Create many thousands PDFs from Word files with VBA

Hi,
I create many thousands of word files from an excel file through VBA.
I need to transalte these word files in pdf files.
How can I do it ?
Possible in VBA ?
Possible to translate all the files in a directory from word to PDF ?

Hi BrunoOrleans,
You can use the 'Action Wizard' in Acrobat to convert a folder of word files to pdf.
Regards,
Rave

Similar Messages

How to create PDF from text file with specific layout?

I wanted to create the pdf from text file in specific layout - Landscape orientation and JIS B3 Page size while at Adobe Acrobat Pro.
In past, I could do a right click on a text file (desktop area) and select print to print out the document into .pdf BUT only if I set the Adobe PDF to Landscape and JIS B3 Page size BEFORE. And I could only do 15 text documents at once.
I wanted to see if I could do the create the pdf from text file with specific layout in Adobe Acrobat without having to go to Control Panel to preset the Adobe PDF to specific layout at every time. I would have to set Adobe PDF back to normal layout after I'm done with these pdf print outs. I do lots of pdfs in normal layout. Sometimes I would forget to do that.
So, How do I do that?

No such luck. It would output the contents in letter size even in JIS B3 Page layout at MS word.
Is there a script or action where I could set the orientation and page size before creating PDF on these text files?

Can't create PDF from Word file

I may be missing some functionality or that functionality may not exist.
I'm running Acrobat Pro 9.2 and MS Word 2004 (11.5) on OSX Leopard 10.5.8. I want to create a PDF from a Word file but NOT using the Print dialog. I want to either create it in Acrobat using File > Create PDF > From File or create it from within Word using the Acrobat menu/toolbar. This is so that it will end up as a tagged PDF.
However, I don't have an Acrobat menu or toolbar in Word. I thought Acrobat was supposed to have installed these into MS Office when I installed Acrobat. And when within Acrobat if I select File > Create PDF > From File and choose a Word file, I get a message "Acrobat could not open 'filename.doc' because it is either not a supported file type or because the file has been damaged". This happens for all Word files.
Looking in Acrobat > About Adobe Plug-Ins... under Convert2AdobePDF it says 'Loaded: no'.
Are these two methods of converting Word files to PDFs something that can only be done in the Windows version of Acrobat? Or is there a plug-in or update I can download to install this missing functionality?
Thanks for your help,
Mark

Keep your Office2004. But Office 2008 does have a way to create PDF's from within the word and excel Programs.
It works better than through the AdobePDF Printer, or through the Apple Print menus save as PDF. (Unless you have X.6.x Snow leopard)
One thing it gets around is a long standing Problem Acrobat has had with word and excel since Word 6.0.1.a/Excel 5.0.1a. Acrobat doesn't know how to interpert Word Page section Breaks. Chopping up a word/excel document in to multiple PDFs that have to be merged back together. MS came up with their own PDF Converter that gets around that problem.

PDF from PostScript file with hyperlinks/bookmarks

Is there a way to include hyperlinks and bookmarks when printing to Postscript file.
Direct Export to PDF creates a huge file size so I need to go the PostScript/Distiller route.

Would it not be possible to use the famous Acrobat Replace Pages featurebug/bugfeature here? (Hyperlinks on, and bookmarks to pages do not get replaced when you replace those.)
Something like:
1. Export to PDF.
2. Print and Distill.
3. Replace all pages in the document from step 1 with those from step 2.
4. Done.

Creating a Continuous PDF from word

I have created a document using the web layout in word and i am needing to create a PDF but have it continuing the whole document, not separated into A4 pages. Please help - how can i do that?

KarinaUrsula wrote:
I am trying to create a continuous PDF document from several jpegs which are article pages i have scanned into jpegs. How do I add more than one jpeg to a PDF document?
As has been already mentioned, Reader cannot create PDF's so maybe you can tell us what you are using to create them?

How do i create high res pdf from psd file?

