Create multiple TO's from IM storage type

Bit rusty on SAP transactions.
If I have stock in a 'Differences' Storage Type (non-SU) that I want to bring back into storage on 30 different SU's is this possible?
Other than one by one using LT01. Can I use LT04 in some way?

Pete,
You can also mention a specific qunatity in Material Master WM2 as LE quantity.
Once done you can go ahead with LT01 with Full quantity & that will split in multiple line Items.
Please use TO creation screen control as 1 i.e. Putaway prep that will help you to entre multiple destination Bins (if differs)
Thanks,
mahesh

Similar Messages

How to transfer stock from one storage type another storage type

Hi Guys
I have 10 items
How can I transfer all in One Single Transfer order from one storage type to another storage type
I need to take TO print for all these 10 TO items

Hi,
Goto LT01 transaction with Movment type = 999 and stock category = Required stock category. Create a PCN and process the remaining process so as to change the stock type.
Regards,
Dilli Babu R

WM-Backflushed materials issued from different storage type

Hello my client has an issue in WH Service order issue
we face the problem that articles which are marked for back flushing aren't properly handled by the system with service orders. In normal production orders when the activity is closed on which the articles are set, the back flushing items are atomically issued from warehouse type 100 (location Backflush according to the rules set by LPK1,2,3) however when the activity of an Service order is closed the items are issued from warehouse type 914 creating and imbalance in WM. Please Is it a configuration issue or any other issue i should liik in to.
Kindly guide me to handle this.
Regards
Bheema

Hi,
Please check for service orders, yu should check CRATE parts and RELEASE ORDER parts. In their control cycles in LPK1/LPK2 you can define from which storage type / bin they are consumed when you book consumption against your PrdOrdservice order.
At the time of backflushing (in standard system) the components will go to 914+dynamic bin (or fixed bin, based on your settings). Normally TR creation is set on WM/IM interface and processing the TR you can move the components from WM to interim storage type 914. Thanking you.

Search for material from 2 Storage types

Hi,
When creating a delivery for Subcon PO Via ME2O the transfer order is created automatically from the source storage type
657 ( for example). The requirement is that the system should also look for material from source storage type 460 ( for example).
I did the following customization ( SPRO path):
1) Logistics execution -> Warehouse management -> Strategies -> Activate storage type search - > Determine search sequence --
For the combination of Warehouse number & Mvt type 541 ( GI to Subcon delivery) -- 657 and 460 are assigned.
2) Logistics execution -> Warehouse management -> Activities-> Transfers-> Define Mvt types-> For the combination of Warehouse number & Mvt type 541 -- I have assigned source storage type as 657.
With the above the system does the search from 657 stoarge type only and not from the both.
Is there any other setting to meet this requiremnet?
Best regards,
Prasad

Hi,
I removed 657 source storage type in the 541 mvt type set up ( Source storage type is Blank) . In the Movement Type set up for 541, "Ref.Stor.Type.Search" field is already with 541.
The Storage Type search sequence is maintained for the combination warehouse number & 541 mvt as 657 and 460 ( storage types).
When Delivery is created for Subcon PO, The Transfer order is not created automatcially ( Only delivery is created)
The requirement in detail is as below:
There are 2 plants ( AL70 & AL77) linked to 1 Warehouse (AL1). When delivery is created for subcon PO in plant AL70, the TO is also created automatically with source storage type as 657 and destination storage type as 916. The additional requirement is when delivery is created for Subcon PO in plant AL77, the TO aslo should be created automatically with source storage type as 460 and destination storage type as 916.
Regards,
Prasad

Create multiple sales orders from single service notification?

Is it possible to create multiple sales orders from a single notification (IW51)?
We currently create sales orders directly within transaction IW51 (Create Service Notification). We kick off the sales order creation by pressing the "SALES ORD." button in the notification screen. We're now interested in creating a 2nd Sales Order which would tie directly to the same Service Notification. This is so that we can have the second order assigned to a different account assignment WBS (there are two different parties doing work on the service notification).
I assume you would have to go to VA01 to create the Sales Order, but am not sure how to tie it directly to the service notification from here. I treied to do a create with reference, but there is no ability to create with reference to a service notification.
Do I have to create a second service notification for the 2nd Sales Order for this to work? I want to avoid doing this if at all possible.
I'm running SAP R/3 Enterprise
Thanks for your help!

