Create New Custom PPF Action

I need to create my own PPF action, but I don't know if I need to create it at the Action Definition level or if I need a new Action Profile and then a new Definition.  I have a theory as to why you would create a new profile but I can't confirm.  Can someone confirm or correct me please? 
My theory is:
1.  The application key is at the Profile level so if you require a different key you need a new Profile, and
2.  The application object passed into the custom method is defined in the "object type" at the Action Profile level also. 
So, if you require different information passed into your method or a different key than the existing Actions allow, you need to create your own new profile.
Is this correct?  Also, any documentation you can point me to on this topic will be greatly appreciated.
Thanks,
Mike

Hi user;
how to Create New Custom Schema.. like apps in EBS 11i..Please check below thread's mention note&advice etc.
custom Schema-r11
Re: REG:creation custom schema
Regard
Helios

Similar Messages

  • How to create new Custom XML Report without using Form Builder

    Hi,
    What are the steps to create new Custom XML Report without using Report Builder ?
    Thanks and Regards,
    Abhi

    Hi,
    Steps we now follow
    1)Create Data Model in Reports Builder
    2)Create xml
    3)Insert xml in Publisher to build Fomat
    4)FTp rdf
    5)Create Data Definition and Template
    6)Create executable and Concurrent Program
    Is there any way we can build reports without use of Report Builder ? By writing PL SQL Package for Before Report and After Report etc ...
    Thanks and Regards,
    Abhijit Rode

  • AR: Error Creating new Customer

    Hello,
    I am having error the following error creating new customer in AR 12.1.1 "Invalid value for currency_code. Please enter currency_code value from fnd_currencies". The currencies are all enabled.
    Thanks,

    Please see these docs.
    Cannot Add Customers. Error: Invalid Value For Currency_code. [ID 554555.1]
    CUSTOMER INTERFACE STATUS ERROR CODES [ID 1073634.6]
    Resource Addresses and Subinventory Assignment Fails with APP-295320: Provide a positive integer [ID 986655.1]
    Thanks,
    Hussein

  • Create new, custom transitions?

    Hi all! I'm working on possibly replacing FCP X in my workflow. One of the great things about FCPX and Motion was that I could create my own transitions using Motion and "placeholder" footage, then easily load them as new transition effects in an FCP X project. I have a series of light leak transitions that were basically a dissolve between A and B, with the light leak/bokeh footage overlaid with Add blend mode. While I know I can just place the footage over the edit points on the timeline, it would be much easier and cleaner to simply apply these as transitions instead.
    Is it possible to create my own custom transitions with Premiere or After Effects, that can be applied as transition effects directly to clips on the timeline?

    Hi user;
    how to Create New Custom Schema.. like apps in EBS 11i..Please check below thread's mention note&advice etc.
    custom Schema-r11
    Re: REG:creation custom schema
    Regard
    Helios

  • Create New Custom Schema..

    HI,
    how to Create New Custom Schema.. like apps in EBS 11i..
    thnaks

    Hi user;
    how to Create New Custom Schema.. like apps in EBS 11i..Please check below thread's mention note&advice etc.
    custom Schema-r11
    Re: REG:creation custom schema
    Regard
    Helios

  • Create new Customer pricing group

    Hi,
    How to create new customer pricing group in Development server & Transport to Quality Server & then Production.

    Hi
    If you are refering the Pricing group field in the Customer Master, it is available in Customer Master Sales Area Data Sales screen.
    It can be configured via IMG - Sales & Dist - Basic Functions - Pricing - Maintain Price Relevant Master Data Fields - Define Pricing Groups for Customers. Transport methodology is via transports to other environments.
    Regards
    Nara

  • CHARM:Urgnt Corr. type of doc isnt created using Custom "Authorize" Action

    Hi Experts,
    I have copied SDCR Action profile to YDCR and defined all scheduled conditions as default. I have assigned YDCR action profile to my Txn Type YDCR. However, when I am trying to create Urngt type of correction using custom "Authorize" action from the action button, system is changing the status to "Authorized" However, the followup document of urgnt correction is not being corrected though I have selected the "Urgnt Correction (Maintenance)" from the Subject line.
    I have properly copied all the copy rules and working fine if I use SDCR action profile instead of YDCR.
    May any one please help me diagnose and solve this problem?
    Regards,
    Faisal

