Create New Auxilliary Channel Strip in Logic X ? Taken Away ?

Using create new channel strip setting seems to have been removed or is it a bug ? I took the plunge only to find that a lot has changed in the new DAW. I am particularly distressed that one of the best features on Logic 9 has been removed or just DOES NOT WORK. When this feater used to allow me to create multiple AUX channels with the same BUS or have them ascend or descend. This does not seem to be the case anymore. Is anyone out there having the same issue ? In X it just spits out a channel which it should not do . It should allow you to say how many channels and where you want them routed. This seems like a backwards more for Logic. Very dissapointed.

I've got Core Audio going, and my interface is MOTU 828 mkII. My typical workflow has been with Universal Track Mode (UTM) deactivated. What I have seen is that when UTM is enabled on my sessions, the Aux channels switch from stereo to mono with the fader rotated all the way to the left.
That's what I saw when opening my session under the re-installed Logic, which defaulted to UTM enabled. So, I disabled UTM. But now, when creating new Aux strips, I get mono channels even when requesting stereo channels.
Also - typically, when I enable a bus send on an audio channel, the corresponding bus channel would appear in my Mixer. Now, that's not happening.
Thanks for your feedback thus far, Erik. - j

Similar Messages

  • LP8: "Create New Auxilliary Channel Strips" won't create stereo

    I have recently reloaded Logic Pro v8.0.2 onto a newly reformatted drive running OSX 10.5.8. I have opened a previous session, and brought Logic back out of Universal Track Mode. My mix busses had been converted to mono, so I deleted them and am attempting to recreate them. I'm having trouble creating stereo Aux channels to serve as stereo Bus channels.  I try:
    Mixer > Options > Create New Auxilliary Channel Strips
    I choose these options:
    Format: Stereo
    Input: Bus 3-4 (for example), "Ascending" is checked
    Output: Output 1-2
    Upon clicking "Create" I get a mono track. In this example, a channel named Aux 3 which will only accept a mono input. I can therefore assign Bus 3 as the input on this Aux channel, but not Bus 3-4. There's no mono or stereo link-rings icon in the lower left of the Aux strip for me to toggle between stereo and mono.
    Could someone explain what I'm doing wrong? Happy new year, all. - Jeff

    I've got Core Audio going, and my interface is MOTU 828 mkII. My typical workflow has been with Universal Track Mode (UTM) deactivated. What I have seen is that when UTM is enabled on my sessions, the Aux channels switch from stereo to mono with the fader rotated all the way to the left.
    That's what I saw when opening my session under the re-installed Logic, which defaulted to UTM enabled. So, I disabled UTM. But now, when creating new Aux strips, I get mono channels even when requesting stereo channels.
    Also - typically, when I enable a bus send on an audio channel, the corresponding bus channel would appear in my Mixer. Now, that's not happening.
    Thanks for your feedback thus far, Erik. - j

  • Problem in creating new communication channel template in IR

    Hi experts,
    I currently have problems with creating new communication channel template in Integration Repository. If I choose the New-Context (Adapter Objects-->Communication Channel Template) the dialog "CREATE OBJECT" is shown. After I have inserted the Name of my template I push the create button.
    Then the following error occurs:
    STOP: Internal error: Object cannot be changed in display mode
    DETAILS: Internal error: Object cannot be changed in display mode(CANT_SET_MODIFIED).
    So can anybody help me. Thanks for your help.
    Best regards.
    Mario

    Hi Mario,
                This is genral problem appearing in PI 7.0 with SP12.
                Previously, i have the same problem.
                i.e STOP: Internal error: Object cannot be changed in display mode
    DETAILS: Internal error: Object cannot be changed in display mode(CANT_SET_MODIFIED)
                Regarding this we raise an OSS note SAP people.
                they gave the suggestion that update with SP13.
              i discuss with basis team and install the SP13.
               now the problem is solved, i can able to create the Communication Channel Template.
    Please award points, if it really help to u
    Regards
    Mahesh.

  • How to "Create New RSS Channel" in GroupSpace.

    I try to create new rss channel following groupspace document( http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/groupspace/index.html ).
    but it have some error "Failed to add RSS channel. Be sure this URL returns valid RSS output.".
    I put "http://rss.news.yahoo.com/rss/oddlyenough" in input box follow the document.
    I missing some information except the document?
    Thank you .
    Ron.

    use the standard java system properties (either through command line or code)
    http.proxyHost,http.proxyPort,
    http.proxyUser,http.proxyPassword - If your proxy needs authentications
    regards
    deepak

  • Can Photoshop Element 12 create new alpha channels?

    Can Photoshop Element 12 create new alpha channels? I wanted to create one to help with blurring the background and I saw the step by step on line, but I can't find where the channel panel is? I have a PC

    There is no channel panel in Elements. You could add some paths and channel features with third party add-ons like Elements+, but the real solution is to use a tutorial for Elements, not for Photoshop. There are always several ways to achieve something in Elements or Photoshop. Using alpha channels is only one way to help with blurring the background.