Hi,
go to vtaa- copy controls for sales document to sales document.
select your combination of order and quotation go to item level. There select value 0(zero) in field positive/negative negative.
No need to change update document flow.
After setting zero in copy control that be told on above. create order with respective to the quotation.
After saving the order.
go to document flow to see the status in between quotation and order.
If you placed setting right, then u certainly observe for quotation status will be open. so you can create no. of sales order with respect to that quotation..
Have a good day..

Can we create multiple billing document from delivery with single line item

can we create multiple billing document from delivery with single line item

Hi
Please check the link
[can v create multiple billing document from delivery with single line item]
and as Lakshmi said, check the forum before posting an issue.
Regards
AA

Can v create multiple billing document from delivery with single line item

can v create multiple billing document from delivery with single line item

Dear Sandesh
Go to VOV7, select your item category. In this maintain K for Billing Relevance
Now go to VF01, give the delivery number and do not press Enter. Instead click on Selection list on the next screen, select the items you want to bill and click copy and continue if necessary
thanks
G. Lakshmipathi

Can't create multiple dependent LOVs from the same bind variable

Hi all,
I'm having difficulty creating multiple dependent LOVs from queries based on the same bind variable in my JSF application (JDev 10.1.3.1). Basically I have a static LOV in a af:selectOneChoice component from which users select a value which then becomes the bind variable value for two separate queries that generate two different dependent LOV. Having developed the code along the lines of Steve Muench 's blog (http://radio.weblogs.com/0118231/2006/04/03.html#a685), the first dependent LOV works really well. The first dynamic LOV gets refreshed whenever the list from the static LOV changes, and I can execute other queries based on the values selected.
The problem arises when I want to create the second dynamic/dependent LOV that has the same bind variable based on the same selected value from the static LOV. Here I would also like the functionality whereby the second dynamic LOV is also refreshed after the selected value in the static LOV changes. Thinking that all I had to do was replicate the methodology used in creating the first dependent LOV, I created the second iterator, invokeAction and other binding components in the PageDef. The executable section now looks like the following:
<iterator id="SelectStaticQueryViewObjIterator"
              Binds="SelectStaticQueryViewObj" RangeSize="-1"
              DataControl="DMSApplicationModule1DataControl"/>
<invokeAction id="refreshDynamicQuery1BindParameter"
              Binds="ExecuteWithParams1" Refresh="prepareModel"
              RefreshCondition="#{empty requestScope.VariableChanged}"/>
<iterator id="SelectDynamicQuery1ViewObjIterator"
              Binds="SelectDynamicQuery1ViewObj" RangeSize="-1"
              DataControl="DMSApplicationModule1DataControl"/>
<invokeAction id="refreshDynamicQuery2BindParameter"
              Binds="ExecuteWithParams2" Refresh="prepareModel"
              RefreshCondition="#{empty requestScope.VariableChanged}"/>
<iterator id="SelectDynamicQuery2ViewObjIterator"
              Binds="SelectDynamicQuery2ViewObj" RangeSize="-1"
              DataControl="DMSApplicationModule1DataControl"/>I now have a problem whereby everytime I change the value of the static LOV, multiple HTML components for the same ADF component are being generated (the LOVs are refreshed via PPR). The surprising thing is that this duplicating behaviour applies to all ADF components listed after the first dynamic LOV in the *.jspx source. For example, I have a <af:outputText="Test Text"/> component created after the first dynamic LOV. Each time the value in the static LOV changes, a duplicate HTML component is created. This also applies to the 'related' second dynamic LOV which is bound to a af:selectOneChoice component - multiple dropdown lists are created. I've checked with the browser's Page Source and there are actually multiple html components being generated with their own unique ADF-generated IDs. I've tried all different options for the Referesh and RefreshCondition attibutes in the second invokeAction element but nothing seems to eliminate this issue.
Any suggestions about how I might create multiple dependent LOVs from the same bind variable that get refreshed when the selected value changes would be greatly appreciated.
Thanks
George

