Create Material Master

Dear Friends,
I was in the process of creating a material master. The Material Master shows the current period is 11 2007.
I want the current period as 10 2008.
How to reslove the issue.Please advise.
Regards
Sridhar M

execute MMPV and roll one period after the other until you reach 10/2008.
Or if you have not yet started doing business in this company code, then you can do MMPI and start right away with 10/2008

Similar Messages

MG144 Error Messages while creating Material Master

Hi,
When creating Material Master getting Error for structure field is required. Message Number MG144.
Pls suggest.
Regards,
VR

Go through this note 45998
Or check, which field is required field and try to maintain or just make the optional entry in customizing

Error Message no. MM214 while creating material master

Hi folks!!
While creating material master, when i fill the MRP controller field and press enter, I get the message...
The MRP controller 391 does not exist for plant
Message no. MM214
I have checked, the MRP controller is availble in Master Data for MRP Controller. And we have already created many material master with this MRP Controller.
What could be the possible cause for this error. Please help.
Best regards

Hi Qamar,
Please go thru the bellow threads,
Assignement of MRP controller to Plant
MRP CONTROLLER
MRP Controller
Re: MRP controller extension from plant 1 to plant 2
Thanks,
Swamy H P

Runtime error while creating material master data

hello sir,
i am facing one prolem while creating MATERIAL MASTER DATA.
AFTER GIVING ALL REQUIRED INFORMATION WHEN I AM GOING TO SAVE THE DOCUMENT ITS SHOWING ABAP RUNTIME ERROR.
MESSAGE TYPE: - MDS_KEYMAP.
MESSAGE CLASS: 001.
PLEASE TELL ME WHAT TO DO?
REGARDS..

SIR THANK YOU FOR YOUR REPLY.
I ALREADY DONE THAT DUMP ANALYSIS.
SO PLEASE KINDLY GIVE ME IN DETAILS ABOUT THAT SOLUTION...

Create Material Master Record with Text

Hi, I am looking to create material Master Data via ABAP. I currently have some code that creates the Master Data Characteristic value I want, but I need the text as well. Can someone tell me what I need to do to add the text for the Master Data Characteristic value?
Here's what I have using CL_RSDMD_UPDATE_MASTER_DATA=>UPDATE_ATTRIBUTES_STATIC
TYPE-POOLS: RS, RSSM.
DATA: T_ZFREETEXT   LIKE STANDARD TABLE OF ZFREETEXT.
DATA: T_INFO        TYPE RSSM_S_MINFO.
DATA: RETURN_STATUS TYPE RSARR_T_IDOCSTATE.
DATA: RETURN_SUBRC LIKE SY-SUBRC.
DATA: MSG TYPE RS_T_MSG.
DATA: L_R_ACTIVATE_MASTER_DATA TYPE REF TO CL_RSDMD_ACTIVATE_MASTER_DATA.
INSERT ZFREETEXT INTO TABLE T_ZFREETEXT.
CALL METHOD CL_RSDMD_UPDATE_MASTER_DATA=>UPDATE_ATTRIBUTES_STATIC
    EXPORTING
      I_IOBJNM        = '0MATERIAL'     " Technical name of InfoObject
      I_CHAVL_ENQUEUE = RS_C_FALSE
      I_T_DATA        = T_ZFREETEXT
      I_S_MINFO       = T_INFO
      I_MONITORING    = RS_C_FALSE
    CHANGING
      C_T_IDOCSTATE   = RETURN_STATUS.
IF SY-SUBRC <> 0.
    RETURN_SUBRC = 'Error happened'.
ELSE.
    RETURN_MSG = 'Process Completed Successfully'.
    CREATE OBJECT L_R_ACTIVATE_MASTER_DATA
      EXPORTING
        I_IOBJNM            = '0MATERIAL'
        I_P_Q_HAVE_TO_EXIST = RS_C_FALSE.
    IF SY-SUBRC = 0.
      L_R_ACTIVATE_MASTER_DATA->ACTIVATE(
      IMPORTING
      E_SUBRC = RETURN_SUBRC
      CHANGING
      C_T_MSG = MSG ).
    ENDIF.
ENDIF.

Dear Kenneth,
do you need to add master data during load of transaction data in planning scenario? If yes, you can do this with a planning function of type exit in the INIT function module.
I think you've to use the table ETO_CHAS (table for char. combinations) and all kind of char. combinations has to be transfered.
data:
l_s_chas type /1SEM/_YS_CHAS_"YOURCLIENT"YOURPLANNINGAREA",
l_r_co_area type range of /bi0/oico_area,
l_s_costcenter type /bi0/pcostcenter.
field-symbols:
<f_coar> type /bi0/oico_area,
<f_cctr> type /bi0/oicostcenter.
select * from /bi0/pcostcenter into l_s_costcenter
             where co_area IN l_r_co_area
             and objvers = 'A'.
<f_coar> = l_s_costcenter-co_area.
<f_cctr> = l_s_costcenter-costcenter.
INSERT l_s_chas INTO TABLE eto_chas.
endselect.
Regards, Clemens

