Create new album with new versions of selected images

Is there an easy way to create a new album containing new versions of the currently selected images?
Some explanation where I need that feature:
First I go through the images and adjust them for the some purpose. Then I need the same images in another place also and I now that there I need them to be a bit brighter or cropped differently or something. So it would be nice to be able to just select the images and say "I want a new album containing new versions of these images".
Is that possible somehow? Have I just missed something while reading (riffling through) the manual...

There is not such an option but it could come in handy. You can use Aperture's feedback to suggest it.
For now the only way would be duplicate versions and move them to another album.

Similar Messages

In IPhoto or IPad, when I edit a photo in an existing album, the photo is removed and placed in a new album with only edited photos. How do I keep it in or get it back to its original album?

When using IPhoto for IPad, can I move photos from one album to another? For instance, when I edit a photo in an existing album, the photo is removed and placed in a new album with other edited photos. How do I keep it in or move it back to its original album?

That will depend on the kind of album your photo is in.
Most albums in iPhoto are created automatic by the way you are using and editing your photos, see: http://help.apple.com/iphoto/ipad/1.1/#blnkb9b1e2a
When you edit your photo, the edited copy is added to the automatic "edited" album and the view switches to he edited album. But the photo should stay in its original album - do you see something different? Only if you want the edited photo in the camera roll and the photo strea as well, you have to save the edited copy to the camera roll again after editing, otherwise the camera roll will show the original and not the edted version.

Create/extend materials for new plant with new profit centers

Hi.
We have created a new plant and want to create/extend the materials from an existing plant to the new plant (with new profit center). Can this be done via MM17?
Regards,
Kjettern

Hi Kjettern,
To extend the existing material to a new Plant/Profit centre, pls follow the following steps: -
1. Copy down the material number (i.e XYZ) you want to extend.
2. Go to t-code MM01.
3. Enter the material number (i.e. XYZ) you copied from (1) into the Material field and hit ENTER.
4. You will get an information on the bottom that "the material type XXX and the industry sector YYY has been copied from master record".
5. Pls note that Basic Data 1 & 2 is not changeable as the same set of material data will be used when a material is extended.
6. Hit ENTER again. To change other details other than Basic Data 1 & 2, select the views that you want.
7. You will be prompted to enter a Plant. Here you must enter the new Plant that you want to extend the material to and hit ENTER.
8. You will get a confirmation stating that the material already existed and will be extended (to the desired Plant u entered in (7)).
9. Ensure that all the data in all the important tabs are maintained, for the right Storage Location, Warehouse Num, Moving Average Price, Standard Price etc. before proceed further.
10. Hit Save. You will get a msg that "Material XYZ created".
Now you are able to use this material number in the new Plant you created.
Hope this helps.
Rgds.

Creating new page with new parent tab

Does this happen to anyone else? When I try to create a new page that will have a new parent tab and standard tab in a 2-level tab setup, it never seems to work right. I end up having to dele the new parent tab and standard tab I created while creating the new page. Then once the page is created, I go into Shared Components -> Tabs, and create a new Parent Tab and assign it to this new page. Seems like a crazy way to have to do it.
I know this sounds crazy and it is hard to explain the issue, but anyone who has had this problem with creating a new page with new 2-level tabs will understand what I am talking about.
Can anyone point me to an explanation on how this should be done? I know I must be missing something.
Thanks,
John