  • Create new portlet channels dynamiclly

    I'm looking into how to create new portlet channels when a new tab is created so that the portlets can be customized on each tab. Currently when a portlet is modified from one tab the portlet gets modified on all tabs. Can somebody point me to an example on how
    this might be accomplished?

    I'm looking into how to create new portlet channels when a new tab is created so that the portlets can be customized on each tab. Currently when a portlet is modified from one tab the portlet gets modified on all tabs. Can somebody point me to an example on how
    this might be accomplished?

  • Using Platinum Voicemaster Pro Vocal Channel Strip with Logic Pro & MBox 3

    Hiya,
    I was wondering if you can help me please.
    I have a small little home studio that I am currently building (just to record vocals mainly to instrumentals as I am singer/songwriter).
    I am currently using Logic Pro 9 and MBOX Mini 3 as my midi interface but my producer who is based overseas told me to get a preamp. Many musicians have suggested I purchase Platinum Voicemaster Pro Vocal Channel Strip. CAN ANY CONFIRM WHETHER THIS WILL WORK WITH LOGIC PRO 9 AND GIVE ANY ADVICE AS TO HOW IS THE BEST WAY TO USE IT WITH LOGIC PRO 9 AND MY MBOX MINI 3?
    THANK YOU SO MUCH FOR YOUR HELP.
    RUSHELLA
    X

    Thank you both for your input. I am back on the case again, this time with a fully functioning FCB1010. Right ou of the box the pedal does successfully send volume and pan with expression pedal a and b respectively.
    What I would next like to accomplish is to have exp. ped. b now control a plug-in parameter instead, the pedal range on the fuzz-wah plug-in of Logic Pro 7 for expample.
    When I use Automation Quick Access to edit the assignment of ped. b as Bryan suggested, Logic appears to be receiving the info from ped. b and creating the new assignment (as indicated in the Controller Assignments window), and yet the actual functionality doesn't change, that is, ped. b continues to control pan.
    Any suggestions?
    Best regards, Dan
    Dual 2 GHz PowerPC G5   Mac OS X (10.4.8)  

  • Channel  strip inserts Logic Express 7.2.3

    When I click on the inserts of an Audio Inst track channel strip I may choose Instruments from Logic Express, GarageBand, and Jam Packs 2,3 and 4. When I try this on an Audio Track the insert offers only the Logic Express and GarageBand Instruments but no Jam Packs. After reading ALL the pdf manuals and the M Sitter book, and spending 3 hours every day the last 6 months reading this forum I still don't know the current corrrect file paths for the garageBand and Logic Express 7.2.3 or the Jam Packs 2,3 and4. At the local Apple Store I was shown a version of Logic Express which had ALL these Jam Packs in BOTH types of Audio/Audio Inst tracks.
    Mac Mini   Mac OS X (10.4.8)   M-Audio 49e USBMIDI Controller

    Jam Packs contains loops and instruments, not channel strips. To view your loops go to Audio>Loop Browser. Then you will be able to view all of you JamPacks loops. Also, JamPacks contains new software instruments. To use the software instruments that come with jampacks, go to a software instrument track, then use the EXSP4 sample player as the I/O for the track. Navigate down to GarageBand and the instruments from jampacks should be there. It's not something that really stands out. It's just that it increases the number of instruments by a lot. And with the loops, you can sort out just the jampacks loops to see what it offers.
    Matt

  • Restore Channel Strips in Logic Pro (9.1.8)

    Hi all,
    i´ve accidentally erased a channel strip setting (yeah I know, shouldn't have done this...). It is one of presets Large Spaces - Clean Room.
    (IMO this is some stupid option. The descriptions sounds like deleting the setting from the song and not out of the library. Anyway.)
    I am not able to set Logic Pro to the origin defaults; I reinstalled Logic, after deleting it completely and erasing all config files manually. But it does not make any changes to the library. The channel strip setting is gone.
    I CAN find the file on the HD (~/library/application support/ logic/channel strip settings) that means the cst-file, but there seems no way to import it, right?
    How can I restore the original channel strip setting library?
    BTW: I have the new iMac without any DVD drive; so installed Logic Pro via AppStore.
    Hope someone can help... thank you!
    Dan

    Hi
    If I understand you correctly, you have deleted the Channel Strip "Clean Room", but you have a 'spare copy' in
    <User> Library:Application Support:Logic:Channel Strip Settings?
    Orphuune wrote:
    I CAN find the file on the HD (~/library/application support/ logic/channel strip settings) that means the cst-file, but there seems no way to import it, right?
    How can I restore the original channel strip setting library?
    IF this is the right Setting, it should already show up in the Library, provided that it is placed in the correct (Bus) sub-folder. You could always copy/move it to the correct location for the Factory files;
    Library:Application Support:Logic:Channel Strip Settings:Bus
    If this is not the correct Setting File, perhaps you have used it in another project, such that you could re-save it?
    CCT

  • Where can I download new fresh Channel Strips?

    Does anybody know where I can find new channel strips for new sounds?
    Thanks

    Hi,
    Try LogicProHelp.com there's a sub forum there just for channel strip settings and instrument and effect presets:
    http://www.logicprohelp.com/viewforum.php?f=8&sid=797bb8085d0029b70b5aacf1a3c49b a1

  • How to create new MTA channels for redirecting mail.

