrote:
> I have an eDirectory user and I want to create the GroupWise account for
> it(using Novell.Ldap.dll).
> There are specific LDAPAttributes that have to be set in order to create
> a GroupWise account for an eDirectory user?
> My scope is: the eDirectory user becomes GroupWise user also.
>
>
> Jim Willeke wrote:
>> Not sure what you are trying to do. Please explain.
>
>> You could a email address by adding a value to the "mail" attribute.
>> -jim
>>
>> Veronica Mandache wrote:
>>> Hello,
>>>
>>> How can I create mailbox for an eDirectory user using Novell.Ldap ?
>>> Which are the attributes that have to be set?
>>>
>>> Thanks,
>>> Veronica.
Cannot do that without buying Identity manager and the Novell Groupwise
driver for it.
GW syncs one way ----> to eDirectory. It never syncs the other way
without the above software

Similar Messages

Created mailbox for new user in Exchange 2010, user not visible in AD.

Hi everyone!
This morning I created a mailbox for a new user on my Exchange 2010 box.
Everything works fantastically but I am unable to view the new user in AD except by searching. If I run a search the results say the user exists in my Users container, and I can view the properties of the user account from the search results, but I
am unable to actually see the user profile object in the Users container.
I notice in EMC that the mailbox has a user icon on the mailbox icon instead of the regular standard icon - I'm not sure what this implies.
Can anyone offer some advice as to why this happens and how to resolve it?
Thanks!

Hi,
AD objects store in the Domain partition Database.
Its replication Scope is :Domain Wide
Its replication model is: Multi Master
There are two possible cause.
1. AD replication latency if you have several DCs.
You could wait for AD replication or force replication, Click
refresh on ADUC.
2. You create the new user
in other OU, not Users.
You could run this command to get
the user’s DistingushedName attribution.
Get-mailbox –identity
[email protected] |fl
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Office365- I created shared mailboxes for a user- they show on web but not on Outlook2013

I created shared mailboxes for a user- they show on web but not on Outlook2013-
If the user logs on to office365 web - I can see the 3 shared folders- but if when she opens Outlook she is not able to see them-
Do they - should they be manually added ? How ?
Thanks !!

Hi,
Thanks for your question.
Not sure what exactly you mean by "created shared mailboxes for a user", by default, Outlook automatically loads all mailboxes to which the user has "Full Access" permission. So please first check if you have granted the right permissions
for that mailbox to the user.
When I say "By default", I mean you didn't disable the Outlook Auto-Mapping service. If you did, then the shared mailbox will not be automatically added to the user's Outlook profile. So please have a check on this:
https://support.microsoft.com/kb/2646504
Also, please note if the shared mailbox was just created, or the user was just added as a member of that shared mailbox, you probably will need to wait for a few hours for the shared mailbox to appear in the user's Outlook folder.
Regards,
Ethan Hua
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Create new mailbox for existing users?

Hi All,
I am new to JNDI concepts. I need to create new mailbox for existing users in domino directory. is it possible?
Scenario is : I have some users in domino directory. They dont have mail account now. I want to create it.
Kindly guide me...
Thanks,
Ram

Hi,
You can try LSMW (Direct method) for uploading class values.
Upload file can hae following structure:
OBJEK     |     ATINN     |     KLART     |     ATWRT
Release Grou+Release strategy |     Characteristic name     |     Class type     |     Class Value
e.g. rel grp is PO, rel strategy is 01, characteristic name is EBAN_EKORG, and class value is 1000 then
OBJEK     |     ATINN     |     KLART     |     ATWRT
PO01     |     EBAN_EKORG |     032     |     1000
multiple characterstics can be
OBJEK     |     ATINN     |     KLART     |     ATWRT
PO01     |     EBAN_EKORG |     032     |     1000
PO01     |     EBAN_EKGRP |     032     |     100
Regards,
Yogesh

Can Exchange have 2 different mailboxes for same user

hey guys,
I need to know whether Exchange 2010/2013 can have two mailboxes for the same user e.g.
1st mailbox is configured to send and receive emails for: xxxxpride.co.ke and
2nd mailbox is configured to send and receive emails for: xxxxsolutions.co.ke
is this possible? if not how should i go about this scenario?
will it mean I have to run two different exchange and AD servers which will have a different public IP?