I've recently had to muck around with the 2 level tabs aswell. There are some things making this rather difficult indeed.
What i'd do when creating a new page you want to have under a new tab, but also with a new parent tab, is to create it with only a new STANDARD tab. Don't create a new parent tabset. All parent tabs are in the same tabset, and if you create a new tabset you'll effectively see only this new parent tab + tab on the page you created.
So unless you want the page to be on an absolutely new set of tabs, you'll probably just want the page to be on a new top-level tab with under that a new standard tab. Like so:
<NEW PARENT> | parent 1 | parent 3 | parent 4
<NEW TAB> |
To achiece this, you'll need a new standard tab set. You can create this when creating the page. The standard tab set is the set used for you lower level tabs, so obviously we do need a new one.
As for the parent set which you can choose upon page creation, choose the already existing parent tab set. This set contains all your already existing parent tabs, and you wish to add one for display.
When you finish creating the page and run it, you'll see that the standard (lower level) tab is there, and is set to active, but your parent tab is not there.
Go to Shared Components > Tabs. Select the "Manage Tabs" tab there. You can notice your new set there, but notice the striped outline of it. This tab has no parent tab for it! And this is the problem with tab creation in 2-level tabs: you can make a new STANDARD tab and tabset, and define a parent tab set OR create a NEW tab set with tab. Both options fail us: what we want is a NEW parent tab in an existing parent tab set!
So to fix our problem, from the manage tabs tab click on "Manage Parent Tabs", found on the right hand side of the screen in the region "Parent Tab Tasks".
This'll bring you to a magical new tab within the tab components. It's a mystery to me why it has to be hidden like this, and makes it a real pain to use. On this page you can manage your parent tabs (the only place to do so actually...). Here you'll see there is no parent tab for your page (again), but here you can create a new parent tab from the right hand menu "Parent Tab Tasks" > "Create New Parent Tab". Enter a label, and choose your existing parent tab set as parent tab set. Don't create a new set. As for target, refer to your new page again.
However, we are not done yet. You are returned to the "Parent Tab Management" page. You new parent tab will be shown there, but when you run your page, the parent tab will not be set active yet.
To fix that, go back to the "Parent Tab Management". Select your parent tab so you go to it's details. Firstly, give it a new sequence number, otherwise it'll be shared with one (the parent tabs are created with sequence nr 10, so most probably on a shared position with your first parent tab).
Then turn your eyes on the "Current on Standard TabSet" list item. It'll have an option selected, but take a good look: it'll be the same name as your parent tab. From the options, select your new Standard tab set (the lower level set) which holds your new page. Then apply your changes and run your page: both your parent and standard tab will be there and highlighted. Yay!

Can create new cache with new cache config xml to existing cache server?

Hi,
I have a question regarding coherence cache.
currently there is coherence cache server running with its own cache config file.
Can I create another cache with new cache config file?
If so, do I need add my own cache config file and pof file to the server?
so during cache server start up, it can load cache config and pof config file?
Thanks for the help.
Regards
Julia

Yes, when you want to load your own cache configuration you can use something like
export CLASSPATH=coherence.jar
java -Xms512m -Xmx512m -Dtangosol.coherence.cacheconfig=my-cache-config.xml com.tangosol.net.DefaultCacheServerby using the system parameter tangosol.coherence.cacheconfig you can add your own cache configuration. Note that
the POF configuration is loaded when you are referring to it in your cache configuration.

Have new iMac with latest version of quicktime. But still have FCP5. When try to make a quicktime movie this version only processes 8 sec of a 7 minute sequence. What's up?

Have new iMac with latest version of quicktime. But still have FCP5. When try to make a quicktime movie this version only processes 8 sec of a 7 minute sequence. What's up?
Mike T.

It is strange. I thought 10.x might be the more recent but it also locked up when I tried to the web export. I ran into the no autoplay issue with the webpage so I'll need to look elsewhere to replace a Flash gallery... oh well. Looks like there are probably JS option that might work.
Thanks.

How to sync an iphone created photo album with aperture

hello,
how can I do to sync a iPhone created Photo Album with Aperture?.
First of all, I created a new Photo Album on my iPhone (IOS 5.x), then I want it to sync with Apple Aperture 3, but Aperture created no new Album in the Project Folder. What can I do?
Best Regards
Sigi

If the album was placed on the phone by syncing photos from a computer to the phone, the way to remove it is to sync again but this time remove the checkmark in front of "Sync Photos From" on the photos page of iTunes (if you want to remove all previously synced photos) or change the selection of photos in iTunes to be synce. Each time you sync photos using iTunes it sets the non-Camera Roll photos on the phone to match the current settings/photo selection in iTunes.

Create Smart Albums with Applescript

Hi
I'm looking for a way to create smart albums with Applescript. So far I was able to create simple albums.
Does anybody now if this is possible?
Best wishes
kik

File menu ==> new smart album
LN

How do you stop your phone from creating two albums with the same photos after syncing?

When I first bought my phone I was able to sync my photos by checking the folder I wanted synced under iTunes. This put all those photos on photo library on my phone. I recently added more photos to that folder and tried to sync them it now put them in the photo library album and also created another album with my folder name. So I have two albums with the same photos. I tried in checking that folder in iTunes and of course they're not in my photo library. Please help. I don't want two albums with the same pics

This is how Apple has always handled photos. nothing has changed at all.
Just as your music is in your library and you can access those exact same songs from a playlist, all of your synced pics are in the Photo Library and those exact same photos (NOT duplicates) can be accessed from the album name that you chose to sync.

