Create new message after new ical starts

hey all... been looking for a thread on this but didn't see it.
when i first launch the new ical app and create a new event then attempt to enter the title (subject?) for that a event ical interrupts the process and closes the event even though i haven't finished entering the title.
sometimes it will throw me into the edit event mode (like when you hit cmd E on an existing event) and blur the focus from the subject of the event.
i can see ical trying to sync when this happens (icon by [email protected] on top of my calendar list). and typically it only happens for the first few seconds after ical launches. of course - i could just leave ical running but i do a lot of hd video and high end graphics editing and i don't want to use system resources for ical if i dont' have to.
makes sense to me - launch the program, add event, close program. pretty much how i use everything on os x. when you're done with a program you close it.
anyone else seeing this?
k

bump.
anyone seeing this problem - ical won't let me enter a topic for new events and instead loses focus from the entry... only happens for first minute after launching ical.
this has only been happening since upgrading to the new mobile me version of ical. never happened before but now it's pretty much unusable. see previous post for full description.

Similar Messages

  • How can I restore a back up of an old iphone to a new iphone (after I accidentally started a "new" iphone name?

    how can I restore a back up of an old iphone to a new iphone (after I accidentally started a "new" iphone name?

    Unfortunately you do not have direct access to iOS backs in iCloud.
    I am not sure what you mean by:
    It's locked with an enterprise (third party code)
    Do you mean it is a corporate device and managed by Mobile Device Management software?
    If so the IT department can reset the passcode.
    Other than that, there is no third party iOS app that can lock the device at that level unless it is jailbroken and then no one here can help you.

  • My boyfriend cant recieve messages after new ios 7 update?

    My boyfriend isnt recieveing my messages after new update. He only sees the message whem he opens the app. We are both on vodafone i recieve his and my friends recieve mine so it cant be the network. Ive looked at notification centre and i dont see any problems soo wtheck!! Any help? Anyone having this or has a solution.

    Hi wendylee1972,
    You might find the following resource helpful in troubleshooting iPhone battery life:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Battery life seems short
    Click (www.apple.com/batteries/iphone.html) for tips on how to prolong iPhone's battery life.
    Try turning iPhone off and then on again.
    Connect iPhone to iTunes and restore iPhone.
    If the screen shows a low-battery image, the battery is low on power and needs to charge for up to ten minutes before you can use it.
    When charging iPhone, make sure to leave it charging until it is fully charged. You'll know the battery is fully charged when the battery icon in the upper-right corner of the screen looks like this .      
    Note: When charging using a computer, don't connect iPhone to a keyboard. Also, the computer must be turned on and not in sleep or standby mode. If iPhone is connected to a computer that's not turned on or is in sleep or standby mode, the iPhone battery may drain.
    Note: Charging with a FireWire-based power source is not supported, except on original iPhone.
    If you continue to have battery-life issues, we may need to isolate the issue further. It might be best to restore your iPhone as new, then test once more:
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Thanks,
    Matt M.

  • Problem with new message after creating a note

    Has anyone else had this behavior in Mail 3? It happens to me quite frequently- the problem goes like this:
    Create a new note
    Hit done on the new note to save it
    Then, when trying to create a new message, nothing happens. I can hit the button all day and nothing happens.
    Next, upon quitting mail, I see all of these drafts show up and when I restart Mail, there are as many blank drafts as times I tried to create a new message.
    I've sent a bug report. It doesn't happen all the time but it has happened a lot to me.

    Yes!
    I have this same problem. I had not bothered to track down its root cause, but I do (rarely) use the Notes feature in Mail, so that may well be what triggers this annoying behavior.
    -Tony

  • Cannot view new messages after setting up Gmail

    I had problems setting up my IMAP so had to delete my Gmail account and reinstall. Anyway, I have about 12K emails, and can view some, but I have 200 new message that I CANNOT View.
    Any suggestions??? I've tried nearly everything.
    Should I disable POP is IMAP is enabled?
    Thanks

    Update: message sent from Mozilla to confirm this new message does appear, so it seems that messages received today 9/26 that were sent before Thunderbird updated to 31.1.2, are not viewable. The header appears but not the message itself. Messages created before midnight are appearing, this is most strange. Maybe the messages from today will appear after midnight.

