Create new consolidation of Investment Method (ECCS)

Hi,
Is there any impact if i change the existing method z-419 from periodic reduction to Extra Ordinary Amortization (Goodwill treatment), will it affect other unit using the same method?
Or it is advisable to create a new method that is configured as "Extra Ordinary Amortization" then assign to the consol unit who stopped the GW amortization?
My issue is, one consol unit already stop amortizing the goodwill, am thinking if am gonna change the CoI method or just create a new method.
Please advise.

I dealt this issue.
Thanks.

Similar Messages

ECCS Assign consolidation of investment method to consolidation units

Dear experts,
I get trouble with on error in ECCS. After I create consolidation of investment method. In order to use this method in consolidation of investment, I have to assign this method to consolidation units.
I used tcode CXM1 to assign consolidation of investment method to consolidation units. But when I execute this tcode, there is no consolidation hierarchy. Therefore, I cannot do assignment.
Any body have ever face with the same error?
I am looking forward to hearing your suggestion.
Thanks in advance!

I dealt this issue.
Thanks.

I created new apple id but can't sign in to itunes. It says that your id is not yet loged in so you have to review. In revies it shows payment method in which I provide full info of my visa card but it shows that the pin is incorrect

Hi there,
I created new apple id but can't sign in to itunes. It says that your id is not yet loged in so you have to review. In revies it shows payment method in which I provide full info of my visa card but it shows that the pin is incorrect although the pin is correct. If I try another card no then it shows that your payment method is declined. What should I do?????

Is it asking for a PIN (for a debit card) or the three-digit number on the back of the card (for a credit card)?
Matt

Creating new Employee in ECC

Hi,
i am new to SAP and new to this group also, Can any one help me how to create new employee(HR) in SAP using the BAPIs, after creation of employee how can i check the new employee details in SAP.Can one give me step by step approach to solve this problem.
Thanks in advance.
Thanks & Regards
sushma

Hi,
Welcome to SDN. Please post your question in the correct forum for better replies.
/community [original link is broken]
Regards,
Harini S

Extending VOs with attributes and creating new treetable columns

Hi,
I am relatively new to the ADF scene so please bear with if what I have in my mind is not even possible with ADF. I have searched hi and lo for a solution and now I thoughts it time to ask the community.
Anyways this is what I want to do. I have a simple DB Table that has a hierarchy i.e Trees with roots much like the Employee hierarchy. Except this table has ids for items that come from external systems ( via Web Services in my case ) and / or ids to items in a table that resides in the local schema. So basically this structure table of mine only has relationships and the detail items need to be joined via an association ( in ADF terminology ) in the treetable component somehow.
* Now creating the structure hierarchy is not a big issue. I have that part done already.
* I have the VO from WS ready that gets the items that I might need to show as detail columns in the tree table.
* Querying the local item Detail VO for detail rows might also be not that problematic.
* Merging the above 2 columns to create a consolidated row set is also not that challenging whereby each column header is premapped to internal and external fields. This mapping is configurable to add more fields as required by a user to the treetable.
What I am struggling with is that when I have this merged row set, how will I make it appear on the UI. The treetable seems to utterly not support this i.e. adding new columns at runtime. Following is what I have been able to establish till now.
* The addDynamicAttribute methods on the View Object are not meant for this purpose. While they do add the attributes and you can set and get them after using this method, they do not render and I can't find a way to dynmically rendering them somehow for tree table.
* Looked at the ADF dynamic components. They support only table and page. No go. Or do the whole tree thing somehow in the table component, Will look odd but might still work.
* Looked at this article ( http://one-size-doesnt-fit-all.blogspot.com/2007/05/back-to-programming-programmatic-adf.html ) . I found a comment in the forum regarding this that this might not be all that efficient. Not to mention the fact that it uses the deprecated TreeModels class in 11g.
** Just regarding this apporach what are the new 11g recommended TreeModel classes to be used instead of the deprecated one. I have read the follow-up post but that just points to the location of where the deprecated classes moved to in 11g under the apache contribution. And makes the example work under 11g. What was this TreeModel class replaced with. Anyone knows ?
** How could I access my VO objects in the TreeTableApater ? Can I declare my merged View object wrapped in a TreeItem POJO object. Theoretically it is on the view layer right ?
** If this approach is inefficient has anyone another solution that might work ?
Or just has anyone managed to extend the treetable in any different sort of way. Any tips/help pointers would be deeply appreciated.
Best Regards,

