Create Midlet for Bluetooth A2DP profile

Hello,
I'm a newbie. I would like to know if it's possible to create a midlet for bluetooth A2DP profile. If it is, please let me know where i can get information on this.
Thank you so much,
Ken

Now I'm facing the same problem with A2DP on my Nokia 6230 (original player doesn't support it) so I'm about to create my own player supporting this bluetooth protocol. I just wanted to ask you how far you've got with this.
Thx.

Similar Messages

Apt-x Support for Bluetooth A2DP?

Hi,
are there any plans to support the apt-X codec for the Bluetooth A2DP Profile? Maybe that could solve some of the bad A2DP audio qualitiy issues, that are still expierienced by some users (including me) on all the available phones (tested Pre- with 1.4.5, Pre+ with 1.4.5 and 2.1, Pixi Plus with 1.4.5, Pre2 with 2.0 and 2.1, all gave the same issues with different headsets and receivers!).
apt-X seems to be coming quite fast, not only because apple has built in support for it in it's latest products, but also because it offers CD level quality on low encoding cost, which is MUCH more than the poor SBC codec can deliver.
I hope HP with it's Beat audio line of products will consider adding such enhanced A2DP codecs to the mobile devices... wireless headsets are so much more convinient than anything wired can be. But at the momen A2DP sound quality is unbearable with my Palm handsets and I still have no clue where that issue arises from (my last guess is, that it's connected to me being an european costumer and we are few compared to the majority of the us costumers. As far as I understood there are differences in the radio part of the handsets between EU and US devices, so maybe those differences break A2DP Bluetooth quality).
Post relates to: Pre Plus p100ueu (Vodafone)

Thanks for all of the replies. I also saw in the Z white paper that the apt-X codec is not listed, so the question becomes "can apt-X be pushed via a software update?"
For those interested in streaming to your home stereo or powered speaker, here's what I ended up doing.
Purchased a Rocketfish Bluetooth Music Receiver from Best Buy (in the US). It is a pretty slick lttle device, about the same size as the power plug adaptor and it supports A2DP and apt-X. There are two audio outputs: analog via a headphone jack and optical. And it ships with a 6' 3.5mm stereo audio cable and a RCA adaptor.
Setup was easy. Connect the audio to the stereo's AUX inputs, set the stereo's source to AUX, plug in the BT receiver power, turn on the tablet Bluetooth on the tablet and play music.
At first the sound was pretty compressed from MP3's, Pandora and the Google Play service.The fix was to go into the Google Play app > settings > equalizer. Click on "surround sound" and change the setting from "headphone" to "studio".Then play with the equalizer settings to tweak.Results in much improved audio.
Happy camper now... music streaming through the house and no wires!

Bluetooth A2DP profile for Tiger?

I am looking to get a wireless headset to game with for my MacBook Pro - with Bluetooth built in, I figure this is the way to go.
My research so far has shown that bluetooth stereo headsets with microphones are available, but they require the A2DP Bluetooth protocol. Most sites mention OS X doens't support it, but they are also backdated several months.
Can anyone confirm if the latest version of Tiger supports A2DP, and / or if support for it will be included in future releases or updates of OS X?
Thank you!
MacBook Pro Mac OS X (10.4.7)

Joseph, thanks for the post. I'm a Joseph too, must have been fate I found your post. I was very stoked about the iTouch being able to use for Skype. Skype has a section at their site about how it's doable. I have the 3.0 ver on my Touch. I just tried to pair my jawbone to the touch, but no luck. yet, I was at the Apple store yesterday and in a group, including staff, discussing using Skype on the Touch. The staff was telling us the Jawbone & their $79 Platronics would work. I already have a jawbone for my cell phone, but the Touch, when Bluetooth is on, doesn't even find the jawbone device. So, I'm not sure what's next. I'll try the headset you noted.
Thanks for your post.

Bluetooth A2DP profile inside C1-01 available?

Hi,
I just bought my Nokia C1-01 and paired my Motorola BT Headset HT820 for MP3 music. I did this, because some stores which offer this phone mentioned C1-01's available support of A2DP.
After recognizing bad BT-music-quality I took a look at the phone specs. and: there is no support of A2DP (in Europes 4.40 Firmware-version!).
@all
My question: are there other C1-01-devices with BT-A2DP support out there?
@ Nokia-Guys:
Will there be a support for Europe-C1-01-phones later on; i.e. is it planned to do an update?
Or are there any hardware-performance issues which pretends a A2DP-support?
Is it possible for me to get a firmware-version with A2DP-support?
Many questions...
Nevertheless - thanx in advance for your support,
hwu

Funny you should have had the same problem. I have just upgraded my software to V5.4 and the problem
still remains. Very low audio when connecting to any Bluetooth Audio device. Its now 2 Feb when is the fix coming out. Nokia
pundaMilia wrote:
When will it be available ? "...soon..." we ware a month further now...
have you given up????