No you can not have 2 mailbox for one user. Because, mailbox is associated with AD account and you need authentication to send emails.
In this case you can do following
1. Create a different user account with 2nd email address and Forward that 2nd email to first one. So User is reading 2 email in one mailbox. TO send email from 2nd mailbox assign the send as permission to first account.
2. Add the Alias email address in your first mailbox. (By doing so) User will recieve the emails for both address but cant send from 2nd email address.
You can have multiple domains configured to recive and send emails in one exchange server.Yes certainly
we can create multiple recipient for multiple domains.. Under authoritative domains section of hub transport. External Relay and Internal relay and authoritative domains can be created. you can create email address policies for each domain as well. See the
link below to understand more.
http://technet.microsoft.com/en-us/library/aa996314%28v=exchg.150%29.aspx
UMESH DEUJA MCP,MCTS,MCSA,CCNA

Create folders for other users

I have a process that automatically generates folders based on events in the database using Advanced Queues. This process will work if I am creating folders for the user I am currently connected as.
What I can't seem to do is use the system admin account to create folders in other users home folders. I get insufficient privilege errors when I use findPublicObject to return the users home directory. This seems to happen because the users home folder has a private ACL, it works if I make the home folder public but I don't really want to do that.
Does anyone have a solution for this?

Sure, here are two suggestions.
1. If you want to create the folders in response to the AQ messages, and you want to do so independently of your application's normal security policies, you can use the system admin user to perform the operations, as long as you enable administration mode. Use LibrarySession.setAdministrationMode(true) to do this. Security will be bypassed until you turn this mode off.
2. If you want to make the changes within the concept of your application security model, then modify the model so that your system admin user has access to everything that it needs to be able to update or delete. You can do this by modifying the ACLs on the objects in question.

Is it possible to setup a BB mailbox for one user and a different user's calendar on the same BB?

Is it possible to setup a BB mailbox for one user and a different user's calendar on the same BB?

No, not if your connected to a BES server.

How to create accounts for remote users in 1841

Hi,
I was wondering how can i create accounts for remote users to be able to vpn please ? I have setup the vpn server successfully.
Regard,

Hello.
I believe that you can try this:
Router# configure terminal
Router (config)# password encryption aes
Router (config)# crypto ipsec client ezvpn ezvpn1
Router (config-crypto-ezvpn)# username server_1 password 0 blue
if you are using easy vpn.
from: http://cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a0080455b7d.html

How to create gpo for all users in all ou?????

hello,plz help me.i want to create gpo for all users in all ou.but i dont want that gpo to do in domain????

Can you elaborate what you mean by "but i dont want that gpo to do in domain"?
In terms of applying it to all users, that's simple enough, you can simply leave the GPO's security filtering with its default setting as "Authenticated Users" which then apply to everyone.
In terms of it applying to all OUs, you only have two options.
1) Create the GPO and link it to the root of your domain, so it then applies to the entire domain and all the OUs within it.
2) Create the GPO, but instead link it to each OU that you want it to apply to. You can apply one GPO to as many OUs as you want, simply right click on the OU and select "Link an Existing GPO...". It's then not applied to the root of the domain, only the
OUs, but any changes you make to the GPO are applied to all the OUs that you've linked it to (rather than having a separate GPO for each of them).

