Create new BW System in EP

Hi all,
I'm trying to create a new system in EP to connect to BW but not able to succeed in Connection test.
Following are the properties I have given.
application host,gateway host & service, logical system,sap client, sys number, and system type as SAP_BW etc.
But still not successfull..
Do we have any other settings that I'm missing? Any guide for this?
Thanks in advance for your help.
Best Regards,
Shiva.

Shiva,
You should also look at the following help links.
http://help.sap.com/saphelp_nw04/helpdata/en/2f/741a403233dd5fe10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/7e/821640b7b6dd5fe10000000a155106/content.htm
I used the information in both of these links to establish our BW 3.5 system connections in our Portal systems. We are on EP 6.0 SP13.
Regards,
Dave Klepper

Similar Messages

Unable to create New Business System

Hi
I Installed XI 3.0 and configuring as per the configuration guide.
When I try to create Business System (SLD) I get the following error message.
"Integration Server already defined There is already an integration server defined for the selected technical system. Please select role Application System."
Steps:
Logon on to SLD
Click on New Business System
Name: XID and click on Next
Technical System Type: Web AS for ABAP
Select System: XID on Hostname   and select Client
Installed products: Choose all and click Nextt
Integration Server:
Business System Role: Integration Server
Pipeline url: http://HOST:PORT/sap/xi/engine/entry?action=execute
Initially I created Business System with wrong Name (P01) . I deleted it and try to recreate with new name (XID) I get the above error.
How to create a Business system and assign the role of Integration Server?
Thanks for the Help
Raghu

Hi RG,
      Once we had   same error ,due to some reason business system with role integration server deleted.
       It has been resolved by deleting XI technical system and recreating same after that it allows to define new bussiness system with role as integration server .
It might help you.
Regards
Santosh

Creating new Source system problem

Hi there,
System: BW 3.5 client 010, want to connect to R/3 4.6c Sandbox client 0101
we just refreshed our BW 3.5 sandbox with current production data. Now we want to create the source system via RSA1 to point to R/3 Sandbox. When we try to create this we get this new error. I am not sure why it is
Error:
Logical system BIX010 exists already
Message no. R3222
Diagnosis
The SAP Business Information Warehouse BIX010 is already connected to the source system. A multiple connection is not possible.
For some reason, it is reading as BIX010(talking to the system itself) - BW Sandbox systems, it should be doing the source system creation for SBX010 not BIX010 (talking to the system itself)
I tried to create the system manually and automatically, still no luck.
I cannot see SBX010 source system in teh RSA1, I am afraid it might be in the database table and not showing up in the transaction RSA1, does anyone know the table that it has this information, so I can se16 and look at the entries?
Does anyone knows where to look for?
Thanks in Advance
Kumar

Goto SM50 and check for ABAP connections. Look for SBX010. If you don'T find it here you have to create it. Check also BIX010 if it'S connected to the right system.
Regards,
Juergen

Creating New Source System

Hi All,
I am trying to create a new source system in BW for the new R/3 client which is a copy of PRD.
So now new R/3 client is 200 and also PRD is 200. I did all necessary steps and i found difficulty when i am assigning logical system based on client. I found key is only client, so as PRD system is already mentioned with client 200 i am not able to create new entries and i hope this causing me error.
So by creating RFC destination directly in SM59 and when i tried to create it says PRD Client already available. Though i have specified new client server name.
Kindly advise.
This is quite urgent.
Thank You.
Best regards,
Bhuvana.

hi,
it seems rfc connection between bw and r/3 not established properly, check with transaction sm59 (ask basis help if no authorization), choose r/3 source system rfc and menu test->authorization. check if user name and password, hostname/ip address are correct.
this doc 'bw r/3 connectivity' may useful http://help.sap.com/bp_biv235/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
hope this helps.