Can't find bluetooth A2DP profile on my Macbook Pro

Can anybody point me to how I pair my new headphones with my MacBook Pro? It doesn't seem to be able to find the A2DP bluetooth profile.
Is there some download I'm supposed to do?

I have not had the chance to use a stereo bluetooth headset yet so can't really offer any help. You may get a better response posting your issue in the bluetooth section of the forum.
http://discussions.apple.com/category.jspa?categoryID=145

A2dp profile for lenovo n200?

Hi,
Ive 3000 n200 (Vista) and bought a bluetooth headset with works well. But this headset could also works as stereo headset for music. A2DP Profile. So now my question: is this profile activ at my laptop or Ive to activate it? Ive no clue how it works. I can talk at skype but I cant listen music.
Thanks a million in advance.
Greetings from Germany
Markus
Headset
http://www.jaybirdgear.com/bluetooth-stereo-headphones-workswith.php

I think that webpage only shows the specs overview but not the part number. To really go deeper into your laptop spare parts, your computer's "Hardware Maintenance Manual", 42x3553_02.pdf
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-63486
As for the memory query, you can search within this forum with regards to the maximum memory you can install but that would depend on the operating system you are using. With Vista, I read somewhere that it can only recognize and use up to 3.5GB even if you have 4GB installed.

Getting Bluetooth Stereo to Work (A2DP profile)

IT WORKS!
I was terribly disappointed to learn that Apple didn't include the A2DP Bluetooth stereo profile in the iPhone. Since A2DP Bluetooth stereo is an established and stable standard, I can't think of any reason why Apple would not have included it in the iPhone. Hopefully they will add this as a firmware update, in the near future. In the mean time, I found a work-around.
For more than a year, I have been using the Wi-Gear, iMuffs MA110, Bluetooth dock adaptor on my conventional iPod, with great success. My Motorola HT820 headset worked simultaneously with both my cell phone and the MA110 on my iPod. The iPod would automatically pause, when a phone call came in. It was really great and best of all, NO WIRES!
Well, when I got my iPhone home and activated, one of the first things that I did, was to embark on finding a way to get rid that archaic wired headset that comes with the iPhone. The answer turned out to be rather simple, though somewhat irritating. I plugged my MA110 Bluetooth adaptor into the dock of the iPhone. The iPhone asked if I wanted to go into "Airplane Safe" mode. I responded "No." About 10 seconds later, I heard the beep in my Motorola HT820 headset, indicating that syncing had been successful.
I went to iTunes on the iPhone and picked a tune and it played over my HT820 headset. All of the headset controls worked (Play, Pause, FF, REW, Skip, Next) Then, I used my landline to call my iPhone. The music faded and I was able to use the phone function over the HT820.
The only glitch is that when I pause the music for too long, the iPhone removes power from the dock connector, which turns off the MA110 adaptor. This requires activating the iPhone screen and waiting for the MA110 to re-sync with the HT820 headset, before you can use it again. This only applies to pauses that were NOT instigated by a phone call or when you hang up a call and don't start the music again, right away. When you are on a phone call, the dock power stays active.
The irritating part is that Apple's limitations requires me to have a Bluetooth adaptor, at all. At least, the MA110 is quite small and unobtrusive. It's about the size of a quarter and about as thick as three quarters stacked. It's small enough to fit through the dock opening in most carrying cases. See the image here:
http://ActionAmerica.org/images/iPhone-iMuffs.jpg
Note: Your Bluetooth headset must be turned on, BEFORE you plug in the iMuffs MA110, if syncing is to be successful. The same applies to re-activating the dock power after long pauses. Also, the first time you sync your headset to the MA110, you will probably have to put the headset into "Discover Me" mode.
I hope that this helps some of you.
It's not a great fix, but it should hold us, until Apple gets their Bluetooth act together.

what i want to know is if a2dp is entirely a software thing and thus we know its simply a matter of firmware update, or is it hardware related at all meaning that it might not even be possible for iPhone1.0 to ever support stereo via bluetooth? is it possible that the muffs bluetooth adapter has special hardware not in the iPhone is the reason it works?
if its just a matter of firmware, i can only assume its just a matter of time until this is fixed...but does seem a pretty glaring omission. I wish Apple would make some comments on things like this... i really like the look of the motorola rockr bluetooth headsets, and dont want to buy some momo single earpiece one now if stereo is coming soon...

