Create new column in BI Admin Tool being HFM the OBIEE data source.
Hi all,
I am developing a BI project using OBIEE 11g 11.1.6.4 and HFM 11.1.2.1. HFM is the data source for OBIEE.
Having the metadata imported in the physical and in the BMM layers, what I want to do is create a new column that will contain a float value. This float value depends on Account dimension, that is, if account name is 'XYZ', in a join of all dimensions, this new column´s value should be the same for all the other accounts in the same join.
I have reached a point that the new column created shows the same number (value) as the logical column 'value' of the fact table, but I don´t know how or where specify which value (the one of the account name 'XYZ') should be for the rest of the new column (where account name is not equal to 'XYZ').
I hope it is understandable, if something is not clear, please ask me.
Thanks in advance.
Best regards,
Borja
Hi,
yeah when i put * in the set online filter i am able to see the users which i have created in weblogic. After all the users appear then i select Action-> close. Now again when i try to cross check it once again i again clicked on manage->indentity->now i dont see the users. what could be the issue?
Thanks,
RM
Similar Messages
-
How to create New columns for the Internal Table Dynamically?
HI Guys,
In my logic i have to create new columns depending on the logic which i am executing.
My requirement is .I have to display o/p like this
Material || Year || Period || Mix ratio || Vendor ||Mix Ratio || Vendor || Mix Ratio Vendor || Mix ratio || Vendor || Mix ratio.............................from table's CKMLMV003 and CKMLMV001.Her i have to display the o/p in the above format and i have to display Vendor and Mix Ratio for 5 columns irrespective of data .If i have more than 5 columns for any record then i have to create a New columns dynamically for Vendor and Mix ratio.If anybody want my code i can Submit But plz tell with example how to do?
<b>The O/P must be finally shown in ALV Grid</b>
Thanks,
GopiYou must create the entire internal table dynamically, you can not add columns to a statically define internal table. Here is an example of creating a dynamic internal table.
Creation of internal table dynamically based on the Date Range entered
Regards,
Rich Heilman -
This pop up has been occurring about once a minute when I am on certain sites.
This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?
How do I get it to stop?-> Tap ALT key or press F10 to show the Menu Bar
-> go to Help Menu -> select "Restart with Add-ons Disabled"
Firefox will close then it will open up with just basic Firefox. Now do this:
-> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
-> go to View Menu -> Toolbars -> unselect All Unwanted toolbars
-> go Tools Menu -> Clear Recent History ->'' Time range to clear: '''select EVERYTHING''''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies & Cache''' -> click "Clear Now"
-> go to Tools Menu -> Options -> Content -> place Checkmarks on:
1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
-> go to Tools Menu -> Options -> Privacy -> History section -> Firefox will: select "Use custom settings for history" -> REMOVE Checkmark from "Permanent Private Browsing mode" -> place CHECKMARKS on:
1) Remember my Browsing History 2) Remember Download History 3) Remember Search History 4) Accept Cookies from sites -> select "Exceptions..." button -> Click "Remove All Sites" at the bottom of "Exception - Cookies" window
4a) Accept Third-party Cookies -> under "Keep Until" select "They Expire"
-> go to Tools Menu -> Options -> Security -> place Checkmarks on:
1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
-> Click OK on Options window
-> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select all Unwanted Search Engines and click Remove -> click OK
-> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
You can enable your Known & Trustworthy Add-ons later. Check and tell if its working. -
when navigating on certain sites (fiverr.com is one), i get the popup confirmation "This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?"
this is highly annoying and i can't find a way to turn this annoyance off. help!because of its impact on security this error message cannot be suppressed. you might want to contact the admins of the website where this is occuring and ask them to implement a handling of user input without sending it to a different server...
-
Duplicate of [/questions/860865]
Question
I keep getting this pop-up every few minutes: "This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?" I'm sick of it!!! How can I get rid of it???Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Do a malware check with some malware scanning programs.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
I have cleared my cookies and cache and disabled some add ons, but when in Facebook and specifically for Farmville, I keep getting the pop up box, "This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?" I have closed and opened the browser, too and it still keeps coming up.... Please help!!! Thanks.
You can't avoid that if the website is coded that way and data needs to be send from one server to another server.
