Create new jobB,fill jobB with part of jobA & delete this part from jobA

Hi guys,
Here Job A = CATALYST_1 , Job A = CATALYST_MOGI.Could any one tell
me how to resolve this? Any information will be help full.
it is necessary create a new job with part of the programs that exist in
the Job JCATALYST_1 , and alter this job, deleting the part that will contain
in the new Job CATALYST_MOGI.
It´s required to create a copy of the Job CATALYST_1 like Job CATALYST_MOGI.
In the Job CATALYST_1, delete the part that contain the execution of Mogi jobs.
In the Job CATALYST_MOGI, delete the part that contain the execution
of others Jobs and just need to stay in this job execution that refers to MOGI Jobs.
Tthe execution that refer to Mogi Jobs is highlighted with "*in the below lines, that
must be delete of CATALYST_1
And must be executed in the new Job CATALYST_MOGI.
Currently the log of Catalyst_1:
Data Hora Texto mensagem
Regards,
Sonam
Edited by: sonamrata on Apr 20, 2010 11:53 AM
Edited by: sonamrata on Apr 20, 2010 11:57 AM

Hi guys,
Here Job A = CATALYST_1 , Job A = CATALYST_MOGI. We have job CATALYST_1 with log entries as below.
Now I have to 1)create a new job CATALYST_MODI (I can do this using SM36 tcode.)
                        2)put some ofthe log entries into job CATALYST_MODI(highlighted by "* iin below logentries)
                        3) delete these entries from CATALYST_1..
In other words I have to include programs ZSYSDI_PARTS_HOLD_RELEASE and ZSYSDI_CALL_SHIP
in the new job CATALYST_MODI and delete these programs from Job CATALYST_1.
Currently the log of Catalyst_1:
Data       Hora     Texto mensagem
16.04.2010 10:40:44 Job executado
16.04.201010:40:44 Etapa 001 executada
(program.ZSYGLI_CONTROL_INTERFACE, variante ,
nome usuário MAESTRO)
16.04.2010 10:40:44 Enqueue em tabela Interface 0
"*16.04.2010 10:40:44 Buscando Diretórios das Interfaces
"*16.04.2010 10:40:44 Busca Arq. de ls -tr
'*/me/proj/BZLSBYSNG/SDI2034/InBound/sap/MOGI
"*16.04.2010 10:40:45 Start JOB CTR_INTRF-SD.I.2034M
'*ZSYSDI_PARTS_HOLD_RELEASE
"*16.04.2010 10:41:44 Aguardando JOB CTR_INTRF-SD.I.2034M 0
"*16.04.2010 10:41:44 Busca Arq. de ls -tr
/me/proj/BZLSBYSNG/SDI0404/InBound/sap/MOGI
16.04.2010 10:41:44 Start JOB CTR_INTRF-SD.I.0404M ZSYSDI_CALL_SHIP
16.04.2010 10:41:44 Busca Arq. de ls -tr
/me/proj/BZLSBYSNG/SDI2034/InBound/sap/SOR9
16.04.2010 10:41:44 Start JOB CTR_INTRF-SD.I.2034S
Regards,
Sonam

Similar Messages

How to create new view without interlinking with gantt chart or resource views

ok clear
one another question
In msp how to create new view without interlinking with gantt chart or resource views

Hi Shiv PMC--
I splitted your question above in another thread in order not to have a huge thread with many topics in it.
That being said, I'm not sure to understand. A view is just a manner to display MS Project data with columns. A view can have a table with column (left part) associated with a Gantt chart. It can also just contain a table with no Gantt chart (like the task
table) or a table with a timephased grid (resource and task usage).
Please give us more information, maybe with a concrete example so we can help you.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

How Create New Folder in KM with Name having Special Character

Hi,
How to create new Folder in KM with name having special character in it.
Right now its not allowing me to create folder when i have Colon( as one of the character in name of the folder.
Is there a way to change this validate?
Any help is appriciated.
Thanks

Hi DK,
I'm not sure about special chars such as ":" but ifyou need to have your folders displaying special language chars (like german chars), have a look into the below link.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30deb229-d570-2910-4aaf-8858e0660f05
Hope that helps.
Ray

Something has gone wrong with my external hard drive after my macbook battery went off.. now i cannot paste or create new folder. Does anyone know how to fix this?

something has gone wrong with my external hard drive after my macbook battery went off.. now i cannot paste or create new folder. Does anyone know how to fix this?