Nokia firmware update for A2DP profile

Sir,
I am very much disappointed as I bought a new nokia bluetooth headset BH-111 with a hope that I would be able to hear good sound quality, but my Nokia C3 is not supporting it now.Neither the controls are working and the quality of sound is mono. It resulted in waste of my money. This problem can be easily resolved by updating the firmware. Please update the firmware for Nokia C3 supporting A2DP profile soon. If this issue doesn't gets resolved it would remove my trust from Nokia Brand.
Thanks

Hi vishesh0311,
Welcome to the Nokia Support Discussions!
yasfer21 is right. I suggest contacting Nokia Support to properly channel your complaints and for the relevant team to check on it.

Bluetooth 2.0 with A2DP profile support

I have a set of parrot Hi-Fi speakers with built in bluetooth connectivity. They require Bluetooth 2.0 with A2DP profile support to pair. Does anyone if the new Macbooks with Leopard OS supports this ??

Hi Sumpey,
IF that device works fine with your Tiger, big chance that device will work fine too with Leopard, especially if there is no drivers involved.
But I cannot be that sure since Leopard is not released yet.
But do check frequently to the device web site and apple sites.
Good Luck.

Advice for Creating a Custom Default User Profile in Windows Enterprise 8/8.1 Preview

Just after some advice on the Best way to create a custom Default User Profile for our Windows 8 Enterprise Image.
We are also looking at the Windows 8.1 Enterprise preview so advice on creating a Default User profile for this would also be appreciated.
My Requirements are listed below
-Pinned Web sites that open in Windows 8 App style IE
-Default Windows 8 pre-installed Apps
-The Microsoft Lync Windows 8 Client from the App Store *I understand this would be tricky, not fussed though if it cant be done*
-Customised Start screen layout
I have tried the Copy Profile tag in the Unattend.xml and syspreped the machine, this did not work.
I have tried using the new "Start Screen Layout" Group Policy object, this also did not work
The Closest I can get was to setup a user profile, Backup the Default User profile, Rename the User I worked on to "Default", Clean up the temp folder, then navigate through the user registry and replaced any absolute profile paths with the %USERPROFILE%
variable. This worked in terms of setting the layout of the start screen, but the Lync App was not present, and Windows 8 apps, eg Video, Music and IE, would crash when attempting to open them.
I know I am doing something wrong, so any advice would be much appreciated.
Thankyou

Still not getting the results that I want, to recap I am trying to do the following.
Create a Windows 8.1 Enterprise Standard Operating Environment (SOE) Image for laptop devices at our school. These devices will be in the Students hands 24/7 and will be joined to our Windows 2012 based domain.
I am trying to create a custom Default user profile for the image so that when a student logs onto the Laptop for the first time they get a start screen that we have created.
The start screen consists of Pre-installed Modern Apps, a modern app created by our Software team that is side-loaded, Office 2013 Applications, and most importantly Tiles for Websites such as our Learning Management System and Intranet Portal.
Now to the issues
I boot the target system into Audit mode, and setup the start screen accordingly. For the Websites,
I open the websites in the IE11 Modern app and use the built in control to pin the site to the start screen. Everything goes and looks as expected.
I then run sysprep with a custom unattend.xml with copyprofile inside it. Again everything runs as expected.
Now when I create a new user on the system the custom start screen appears however the websites that were pinned are no longer on the start screen. BUT when I manually open the Modern IE11 app, navigate to the website and pin the site, The Tile now appears
on the start screen in the location I put it.
<Rant>
Now this puts us in a situation where we can no longer deliver a Standard Operating environment for not just our managed laptops but also our labs where a student just wants to logon and get to work.
Why as a Desktop and System Administrator, who manages a fleet of 300+ Desktops and 1000+ Laptops do I not have the full power to customise things they way I want them.
Yes I am aware of the new Group Policy setting for deploying Start screen configurations, Doesn't work when Web sites are pinned
Yes I am aware of AppsFolderLayout.bin, Doesn't work for Pinned sites.
Do the links above to Microsoft TechNet articles explaining how to customise Start Screens help, No they do not.
Finally I am aware that I can just create a shortcut to the websites and pin those, the issue is that this does not utilise the new Live Tile code that was introduced with IE11 and we plan to use these Tiles as another notification system for our staff and
students.
I will continue to work on this, if I manage to find a solution myself I will post the process, however if anyone in the community, or from Microsoft for that matter, has a proven solution to pinning websites to the default user profiles start screen, please
post it.
</Rant>
Thankyou

I want to be the only one who can access my profile, so how to create passwords for profiles (NOT for websites) ?