    I have to forward a mail to faxserver.Faxserver has its own mail id on messaging server.When I send a mail to a user on my messaging server it should automatically be forwarded to faxserver user account.For that I need to make a new rule and channel.Please suggest me the way of writing rule/channel with an example.

    "Faxserver has its own mail id on messaging server" What messaging server? The iMS machine, right? In which case then no you do not need a new channel.
    The mail will be accepted, and once the final address is determined then the final domain and the rewrite rules will determine just what channel this message will leave via. It'll be either tcp_intranet or tcp_local is my guess.
    As for creating a new channel. The manuals should have some examples of that. You could always use an existing one as an example. If you search through things that I've said on this site you'll find examples.

  • Cannot create new virtual network adapter on logical switch team

    I am currently moving from Hyper-V 2012 to Hyper-V 2012 R2 and in turn I have just installed SCVMM 2012 R2. I am using SCVMM 2012 R2 to create some NIC teams which I have done no problem in the past with SCVMM 2012 SP1. Now we have everything set up just
    like we did in the past and it seems to create the NIC team just fine. The problem is when I try to create a New Virtual Network Adapter, when I click the button, it immediately says:
    VMM cannot create the virtual network adapter. Either there are no VM networks associated with the network sites that the uplink port profile "Logical Network Name" Connects to, or the VM networks associated with those network sites all use Hyper-V
    network virtualization.
    Now I've checked and the VM Network is assigned to the logical network that is associated with the Network Site that contains the host I'm working with. I've also tried disabling Hyper-V network virtualization but that didn't change anything and I thought
    that it's always enabled on 2012 R2 anyway.
    I would like to gain network connectivity to this team at least for testing purposes and we also are planning on building a Hyper-V cluster. Were some new restrictions added in 2012 R2 to prevent creating virtual network adapters in this scenario or am I
    doing something wrong?
    Any information would be helpful. Thank you in advance for your time!

    Hi Sir,
    Glad to hear that the problem has been solved , thanks for your sharing .
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • Can't create new auxiliary track,..somebody help me

    I can't create new auxiliary track in logic pro
    my way is.....in mixer window .... Option>>Create new auxiliary channel strip
    or I click at  +  in mixer window
    I have only one aux track although I added aux track number...as 2 or 5 or how many i want....
    It still appeared only old one of aux track.
    In my previous project, I could create many aux track BUT in my present or next project I can't create it....I don't know why.
    I don't know did I pressed any botton or not... and made this problem.
    Please..Somebody help me plssss

    Top right in the Mix-Window: Is the button labelt AUX engaged?

  • Solo Button in Channel Strip with Red Line

    Solo Button in Channel Strip with Red Line through it and it won't solo?
    How'd it happen and how do you get rid of it?
    Thanks!

    Try This----From the Manual
    Logic Pro, Express: Solo Safe mode may not remain disabled for a particular channel strip
    Symptoms
    In certain projects, "Solo Safe" mode for a channel strip may enable each time you load the project, even after you disable it and save the project.
    Resolution
    When a channel strip in Logic is "Solo Safe", it remains audible, even when other channel strips are soloed. Solo Safe is indicated by a diagonal red line through the solo button on a channel strip.
    You can manually toggle the solo safe status of a channel strip by Control-clicking its solo button. There are times when you may find that a particular audio channel strip in a project reverts to solo safe mode when you load the project, even after you manually disable solo safe. Here is why that may happen and steps you can take to prevent it from occurring.
    A Logic project contains a special audio channel strip used for pre-listening to audio in the Sample Edit window, Audio Bin, and Loop Browser. When you create a Logic project from one of the factory templates, this channel strip is assigned to "Audio 256". This channel strip stays in solo safe mode so that you can always preview audio. The image below shows the channel strip for a new, empty project.
    If there is no audio channel strip in a project assigned to "Audio 256", Logic will use the highest-numbered available audio channel for pre-listening. When the project is loaded, that channel strip will be put into solo safe mode. You may find this happens in older projects that you open in Logic 8, or in cases where you have deleted the "Audio 256" channel strip in a Logic 8 project. To prevent this from affecting channel strips you are using in a project's arrangement, follow these steps:
    Choose Window > Environment.
    From the Environment window menu, choose New > Channel Strip > Auxiliary. A channel strip will appear in the environment.
    Select the channel strip. It will highlight.
    In the Device parameter box in the upper left of the Environment window, click the arrows to the right of "Channel" and choose Audio > Audio 256 from the menu.
    Select the text tool, click on the name below the channel strip and name it "Prelisten".

  • Output channel strip blank

    Has anyone seen this ?
    I'm using Logic Pro 9. In one of the songs I'm working on, the output 1-2 channel strips ismblank. It doesn't have any of the insert buttons and I can't select any of the presets. (ie. Pop mastering, etc.)
    I tried deleting the output strip and creating a new one, but that didn't work. It just created another blank channel strip.
    Thanks for any help...

    Do you accidently have a channel set to surround?

Maybe you are looking for