Bus powered external drive?
Backups?
Does Disk Utility can see and repair the drive or not?
Also try here in future: MacBook Pro

I have creat new apple id when i sign in 1st time this will say this apple id has not yet been used in itunes store? please help

i have creat new apple id when i sign in 1st time this will say this apple id has not yet been used in itunes store? please help

I changed my dads password, then went back to sync my apps and when it came to the Authorization, I entered his account name and the new password (which was by the way accepted and changed correctly) to have it come up on the screen as the incorrect password...REALLY!!! I went back and changed the password again...guess what? Same result "inncorect password".
As I mentioned my dad PASSED AWAY, there is no way I can ask him what his password originally was, i can't accesses his email account as it no longer exists.
What am I supposed to do, this is very frustrating.
If I use my new account that's in my name, the Authorization screen just keeps asking for my Dads account.

Have Operating System 10.6.8, Mail Program 4.6. How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to m

Have Operating System 10.6.8, Mail Program 4.6.
How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to manually opening every few month with no ? action from me.
Help

Have Operating System 10.6.8, Mail Program 4.6.
How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to manually opening every few month with no ? action from me.
Help

I have forgotten icloud account password linked to my ipad. I am unable to reset the password as well as delete this account from my ipad, and use a new one.

I have forgotten icloud account password linked to my ipad. I am unable to reset the password as well as delete this account from my ipad, and use a new one.

None of us here, nor Apple, can help you.

I think things would have been better without this icloud mess...... someone help me like it again. 1). i have more than 1 account set up with icloud. so i deleted 1 account from the settings on my iphone to try and switch to the other account and ever

i think things would have been better without this icloud mess......
someone help me like it again.
1). i have more than 1 account set up with icloud. so i deleted 1 account from the settings on my iphone to try and switch to the other account and everything became a huge mess. (on my iphone i LOST some of my contacts, all of my reminders are gone, and nothing is showing up on the ical on my iphone, and only some notes are showing).......
2). everything is still shown on my macbook pro.... but when i tired to go and sync it..... nothing is transfering to my phone........
3). when i log into the 2 icloud accounts i have with icloud(.com) nothing is showing up in there also......
whats is going on..... this is a huge mess for me. i want to go back the way is was like 1-2 years ago. when you can just sync things from the computer to the phone and not have to go through icloud....... ive been struggling with icloud but today just me hate it to the max.
ANY HELP ON HOW I CAN FIX ALL OF THIS.....
THANK YOU VERY MUCH!

the version im using is 10.7.5
im not sure what you mean by you second statement. when i open those application on my macbook its on my macbook but when i sign into icloud. i have those option selected.
maybe my problem is im using the wrong ID...... lol.
is there away you can delete or change icloud accounts/ ID's???

I recently upgraded to an iPhone 5 and I have this synced with my previous iCloud account. My problem is my old iPhone 4 is taking up 2.5 GB of space in the cloud. Is there a way to delete this iphone from the icloud so I can free up space?

I recently upgraded to an iPhone 5 and I have this synced with my previous iCloud account. My problem is my old iPhone 4 is taking up 2.5 GB of space in the cloud. Is there a way to delete this iphone from the icloud so I can free up space as it is not needed anymore?

Welcome to the Apple Community.
Assuming you have finished with your old backup.....
You can see what your iCloud storage is used for and delete any unwanted content at settings > iCloud > backup & storage > manage......

Issue: I synced my iphone with itunes, I then deleted many songs from the iphone, when I sync to itunes again is there any way to have itunes duplicate what it sees on the iphone rather than the other way around?

Issue: I synced my iphone with itunes, I then deleted many songs from the iphone, when I sync to itunes again is there any way to have itunes duplicate what it sees on the iphone rather than the other way around?

so, if I delete all music on itunes then connect my iphone all my music on the iphone will then be deleted?

Create new system and client with TDMS

Hi all;
I am tested the TDMS product with good results. I want create a new system and do one copy with time reduction time for new development system
What it´s the best solution?
- Install new system and do the client copy with TDMS
or
- System copy of production system, delete production client, create new client with UCUSV of productive system and copy client with TDMS?
Thanks a lot

Hi;
It´s true :).
Ok, one example, I have two systems, I want create system shell from A (client 900) to B . The central system is C
In system B I don´t have any client but the Cross is diferent to system A
I select in TDMS - ERP Shell Creation Package for SAP Release higher 4.6C
System Definition;
- Control system - C (all information it´s correct)
- Sender system - A (Client 900)
But i dont have any information about the receive system (A).
When execute the synchronization appears the system A, but with any information (destination ID)
and I have the error: Could not change password of RFC Destination sender system
Any Idea
thanks a lot for the help

Create new sheets in report with script?