Hi,
So I had some time to look at this problem again. I created a ChildPropertyTreeModel and binded it to my treetable component and moved the generation of the columns to the jspx page. I got it mostly working but the columns generation part mostly escapes me still.
here is how the jspx page looks like that renders the treetable, and which works fine :
<af:treeTable rowBandingInterval="0" id="dynTTbl" var="row" expandAllEnabled="true"
binding="#{backingBeanScope.DynamicTreeTableBB.dynamicTreeTable}"
value="#{backingBeanScope.DynamicTreeTableModel}">
<f:facet name="nodeStamp">
<af:column sortable="false" headerText="Node Stamp" id="c1">
<af:outputText value="#{row.tableColumnVal[0]}" id="ot1"/>
</af:column>
</f:facet>
<af:forEach begin="1" end="2" varStatus="status">
<af:column>
<f:facet name="header">
<af:outputText value="#{status.index}"/>
</f:facet>
<af:inputText value="#{row.tableColumnVal[status.index]}"/>
</af:column>
</af:forEach>
</af:treeTable>
I want the forEach loop to look a bit differently like below :
<af:forEach items="row.tableColumnVal" var="columnVal" varStatus="status">
<af:column>
<f:facet name="header">
<af:outputText value="#{status.index}"/>
</f:facet>
<af:inputText value="#{columnVal}"/>
</af:column>
</af:forEach>
This should work for a list or array but evidently in my case it is not. I have a suspicion that the "items" attribute is unable to recognize the row.tableColumnVal attribute of mine. I have no way of checking this out or finding out if I am doing something wrong.
My sample project can be found here, if anyone quickly wants to run this on Jdev 11g
http://rapidshare.com/files/438880281/TreeTableTest.zip
P.S. I have tried to convert the tableColumnVal attribute to a List an array and a Map. The first forEach syntax works everytime but the second one fails always and I want the second one to work somehow.
Regards,

Consolidation of Investment Task Query -1

Dear Experts,
I have a critical doubt
I have created Cons. Group and Cons Unit as follows
Main Cons Grp
          Sub Cons Group1
                            Cons Unit 1   (Parent Unit) 20% hold on Cons unit 2 (specified in accounting technique as Parent unit)
                            Cons Unit2    (Subsidiary of Cons Unit 1)
          Sub Cons Group 2
                            Cons Unit 3   (Parent Unit) 1000% hold on Cons unit 4 (specified in accounting technique as Parent unit)
                            Cons Unit 4    (Subsidiary of Cons Unit 3)
Kindly tell me
1) This kind of Hirerchy will allow me to do COnsolidation of Investment with Minority Interest Calculation)
Or
2) How do I Investment consolidation in the above scenario?
(If you all can help with details)
Regards
Ritesh M

Ritesh,
Hierarchies in SEM-BCS may have different structure, depending on share of ownership and your purpose.
Your hierarchy:
>
>           Sub Cons Group1
>
>                             Cons Unit 1   (Parent Unit) 20% hold on Cons unit 2 (specified in accounting technique as Parent unit)
>                             Cons Unit2    (Subsidiary of Cons Unit 1)
>
>           Sub Cons Group 2
>
>                             Cons Unit 3   (Parent Unit) 1000% hold on Cons unit 4 (specified in accounting technique as Parent unit)
>                             Cons Unit 4    (Subsidiary of Cons Unit 3)
Answering to your questions is impossible because:
1. 20% ownership usually means not a subsidiary, but an associate company, that is another accounting method.
2. Ownership in 1000% is impossible.

Error while creating new user in Oracle 11i EBS

I am getting following error while creating new user. How solve this issue?
“Unable to load java class % specified profile option SIGNON_PASSWORD_CUSTOM. Please verify that the class exists and that it implements the java interface oracle.apps.fnd.security.PasswordValidation”.

