CREATE NEW CLIENT

I have loaded ECC6 in my system.
I want to create new clients.
I created in SCC4 and and tried to log in through the SAP* password PASS.
But failed.
how it is possible please reply.

Hi,
Once you have created the new client in SCC4:
- Goto transaction rz10
- From the drop down select the instance profile <SID>_DVEBMSG<NR>_<hostname>
- Select extended maintanence
- Add new parameter login/no_automatic_user_sapstar and set it to 0
- Save the changed profile
- Make sure to activate the new profile
- Restart SAP system
- login to the new client via SAP*/pass
Regards,
Srikishan

Similar Messages

Error while creating new client

Hi,
recently i installed sap 4.7 in my system .
to create new client i copy the standard one and i assigned password .
While i am trying to login in to new client i am getting error "password is not right even though it is passsword given while creating new one.
can any explian me how to resolve this
regards
babu

Hi. welcome.
dont worry. cool.
some times due to eror uploads in data base theese type of error happens. put a mail to basis people of your company. they will solve ur issue/
thanks
karthik

How to create new client in XI

Hi all,
Can any one guide me how to create new client in XI.

Hi
To set up a new client, follow these steps
1) Create a client going in to the path
Tools->Administration ->Administration -> Client administration -> Client maintenance
or can also use TCODE scc4
2)Login into the client with
User: DDIC or SAP*
Password
For default password go thru this link
http://help.sap.com/saphelp_nw04/helpdata/en/52/67179f439b11d1896f0000e8322d00/content.htm
Regards
Arpit Seth

"How to create new client in ABAP sneek Preview "

HI ,
Can anybody tell me how to create new client in ABAP sneek preview , i had create a new client 100 and tried to enter with Cilent 100. User : SAP* , and Password : pass. But i'm unable to log into the sap system.

Hello,
perhaps this will help you --> <a href="http://www.sap-img.com/bc049.htm">instructions</a>
And this quote from another thread:
in SAPNW2004sSneakPreviewABAP this procedure only works if the system profile parameter login/no_automatic_user_sapstar is set to 0 (and the system restarted after that), otherwise you will have a new client without any user thus useless ;-).
Regards,
Norman

Problem Creating New Client in SAP NW2004s ABAP+JAVA LINUX

Hi,
I installed successfully NW2004s dual stack on linux vmware (SUSE10 enterprise server). This stack give me two client by default, 000 and 001. System gives me default user sap* and password: sapn4sadm
I want to implement the process for BW enabling, and I want to create New Client for it. I have been used SCC4 to create a new client by logging on with the Client 000, but the problem start, when I log-on with the new client.
Client: 002
User: sap*
Password: pass
I have tried system default password of sap* , but that also dosen't help.
It doesn't work, I also try RZ10 to change the value of login/no_automatic_user_sapstar = 0, but I don't find any profile , when I click on the profile field, i get the message "Profile not found". I am not figuring out where I am doing wrong.
How can I success to create a new Client in which i could log on with sap* user. Please Help me
All yours help would be highly rewarded.
Obaid.

In order to edit profiles In RZ10, you must first import them.
Menu: Utilities --> Import Profiles --> Of Active Servers
After this you can add your parameter.
One alternative is to edit the profile directly with vi, restart the system, do all client copy tasks, remove the parameter with vi, restart the system again and then import the active profiles.
the profiles are located in directory
/usr/sap/<SID>/SYS/profile
and the filename is something like this
<SID>_DVEBMGS<instancenr>_<hostname>

Creating new client (via SCC4) doesn't create defualt users (SAP*,DDIC,...)

I've created a new client (100) via SCC4. After this, I've tried to login at this client with SAP* user and password PASS (i've also tested with the password that i've changed at installation). The message that the system displays is "Name or password is incorrect". I've been querying the SAP table USR01 and the user is not created for this client (only for clients 000, 001 and 066). What can I do to login at the system with client 100?

Hi Raphael,
Thanks for choosing the SRM forum for this question. But Netweaver or Web Application Platform would be more appropriate for this question. You can also look for SAP Notes in the BC-CTS-CCO area. See if Note 41839 helps.
Kind Regards, Suresh.

How to create new client in SAP IDES

Hi Experts,
          I have messed up with the existing 800 client in some configuration, Now i want to create a new client and want to set the configurations again, And which client we have to copy 000 or 800, because i did lot of configurations in 800 client. All my transports in 800 client are not released, if i copy 800 client will the old settings done in client 800 will be copied.
          For basis questions, where i have to post in SDN, because i did not find any section like SAP-Basis, suggest me where i have to post.
          Give me some suggestions on this.
Thanks & Regards,
Ravi.

You Need to do something like this .
Logon to the system
start Transaction SM31
Enter 'T000' as the table name
create a new entry with your preferred client number
logg off the system
Start a new gui logging on to the new client with user
'SAP*' and password 'pass'
Start transaction 'SCCL'
Use client 000 as source and your new client as target
give it the 'go'
wait some time
You can also do all these steps through the menu:
Tools
Administration
Administration
Client Administration
Client Copy
Local Copy
Hope this helps...
Abhinab Mishra

Creating NEW CLIENT,USER and PASSWORD Please

Hi ..
I am having this problem ,I am from SD-module. I am trying to work with sending and receiving IDOC's . Here i have problem with creating another logical system.could u please assist me in creating another client/user/password on my existed system.so that i can be able to send an idoc from one logical system to another logical system.i would appreciate your efforts.
regards,
SURIYA.