Is it possible to create new sheets in the report using VBscripts?
I am writing a script that will create a report with different sheets. The number of sheets in the report will change in each report depending on the number of groups added in the data portal. For example: If there are 3 channel groups in the data portal I will need 3 sheets in the report.
I searched for the instructions but I could not find how to do it.
And another question: how can I insert the name of a channel group in the report?
I am using DIAdem 9.0.
Thank you very much!

For all with the same problem: You can copy the Picture an paste it automaticaly in ms word.
Here my code:
Call PicPrint("WinClip") ' Copy picture to clipboard
'open Word document
' Start Word via OLE.
' Always a new instance of Word will be created.
Set Word = CreateObject("Word.Application")
' Make Word visible. Until now Word was not visible.
Word.Visible = True
' Maximize Word-window.
Word.WindowState = wdWindowStateMaximize
' Create new Word-document based on prepared template.
   AutoDrvLibr="C:\......"    'direction of the Word ducument
   Const DiademWordTemplate = ".....doc"                                'ducument name
   Word.Documents.Add AutoDrvLibr & DiademWordTemplate, false
    ' Maximize document-window.
call copy_to_Word
Private Sub copy_to_Word
Word.ActiveWindow.WindowState = wdWindowStateMaximize
' Activate fullpage mode in Word.
Word.ActiveWindow.ActivePane.View.Zoom.PageFit = wdPageFitFullPage
' Set reference to Word-document.
' With the help of this reference you can easily acess the Word-document.
Set WordDoc = Word.ActiveDocument
Const wdPasteMetafilePicture = &H3
'Paste picture
Word.Selection.Range.PasteSpecial , , , , wdPasteMetafilePicture
Word.Selection.EndKey 5                 'Set Courser to end of page
Word.Selection.Range.InsertBreak(&H1)   'paste new sheet
Word.Selection.MoveDown 5,1             'move ohne row down to set the courser to the next page
end sub

Create new IMAP & SMTP account with AppleScript

After reading a thread over here where some of you mentioned the problem creating a new mail account using AppleScript in fact there really seems to be a bug that doesn't allow to change authentication of a SMTP server to Password.
So I ended up going this way using PListbuddy. Of course this is no complete script and you have to adapt it to your needs. But in general "automatic" creation of new accounts works fine. We're using it to provide this to our customers as Apple Mail does not support automatic creation of mail accounts using autoconfig or autoresponder.xml.
set command1 to "/usr/libexec/PlistBuddy -c 'Add :DeliveryAccounts:0 dict' ~/Library/Preferences/com.apple.mail.plist"
set command9 to "/usr/libexec/PlistBuddy -c 'Add :DeliveryAccounts:0:AccountName string " & theMail & "' ~/Library/Preferences/com.apple.mail.plist"
set command2 to "/usr/libexec/PlistBuddy -c 'Add :DeliveryAccounts:0:AccountType string SMTPAccount' ~/Library/Preferences/com.apple.mail.plist"
set command3 to "/usr/libexec/PlistBuddy -c 'Add :DeliveryAccounts:0:Hostname string " & servername & "' ~/Library/Preferences/com.apple.mail.plist"
set command4 to "/usr/libexec/PlistBuddy -c 'Add :DeliveryAccounts:0:SSLEnabled string YES' ~/Library/Preferences/com.apple.mail.plist"
set command5 to "/usr/libexec/PlistBuddy -c 'Add :DeliveryAccounts:0:ShouldUseAuthentication string YES' ~/Library/Preferences/com.apple.mail.plist"
set command6 to "/usr/libexec/PlistBuddy -c 'Add :DeliveryAccounts:0:Username string " & username & "' ~/Library/Preferences/com.apple.mail.plist"
set command7 to "/usr/libexec/PlistBuddy -c 'Add :DeliveryAccounts:0:uniqueId string " & myid & "' ~/Library/Preferences/com.apple.mail.plist"
set command8 to "/usr/libexec/PlistBuddy -c 'Add :DeliveryAccounts:0:AuthenticationScheme string PASSWORD' ~/Library/Preferences/com.apple.mail.plist"
do shell script command1
do shell script command2
do shell script command3
do shell script command4
do shell script command5
do shell script command6
do shell script command7
do shell script command8
do shell script command9
tell application "Mail"
          set newimapac to make new imap account with properties {name:theDescription, user name:theUsername, uses ssl:true, server name:servername, port:"993", full name:theName, email addresses:{theMail}}
          tell newimapac
                    set authentication to password
                    set user name to username
                    set password to thePassword
          end tell
          set mysmtp to smtp server (theDescription)
          tell mysmtp
                    set password to mypass
          end tell
          set smtp server of newimapac to mysmtp
end tell