Following is the text from Note for Custom Password Validation logic:
Customers who wish to use their own password validation logic may do
so by writing their own Java classes that implement the
oracle.apps.fnd.security.PasswordValidation Java interface. The
interface requires 3 methods to be implemented:
1) public boolean validate(String user, String password)
    - This method takes a username and password, and then returns true
or false, indicating whether the user's password is valid or invalid,
respectively.
2) public String getErrorStackMessageName()
    - This method returns the name of the message to display when the
user's password is deemed invalid (i.e., the validate() method returns
false).
3) public String getErrorStackApplicationName()
    - This method returns the application shortname for the
aforementioned error message.
After writing the Java class to perform customized password
validation, the customer must then set the value of the profile option
SIGNON_PASSWORD_CUSTOM to be the full name of the class. If, for
example, the name of the Java class is
oracle.apps.fnd.security.AppsPasswordValidation, then the value of the
SIGNON_PASSWORD_CUSTOM profile option must be
oracle.apps.fnd.security.AppsPasswordValidation. Note that AOL/J
will attempt to load this class dynamically. Hence it is necessary to
make the class accessible by AOL/J. This means that in Forms, the
class must first be loaded into the database using the loadjava
command.
You will need to apply the following patches for 11.5.1:
   1344802
   1363919
   1472974
   1351004
   1377615
You will need to apply the following patches for 11.5.2:
   1377615

Apple tech helped me 60 min ago. Told me to create new account for wife. Wiped out her ipod music--now iTunes wont let me download it in her new account so I can restore her music! Help!!

Today an Apple tech helped me 60 min ago. Although my wife and I have diff apple ID's, our music was mixing and syncin back and forth. The tech told me to create new comp user account for wife which I did. I wiped out everything on her ipod and signed in under her ID. When I tried to put it back I got a message that I couldn't download her purchased music for 90 days because there was another apple ID associated with my computer. Not sure wether that means mine or hers. What I am sure of is that I'm dead if I can't get her music back. Please help. Thanks, Craig

I can understand how that would be frustrating. If you created a brand new Apple ID for her, your Apple ID should not have been affected any more than anyone else's. They are as separate from one another as your Apple ID is from mine.
Since you just bought your MacBook Air, you can certainly contact AppleCare for this, and I encourage you to do so. They will straighten it out.
Until then, if you want to troubleshoot this on your own, sign in to your Apple ID here:
https://appleid.apple.com/
Click the blue "Manage your Apple ID" button. If it says it no longer exists or gives you other hassles, it's probably not worth your effort to pursue. Have Apple fix it.
Contact Apple starting with this link - never Google it: http://www.apple.com/support/
Navigate the pages as follows:
Under "Contact Us" click the blue "Contact Support" link
Click the blue "Get Started" button
Click "More Products & Services"
Click "Apple ID"
Click "iTunes Store, App Store or Mac App Store"
Continue with the appropriate options and choose the contact method most convenient for you.

Am being prompted to enter security questions when making a purchase on my new IPad. I don't believe I have ever setup security questions on my apple id. How to I create new security questions?

I am being prompted to enter security questions when making a purchase on my new IPad. I don't believe I have ever setup security questions on my apple id. I have tried logging into my apple id and have chosen the security and priviacy settings to set up security questions. However I am prompted to enter answers to security questions and am told they don't match. How to I create new security questions or reset them?

You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(104011)

New General ledger accounting in ECC 6.0 : Profit centre not in BSID table

hi,
I already create new transaction code and report from standard transaction code
*s_alr_87012168 : Customer Aging Report (Due Date Analysis for Open Items)* and i
also add Profit center fields into Dynamic selection.
My problem is, if i run the report using customer account the output is displayed but
if i run the report with customer & profit centre the output is not displayed. currently i'm using
new General ledger accounting in ECC 6.0 and when i look into bsid table the value
is empty for profit centre and the value for profit centre are stored in new table
FAGLFLEXT.
do i miss something?
thanks.

s_alr_87012168 : Customer Aging Report (Due Date Analysis for Open Items) this is a report generated.