  • Pc suite 7.0.8.2 no new messages after unicode SMS...

    I was using 7.0.8.2 on XP quite happily until a strange problem appeared. after receiving a multipart unicode SMS on my 6300, pc suite was no longer aware of any new messages - i.e. when I look at the "inbox", it had every message up to the unicode (chinese) message, but nothing newer than that. that makes the program no longer useful for me. I did not have this problem with any of the previous versions of pc suite. (I am a long-time user).
    has anyone else had this problem?

    You can try to move that unicode SMS to SIM card.
    What's the law of the jungle?

  • Nokia c3-00 cannot write a new message after firmw...

    Hi 
    My problem afther update to firmware v8.63 is that i cannot write a new message
    Shortcut  <- keypad (pressing left directon on keypad) 
    or when i go to MENU>MESSAGES.NEW MESSAGE then nothing happends
    i can reply or send a new message to someone by the replying  option and changing target number, or using the call log but its quite anoying, and 2 social icons in menu.
    i have already tried 
    1. reset to factory settings  - FAILED to fix problem 
    2.reinstaling phone update - FAILED to fix problem
    MODERATOR'S NOTE: Subject line changed.

    you need to do a master reset on the phone but before you do that make sure to backup you files without the settings and applications on your comp using the ovi suite bec master reset will remove eveything that you have on your phone memory. after the backup dial this code on your phone *#7370# lock code 12345. if your phone is turned on again try now to send a new text message. if it will allow you now, restore now you backup file but dont include the settings.
    MODERATOR'S NOTE: Subject line changed.

  • SMS inbox doesn't show new messages after upgrading to OS 5.0.0.681. SMS format appears as IM.

    My SMS inbox doesnt show new messages and also my Curve 8900 doesnt prompt for any new messages. However, the Mobiso application (which logs calls, texts) shows messages coming in with its text lengths. I asked this to Blackberryhelp on Twitter but it said to contact service provider, but there is nothing wrong with it. The format of the SMS inbox should have something wrong otherwise the Mobiso application should not have logged all messages.
    Please help me, i am missing all my daily SMS since last 20 days.
    Will degrading the OS help? Which is recommended OS version for BB Curve 8900?

    Hi,
    Here are some good articles listing the available methods for organizing and displaying messages in device OS 5.0. If you can't set your exact preferences I suggest looking in AppWorld for custom programs.
    Let us know how it goes!
    Thanks,
    Bifocals
    What is new in BlackBerry Device Software 5.0    
    Option for separate SMS and Email message inboxes is missing
    How to integrate SMS text messages with BlackBerry Messenger 5.0
    SMS text messages received from multiple senders appear in the same conversation thread on the Black...   
    Organizing your inbox’s main Messages list
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Nokia 701 - no new message but new message sign fl...

    hello
    i got a new 701 for 3 days now. im realy satisfied. i just came across a problem
    i do not have any new messages but still, the sign flashes ..
    i deleted all the messages, checked all missed calls, checked all emails, rebooted phone X times
    any way you can help me?
    thank you
    Solved!
    Go to Solution.

    Its not the breathing light!
    And this is the path to take on the 701 its slightly different to the normal route.
    Select Menu > Messaging > Options (bottom right icon) > View folders > Options > SIM Messages > Tap Message > Delete.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Error messages after new MobileMe Calendar upgrade. Solved?