Hi all,
I've been searching endlessly for this answer however I cant get the answer. My commercial printer is requesting a high resolution pdf file, and i created my artwork in photoshop 2. Can anyone tell me how to create a high res pdf with this file? Someone told me I need to purchase acrobat 9, however from research I've conducted there are no tutorials to achieve this either, and $500 is a little steep for a waste of time

What do you mean by "Photoshop 2"? Are you referring to Photoshop CS2?
If Photoshop CS2, then you have been given the proper instructions.
If the option shown is unavailable to you, then your Photoshop installation is scrogged. Reinstall it.
-Noel

Can I make PDF from xlsx file with Acrobat 8.0 professional?

I'm using Windows 7 Professional (32-bit OS) with Microsoft Office 2007 Basic and have Acrobat 8.0 Professional. Newly installed on replacement computer (deactivated and reactivated license). Don't see PDF icon in any Microsoft Office software. Got great help in getting 8.0 added as a printer devise at SevenForums.com. But when I try to print (since I don't see the PDFMaker icon I'm going via PRINT), it gives me an "Error Printing" message. That got me to thinking and wondering if I can create a PDF using 8.0 Pro to convert these new style MSO file tags (xlsx, docx, and such)? When I tried to UPDATE, message said "There are no updates available at this time." I really don't want to update Pro to the 8.3 anyway mainly because when I had previously updated to 8.3, stuff just got a bit whacky. Any suggestions? Thanks for feedback.

Thank you Dave and Bill for feedback. I know that I'm using older technology with newer technology but for now that's what I've got to work with. I knew Acrobat would eventually stop supported AA8, so I've saved various update patches throughout the years. My earliest is AcrobatUpd814_all_incr.msp. Wondering if I can get earlier upgrade patch because am getting the below error message. Also, via periodic backup's I've noticed that I do have a lot of *.rtp (A_AcroForm_api_811.rtp and M_ACROBATPROFESSIONAL_8_0_HOMEPAGE_html4_810.rtp). Can I use this some how if I cannot find the earlier upgrade patches? Thanks, I know long shots.

PDF from Word doesn't capture entire page

I've created many a PDF from Word documents, but today I'm puzzled. I've created a one-page flyer in standard letter size (8.5 x 11"). I've set all margins - including header and footer - to zero, and placed a top and bottom of page border right at the top and bottom edges. Everything looks fine in Word, but when I convert the document to PDF, approximately a quarter-inch is missing from the left and right sides, and a full half-inch is missing from the bottom.
I've checked Page Setup to make sure of paper size, etc. but don't know what else to check.
Any ideas?
Thanks.

D'OH!
BD, has anyone ever held a parade in your honor?
It took me about three hours to conceive and do the layout for this flyer. Then another 5 hours trying to get it to convert properly into a PDF. When it didn't convert correctly from Word, I fired up Classic, launched an old version of Quark XPress and recomposed the flyer. But when I tried to export it to PDF, Acrobat Distiller (remember that?) just sat and spun its wheels. It did spit out a Postscript file, but it wouldn't actually make the PDF for some reason. Never even generated an error. Then, I accidentally double-clicked the Postscript file, and Preview launched as said it was making a PDF. I was a happy camper... until I discovered that this PDF was cut off on both the top and bottom.
Then I checked my email and found you had answered my cry for help (yet again).
When I followed your instructions (which I did try to find on my own before posting my plea), the PDF came out perfectly on the first try.
My thanks to you for what must be by now the 85th time.
*+The man with the answers is BDAqua.+*

Problem creating pdf from multiple files

Hello,
I'm running Windows XP SP3 with Adobe Acrobat Standard 8.2.1. When I try to create a one pdf from multiple files in Adobe Standard 8.2.1 the application just closes. The two files I'm trying to combine into 1 pdf file are word files. I'm able to create a single pdf of each word file by opening them separately in word and sending them to the acrobat printer. I've tried combining other files also, but had no luck. Windows events doesn't log anything under applications and no error message pops up when the application closes.
Anybody have any ideas how to troubleshoot this issue or what could be causing the applicaton to just close?

I've read many discussions about Acrobat and problems with server files, with the general solution being what you are doing... copy the files to a local hard drive

I am trying to create a print ready PDF from a word file with unacceptable results.