HT204088 Dear sirs, Could you please help me on my problem with my apple ID I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working, My account have 50$ and stil

Dear sirs,
Could you please help me on my problem with my apple ID
I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working,
My account have 50$ and still didn't buy anything

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(100546)

HT2534 My friend created me an itunes store account with his credit card , his credit card is about to expire and they are asking me to re-enter the credit card and security card number .... I don't have these numbers ... How can i create new itunes accou

My friend created me an itunes store account with his credit card , his credit card is about to expire and they are asking me to re-enter the credit card and security card number .... I don't have these numbers ... How can i create new itunes account without credit card?????

Why do you need to create a new account?
Just change the payment method.
http://support.apple.com/kb/ht1918

SSMS crash when creating new database diagram

For several years I have been unable to create database diagrams from within SSMS. I have tried every combination of VS2005, VS2008, VS2012 and VS2013 with every combination of SQL2005, SQL2008, SQL2012 and SQL2014.
I have installed, uninstalled, and repaired many dozens of times. I am currently using VS2013 ultimate with SQL2014 express.
I have tried every related 'workaround' that I can find on the internet. Still the problem persists.
Any help would be deeply appreciated.
Here are the relevant details with file versions:
In SSMS, I right-click on a database and choose New Database Diagram. A Blank diagram window appears with the SSMS error dialog:
===================================
Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Microsoft.VisualStudio.OLE.Interop)
Program Location:
   at Microsoft.VisualStudio.OLE.Interop.IOleCommandTarget.QueryStatus(Guid& pguidCmdGroup, UInt32 cCmds, OLECMD[] prgCmds, IntPtr pCmdText)
   at Microsoft.VisualStudio.Platform.WindowManagement.DocumentObjectSite.QueryStatus(Guid& pguidCmdGroup, UInt32 cCmds, OLECMD[] prgCmds, IntPtr pCmdText)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.QueryStatus(Guid& pguidCmdGroup, UInt32 cCmds, OLECMD[] prgCmds, IntPtr pCmdText)
   at Microsoft.Internal.VisualStudio.Shell.Interop.IVsTrackSelectionExPrivate.Register()
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.ConnectSelectionContext()
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.Activate()
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowManagerService.viewManager_ActiveViewChanged(Object sender, ActiveViewChangedEventArgs e)
   at System.EventHandler`1.Invoke(Object sender, TEventArgs e)
   at Microsoft.VisualStudio.PlatformUI.ExtensionMethods.RaiseEvent[TEventArgs](EventHandler`1 eventHandler, Object source, TEventArgs args)
   at Microsoft.VisualStudio.PlatformUI.Shell.ViewManager.SetActiveView(View view, ActivationType type)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.ShowInternal(ShowFlags showFlags)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.<Show>b__26()
   at Microsoft.VisualStudio.ErrorHandler.CallWithCOMConvention(Func`1 method)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.Show()
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.MarshalingWindowFrame.<Microsoft.VisualStudio.Shell.Interop.IVsWindowFrame.Show>b__7a()
   at Microsoft.VisualStudio.Shell.ThreadHelper.Invoke[TResult](Func`1 method)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.MarshalingWindowFrame.Microsoft.VisualStudio.Shell.Interop.IVsWindowFrame.Show()
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VirtualProject.CreateDesigner(Urn origUrn, DocumentType editorType, DocumentOptions aeOptions, IManagedConnection con, String fileName)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VirtualProject.Microsoft.SqlServer.Management.UI.VSIntegration.Editors.ISqlVirtualProject.CreateDesigner(Urn origUrn, DocumentType editorType, DocumentOptions aeOptions, IManagedConnection
con, String fileName)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.ISqlVirtualProject.CreateDesigner(Urn origUrn, DocumentType editorType, DocumentOptions aeOptions, IManagedConnection con, String fileName)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VsDocumentMenuItem.CreateDesignerWindow(IManagedConnection mc, DocumentOptions options)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VsDocumentMenuItem.InvokeDesigner(IManagedConnection connection)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VsDocumentMenuItem.Invoke()
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ToolsMenuItemBase.MenuInvokedHandler(Object sender, EventArgs args)
Version info taken from Sql Server Management Studio/Help/About dialog:
Microsoft SQL Server Management Studio      12.0.2000.8
Microsoft Analysis Services Client Tools    12.0.2000.8
Microsoft Data Access Components (MDAC)     6.1.7601.17514
Microsoft MSXML                             3.0 4.0 5.0 6.0
Microsoft Internet Explorer                 9.11.9600.17358
Microsoft .NET Framework                    4.0.30319.18444
Operating System                            6.1.7601
DLL versions
c:\Program Files(x86)\Common Files\microsoft shared\Visual Database Tools
dsref80.dll version 12.0.21005.1
c:\Program Files(x86)\Common Files\microsoft shared\MSDesigners8
msdds.dll    12.0.21005.1
msddsf.dll   12.0.21005.1
msddslm.dll 12.0.21005.1
msdds.mp.dll 12.0.21005.1
msddsp.dll   12.0.21005.1
c:\Program Files(x86)\Common Files\microsoft shared\MSDesigners8\Resources\1033
msddsui.dll 12.0.21005.1