Creating New Source System Connection

[First post, so go easy on me!]
I have created a source system connection in BW QA, to an additional R3 QA client, but I am unable to assign any datasources to the new this new connection. [I know that I should have created the connection in DEV and transported through, but I need this connection for a small test, that won't be used again.]
To get round this, do I need to have my BW & R3 clients 'opened' again, then transfer the 'Application Component Hierarchy' via RSA9, then 'Replicate Datasources' in BW. If not, does anyone have any suggestions?
Thanks in advance.
Scott

Scott,
You will have to transfer the BC datasources that you want to use from R/3 to BW.
in BW, right-click your source system in the modeling tab and select replicate datasources, this will take you through to your R/3 system. Select the datasources you want to use and transfer them. Then go back to your BW system and right-click the source system and select "Transfer datasources". This should make them available.
If when you have got through to R/3 to transfer the datasources you are told that cross-client customising is not available then I think that you will have to get the client opened up.
Cheers,
Stuart

Change Default Background User In BW When Creating New Source System

Hi all,
I would like to create a new Source System in RSA1.
In Source Systems > SAP > Create > Connection of source system to BW
the Default background user in BW is u201CALEREMOTEu201D.
How do I change this to another user?

Just want to say thank you. I could fix a problem with your information.
I was searching to change the background user from ALEREMOTE to BWREMOTE as all our process chains were running on ALEREMOTE.

SharePoint 2013 creating new farm system.formatException ?

I have SharePoint 2013 and my farm is not working I wanted to create new farm it give error System.formatException
you can see my question and the image in here also:
http://sharepoint.stackexchange.com/questions/138926/i-want-to-create-new-server-farm-in-sharepoint-2013-it-give-validation-error

Hi,
According to your description, my understanding is that you failed to create a new farm.
It seems that several issues exist in IIS. Please go to IIS manager > each site > advanced settings > general > ID to see if it is beyond int32 range or includes non-number value. Besides, please reset IIS and reboot the SQL server.
Please have a try to create new farm with power shell.
How to create new farm with power shell in SharePoint 2010:
https://habaneroconsulting.com/insights/create-a-sharepoint-2010-farm-with-powershell#.VTXDSHkcQ5c
Several similar posts for your reference:
https://social.technet.microsoft.com/Forums/en-US/658f6d99-60be-4e1d-b81b-7640eb5545f0/configuration-wizard-error-systemformatexception-was-thrown-input-string-was-not-in-correct?forum=sharepointadminprevious
https://social.technet.microsoft.com/Forums/en-US/a59993bb-abe0-44e6-89f6-a86f0dbdd23a/systemformatexception-input-string-was-not-in-a-correct-format-exception-when-creating-a-new?forum=sharepointadminprevious
http://stackoverflow.com/questions/14434926/sharepoint-products-technologies-configuration-wizard-system-formatexception
Best Regards,
Dean Wang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Creating new source system in bw

hi all
i have got one problem with creating source system to bw from r/3,i have created RFC connection to bw and r/3
and i was trying to create source system manually and automated but it is not activating i'm getting fallowing error
...the fallowing errors occurred in the source systemrsar--mess no 374
....result of destination check timeout rsarmess no 375
can any one help me on this please

Hi!
Check out the connection with defined RFC.if it is ok,then check out the privliges for the user using which yuor trying to create the source system.
Best Regards
Sunil.

Steps for creating new source system

Hi guys
We are on BI 7 and ECC 6 now...We are planning to get the data from other source systems (R/3 4.6)which are existed in different place.
Now my question is what are the steps to get the data from this new Source system and whats BI developer role for this...
Example: Inorder to establish the connection between BI and R/3 we need an RFC connection (Is this done by BASIS / BI )? If its BI , then what do I need to ask for ?
afterthat what are all the questions or points that I need to raise to the folks in the meeting...
Please advice
regards

Hi
refer to this link below
http://help.sap.com/saphelp_nw04s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
Exactly this will be taken up by BASIS team so that at any time if we have any issues with RFCs like RFC connection failure we will not get any data to our targets.
Then we have to raise ticket to basis stating this failure