I am trying to create a print ready PDF from a word file with unacceptable results.
The word file has a trim size of 6” x 9”. It has been set to mirror margins with the inner, top and bottom margins set to 0.75”, the outer margin is set to 0.5” and the gutter to 0.14”.
It doesn’t matter if I create the PDF from inside Word, or open Acrobat Pro 11.0.9 and click Create From File, while the resulting document size is correct and the odd numbered pages reflect the correct margins, the even numbered pages do not. This results in some text near the outer margin, as well as the page numbers being omitted.
Does anyone know how to correct this?
I just noticed that some of the odd numbered pages' text is also cropped. Apparently Acrobat is refusing to set side margins to smaller than 1" (@ 3cm).

I'm away from my printer, so I'll try it later. Even so, the proposed test is irrelevant. I operate a small publishing house and am trying to upload certain novels to Ingram, the largest book distributor in the world. The specifications I've set are the specifications they've asked for. Since they've said that the results I'm obtaining are unacceptable, and since they demand submission in PDF form, this renders Acrobat Pro for Mac completely unacceptable for anyone in the publication industry. As far as I can tell, Adobe has a serious bug here that it needs to fix—and at once.

Why do I see incorrect fonts when I create PDFs from Word

When I first started using Acrobat (versions 3 through 5), it was an incredible product because it could create an exact copy of a document I created with a DTP program. I could send that PDF to someone who did not have the DTP program, yet the recipient saw exactly what I created in the DTP program. That's what made Acrobat great. It worked flawlessly.
Now I have Acrobat Pro XI, and I can't create a PDF from Word and get the correct fonts. I've seen quite a few messages on this forum and elsewhere indicating that other people have this problem, too. But I haven't found a solution. I've tried many things that are suggested--embed fonts, don't embed fonts, and different settings. Nothing seems to work. I've spent hours on this insted of doing the job I am paid for (writing). So I'd be very glad if anyone knows how to fix this.
A few specifics:
- Using Word 2010 and Acrobat XI Pro 11.0.3. Windows 64 bit.
- Most fonts are OK, but some appear to be substitutes. For example, some headings that are supposed to be Tahoma bold-italic come out as something different. It's a lighter weight font. I don't know what it is.
- Creation method from Word: Acrobat Tab, Create PDF or File > Save As PDF. Either way I get the wrong fonts.
- Print to Adobe PDF printer DOES produce the correct fonts, but this doesn't help because you don't get bookmarks (which are a critical part of our final PDF product).
- At one point it seemed that a Word setting, File > Options > Save > Preseve fidelty when sharing this document, but it didn't always work.
- I've seen this same problem on four computers, all using Word 2010 and Acrobat Pro XI.
Some messages suggest that rolling back to Acrobat 8 will solve this problem. It's hard to believe that's the only solution.

I was starting to think this might be an issue with font fauxing (I think that's the tech term). You've confirmed it.
Here's what can happen.
Font designers design a font, and (if they have the enthusiasm) bold and italic and bold-italic versions of the font. If you compare carefully, you will see that they are often quite different designs (look at lower case "a" for example, you'll often see that different in italic). Anyway, in an ideal world the font designer has provided four font files. Choose the bold/italic buttons in Word and it (well, actually Windows) picks the right font file.
But Word never forbids you from choosing those buttons even if the font files aren't there. (As an aside, pro design tools like InDesign WILL stop you choosing a style for which there is no font file, because what happens next in Word is considered evil).
If you ask Windows (or Mac OS) to show you a font in italic and there is no italic font file, it will take the regular file and slant each character. This may look different from the italic design font, it may also have different spacing. But to the casual word processor user, all is fine. (The pro designer says "oh my, look at that"). No bold? The font letters get thickened up somehow, often with ugly results, but the casual user is happy, because it's clearly the same font and clearly bolder. These processes are called "fauxing" (from making a faux or fake font).
But what happens in a PDF? PDFs will not faux fonts, and they don't have to. If you make a PDF it's like printing. To print a faux italic font, a slanted font prints. Generally looks no worse than the screen font. To print a faux bold font there are several different techniques, all ugly. One is to print several copies of each letter, slightly set off from each other but overlayed. This isn't only ugly, copy/paste often yields something like BBBOOOLLLDD TTTEEEXXXTTT. Often the printed bold faux font doesn't look much like the screen bold faux font. And here we have your situation exactly.
Now, I see only Tahoma and Tahoma-Bold on my computer too. You could see if anyone seels an Italic/BoldItalic version, or if they are bundled with some Microsoft software (which you'd need to own, the fonts can't be freely copied). But really this is sending the message - use a different font. I'd use Arial, where Windows has had all four files included since Windows 3.1 was released.

