Create New Custom Schema..
HI,
how to Create New Custom Schema.. like apps in EBS 11i..
thnaks
Hi user;
how to Create New Custom Schema.. like apps in EBS 11i..Please check below thread's mention note&advice etc.
custom Schema-r11
Re: REG:creation custom schema
Regard
Helios
Similar Messages
-
Create new, custom transitions?
Hi all! I'm working on possibly replacing FCP X in my workflow. One of the great things about FCPX and Motion was that I could create my own transitions using Motion and "placeholder" footage, then easily load them as new transition effects in an FCP X project. I have a series of light leak transitions that were basically a dissolve between A and B, with the light leak/bokeh footage overlaid with Add blend mode. While I know I can just place the footage over the edit points on the timeline, it would be much easier and cleaner to simply apply these as transitions instead.
Is it possible to create my own custom transitions with Premiere or After Effects, that can be applied as transition effects directly to clips on the timeline?Hi user;
how to Create New Custom Schema.. like apps in EBS 11i..Please check below thread's mention note&advice etc.
custom Schema-r11
Re: REG:creation custom schema
Regard
Helios -
I need to create my own PPF action, but I don't know if I need to create it at the Action Definition level or if I need a new Action Profile and then a new Definition. I have a theory as to why you would create a new profile but I can't confirm. Can someone confirm or correct me please?
My theory is:
1. The application key is at the Profile level so if you require a different key you need a new Profile, and
2. The application object passed into the custom method is defined in the "object type" at the Action Profile level also.
So, if you require different information passed into your method or a different key than the existing Actions allow, you need to create your own new profile.
Is this correct? Also, any documentation you can point me to on this topic will be greatly appreciated.
Thanks,
MikeHi user;
how to Create New Custom Schema.. like apps in EBS 11i..Please check below thread's mention note&advice etc.
custom Schema-r11
Re: REG:creation custom schema
Regard
Helios -
How to create new Custom XML Report without using Form Builder
Hi,
What are the steps to create new Custom XML Report without using Report Builder ?
Thanks and Regards,
AbhiHi,
Steps we now follow
1)Create Data Model in Reports Builder
2)Create xml
3)Insert xml in Publisher to build Fomat
4)FTp rdf
5)Create Data Definition and Template
6)Create executable and Concurrent Program
Is there any way we can build reports without use of Report Builder ? By writing PL SQL Package for Before Report and After Report etc ...
Thanks and Regards,
Abhijit Rode -
Creating new database schema in jdev
can I create new database schema in jdev.If yes how?
I have checked many links but they are telling how to create connection to an existing database but not to create new databse?
Please help..I have checked many links but they are telling how to create connection to an existing database but not to create new databse?
Database is required to be installed and a database instance created.
Oracle Database Software Downloads | Oracle Technology Network | Oracle </title><meta name="Title" co… -
AR: Error Creating new Customer
Hello,
I am having error the following error creating new customer in AR 12.1.1 "Invalid value for currency_code. Please enter currency_code value from fnd_currencies". The currencies are all enabled.
Thanks,Please see these docs.
Cannot Add Customers. Error: Invalid Value For Currency_code. [ID 554555.1]
CUSTOMER INTERFACE STATUS ERROR CODES [ID 1073634.6]
Resource Addresses and Subinventory Assignment Fails with APP-295320: Provide a positive integer [ID 986655.1]
Thanks,
Hussein -
Create new Customer pricing group
Hi,
How to create new customer pricing group in Development server & Transport to Quality Server & then Production.Hi
If you are refering the Pricing group field in the Customer Master, it is available in Customer Master Sales Area Data Sales screen.
It can be configured via IMG - Sales & Dist - Basic Functions - Pricing - Maintain Price Relevant Master Data Fields - Define Pricing Groups for Customers. Transport methodology is via transports to other environments.
Regards
Nara -
Error while creating new customer(xd01)
following error ocurred while crating new customer.It wasnt case when i created customer before for the S/Org....
"Communication error with external tax system(Vertex_MS0018)"
Msg No TAX_TXJCD864)
Pls help..
thanks
AmolHi Amol,
One user faced the same issue on IT tool forum, check the link for solution.
http://sap.ittoolbox.com/groups/technical-functional/sap-crm/communication-error-with-the-external-tax-systemvertex_ms0018-909264
Hope it helps,
Regards,
MT -
Can we create new customer site for existing customers using custm interfc
Hi ,
I have a requirement :
version -- R12 .
We need to add new customer site for existing customers , is it possible to create it through customer interface with insert_update_flag set as U / I .
Any help in this is grate .
regards ,
Azzu .I am pretty sure I've done this on one of my past project..
why don't you try it out?
Another route would be use customer APIs (TCA APIs)...which I am sure can achieve what you're looking for.
Edited by: James Kim on Mar 17, 2010 2:48 PM -
What to take into account to create a custom schema?
Hello, we are going to start the process of migrating from Oracle E-business suites R11.5.10.2 to R12; we have been doing our custom applications into the APPS schema. For this upgrade, we would like to start fresh and move all our custom applications to a custom schema to have control of all the customizations. I need your feedback on what are the things we need to take into account to accomplish that.
Please let me know anything that comes to your mind on what to consider, and if you have a good guidance on how to do it should be great.
Thank you.user8969211 wrote:
Hello, we are going to start the process of migrating from Oracle E-business suites R11.5.10.2 to R12; we have been doing our custom applications into the APPS schema. For this upgrade, we would like to start fresh and move all our custom applications to a custom schema to have control of all the customizations. I need your feedback on what are the things we need to take into account to accomplish that.
Please let me know anything that comes to your mind on what to consider, and if you have a good guidance on how to do it should be great.Please see these docs/links.