Does Transfer EBS to new server with New specifications (Ram,Pross ,..)

Does Transfer EBS with same release to new server with New specifications (Ram,pressoser ,..) need new licences ?

Micel 811 wrote:
Does Transfer EBS with same release to new server with New specifications (Ram,pressoser ,..) need new licences ?\does your license is CPU based?
if its user based then No need
please contact oracle sales as they are the best to answer your question .
http://www.oracle.com/us/corporate/pricing/applications-price-list-070574.pdf
;) AppsMasti ;)
Sharing is Caring

Cant use purchased items on new computer with new email address

i bought a new laptop then changed isp from aol to bt then backed up my itunes from old laptop to disc ,tried to put music from discs onto new laptop with new email address and my purchased items are on itunes but cant use them as a message appears saying that i cant play music due to computer not being autherised but when i go to autherise computer in itunes the message your computer is autherised appears ......... please help

I have almost the exact same problem. I have a bunch of music, ringtones, TV shows, movies... stuff that I purchased that I can't authorize. All of these items were purchased with the same account I'm still using now. The difference is that I've changed my email address. I don't have the original email address from when I made those purchases and I'm unable to authorize them. I can see that when I view info on one of these purchases the "Account Name: " has my old email address... not my iTunes or Apple account. So, if I'm authorizing my iTunes using my new email none of these older purchases will work.
I'm really curious how to fix this. I've got quite a few purchases from years back that I'd like access to, but I can't authorize using my new email/iTunes or my old email (the one used for the original purchases).
Take a look at the info and tell me if you see "Account Name:" on one of your purchases. And is that associated to your old email address? There has to be a way to fix this or 'transfer' older purchases, especially if it's all under the same real 'account'.

Using new trackpad with new iMac

Using new trackpad with new iMac, but can't seem to get the "touch function" to work. I still have to press firmly and click on the trackpad to get response. The videos show "touch" while I "firm press and click." Checked speed, cleaned it, and reset. No luck?? Ideas? Even took back to Best Buy and seemed to work with their display...

Assuming you are talking about tap to click, you would need to enable it. It is disabled by default. Go to settings and choose trackpad settings. Navigate to "Point and Click" tab and enable "Tap to Click".

Creating New db(with new name) with the old db backup sql server 2008

Friends..
version: Sql Server 2008
I have a database in a name college1 (more than 200 tables and view etc...)
i want to create a new db with all the structures including the data of the above db college1 with a new name college2
so...i finished the step 1 successfully.. what are the other steps i have to do...like validating the invalid objects. etc....
Step 1:
RESTORE DATABASE college2 FROM DISK = 'D:\DailyDBbackup\college1.bak'
WITH replace,
move 'college2 ' TO 'D:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\college2 .mdf',
move 'college2 _log' TO 'D:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\college2 _log.ldf';
step 2: ?
Step 3: ?
thanks...

but...when i type
use college1
select * from (it will display all tables under the above db)
but when i do..
use college2
select * from (only system tables are displaying..)
Did restore completed successfully ? If yes Expand database , can you see tables in the new database you restored ?. Sometimes when you type incorrect word which does not matches anything you wont get help from intellicense you should not be worried about this
if tables are there in new database college 2
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

How to Reconcile Photoshop Elements 12 Organizer's New People with Previous Versions.

On updating earlier version catalog (Photoshop Elements 10) to Version 12, the older version's "People" tags were not converted to new People (Faces) tags. Images with People tags but not tagged faces were also not converted. Now I have a mess of Family Tags and Group Tages representing people. Nearly all of the new (ver. 12) People groups, when clicked, respond that no media exist. Hours on telephone with Adobe Technicians has been useless. They cannot seem to relate to problem. It must not be in the manual from which they are reciting. At this point, number of crashes and quirks in Photoshop Elements 12 are making me rethink whether I want to stay with Adobe Products at all.

You simply need to create your stills with Photoshop Elements, save them in a suitable format (.jpg, .png, .tiff are all acceptable) then drag and drop them into your iMovie timeline. You don't have to use iPhoto.
Geoff.

How can create Apple ID with new domains such as: .pics, .center, .guru?

Hi Apple Support,
I can't create new Apple ID with new domain email such as: .pics, .center, .guru, ... So, please update or help me fix that problem, thank you!

Why are you creating another AppleID?

Create new album with new versions of selected images

Similar Messages

Maybe you are looking for