Hello,
There is a Connect item related to this issue. This is the link of that Connect item:
https://connect.microsoft.com/SQLServer/feedback/details/730985/smss-crashes-when-creating-new-database-diagram
Try the workarounds posted there (Workarounds section).
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Creating new user in enterprise portal 7 .0

Hi,
I have installed enterprise portal 7.0 and backend is ECC 6.0 on windows 2003.i have logged with J2EE_ADMIN user.when i am trying to create new user in EP7.0 ,i got this problem.(an error occured,contact system administrator).please help me.

Hi,
Go to http://<server>:5<instance no>00
Click on User Management. After login, go to Configuration tab and there you can check.
Thanks
Sunny

Error while creating New member in Dimension

I am trying to create new members in the essbase Outline. I get the following error.
Do i need to create the rule file for this ?
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 61, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Invalid value specified [RULES_FILE] for Load option [null]
     at com.hyperion.odi.essbase.ODIEssbaseMetaWriter.validateLoadOptions(Unknown Source)
     at com.hyperion.odi.essbase.AbstractEssbaseWriter.beginLoad(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
     at org.python.pycode._pyx7.f$0(<string>:61)
     at org.python.pycode._pyx7.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java)
     at org.python.core.PyCode.call(PyCode.java)
     at org.python.core.Py.runCode(Py.java)
     at org.python.core.Py.exec(Py.java)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.h.y(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Invalid value specified [RULES_FILE] for Load option [null]
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.h.y(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)

Following is the text from Note for Custom Password Validation logic:
Customers who wish to use their own password validation logic may do
so by writing their own Java classes that implement the
oracle.apps.fnd.security.PasswordValidation Java interface. The
interface requires 3 methods to be implemented:
1) public boolean validate(String user, String password)
    - This method takes a username and password, and then returns true
or false, indicating whether the user's password is valid or invalid,
respectively.
2) public String getErrorStackMessageName()
    - This method returns the name of the message to display when the
user's password is deemed invalid (i.e., the validate() method returns
false).
3) public String getErrorStackApplicationName()
    - This method returns the application shortname for the
aforementioned error message.
After writing the Java class to perform customized password
validation, the customer must then set the value of the profile option
SIGNON_PASSWORD_CUSTOM to be the full name of the class. If, for
example, the name of the Java class is
oracle.apps.fnd.security.AppsPasswordValidation, then the value of the
SIGNON_PASSWORD_CUSTOM profile option must be
oracle.apps.fnd.security.AppsPasswordValidation. Note that AOL/J
will attempt to load this class dynamically. Hence it is necessary to
make the class accessible by AOL/J. This means that in Forms, the
class must first be loaded into the database using the loadjava
command.
You will need to apply the following patches for 11.5.1:
   1344802
   1363919
   1472974
   1351004
   1377615
You will need to apply the following patches for 11.5.2:
   1377615

Create new consolidation of Investment Method (ECCS)

Similar Messages

Maybe you are looking for