Create new file system

When i am trying to create new filesystem with #newfs /dev/rdsk/c0t0d0s4 getting the error message
device busy ,
please help me what to do

The message "device busy" means what it says. Since newfs trashes any data on the device you specify, it is a good thing that this check is made. A typo could a major loss of data without such a safeguard. First, check that you have entered the device name correctly. If it is correct, you can run the format command and select the device in queustion. The format command should report which slices (that is, partitions) on the device are busy and for what. For example:
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <DEFAULT cyl 38307 alt 2 hd 16 sec 255>
/pci@1f,0/pci@1,1/ide@3/dad@0,0
Specify disk (enter its number): 0
selecting c0t0d0
[disk formatted, no defect list found]
Warning: Current Disk has mounted partitions.
/dev/dsk/c0t0d0s0 is in use for live upgrade /. Please see ludelete(1M).
/dev/dsk/c0t0d0s1 is currently used by swap. Please see swap(1M).
/dev/dsk/c0t0d0s4 is in use for live upgrade /var. Please see ludelete(1M).
/dev/dsk/c0t0d0s5 is part of active ZFS pool z. Please see zpool(1M).
/dev/dsk/c0t0d0s6 is currently mounted on /. Please see umount(1M).
/dev/dsk/c0t0d0s7 is currently mounted on /var. Please see umount(1M).
(the menu appears here)
As you can see, this disk has several slices (partitions) in use for various purposes. This command should give you the information you need. This is the most generic way I know of obtaining this information; otherwise, you'd have to search for the device using commands like df, mount, swap, metastat, metadb, etc.

Eror Creating New Technical System in portal(SLD)