    Hi All,
    I want to share the latest on this.
    I had basically created new schedule conditions by copying the original ones. Below are mentioned schedule conditions I copied from original:
    Original schedule condition name : Only Status 'To be approved' (Assigned to Authorize and Reject Change Request)
    Custom schedule condition name: YOnly Status 'To be approved'
    The above YOnly Status 'To be approved'  was assigned to "Authorize Change Request" and "Reject Change Request" actions in my YDCR Action Profile.
    But When I changed it to Only Status 'To be approved' and created the urgnt correction, this type is created.
    Can any one tell me what could have happened?
    Regards

  • Error while creating new customer(xd01)

    following error ocurred while crating new customer.It wasnt case when i created customer before for the S/Org....
    "Communication error with external tax system(Vertex_MS0018)"
    Msg No TAX_TXJCD864)
    Pls help..
    thanks
    Amol

    Hi Amol,
    One user faced the same issue on IT tool forum, check the link for solution.
    http://sap.ittoolbox.com/groups/technical-functional/sap-crm/communication-error-with-the-external-tax-systemvertex_ms0018-909264
    Hope it helps,
    Regards,
    MT

  • Can we create new customer site for existing customers using custm interfc

    Hi ,
    I have a requirement :
    version -- R12 .
    We need to add new customer site for existing customers , is it possible to create it through customer interface with insert_update_flag set as U / I .
    Any help in this is grate .
    regards ,
    Azzu .

    I am pretty sure I've done this on one of my past project..
    why don't you try it out?
    Another route would be use customer APIs (TCA APIs)...which I am sure can achieve what you're looking for.
    Edited by: James Kim on Mar 17, 2010 2:48 PM

  • Error creating new Customer Equipment Cards

    Dear experts,
    I am getting the following error when creating a new Customer Equipment Card:
    This entry already exists in the following tables  'Customer Equipment Card' (OINS) (ODBC -2035)  [Message 131-183]
    I cannot find out what is causing this!
    SAP B1 version is 8.81 PL07;
    Any help please?
    Victor

    Dear Victor,
    It could be by bug. In general, the NextNumber in NNM1 for this object is already used. You need to find SAP or partner support to solve the issue.
    Thanks,
    Gordon

  • Create new customer using BAPI BAPI_CUSTOMER_CREATEFROMDATA1

    Hi There,
    I am trying to create a new customer in SAP through BAPI for demo purpose. The BAPI function I used is BAPI_CUSTOMER_CREATEFROMDATA1. However, the BAPI call requires a reference customer. How can I find a valid reference customer in SAP? Furthermore, is it correct at all to use this BAPI function to create a new customer? Is there any other BAPI function that I can use to do the same stuff? Thanks a lot in advance for your help!
    Thanks,
    Lei

    Hi,
    I didn't get which system of SAP are you refering to , but as this forum is for CRM i assume that you want to create customer in CRM.
    So for creating a customer in CRM you can use the BAPI,
    BAPI_BUPA_CREATE_FROM_DATA
    and for getting the reference customer jsut execute the following FM in test enviroment to get the Business Partner no and Business Partner GUID.
    CRM_BUPA_CONSUMER_GET_REFERENC
    Hope this helps.
    Regards
    Sidd

  • Custom PPF Actions using Methods

    (I am working in EWM but I imagine the answer would be the same for CRM or APO.)
    Are all active action definitions which use methods evaluated in the PPF schedule condition analysis to determine if they should be triggered?  While I haven't tried it, in debug it appears I could have placed my new action definition in any of the PPF action areas and it would have been "picked up".

    Hi,
    I did not get your question completely,but if you need a new action to be triggered ,you can do that by defining an new action and implementation for the PPF badi with a new class where you can write your own code.
    Hope this helps,
    Santosh

  • Can't create new file automator action

    I'm trying to create a new Automator action that prompts the user to choose a new file. The Action is similar to the "Ask for Finder Items" actions except that it asks the user to choose a new file and not one that already exists.
    I chose to write it in applescript:
    script PicknewFile
    property parent : class "AMBundleAction"
    on runWithInputfromAction_error(input, anAction, errorRef)
    return choose file with prompt "Where do you want to save it?"
    end runWithInputfromAction_error
    end script
    When I try and run it, I get the following error message in the Xcode console.
    [Switching to process 10606]
    Program received signal: “EXCBADACCESS”.
    [Switching to process 10606]
    sharedlibrary apply-load-rules all
    No memory available to program now: unsafe to call malloc
    Data Formatters temporarily unavailable, will re-try after a 'continue'. (Not safe to call dlopen at this time.)
    kill
    Does anybody know when this happens?
    Thanks,
    Scott