-
how do I turn off this notification. I build web stores and this pops up when I access my store now. The stores have a redirect with masking through godaddy.com to hide the source of the store. I have reset fire fox, turned off most of the settings and still having issues. most of the forms on line are outdated.
ThanksThere is a way to turn off the warning for a 307 "temporary" redirect. However, bear in mind that customers will still see it, so you may want to reconsider the design for business reasons.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box that appears above the list, type or paste '''redi''' and pause while the list is filtered
(3) Double-click '''network.http.prompt-temp-redirect''' to switch its value from true (the default) to false.
References:
* [https://support.mozilla.org/en-US/questions/779492 I receive this usually in facebook only. " This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?" How can I stop this?] - related to filtering/protection service
* [https://bugzilla.mozilla.org/show_bug.cgi?id=818850 818850 – The dialog "...new location..." is too annoying and is misleading about the page it comes from] - information about the bug tracking system:
** [https://bugzilla.mozilla.org/page.cgi?id=etiquette.html Bugzilla Etiquette]
** [https://bugzilla.mozilla.org/page.cgi?id=voting.html Voting] -
How to changed old apple ID in AppStore? I've already creat new one's but when I go to the AppStore the old apple ID always appear. Hope you can answer my question. Thanks godbless
No, your accounts will remain separate, any content that you download via either account will be tied to that account - so each account will only be able to authorise its own downloads on your computer's iTunes, redownload them, download updates to its apps, and make in-app purchases in its apps.
Is there are particular reason why you've created a new account ? If it's due to, for example, no longer having access to your old email account then you can update the email address on an account by tapping on the id in Settings > iTunes & App Store and selecting 'view apple id' on the popup and logging into it, via the Store > View Account menu option on a computer's iTunes (click the Edit button to the right of your id at the top of your account's screen), or via http://appleid.apple.com . If you want to re-use the email address on the account that you've just created then you will need to change that first -
This alert pops regularly every 10-15 minutes:
This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?
I did some serious research / checked for viruses / removed and reinstalled Thunderbird and Firefox. Please read this carefully.
1. With Firefox closed (default browser), I can open T-bird without any issues and use it just fine.
but,
2. the minute that I open Firefox, T-bird give me a popup message of: This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location? This is not under the Firefox Browser. It is under the T-bird Tab of my computer.
It does not matter what kind of email you have open, whether it be text or HTML. It pops up.
If I have T-bird open (default email client) and use Chrome or IE with Firefox closed it doesn't happen.
Computer is Windows 7 Pro x64-Bit.This started after the latest Thunderbird update was applied. Like you I have done the same check outs. I found that Thunderbird starts then, without any direct request, FireFox starts as well. Then the messages start popping up. Have already checked and confirmed that the old FireFox posting fixes did not impact the behavior. Looking for an answer.
Same configuration Windows 7 ThinkPad T430. -
In 4.1 BO Client Tools not able to find data source for BVM
Hi All,
In 4.1 BO Client Tools not able to find data source for BVM
Its creating issue .
So if any body have any solution please let me know.
Regards,
Abhishekjava.lang.NoSuchMethodError: org.w3c.dom.Node.getTextContent()Ljava/lang/String;
at customertree.XmlLoader.readData(XmlLoader.java:127)
at customertree.XmlLoader.<init>(XmlLoader.java:69)
at customertree.CustomerTreeFinal.jbInit(CustomerTreeFinal.java:240)
at customertree.CustomerTreeFinal.init(CustomerTreeFinal.java:858)
at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source
at java.lang.Thread.run(Unknown Source)and then inside the code... this is where i get my first error
clients.setRowId(list2.item(i).getTextContent()); -
Creating the text data source for 0OI_LIFNR(TD: Carrier (Number of vendor a
Hi
Have to create the text data source for this characteristic. Basically it is the same as 0Vendor here.
I want to make it delta enabled.
Am creating it on the view BIW_LFA1T(same as 0vendor)
Can anyone advise what can I use to make it delta enabled without any code.
Can I use numeric pointer like the 0Vendor_text.
Many Thanks and regards,
Kate.when defining a data source through the admin web page, don't add '!' in front of the password.