Creating a PDF from Word, endnote links jump to wrong page

I have a Word file with a large number of endnotes. In Acrobat 9.5.5 the endnote links jumped to the correct page. In Acrobat XI, which I just upgraded to, all endnotes jump to the wrong page. Somehow when converting the Word to PDF the calculation of what page to jump to is calculated incorrectly. Is this a known problem? I see other discussions on problems with endnotes but they are for different problems. How can I resolve this. I don't want to have to revert to Acrobat 9, but it worked.

Well I tried that. I set the printer driver to Adobe PDF. I then selected all text and hit F9 to refresh all links and saved the file and then went to the Acrobat tab to create the PDF version. Using the application and importing the file to create a PDF causes the same result. I can now see a pattern of what is happening. This has a large number of endnotes, 525. There are probably 30+ endnotes links per page. I noticed that all the endnotes links for the first page that has the links all point to the second page of endnotes in the endnote section (strange that it starts with the second page and not the first), then all the endnote links of the next page point to the third page of endnotes and it continues that way until the end.
Another way to describe this is that the first page of endnote links should point to endnote pages 1 through 4 but they all point to page 2.
I checked and all the links in the Work doc are linking correctly.
I wonder if version XI has been rewritten since version 9 and my case is too extreme for this version and it chokes. I'm trying to rebuild part of the file from scratch and see if the problem goes away since there is a lot of history to this file and it started at least at Word 2007. I'm using Word 2013 now and have converted the format to the 2013 level.
I've sent in a bug report but have not heard anything and talked to customer service over chat but they don't seem to care enough to pass this to development even though it's easily reproducible.
Thanks for your help.

How to save edit settings under preferrences to use when creating or printing a PDF from word 2003 Windows PC 8.1

I have tried to save my PDF settings after editing them, but when I go to "Print" to PDF and check the settings I keep getting Standard default settings.
There is no Adobe PDF listed as a file heading to change conversion settings on my Word screen.
I have tried to create a PDF by open file through the Adobe application and also by trying to print through the Word application with document open and using Adobe PDF as the printer driver.I have changed or edited the settings but they do not appear as an option to select, just the standard default settings.
I have been able to save my setting as a Adobe PDF job options, but can't access them or use them when it comes time to convert to PDF.
Any help would be appreciated. Thanks

I have apprached it 3 different ways:
- by opening acrobat and going to preferrences, clining on convert to PDf
- Microsoft Word, then changes each section of the edit settings, ie
general, fonts, images, etc make the cahneges then hit OK, at this point I
get a save as option rather than a save. It saves my changes as a PDF, but I
am not able to access it when I go to make the PDF.
- I also have tried to print PDF from Word and got to properties to make
the changs with the same results as above.
- Then I tried yur suggestion and went to the printer in the control panel
and had the same results.
I am using mircosoft word 2003 which has been compatable with my windows 8.1
I think the problem may be I am using a "trial" version of Adobe Acrotbat DC
2105 version. It must not belettingme save the setting changes.But this
shouldnot be if they want me to really experience the full effects of the
program.
I appreciate your help, thanks