Hi all,
Just updating the thread on how I've overcome this issue. As it stood the manner in which I was trying to solve my use case, as described above, was creating an absolute mess. Then with a blank sheet of paper I quickly realised that a much simpler solution would be to create a whole series of master-detail VOs and build my components around them. Thankfully I haven't had any issues going down this path as yet.
Cheers
George

Create TO from Quality storage type

when i try to create TO for certain material through LU04 , the TO created but the source and the destination are the same ( the quality storage type ) see the details of the TO
2000012767 0001 1014654            Q   918 QUALITY2                250 KG 1
    AE50            02.08.2010         922 TR-ZONE                 250
2000012767 0002 1014654                922 TR-ZONE                 250 KG 1
    AE50            02.08.2010         918 QUALITY2                250
it should be the normaol storage type and the distination shold be the bin
how can i solve this problem

Pete,
You can also mention a specific qunatity in Material Master WM2 as LE quantity.
Once done you can go ahead with LT01 with Full quantity & that will split in multiple line Items.
Please use TO creation screen control as 1 i.e. Putaway prep that will help you to entre multiple destination Bins (if differs)
Thanks,
mahesh

Question about creating multiple XML files from same query

I have a query like this:
select * from emp;
ename empno deptno
Scott 10001 10
Tiger 10002 10
Hanson 10003 20
Jason 10004 30
I need to create multiple output files in xml format for each dept
example:
emp_dept_10.xml
emp_dept_20.xml
emp_dept_30.xml
each file will have the information for employees in different departmemts.
We are using DBMS_XMLGEN package to generate XML.
The reason I need to do this is to avoid executing the same query 200 times for generating the same output for different departments. Please let me know if it is practically possible to do this.
Any input is greatly appreciated.
Thanks a lot!!

one solution i can think of is to use SQLX operator instead of dbms_xmlgen.
here is a sample example.
declare
l_xmltype xmltype;
l_deptno emp.deptno%type;
begin
for i in (select * from emp order by deptno)
loop
    select xmlconcat(
                xmlelement("ename", i.ename)
               ,xmlelement("sal", i.sal)
               ,xmlelement("detpno", i.deptno))
      into l_xmltype from dual;
    dbms_output.put_line(l_xmltype.GetClobVal());
end loop;
end;
/Now here you can open the query once, keep writing to the file till the deptno
is same, when the deptno changes, close the file and open a new file with new
deptno and start writing.
Note : in this way you will have to add the xmlprolog manually to each of the file which should not be an issue. after opening the file add the prolog string manually.
Hope this helps.

Creating multiple XML files from Schema

We are extracting data from Oracle DB into XML using ODI. We are successful in generating the XML file, using command "create xmlfile <file name> from schema <Schema Name>, but the entire data comes in Single file.
Our database schema is relatively Huge and we would like to generate multiple XML files. We want to generate one file per particular number of records. Can anyone help to do this.

one solution i can think of is to use SQLX operator instead of dbms_xmlgen.
here is a sample example.
declare
l_xmltype xmltype;
l_deptno emp.deptno%type;
begin
for i in (select * from emp order by deptno)
loop
    select xmlconcat(
                xmlelement("ename", i.ename)
               ,xmlelement("sal", i.sal)
               ,xmlelement("detpno", i.deptno))
      into l_xmltype from dual;
    dbms_output.put_line(l_xmltype.GetClobVal());
end loop;
end;
/Now here you can open the query once, keep writing to the file till the deptno
is same, when the deptno changes, close the file and open a new file with new
deptno and start writing.
Note : in this way you will have to add the xmlprolog manually to each of the file which should not be an issue. after opening the file add the prolog string manually.
Hope this helps.