Create material master get error message

Hello Guys,
I get the error message as below when i create material master . can you help me?
error message
nternal error in FORM/FUNCTION ckms_buffer_write in position 19 with RC 0
Message no. C+099
Procedure
Please inform your system administrator.
Thanks and best regards,
Alengao

Debug the program with help of ABAPer and check it.
Also pls check these NOTES,
414204, 933809, 390655,0001096890
0001126497
0001164684
0001230454
Edited by: Afshad Irani on Aug 12, 2010 3:12 PM

LSMW--Create Material master data

Hi,
When I use LSMW to create material master data, I set up all step, but when I go to last step "13 Run Batch Input Session", there is error message like "Select at least one view" in moudle SAPLMGMM, screen 0070, anybody can tell me what is problem, thanks a lot.

Hi,
This is due to error while recording for MM01,
Please do a Repeat recording and ensure that once the material number, industry sector and material type is entered, on the next screen you need to select all or at least a single view to create the MMR.
Regards
Merwyn

Is it possible to Create Material Master without Profit Center ?

Hai,
      1) Is it possible to Create Material Master without Profit Center ?
      2) How SAP System Validate Profit Center in material master. ? is it material Type wise ?
      3) Whether PO Order Creation,GRN & MIRO Possible for those material Master without Profit Center.?
Kindly Explain me clearly..
Thanks & Regards,
Swetha

Hi,
Profit center is at the plant level.
You can create material master even with out a profit center.This field will be there in the costing view and and general sales/plant data.
while creation of the materila master if do not select these views system will not ask for that.Normally it is pertaining to the costing analysis.
A profit center manager is held accountable for both revenues, and costs (expenses), and therefore, profits. What this means in terms of managerial responsibilities is that the manager has to drive the sales revenue generating activities which leads to cash inflows and at the same time control the cost (cash outflows) causing activities. This makes the profit center management more challenging than cost centre management. Profit center management is equivalent to running an independent business because a profit center business unit or department is treated as a distinct entity enabling revenues and expenses to be determined and its profitability to be measured.
Business organizations may be organized in terms of profit centers where the profit center's revenues and expenses are held separate from the main company's in order to determine their profitability. Usually different profit centers are separated for accounting purposes so that the management can follow how much profit each center makes and compare their relative efficiency and profit. Examples of typical profit centers are a store, a sales organization and a consulting organization whose profitability can be measured.
For more info,please refer
http://help.sap.com/erp2005_ehp_04/helpdata/EN/cc/36428094f311d2b47a006094b9b0a5/frameset.htm,
Regards,

Unable to create material master

Hi
I tried creating material master using tcode MM01. I have done the basic config to start using MM (i am a FICO guy).
When i create the material master, and try to save, it opens another window of "ABAP Debugger Controls Session" and I am not sure what to do there...when i exit from the debugger screen, it takes me back to SAP Easy Access Menu...
any idea guys why this error is coming.
thanks
Vikash

Hi,
You should get your ABAPer to sit down with you while you are maintaining material master creation and once the same error was encountered, you shall ask them to turn off the 'debugging mode' of the related program.
Cheers,
HT

How to Create material master workflow

Hi All,
Can anybody tell me how to create material master workflow?
i need to customize the workitem for creating data in different views in MM01 transaction with restriction to particular user.
Regards,
Priti

Hi,
This link is to display a material.My requirement is to create a workflow which will allow a responsible person to enter data for specific department data e.g Purchase,Accounting etc.Initially anyone can create data using basic data1 and basic data2 views.After this my workflow will be triggered and it will go to next person who is responsible to enter Purchase data and then Accounting data.
Plz help me to create different views with respect to person.
Thanks in advance.

BAPI or FM Required to create Material Master

IS there any BAPI or Function module avaiable in SAP to create Material Master.
The following Two BAPIs uses Call transaction, which I dont want.
BAPI_RETAILMATERIAL_CREATE
BAPI_STANDARDMATERIAL_CREATE
Please let me know if any other Function module or BAPI Avaiable in the system.
Thanks
Aman