Hi creating SLD through Techinal system(in portal).When i click to register Message server to enter message server name and port ,it is displaying a below error:-
Please help me out
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   com.sap.tc.webdynpro.progmodel.context.ContextException: Node(TechnicalSystemDetailView.ABAPSystemDetail.MessageServer.LogonGroups): cannot bind or add elements because the node has no valid parent
    at com.sap.tc.webdynpro.progmodel.context.Node.prepareAddElement(Node.java:656)
    at com.sap.tc.webdynpro.progmodel.context.Node.addElement(Node.java:635)
    at com.sap.sld.wd.technicalsystem.TechnicalSystemDetailView.onActionNewLogonGroup(TechnicalSystemDetailView.java:616)
    at com.sap.sld.wd.technicalsystem.wdp.InternalTechnicalSystemDetailView.wdInvokeEventHandler(InternalTechnicalSystemDetailView.java:974)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    ... 28 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type     HTML Client
User agent     Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MS-RTC LM 8; InfoPath.3)
Version     null
DOM version     null
Client Type     msie7
Client Type Profile     ie6
ActiveX     enabled
Cookies     enabled
Frames     enabled
Java Applets     enabled
JavaScript     enabled
Tables     enabled
VB Script     enabled
Server
Web Dynpro Runtime     Vendor: SAP, build ID: 7.0106.20091119084951.0000 (release=NW701_06_REL, buildtime=2010-01-06:15:21:34[UTC], changelist=75637, host=pwdfm246), build date: Mon Jan 10 02:17:55 SGT 2011
J2EE Engine     7.01 PatchLevel 75592.
Java VM     IBM J9 VM, version:2.3, vendor: IBM Corporation
Operating system     AIX, version: 6.1, architecture: ppc64
Session & Other
Session Locale     en_US
Time of Failure     Wed Feb 23 16:53:12 SGT 2011 (Java Time: 1298451192938)
Web Dynpro Code Generation Infos
sap.com/tcsldwd~main
SapDictionaryGenerationCore     7.0103.20081105084127.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:07:33[UTC], changelist=51195, host=PWDFM246.wdf.sap.corp)
SapDictionaryGenerationTemplates     7.0103.20081105084127.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:07:39[UTC], changelist=51195, host=PWDFM246.wdf.sap.corp)
SapGenerationFrameworkCore     7.0103.20081105084147.0000 (release=NW701_03_REL, buildtime=2008-12-07:12:57:57[UTC], changelist=51200, host=PWDFM246.wdf.sap.corp)
SapIdeWebDynproCheckLayer     7.0103.20081105084705.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:12:47[UTC], changelist=51248, host=PWDFM246.wdf.sap.corp)
SapMetamodelCommon     7.0103.20081105084336.0000 (release=NW701_03_REL, buildtime=2008-12-07:12:58:37[UTC], changelist=51222, host=PWDFM246.wdf.sap.corp)
SapMetamodelCore     7.0103.20081105084336.0000 (release=NW701_03_REL, buildtime=2008-12-07:12:58:33[UTC], changelist=51222, host=PWDFM246.wdf.sap.corp)
SapMetamodelDictionary     7.0103.20081105084131.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:05:17[UTC], changelist=51196, host=PWDFM246.wdf.sap.corp)
SapMetamodelWebDynpro     7.0103.20081105084716.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:09:57[UTC], changelist=51249, host=PWDFM246.wdf.sap.corp)
SapWebDynproGenerationCTemplates     7.0103.20081111115141.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:20:57[UTC], changelist=51958, host=pwdfm246)
SapWebDynproGenerationCore     7.0103.20081105084705.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:12:51[UTC], changelist=51248, host=PWDFM246.wdf.sap.corp)
SapWebDynproGenerationTemplates     7.0103.20081111115141.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:20:57[UTC], changelist=51958, host=pwdfm246)
sap.com/tcsldwd~landscape
SapDictionaryGenerationCore     7.0103.20081105084127.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:07:33[UTC], changelist=51195, host=PWDFM246.wdf.sap.corp)
SapDictionaryGenerationTemplates     7.0103.20081105084127.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:07:39[UTC], changelist=51195, host=PWDFM246.wdf.sap.corp)
SapGenerationFrameworkCore     7.0103.20081105084147.0000 (release=NW701_03_REL, buildtime=2008-12-07:12:57:57[UTC], changelist=51200, host=PWDFM246.wdf.sap.corp)
SapIdeWebDynproCheckLayer     7.0103.20081105084705.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:12:47[UTC], changelist=51248, host=PWDFM246.wdf.sap.corp)
SapMetamodelCommon     7.0103.20081105084336.0000 (release=NW701_03_REL, buildtime=2008-12-07:12:58:37[UTC], changelist=51222, host=PWDFM246.wdf.sap.corp)
SapMetamodelCore     7.0103.20081105084336.0000 (release=NW701_03_REL, buildtime=2008-12-07:12:58:33[UTC], changelist=51222, host=PWDFM246.wdf.sap.corp)
SapMetamodelDictionary     7.0103.20081105084131.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:05:17[UTC], changelist=51196, host=PWDFM246.wdf.sap.corp)
SapMetamodelWebDynpro     7.0103.20081105084716.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:09:57[UTC], changelist=51249, host=PWDFM246.wdf.sap.corp)
SapWebDynproGenerationCTemplates     7.0103.20081111115141.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:20:57[UTC], changelist=51958, host=pwdfm246)
SapWebDynproGenerationCore     7.0103.20081105084705.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:12:51[UTC], changelist=51248, host=PWDFM246.wdf.sap.corp)
SapWebDynproGenerationTemplates     7.0103.20081111115141.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:20:57[UTC], changelist=51958, host=pwdfm246)
sap.com/tcsldwd~technicalsystem
SapDictionaryGenerationCore     7.0103.20081105084127.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:07:33[UTC], changelist=51195, host=PWDFM246.wdf.sap.corp)
SapDictionaryGenerationTemplates     7.0103.20081105084127.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:07:39[UTC], changelist=51195, host=PWDFM246.wdf.sap.corp)