Devices no longer sync mailbox for specific user

I have an Exchange 2010 environment running ActiveSync. We have started to enroll devices using Xenmobile which pushes out a mailbox configuration for the users to connect to their mailbox. Everything is working fine with the exception of one user so far.
This user's prior iPhone was working fine and then stopped connecting with no apparent reason. He decided to buy a new iPhone 6 thinking that it would work and he would just ignore the issue on the old iPhone. The new iPhone is unable to sync as well. The
iPhone meets our compliancy checks by Xenmobile and when he is prompted to enter in his password for his Exchange (Windows) account, it appears to accept it just fine. However, mail is never synced. We can see that his device and user credentials are
connecting to ActiveSync in the IIS logs. We have tried disabling/enabling ActiveSync on his mailbox multiple times. I can see that a device is not showing up under his domain account within the ExchangeActiveSyncDevices container. I tried deleting the
container altogether and it is not recreated when he tries to connect. We also have verified that another user can enroll with his iPhone and receive mail just fine, so that rules out any issues with the device itself. It really narrows it down to this particular
user. The permissions on his domain account looked to be the same as everyone else. We are running out of ideas. We do not want to resort to recreating his mailbox since that will take quite a bit of work to backup and restore all of his mail. Any ideas are
appreciated. Thanks.
Update: Using the Test-ActiveSyncConnectivity powershell cmdlet, I verified that his account is able to create an ExchangeActiveSyncDevices object for the Test object.
Update 2: I was told that this particular user is unable to sync his mailbox from another device that was tested from. This seems to point the issue to his mailbox configuration, but we don't know what else to look for other than trying to disabling/enabling
ActiveSync. I updated the thread title to reflect that it is not just his iPhone.

So I spoke with the Exchange admin working on the issue. He did not setup a test as I previously requested. He took Xenmobile out of the mix but still had the connection going through a Citrix Netscaler appliance, which everyone is going through.
They performed a new test by setting up the device to connect directly to the mail server and it worked; mail was able to sync. This tells us that the problem is with something being caught at the Netscaler. In addition to Xenmobile, the Netscaler
as its own connection policies that permit a device from even getting to Xenmobile. It must be getting dropped by that policy, even though the device worked for another user and no one else has reported any problems.
At this point, it must be an issue with the Netscaler, so there is no need for further investigation on the Exchange side. Thanks.

Not able to create request for multiple user in oim 11gr2

Hi,
I am trying to assign a resource to multiple user using oim identity console as System Administrator.
But when i am assigning the resource to multiple user its taking the same value for both the users.
Please let me know how to add the different value for different users.
Thanks

That's the rules of how it works. A request has 1 request form per resource for all users on the request. Those fields must all be marked as available in bulk as well to be viewed if you have more than 1 user on the request. If you need to provide different values based on the user, your best option is pre-populate adapters on the process form and use logic to populate the fields. You will not be able to manually provide different values during the request.
-Kevin

ACS 5.3 Dashboard - Any way to create Dashboard for all users?

I'm at the point of setting up admin access for engineers needing to have insight into the operations and status of our ACS 5.3 systems.
I'm curious if there's any way to create a Dashboard that can be applied to all admin user accounts? (perhaps a custom role?)
I've been able to customize the dashboard for my own account to show what is most relevant, but am unable to figure out how to apply this layout and setup to all other users.
Basically, I have a number of folks that need to see this data, but that I can't exactly count on to setup their own dashboards to show the important details. If there were some way to build a tab/dashboard/portlet, etc (whatver it may be) and have it apply to all users, that would save me TONS of work so that I don't have to login to each person's account and set things up for them.
For example, I want to have all users see a tab/dashboard that shows the applet "Live Authentications", but with the protocol already configured to display TACACS vs the default which is RADIUS.
Any thoughts?
-Chris

Chris,
I see you are looking for read-only access to Dashboard. Currently there is no way to force all Admins to use same Dashboard and all admins will have full control of the Dashboard.
Regards,
~JG
Do rate helpful posts!