Hi
You can create a client using transaction code SCC4. Then you need to perform a client copy, use transcation SCCL to perform a local client copy from client 000 using SAP_ALL/SAP_CUST profile.
Once you are done with you need to check whether the parameter login/no_automatic_user_sapstar is set to false (0). This can be achived in transaction code RZ10. You will have to restart the SAP server if the parameter value is altered(if not already 0).
Once the parameter is set then u can login to the client using user SAP* and password "pass". For performing client copy u will log into the destination client that is the client newly created and using SCCL perform the client copy.
Using BD54 u can create a logical system and in transaction SCC4 you can assign this logical system to the new client.
Once you are done with client copy then DDIC user will also be there with the master password given during installation time.
Using transaction SU01 you can create new users according to ur need and assign the roles/profiles as required.
Once this is done you can peform the IDOC sending and recieveing activity in between those clients.
If any more queries feel free to ask.
Regards
Sumit Jain
[reward with points if the answer is useful]

How to create new client

can anybody tell me to create a new client at present i have 111,222,333 but i need 000 also.
send me the comfiguration steps

Hi Kishore,
       Try the following transactions which are quite helpful in all aspects of client copy functionalities.
SCC1     Client Copy - Special Selections
SCC3     Client Copy Log
SCC4     Client Administration
SCC5     Delete Client
SCC7     Post-Client Import Methods
SCC8     Client Export
SCC9     Remote Client Copy
SCCL     Local Client Copy
Hope it helps.
Rgds,
Aram K.

FLVPlayback creates new client

My application has alot of media in it and I'm using the
FLVPlayback component to play my video because it has a way of
adding cuepoints using AS.
GHowever, whenever I uise FLVPlayback to view a stream from
FMS2, the component uses a new connection and often does not close
the connection when navigating away from the page.
So... I have a single user running an application which is
creating 10+ clients on FMS2. As FMS2 has limited simultaneous
clients, this is very unsatisfactory.
Am I doing something wrong? Otherwise I will need to ditch
the component and create my own Video, NetConnection and NetStream
objects and playback media that way.

Dear Bernie,
Thanks for ur support.
=====================================
during this i have some dump error while i creating and checking RFC ..
so i raise the ticket in SAP and apply
NOTE_0001042815
now all my problem solved. ( all data related to DEV automatically updated the datas )
but i have SLD updatation problem still .
The definiation of job LANDSCAPE FETCH is incomplete. Operation is not possible."
i check with sm37. it is scheduled . not able to release. it show above error.

Create new client in Solution Manager?

I finished installing Solution Manager 4.0 sp1 for the first time and have the default clients of 000, 001, and 066. I can log on with the SAP* user. I'm a little confused about the next step. Do I create an addtional client (For example, 100) just like a production or development system to use for users, RFC connections, etc.?
Or do I use one of the default clients?

Hi Carl,
As always... the golden rule applies to SOLMAN as well. Never touch the default clients. Have a client copy and then perfrom all the actions from and ON the Copied client. Get going with SCC4 for a new SOLMAN client :).. atleast thats what we follow here as a practice.
All thebest
Br,
Sri
Award points for helpful answers

Create new system and client with TDMS

Hi all;
I am tested the TDMS product with good results. I want create a new system and do one copy with time reduction time for new development system
What it´s the best solution?
- Install new system and do the client copy with TDMS
or
- System copy of production system, delete production client, create new client with UCUSV of productive system and copy client with TDMS?
Thanks a lot

Hi;
It´s true :).
Ok, one example, I have two systems, I want create system shell from A (client 900) to B . The central system is C
In system B I don´t have any client but the Cross is diferent to system A
I select in TDMS - ERP Shell Creation Package for SAP Release higher 4.6C
System Definition;
- Control system - C (all information it´s correct)
- Sender system - A (Client 900)
But i dont have any information about the receive system (A).
When execute the synchronization appears the system A, but with any information (destination ID)
and I have the error: Could not change password of RFC Destination sender system
Any Idea
thanks a lot for the help

How to create a new client in SAP?

Hi Experts,
In my SAP system client 800 is already exists.And I want to practice ALE I need another client.So can exactly tell me steps to create new client?

You can create a new local client by copying exsisting client through SCCL
Please go through the required client copy documentation if you are on project
and also refer to required SAP OSS Notes
Few relate T.Codes are:
SCC1 Client Copy - Special Selections
SCC3 Client Copy Log
SCC4 Client Administration
SCC5 Delete Client
SCC7 Post-Client Import Methods
SCC8 Client Export
SCC9 Remote Client Copy
SCCL Local Client Copy
Reward Points if uesful.

Creating a new client

Hi guru
How create a new client similar to client000.
Points will be rewarded for the responses.
Thanks in advance
Vijay.

Hi,
pl check this
[New client|http://www.sap-img.com/bc049.htm]
[To create new client|http://listserv.sap.com/pipermail/linux.general/2002-April/002281.html]
regards
sadhu kishore

Default sap* password for new client copy ?

Hi Basis Expert,
What is the default password for sap*, i have create new client with SCC4 and i tried to login but failed.
please advise what is the default password for sap*.
i am using Netweaver 7.0 SP16.
Thank you and best regards
Fernand

Hi!
If you followed the procedure, you should have set the profile parameter login/no_automatic_user_sapstar to 0 and restarted application server. After that you can login using SAP* and password PASS.

CREATE NEW CLIENT

Similar Messages

Maybe you are looking for