How can i create multiple apple ids from the same mac

There seems to be a limit on how many apple ids can be created from the same cpu. Trying to create 100 apple ids for a client to use on ipads distributed to employees i found i could only create three or four before i got the message account cannot be created, contact itunes support. Had the same problem creating multiple itunes accounts through the App Store.

I found this discussion because I need to create dozens of Apple IDs for the faculty and staff of the school for which I'm the IT Director.
This is weak.
Apple, PLEASE upgrade the Apple ID system so it represents the current needs and paradigm.
What am I thinking, Apple (like Google) don't follow user discussion forums, except by accident when an employee sees something and is motivated enough to carry the water for users in need.

How to remove the stock from 916 -storage type

Hi experts,
In LS25 for 916 storage type it is showing 30 & -20 Quantity for two Quants
How to remove the stock?
Regards
vr

the usual way to remove quants from 916 is by cancellation of the picking, which is done with LT0G transaction.
if the delivery is already goods issued, then you have to use LT01 to move the quants.
The positive quant of 30 quantity can be moved to the place where it phyiscally is.
the negative quant can only be eliminated by moving a quantity from a positive quant onto it. You should have a positive quant of this material in any bin of your warehouse. so you move from this bin to 916.

Question about creating multiple output files from same query

I have a query like this:
select * from emp;
ename empno deptno
Scott 10001 10
Tiger 10002 10
Hanson 10003 20
Jason 10004 30
I need to create multiple output files in xml format for each dept
example:
emp_dept_10.xml
emp_dept_20.xml
emp_dept_30.xml
each file will have the information for employees in different departmemts.
The reason I need to do this is to avoid executing the same query 200 times for generating the same output for different departments. Please let me know if it is practically possible to do this.
Any input is greatly appreciated.
Thanks a lot!!

You can write a shell script to generate the multiple spools files for the same output. Below script may helps you.
#====================
#!/bin/bash
n=0
while [ $n -le 20 ]
do
n=`expr $n + 1`
sqlplus -s system/manager <<EOF
spool emp_dept_$n.xml
select count(1) from tab;
spool off
EOF
done
#====================

Create multiple external tables from same flat file ?

using oracle 10g
currently create many external tables like so..
CREATE TABLE "XT_UNITS"
"Q1_2012" VARCHAR2(25 BYTE),
"Q2_2012" VARCHAR2(25 BYTE),
"Q3_2012" VARCHAR2(25 BYTE),
"Q4_2012" VARCHAR2(25 BYTE)
ORGANIZATION EXTERNAL
TYPE ORACLE_LOADER DEFAULT DIRECTORY "XE_FILES" ACCESS PARAMETERS ( records delimited BY newline
skip 1 fields terminated BY ',' OPTIONALLY ENCLOSED BY '"' MISSING FIELD VALUES
ARE NULL ) LOCATION ( 'xtunits.csv' ))
is there any way I can use 1 flat file (csv) to populate many external tables ?
maybe by section ?

Jay wrote:
using oracle 10g
currently create many external tables like so..
CREATE TABLE "XT_UNITS"
"Q1_2012" VARCHAR2(25 BYTE),
"Q2_2012" VARCHAR2(25 BYTE),
"Q3_2012" VARCHAR2(25 BYTE),
"Q4_2012" VARCHAR2(25 BYTE)
ORGANIZATION EXTERNAL
TYPE ORACLE_LOADER DEFAULT DIRECTORY "XE_FILES" ACCESS PARAMETERS ( records delimited BY newline
skip 1 fields terminated BY ',' OPTIONALLY ENCLOSED BY '"' MISSING FIELD VALUES
ARE NULL ) LOCATION ( 'xtunits.csv' ))
is there any way I can use 1 flat file (csv) to populate many external tables ?
maybe by section ?Not a logical question.
An external table definition relates to one or more files.
You could probably create multiple externable table definitions to access the same file(s), but you may end up with some operating system file locking issues if you're not careful, and to be honest why would you need to do that?

Create multiple TO's from IM storage type

Similar Messages

Maybe you are looking for