Yep, this one works pretty good.
call function 'MATERIAL_MAINTAIN_DARK'
         exporting
              sperrmodus                = ' '
              kz_prf                    = 'W'
              max_errors                = ' '
              p_kz_no_warn              = 'X'
              kz_verw                   = 'X'
              kz_aend                   = 'X'
              kz_dispo                  = 'X'
              kz_test                   = ' '
              flag_muss_pruefen         = ' '
              call_mode                 = 'ACT'
         importing
              number_errors_transaction = numerror
              matnr_last     = last_matnr
         tables
             amara_ueb      = i_mara    "Basic Data
*             amakt_ueb      = i_makt    "Descriptions
             amarc_ueb      = i_marc    "Plant
*             amard_ueb      = i_mard    "Storage Location
*            AMFHM_UEB      = I_MFHM    "Production Tools
*             amarm_ueb      = i_marm    "Units of Measure
*            AMEA1_UEB      = I_MEA1    "Internal Mangagement - EANs
*             ambew_ueb      = i_mbew    "Accounting/Costing
*             asteu_ueb      = i_steu    "Tax Data
*             astmm_ueb      = i_steumm "Tax Data
*            AMLGN_UEB      = I_MLGN    "Warehouse Data
*            AMLGT_UEB      = I_MLGT    "Storage Type Data
*            AMPGD_UEB      = I_MPGD    "Change Documents
*            AMPOP_UEB      = I_MPOP    "Forcast Parameters
*            AMVEG_UEB      = I_MVEG    "Total Consumption Data
*            AMVEU_UEB      = I_MVEU    "Unplanned Consumption Data
*             amvke_ueb      = i_mvke    "Sales Data
*             altx1_ueb      = i_ltx1    "Sales Text
*            AMPRW_UEB      = I_MPRW    "Forcast Values
             amfieldres     = i_delfields
             amerrdat       = i_errors
         exceptions
              kstatus_empty             = 01
              tkstatus_empty            = 02
              t130m_error               = 03
              internal_error            = 04
              update_error              = 05
              too_many_errors           = 06.
Regards,
Rich Heilman

10 digit code need to be created while creating material master

Hi, Please advise how to create a 10 digit code automatically when we create material master in SAP? Please note that this code is required as one of the basic data view fields, not as material code. Is there any enhancements available for the same.

Dear
Try to use Product Hierarchy field MARA-PRDHA in the Material Master for this purpose
Regards
JH

Set default value for price unit when creating material master data

HI: Every
could you tell me how to use user-exit or else ways to set default value(such as 1000) for field "Price unit" (MBEW-PEINH) when creating material master data(MM01)?
I have try to use Exit:EXIT_SAPLMGMU_001. However, this way cannot respones it.
thanks
Henry

Hi: Ihave find out a solution
Use BADI: BADI_MATERIAL_REF
SPROlogistics general enhancement supplement or change default data (industry)
And then creating a Implementation Name
Double click method: CREATE_MATERIAL
And then write code as below:
method IF_EX_MATERIAL_REFERENCE~CREATE_MATERIAL.
c_mbew-peinh = '1000' .
endmethod.
However, SAP still store '1000' in database evenif we change the default value such as 100 when we use TCode MM01.
in additional, we still use MM02 to change the default value such as '100'
can anybody tell me how to do?
thanks
Henry

Idoc - Create material master

Hi All,
I'm trying to create material master using idoc basic type /AFS/MATMAS04, message type J3AMAT.
Processing the idoc i get the error "The function module IDOC_INPUT_MATMAS01 and the application object type BUS1001006 which were determined are not valid for this IDoc".
It's true that in table EDIFCT there is not this record. but i would like to use the object type BUS1001. How the object type is determined?
Regards
Federico

I found the solution bymyself
check Note 624163 - MATMAS-IDoc not linked to the material
Regrds

PARAMETER ID VALUE NOT DEFAULTED in CREATE MATERIAL MASTER (MM01)

Hi,
Currently when we create material master we like to defualt the field material group, using PARAMETER ID (MKL-Material group).
I have defined the parameter ID for MKL(material group) and assigned a material group value, log off and log in again.
When I create material master with MM01, the PARAMETER ID is not pickup, the field material group is not defaulted with value defiend for the parameter ID.
Anyone know why it did not works, and how to make the material master field defualted with PARAMETER ID??
best rgds,

As suggested by Jurgen Parameter ID wont work for Data Maintenance screens.
You can go for Transaction Variant SHD0 and Set the Field as Default.

Create Material Master using workflow (urgent)

Hello all,
We have an urgent client requirement to create material master using workflow.
Different views for the material master will be created by the relevant departments.
ex: Accouting 1, 2 will go to accounts deptt.
I have studied the workflow tutorial (20 units) on <b>SAP help</b> for leave of absence and have some understanding of objects, methods, bindings etc
I am however finding it very difficult to define the steps to create a workflow for material master. Are there any standard steps already defined that i can use.
Any help/inputs will be greatly appreciated.
Regards
S. Datar

Hi,
You need to speak to a workflow consultant.
You can get workflow to do many things (including creating a material master) but it takes a lot of coding and design.
For those of you who think that workflow is just used for the standard SAP workflow tasks, you have to realise that workflow is far more powerful and far more useful than many people think.
It is always referred to as "Event triggered messaging" but it is more accurate to call it "Event triggered events".
Within workflow you can chain together many different transactions and or ABAPS and so you can get it to do virtually anything you want (as long as you know how).
In this case you need the workflow to trigger an ABAP or BTCI session etc. that works through the MM01 transaction. It is relatively easy to get it to do this, but I am not technical enough to be able to help with the steps involved (sorry)
Steve B

Create Material Master

Similar Messages

Maybe you are looking for