How to create template for multiple users and proper variables for DesktopDNA

Here's the scenario:
25 WXPSP2 laptops with only ZENworks Desktop Management agent installed.
Laptops have at least 4 user profiles each. All laptops have same
configuration. I want to create just one image for all laptops and am
using personality migration to handle the different user profiles on each
laptop.
We are using ZENworks 7 on a NetWare server.
Using the DNA Template Editor, I create a template by selecting All local
user profiles on source machine, selecting User Accounts Settings under
System, and name the template DNAusers.dtf.
I then create an application object, CollectDNA, to collect the
personality following the instructions in guide. I associate CollectDNA
with a workstation and select Force Run and App Launcher. This is the
parameter setting: (There is no VOL1 on this server)
/D \\Server1\SYS\ddna\data\%CN%\X-REMOTE1 /T \\Server1
\SYS\ddna\templates\DNAusers.dtf /X
I go to X-REMOTE1 laptop and login as an administrator but nothing
happens. I then click on Application Explorer and double-click on
CollectDNA object and get: could not launch CollectDNA. The network
path was not found. Checking My Network Places, I see no NetWare
Services listed. And, although the ZENworks Desktop Management Agent
policy says to display the ZENworks authentication dialog, the login
screen never appears.
Any suggestions?

OK so I changed %CN% to "Admin" in the application object and restarted
laptop and logged in as Admin in the ZENworks Desktop Management
authentication screen. Nothing happened until I clicked on the
application windows and then it tried to launch CollectDNA but then I get
the Application Launcher status: the network path was not found.
I saw an earlier response you gave to someone else who had the same
message and did the same but still get this error message.
Do you see anything else that I'm doing incorrectly?
> On Mon, 17 Jul 2006 22:59:30 GMT, [email protected] wrote:
>
> > /D \\Server1\SYS\ddna\data\%CN%\X-REMOTE1
>
> if you do a force run with wks associatione (perhaps even selected)
secure
> system the %CN% can not be resolved..
> --
>
>
> Marcus Breiden
>
> If you are asked to email me information please change -- to - in my e-
mail
> address.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net

Error in creating include for the user exit "EXIT_SAPMP56T_002"

Hi,
"treat it as high priority"
when i db click on the include i am got the follwing error message :-
Program names ZX... are reserved for includes of exit function groups
Message no. DS027
Diagnosis
You attempted to create a program name beginning with ZX but this name range is reserved only for includes of exit function groups (function groups containing only function exits).
If you want to create a program ZXaaabbb, note the following for program type I (Include).
1. The program is an include of the function group Xaaa:
In this case, the INCLUDE ZXaaabbb statement should not be inserted in the main program SAPLXaaa, but in the program ZXaaaZZZ .
2. The program is not an include of the function group Xaaa:
Since the syntax check for includes of this name range searches for the global data in the program LXaaaTOP (not ZXaaaTOP), you may not be able to check the include in isolation (--> check main program).
Procedure
Choose a different program name.
cld u please help me out how to further proceed...
awaiting for u r replies...
apprecitaed with points...
regards,
ravi ganji

Hello,
1)That is not Error msg it is just warning - first db click then press enter if there is any msg again press enter off course all these things will happen only your user exit Active.
2)see the import,export and changing parameters if you are new to user exit let us know which user exit you are trying to use.
**********Poorna*********

Uanble to create connection for different users

Hi everyone,
I Have created several users in security manager and created a profile and assigned this profile to all users. However, I am unable to connect to the designer with these users. I have given the master repository info and the userinfo correctly. I am getting the following error. Does anyone have a solution?
CONNECTION FAILED UNKNOWN WORK REPOSITORY
java.lang.ArrayIndexOutOfBoundsException: 0 >= 0
regards
Babu

Here are the basic steps
After logging into Security Manager - Go to Users Tab
Right Click any where to Insert User ( or) on the Tab you will find user Icon with plus , click on it to Insert a new User.
Provide the UserName and Password and in Notes make sure you provide the Complete Name of the User as it would be easy to find in future .
At the end you will find Supervisor Access Privileges and check mark Supervisor . Supervisor users have highest priviledge and can over ride any sub profiles if any assigned to them , so make sure you are giving it to the right users.
Assigning Profile
In the Profile tab , drag in the required profile and drop under the individual USER option profile and this way you can assign the required profiles. Keep doing for what ever profile you want to do so for any number of users.

Create mailbox for eDirectory user

Similar Messages

Maybe you are looking for