Question re Create PDF from Word doc

Hi
I am trying to create a pdf from a Word document (Word 2007, Acrobat 8 Professional), and am having lots of trouble with images,fonts and document overhead. With the fonts, i generate the PDF by saying Create Pdf from the plugin in Word. I specify in the Preferences that fonts are not to be embedded. I then open the PDF and access PDF Optimiser -> Audit Space Usage, and it says that fonts take up like 20% of the document, however there are only like 10 lines of text in Arial (9pt), and 6 titles also in Arial (Bold). I dont understand why Font is taking up so much space considering that i have elected not to embed fonts (if i go to the Fonts section in the Optimiser, it shows both embedded and unembedded panes blank).
With the images, i have 2 jpegs in the footer, that are compressed (JPEG -> Low). The other thing i am struggling with is the headers and footers, if i generate the PDF from the Word doc with Headers/Footers, then images take up over 15% of the document. Not sure if there is a way to add headers and footers within minimum impact of filesize? I have tried checking everything in the 3 categories of Dicard Objects, Discard User data and Clean Up. but the Document Overhead remains at 35%.
What else can i do to get these filesizes reduced?I have been researching this for days and have not come across anything that has helped.I have tried to PDF print, i have changed the font to like Courier, ensured no thumbnails or bookmarks, ensured JPEGs are not embedded in the doc, tried Save As, Save As under a different filename - basically anthing you can find on the net i have found and tried, but still cant fix this!!!! please, if anyone knows acrobate 8 better than me / or knows what the problem is, please advise????
Thanks very much.

The colors and size in a graphic needs to be done in a graphics editor. What type of editor would depend on the use of vector graphics versus bitmap. Sometimes vector graphics are larger than bitmaps if you are using a lot of lines that would display better as just a splotch of color. Such are the variations between vector and bitmap graphics, but important if you are looking for size reduction. For a bitmap, I would do the sizing and color depth with IrfanView, but you should be able to do that with PhotoShop if you have it. Vector graphics can be adjusted in Illustrator. The size of vector graphics is not an issue since they are scalable, but the size of a bitmap is important since your are looking at individual pixels and that depends on size. The point is that if you can adjust the color depth and size for the desired pixel resolution, the bitmap is optimized for the conversion to PDF from WORD.
As I mentioned, the smallest file size job options should minimize font storage in the PDF. Checking with the PDF Optimizer does not always give you all of the fonts. I am not sure why. It is better to check the font tab in the document properties to see what has been embedded. There is a preflight macro to embed fonts, you might check to see if there is one to delete fonts (I have not checked on that). Sometimes you can play with the reprint of a PDF, but that is not an option that is generally recommended, particularly if you have any tagging or such. Of course, tagging can really bloat a PDF, but is needed for a variety of reasons such as format for saving back to WORD (not a great workflow), accessability, and related issues. In another topic, there is some discussion of the purposes of tagging and bookmarks. However, the tags and bookmarks take space if that is really an issue for you. The latter are avoided if you use the print to the Adobe PDF printer and do not use PDF Maker in the PDF creation process. Again, there is a trade-off here in terms of size and functionality, particularly accessibility compliance.
Not sure I am helping as I run on, but sort what might be useful for you.

Acrobat Pro 9.1 no longer creates PDFs from Word 2007

I upgraded from Acrobat 7 to 9 specifically to gain more control over settings when making PDFs from Word 2007. This worked as I had hoped until the 9.1 vulnerability upgrade was installed. Now it will no longer create PDFs from Word 2007 documents at all.
From within Word 2007, when I click on "Create PDF" (whether in the Office menu or Acrobat toolbar) it asks for a file name, but after I click "Save" does nothing. This is true even for the simplest possible document, using the "Default" settings for PDF "Preferences."
If I right click the file name of the document in Windows Explorer, with Word 2007 closed, and click on "Convert to Adobe PDF" in the menu, it starts and the staus box comes up, but after a few seconds quits and displays "An unexpected error occurred. PDFMaker was unable produce the Adobe PDF."
I can still "Save As" PDF in Word 2007, but this gives me little control over the format.
Is there any way that I can get Acobat 9.1 to do what I bought it for, and what Adobe advertises it will do?

Try printing to the Adobe PDF printer, the more fundamental process (PDF Maker is a preprocessor for the printer). If that does not work, then try with print-to-file selected. Open the file in Distiller and see if the PDF is created. If the latter happens, then check for AcroTray running in the background. It is required to automate the process and is needed by PDF Maker.

Create many thousands PDFs from Word files with VBA

Similar Messages

Maybe you are looking for