    Looks like I was wrong. I created a brand new project in Xcode and all I did as add "choose file name" to the applescript. It still gets a "EXCBADACCESS". I also tried a 'display dialog "Error"' in my applescript and it does the same thing.
    Here is the script the fails. Everything else in the project is default.
    script ChoosenewFile
    property parent : class "AMBundleAction"
    on runWithInputfromAction_error(input, anAction, errorRef)
    -- Add your code here, returning the data to be passed to the next action.
    display dialog "Error"
    return input
    end runWithInputfromAction_error
    end script
    In the debugger, this is the stack:
    #0 0x91184917 in objc_msgSend
    #1 0x63707472 in ??
    #2 0x16c01e36 in DecodeAEDescInternal
    #3 0x16c02b4b in DecodeObjectSpecifier
    #4 0x16c01c24 in DecodeAEDescInternal
    #5 0x16c022bb in DecodeAEList
    #6 0x16bccdd0 in ASExecuteEvent_PushSendStackFrame
    #7 0x16bccfcc in ASExecuteEvent
    #8 0x918026cb in callComponent_4444
    #9 0x16bc3d4a in AppleScriptComponent
    #10 0x917efcb6 in CallComponentDispatch
    #11 0x972455df in OSAExecuteEvent
    #12 0x00339ffe in +[BAObjectProto invokeScriptHandler:forObject:args:error:]
    #13 0x0033a363 in -[BAObjectProto invokeScriptHandler:args:error:]
    #14 0x0033b581 in -[BAObjectProto forwardInvocation:]
    #15 0x92f760c4 in __forwarding__
    #16 0x92f75bf2 in _forwarding_prep_0__
    #17 0x000718af in -[AMAction runWithInput:loopParent:]
    #18 0x00070d2f in -[AMWorkflowRunner runAction:withInput:loopParent:]
    #19 0x000c60a8 in -[AMWorkflowRunner runAction:]
    #20 0x0013261d in -[AMRunActionOperation main]
    #21 0x9094d34c in -[__NSOperationInternal start]
    #22 0x9094cfe0 in ___startOperations_block_invoke2
    #23 0x91caa7b8 in dispatch_call_block_andrelease
    #24 0x91c9c97e in dispatch_workerthread2
    #25 0x91c9c401 in pthreadwqthread
    #26 0x91c9c246 in start_wqthread
    Any more advice would be appreciated.
    Scott

  • How to drag transparent swatch when creating new custom tool panel in CC 2014

    Hi guys. I'm having trouble dragging the transparent swatch over to a new panel I'm trying to create. Love the new feature, but not sure how to get this last crucial item on my toolbar:
    Thanks for helping out!

    thesergie wrote:
    Or is the main toolbar not customizable (ie I can only create custom toolbars)?
    Exactly.
    Would be nice if it were ...

  • Create new notification from action box

    Hi,
    We have the following scenario: In transaction IW52 (Notification modification) we have created a new follow-up function, with this new function we want to create a new notification with some data from the current notification.
    The activity of the new follow-up function executes a Z function module. Everythings works fine except that when the function module is finished and the new notification is created it shows the IW52 transaction with all fields blank.
    We have tried to do it with the functions mdules from IQS0 group function and with business object BUS2080, both options had the same result.
    With the debuging we have found that when the follow-up action is called from standard code in SAPLIQS0 - LIQS0F75 - FUNKTION_ACTIONBOX_F75 the viqmel is null when follow-up action is ended:
              CALL FUNCTION l_funktion-baustein
                EXPORTING
                  i_viqmel       = viqmel
                  i_customizing  = l_funktion
                TABLES
                  ti_iviqmfe     = l_iviqmfe
                  ti_iviqmur     = l_iviqmur
                  ti_iviqmsm     = l_iviqmsm
                  ti_iviqmma     = l_iviqmma
                  ti_ihpa        = l_ihpa2_tab
                EXCEPTIONS
                  action_stopped = 1.
    Thanks.
    Edited by: Sistemes Emaya on Oct 28, 2011 10:46 AM

    Hi,
    In this case follow below steps mentioned below.
    Action box in IW52 trigger your Z Function module so use below steps may it will help you.
    Inside your Z Function module-
    1 ) Get notification number from Parameter id using command "GET PARAMETER ID XXXXXXX" .
    2 ) Fetch relevant records from database on behalf of notification number which you get in step 1.
    3 ) Use records in your Z Function module to create another notification as per your requirement. 
    Thanks,
    Vijay

Maybe you are looking for