I want to be the only one who can access my profile, so how to create passwords for profiles (NOT for websites) ?
thanks

Maybe use the portable Firefox version on a USB stick if you want to prevent access to your profile.<br />
Solutions that use an extension can easily be bypassed by starting in [[Safe mode]].<br />
Otherwise you need to locate the Firefox profile folder on an encrypted drive.
See http://portableapps.com/apps/internet/browsers/portable_firefox

Portege R400 - A2DP profile is not working using BT Stack 5.10.12

Hi,
I am trying to get my Toshiba R400 connected to the Logitech Wireless Music station. I can find the device, but while pairing, it says something like error while connecting with remote device, please try again. It doesn't ask for a passkey unlike my pda, where pairing works just fine.
This only happens with A2DP profile, using headset profile, the stack ask me to push a button on my headset to confirm that everything is working. But there is no button to confirm on a media receiver. It's not really a headset. So I'm stuck hearing the ringing sound but no way to confirm. I don't want to use that profile anyway because I want to stream music, so I wanted to try it with a different stack. But how do I do that? When I uninstall the stack, everything "bluetooth" is gone in the device manager. I can't the device at all.
I'm using Vista Ultimate 32Bit and the BT Stack 5.10.12. It would be great if someone can tell me.
Thanks!

What you can try is to check the following setting:
Right-mouse-click on the Bluetooth systray icon -> Options...->Security-> Custom Level->Mode: Link level enforced security
Try setup again. You can switch back to Standard security if your setup was successful.

Bluetooth: A2DP. Which codec is used in iOS4.3

Hi,
does anybody know, which codec is supported for BT A2DP streaming?
SBC (default)
AAC?
MP3?
apt-X?
Br
Timo

Then again, this is from the JBL press release :
The JBL OnBeat Xtreme iPad dock supports advanced A2DP and AVRCP Bluetooth profiles for interference-free operation, and uses the higher-quality AAC codec – supported by Apple’s iOS devices, gaming consoles from Sony and Nintendo as well as Android smartphones – for superior audio streaming.

Bluetooth a2dp/avrcp

Ever since a week after the first Iphones were released (when I bought my first one), I've been waiting for Iphone to support bluetooth a2dp/avrcp.
I bought a 3G-S yesterday. I have 3 different a2dp/avrcp products I've paired it with: my Sony car stereo, a Motorola MOTOROKR S9 and a 3rd device (I forget the make/model). All three seem to play the music via a2dp fine. But I cannot get skip-to-next-track and skip-to-beginning-of-track ( |<< and >>| )to work on any of them. Play/pause works on the 2nd and 3rd device, but not on the car stereo. On the car stereo when I hit pause I hear a split-second pause and then it continues playing.
So my question is, does the Iphone 3G-S not support the avrcp protocol or is it buggy?

The iPhone 3GS' Bluetooth profile does not support forward and back, only pause and play via stereo Bluetooth. I had this issue as well, and had to dig around the apple site to find out the supported profiles. My car stereo has the capability to transfer the phonebook contacts to the stereo so you can see a name rather than a phone number; however since the iphone's profile does not support file transfer or sharing I cannot use this feature on my stereo. I hope Apple updates this soon as well as the forward/rewind Bluetooth functionality so I can keep my phone secured in my purse without having to take it out to change the song or see who is calling me while driving.
Go to this page: http://support.apple.com/kb/HT3647
it lists the supported profiles. Pay close attention to the * toward the bottom. It states only pause and play are supported.

Bluetooth A2DP and Speakable Items

I would like to get a bluetooth headset for my phone, but it would be nice if I could use it for speakable items as well. In Tiger, I remember that headsets were not supported by speakable items due to their low sound quality.
Since Leopard now supports the A2DP profile, it is possible to use those headsets with speakable items?
Also, does anyone happen to know if the headset can be paired with my phone and my Mac at the same time?

I had a similar experience with the Motorokr S9-HD and found at least a workaround. It seemed when I connected to non A2DP headset, whether it was used or not, the S9-HD could no longer control the playback. If I shut down the iPhone and the headsets and then restarted the iPhone and the S9-HD but not the other non A2DP headset it would again control the play function.
I had the same problem with the 3G but on the 3G the skip and replay/back functions worked with the S9-HD but these functions do not work on the 3GS.
I have also noticed that the audio stream cuts out and I believe this is caused when my exchange server is doing a push - with push disabled I do not have the problem.
Hope this helps and hopefully Apple will get these issues fixed ASAP.

Create Midlet for Bluetooth A2DP profile

Similar Messages

Maybe you are looking for