The following works exactly right, so far as I can tell (note that I made a copy of the Mail.app plist and renamed it
com.apple.mail_copy.plist). what are you doing differently?
set theMail to ""
set servername to ""
set myid to ""
set username to ""
set accountRecord to {AccountName:theMail, AccountType:"SMTPAccount", Hostname:servername, SSLEnabled:"YES", ShouldUseAuthentication:"YES", uniqueId:myid, |Username|:username, AuthenticationScheme:"PASSWORD"}
tell application "System Events"
          set theMailPlist to property list file "~/Library/Preferences/com.apple.mail_copy.plist"
          tell theMailPlist
                    tell property list item "DeliveryAccounts"
                              set newAccountItem to make new property list item at beginning with properties {kind:record, value:accountRecord}
                              tell newAccountItem
                                          make new property list item with properties {kind:string, name:"Username", value:username}
                              end tell
                    end tell
          end tell
end tell
to find a particular item in a list or directory, you use code like the following:
tell application "System Events"
          set theMailPlist to property list file "~/Library/Preferences/com.apple.mail_copy.plist"
          tell theMailPlist
                    tell property list item "DeliveryAccounts"
                              get every property list item whose (value of property list item "Username") contains "chump"
                    end tell
          end tell
end tell

Adobe Premiere CS6 'Create new Trimmed Project' Crash with .MXF files

Yesterday I started to back up all our students work, and found that the "Create New Trimmed Project" no longer works in CS6 with .MFX files.
Adobe Premiere CS6.0.3, crashes when I try to "Create New Trimmed Project" under "Project Manager"
This only happens when there are .MXF files in the Sequence.
As we use Panasonic P2 cameras at this university, this is a problem, as this is the format that they shoot in.
As a test I have made a Project with only one .MXF file placed on the sequence, and it crashes.
This happens on my Macs and Windows machines with Adobe Premiere CS6 .
Adobe Premiere CS5.5 works fine, and does not crash.
Unfortunately I cant save a CS6 project as a CS5.5
If you don't have any .MXF files to test this,
You can make your own .MXF files by exporting any video file as "MXF OP1a" or "P2 Movie" Format, (the Preset setting is irrelevant - any preset will cause it)
P.S.
Using "Collect files and Copy to new Location" under "Project Manager" works fine, but does not reduce project size as much.

I also discovered this behavior last summer. Unfortunately the best (lame) answer I could find was that "Some formats, such as Long GOP based media files, cannot trim media, or add handles." Source: http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7c72a .html
That's not very specific, but in my case at least (and it sounds like in your case, too) .MXF may be another file type that cannot be trimmed. If I remember correctly, the answers I got from others was that they were able to export fine. My machine (and maybe yours) has an issue that nobody else seems to have encountered. So none of the prescribed remedies allowed me to move forward in this regard.
After much searching, asking and several suggestions from various Premiere communities, I gave up and moved on.
Use Remove Unused and then Collect Files and Copy to New Location. At least that can help you if you have a lot of clips. In my case, it didn't help much, because my very short clips were edited from very long takes, so as Premiere sees it, not much was "unused".
Be aware that "Project Manager does not copy and collect After Effects compositions that are dynamically linked to an Adobe Premiere Pro project. Project Manager does save the Dynamic Link clip in the trimmed project as an offline clip, however."
Wish I could offer you more.

Create New NON SA user with Priviledges

Hi all,
I want to create new non sa user login with openrowset function privileges for read/write operation on excel sheet file.
So please can nay one give me example or script to create non sa user login with above privileges.
Thanks in advanced.

Thanks to all for reply.
I give ADMINISTER BULK OPERATIONS permission to user I also create linked server with required credentials but does not work. With sa
credentials it work.
I execute following statement
select * from openrowset('Microsoft.ACE.OLEDB.12.0',
Excel 12.0;HDR=Yes;Database ='C:SAMPLES\Northwind.xls';select * from [sheet1$])
when I execute above statement it gives me error.
please reply.
Hi AK9841,
Please review the detailed answer in your another thread,
https://social.technet.microsoft.com/Forums/en-US/59710c1d-6bfe-42dc-ac80-643b9ae7f8f0/create-new-non-sa-user?forum=transactsql
Thanks,
Lydia Zhang

Create new jobB,fill jobB with part of jobA & delete this part from jobA

Similar Messages

Maybe you are looking for