! is needed only when configuring a data source in the mapViewerConfig.xml file. -
My new macbook pro (lion) iCal has been showing the wrong date?
My new macbook pro (lion) iCal has been showing the wrong date for stored events - even though i have put the appointment in on the right date when I look it up a week or so later it has changed?
I think it might be showing 2011 date? How can i fix this and do I have back-up of my original dates?Good to hear . Happy computing!
-
I am a new Logic user. I attempted to download the additional data (roughly 20GB) and for two days my Macbook has been alerting me that there are five seconds left for my download. Ha. I can't quit Logic, or shutdown my computer. Any suggestions?
Sorry for the long subject line. Ha.
-
Mapping tool creates new columns one at a time
Hi All,
I'm using Kodo 3.2.2 with MySql 4.1. I have a fairly large table (over
2million rows) representing one persistent class. I need to add several
new fields to the object, which will require a refresh mapping on the
database to add new columns for the fields.
It seems when I run refresh mapping on the database, Kodo is adding each
new field individually in seperate ALTER TABLE statements, rather than
adding all the columns in one ALTER TABLE statement.
With MySQL and large tables, this can really increase the time required to
refresh the mapping - I've tried with MSSQL and that database must handle
ALTER TABLE commands differently because it doesn't take a fraction of the
time that MySQL takes.
Is this a bug (I doubt it), but rather a feature improvement?
Thoughts?
Thanks,
BrendanThanks Abe for the reply - I've been meaning to look at the process of
creating SQL scripts to perform the refresh mappings on our databases.
I'll have a look at this process before we talk contracting!
Thanks,
Brendan
Abe White wrote:
Unfortunately, we don't have any immediate plans to optimize ALTER TABLEsince
it's not a runtime operation, and as you say most DBs don't have a problemwith
it. Also, note that the documentation shows how to get Kodo to create SQL
scripts rather than directly modify the DB; you could easily edit thescripts
Kodo generates to make them more efficient before piping the SQL to MySQLusing
its client app. (Note that Kodo 3.3 introduces the ability to generate SQL
scripts directly from the mapping tool, rather than having to take an extrastep
through the schema tool).
If getting Kodo to combine ALTER statements is important to you, you couldalso
contact [email protected] about contracting us to expedite this work. -
How to see new user in RPD (Admin tool) 11g
Hi all,
I am trying to create new user in OBIEE 11g. I did everthing from this blog http://varanasisaichand.blogspot.com/2011/03/obiee-11g-security-creating-users-and.html
Why I am not able to se new user in Identitiy in Admin tool? What am I missing.
Thanks
P.S. I found in documentation that "The screenshot below shows the Identity Manager dialog, which enables you to manage users and Application roles." http://docs.oracle.com/cd/E25054_01/bi.1111/e10543/intro.htm (1.6.3 Oracle BI Administration Tool)Hi,
yeah when i put * in the set online filter i am able to see the users which i have created in weblogic. After all the users appear then i select Action-> close. Now again when i try to cross check it once again i again clicked on manage->indentity->now i dont see the users. what could be the issue?
Thanks,
RM
Maybe you are looking for
-
"View in iTunes Store" opens iTunes but does not link to the item.
When I click on a "View in iTunes" link, it redirects and iTunes opens, but only on my Album page. The links do not go to the item mentioned.
-
Hi All, I want to learn BPM. I have some questions. 1. What is BPM? 2. What does BPM in XI? So please send any one proper material to learn BPM. Thanks & Regards, satish.
-
"FOLLOW" Button in hover panel gives an error for Remote Sharepoint Sites
Hi, We have setup Sharepoint 2013 search with different content sources such as file shares and Sharepoint 2010 sites. The FOLLOW button that appears in document hover panels works for all documents present in the sharepoint 2013 farm. However when i
-
Re-organizing all my pictures ... How do I make albums from projects?
I have about 8 different projects that I would like combined into one, but with 8 albums reflecting the pictures that are in the 8 projects ... What's the best way to do this?
-
Green/Red Line Appears on .mov when exporting
Hi, There's a green/red line that appears on the RIGHT SIDE when I export my presentation to QT. I'm using H.264 @ 24fps with Multipass encoding at best quality. I'm not including audio or transparency. The slide size is 355x200. The contents are vec