Will suggest opening an OSS message.
Nikhil

B1if BizSteps that create new systems in SLD

Hi,
I want to create scenario that creates new updates system in SLD. I read in documentation that using B1if API new jobs can be added to JobCreator and JobExecutor. Is there any help or tutorial that shows how to create job step by step and use them to create, update or delete systems in SLD?
Regards
Szymon

As per my understand, when you create a new company, you have to undergo upgrade SAP Server procedure, at this time SDL of your new company is created.
IF you are talking about document like B1PO to B1SO, then you have to refer other document.
Thanks
Kevin

How to create new Partner Numbers for WE20?

Hello colleagues!
While creating new Source System for R/3 system in automatic mode providing existing RFC (SM59), system errored with message E0552 "Error during insert in port table".
I tried creating new Partner Profile "FI5FIN100D" in WE20 (partner type=LS of course) by copying existing "FI2FIN200D" partner profile (LOGICAL SYSTEM also), but I received error:
==================
Enter a permissible partner number
Message no. E0342
Diagnosis
The partner number 'FI5FIN100D' does not exist for the partner type 'LS'.
Procedure
Enter a valid partner number and make sure that this partner number exists for the partner type
===================
Where do I create this in BW? I tried WEDI but I received error:
=========
Transaction WEDI is an area menu and cannot be executed
Message no. OZ037
=========
I have SAP BW 3.0b, SP 26, Basis/Abap SP 48.
Can somebody help please?
Thank you in advance.
Mario Vallejo.

Hi Mario,
       In Partner Feild u have give the Logical System Name i.e particular to the client which is already create in SALE Transaction.It is taken by Basis People i think.I think it is already created .give that Logical sytem name in Partner Number.
For ex Partner Number: LGS100(This is created in SALE
                              Tr and assign it to
                              client i.e like 100 or 200)
       Partner Type : LS
     In PostProcessing Tab
         Type : 'US' or 'o'(depending on client)
        Agent : Randomly it (Generates)creates Number
        Lang : EN
Hope This Help
Sreeni

SLD-Bridge / Data Supplier Bridge and new technical systems

Hi,
The data supplier (data collection process) periodically sends data to the SLD bridge. This SLD bridge provides this information to the SLD.
My question: Will new technical systems be created(!) and updated automatically in the SLD by using SLD bridge??
Or do I have to create new technical systems allways manually by SLD browser??
Thanks and regards!

How about the "creation" process of technical systems??
I am confused of the idea of the SLD bridge. The idea sounds great to me, but how is the link between the technical systems and all these collected data passed to the SLD realized??
The online documentation is not very helpful...

Designer create new ER-Model

Hi,
I think it is really a simple question. When I create a new ER-Diagram I have to set the default container for this diagram.how can I do so?
If I try to create an application system container the name is "new application system" under global shared workarea. I cannot write a new or other name and then I cannot usethis container.
Please help me.
Regards
Siegwin

No, don't make your repository versioned just to solve this problem. You should be able to create new application systems in GLOBAL_SHARED_WORKAREA and give them pretty much any name you want, without turning on versioning, and if you can't, versioning is not likely to be the problem. In fact, versioning causes more problems than it solves.
So you've tried creating a new application system with the Repository Object Navigator (RON), and it won't let you name it and save it with the new name? Is that a good description of the problem?
I'm guessing that this is a brand new repository, right?
Have you checked the repository with the Repository Administration Utility (RAU) to make sure that it has been installed correctly? To do this, press the button labeled "View Objects" and search for missing or invalid objects.
Have you created a user other than the repository owner for doing your day to day work with Designer, and used RAU to grant that user authority to manage containers? Do this by pressing the Manage Users button in RAU. The user will need to have been created in the database with a "CREATE USER" command first. It is NOT a good idea to log into any tool except RAU as the owner of the repository.

Create new BW System in EP

Similar Messages

Maybe you are looking for