Integrating Custom Applications with Oracle Applications [ID 176852.1]
Step By Step Guide to Creating a Custom Application in Applications 11i [ID 216589.1]
Integrating Custom Objects and Schemas
http://docs.oracle.com/cd/E18727_01/doc.121/e12897/T302934T458264.htm#4164796
Can't Open Custom Forms After R12 Upgrade [ID 552010.1]
How To Upgrade 11i Custom Forms To R12 [ID 563258.1]
Accessing Custom Forms After Upgrading From To R12. [ID 451934.1]
Do Not Compile EBS R12 Reports Using rwconverter.sh or Reports Builder from IDS 10gR2 [ID 786794.1]
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
Thanks,
Hussein -
Error creating new Customer Equipment Cards
Dear experts,
I am getting the following error when creating a new Customer Equipment Card:
This entry already exists in the following tables 'Customer Equipment Card' (OINS) (ODBC -2035) [Message 131-183]
I cannot find out what is causing this!
SAP B1 version is 8.81 PL07;
Any help please?
VictorDear Victor,
It could be by bug. In general, the NextNumber in NNM1 for this object is already used. You need to find SAP or partner support to solve the issue.
Thanks,
Gordon -
Create new customer using BAPI BAPI_CUSTOMER_CREATEFROMDATA1
Hi There,
I am trying to create a new customer in SAP through BAPI for demo purpose. The BAPI function I used is BAPI_CUSTOMER_CREATEFROMDATA1. However, the BAPI call requires a reference customer. How can I find a valid reference customer in SAP? Furthermore, is it correct at all to use this BAPI function to create a new customer? Is there any other BAPI function that I can use to do the same stuff? Thanks a lot in advance for your help!
Thanks,
LeiHi,
I didn't get which system of SAP are you refering to , but as this forum is for CRM i assume that you want to create customer in CRM.
So for creating a customer in CRM you can use the BAPI,
BAPI_BUPA_CREATE_FROM_DATA
and for getting the reference customer jsut execute the following FM in test enviroment to get the Business Partner no and Business Partner GUID.
CRM_BUPA_CONSUMER_GET_REFERENC
Hope this helps.
Regards
Sidd -
How to drag transparent swatch when creating new custom tool panel in CC 2014
Hi guys. I'm having trouble dragging the transparent swatch over to a new panel I'm trying to create. Love the new feature, but not sure how to get this last crucial item on my toolbar:
Thanks for helping out!thesergie wrote:
Or is the main toolbar not customizable (ie I can only create custom toolbars)?
Exactly.
Would be nice if it were ... -
How to set country field automatically when creating new customer??
Hi Gurus,
when customer number is entered in account identification, if there is no matching account, a new one is created. While creating , in the screen there is an country field and I want to set this field to a fixed value of our country. How can I do this??Hi everybody,
I got a simple question. Can I use BADI: BADI_CRM_BP_UIU_DEFAULTS of Enhancement Spot CRM_UIU_BP_ENHANCEMENT
to make the country 'US' as a default value for component: ICCMP_BP_DETAIL (NOT: BP_HEAD)?
Component ICCMP_BP_DETAIL is Interaction Center.
If not which Badi or way I can use to make country 'US' as default value?
Best Regards
Oliver
Edited by: Oliver Schultze on Dec 9, 2010 4:33 PM -
Updating custom schema created using RCU
I followed the following chapter from RCU user guide to create a custom schema using RCU:
[Extending Repository Creation Utility to Configure Custom Application Repositories|http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14259/rcu_extend.htm]
RCU allows only two operations - 1. create a new schema OR 2. drop a schema.
Can RCU be used to update or modify a custom schema, which has been created using RCU itself?
The use case is: update certain rows in a few tables of the custom schema, whenever there is a fix.
Basically we need to deliver patches (insert scripts containing the fixed or corrected data) to the custom schema created using RCU.
Does RCU support this use case?
Thanks,
Mahendra
Edited by: Mahendra Varman on Jun 8, 2011 5:10 PMThanks for the suggestions. Having a bad day with this today.
Unfortunately, it did not work. I had to re-install the whole thing with the repository in an 11g database and that didn't work either! (see OBIEE 11g: Cannot log into BI Publisher after fresh Install
Thanks.
Maybe you are looking for
-
Apple Application Support not found when trying to open iTunes
iTunes not opening. Error 2 message keeps popping up saying that Apple Application Support is not found. (Dont' know where it went!!!) It's asking me to uninstall and reinstall iTunes. B4 I do, will I lose my library and have to start over?
-
Regarding" Material PO text " with input parameter is PR requisition
Hi Experts, I need to develop a ALV report in which the input parameter is PR requisition, Requisition date, Plant ,Purchase Group, Purchase organization And I needed to get its corresponding u201Cmaterial PO Textu201D. I am using the function module
-
An error occurred while trying to access the service when trying to access adobe send since feb 28
I have been trying to access my adobe send to send some files keep getting error message : an error occured while trying to access the service" everything was fine up until yesterday...
-
Problems with servlets and packages
"im trying to use a package called C:\Acme which includes a GifEncoder C:\Acme\JPM\Encoders the problem is that weblogic 6.1 doesnt seem to find it, this is the error i get in the console <Dec 8, 2001 2:46:20 PM PST> <Error> <HTTP> <[WebApp
-
Only last pm_order operation in 0PM_DS04_Q0021 query?
Hi Experts, When I execute query 0PM_DS04_Q0021 - Outstanding Order List,which runs over the DSO 0PM_DS04 - Maintenance Orders, Operations and Costs, I expect to have actual and planned time by order, but for all operations that occur in that PM orde