    Quick rundown of what I've been through and how I have solved my problem.
    I have a MacBook running 10.5.6 and I also have Bento 3. Recently Bento (Filemaker) told me that I would have to complete a few steps before upgrading to the new MobileMe calendar. So I followed the steps exactly. (URL: http://help.filemaker.com/app/answers/detail/a_id/7846/~/setting-up-bento-for-th e-new-mobileme-calendar)
    After completing the steps. I proceeded to upgrade to the new calendar. Upgraded in less than a minute and then after opening up iCal on my mac & importing my calendars, thats when things started to go wrong. I kept getting error messages on almost every even I have ever created. I could barely even quit iCal due to all the error messages. Also, many of my events werent there after importing and the progress wheel kept spinning. Complete DISASTER! (*Luckily, I made plenty of backups before doing any of this so I was safe*) But Still I had NO iCal!
    I searched and searched and could not find a complete solution. So what I did was the following and so far I believe it could be the solution to all of you guys's problems.
    I followed these instructions on this website (URL: http://answers.makeitwork.com/how-to-reset-ical-on-your-mac-or-how-to-clean-up-y our-ical/) **I followed these exactly**
    They are below:
    +Export any Calendars you wish to retain after you reset by clicking on the Calendar you wish to retain and go to File > Export… > Export…+
    +Repeat the above process for every Calendar you wish to keep. (Make sure you remember where you saved them)+
    +Quit out of iCal+
    +Go to Finder and click on your Home icon to display the Library folder.+
    +Open that folder+
    +Open the Calendars folder in the subsequent window+
    +Delete all the contents within that folder+
    +NOTE: If you open iCal at this point, it will initially appear that you cleared everything. Within minutes, however, everything will come back.+
    +Go to your Utilities folder and open the Terminal application+
    +Enter the following command: rm -rf ~/Library/{Caches,Caches/Metadata,Preferences,Application\ Support}/iCal+
    +Exit out of Terminal+
    +Open iCal and…Voila! Brand new iCal!+
    But that did not completely work. So before doing this again, I went to my iPhone and quit syncing calendars on my mobile me account. And chose to ERASE every calendar on my iPhone.
    After doing that and repeating the process above, I opened up iCal and boom, it worked. Then after I had the calendars setup the way I wanted on my MacBook, I proceeded to go to Preferences>MobileMe>Sync> and then chose to sync
    I then went to Me.com and checked to see if the calendar was operable and it was 100%. I could do everything like before. Then I went back to my iPhone and just turned Calendar syncing back on in my mobileme preferences.
    This has solved all my problems 100%. Hope this helps someone. Just remember that as long as you created a backup of your Calendar you should be safe.
    -Cody-

    Well... seems I didn't have any answer on this. I fiddled a bit more but I have to say that I really came to wits' end at this stage. A couple of observations though:
    * I don't really understand this notion of a keyboard issue. My keyboard and its layout work properly but I will not be able to login regardless of login through GDM, KDM or Slim. Yet it's worth noting that in the case of GDM and SLIM the X server starts; I see the graphical interface, I click, etc. but when I type the trouble starts.
    * I tried to check my xsessions-errors file. The file is really big under a frame buffer, and it wasn't clear to me, but I found strange that the log was reporting all sorts of attempts to start KDE. I don't exactly know what's going on.
    If anybody has any clue, let me know... It's becoming very frustrating.
    Thanks!

  • ITunes library.itl cannot be read error message after new installation

    Hi,
    I have just downloaded iTunes to install on a new Lenovo laptop running Windows 8.1, and after installation I have received the following error message "iTunes library.itl cannot be read because it was created by a newer version of iTunes".
    It was a 'clean' installation - I did not have any previous versions installed and have not yet copied my music across to the laptop or connected by iPod.
    Any suggestions?
    Thanks

    Try the following user tip:
    Empty/corrupt iTunes library after upgrade/crash

  • Time Machine error message after new motherboard installed

    Hi folks,
    I just had a new motherboard installed on my MacBook Pro, and now whenever Time Machine tries to do a back-up (on the same external drive I'd used previously for Time Machine), I get an error message that says there isn't enough space.
    It appears that the attempted back-up tries to back up the entire internal MacBook drive (rather than just the latest updates).
    In other words, since the external drive already has the old data on it, attempts at back up fail.
    Is there something I need to update? Or, do I need to delete all the data on the external (i.e. Time Machine) drive and let the system do a complete back-up?
    Any advice would be greatly appreciated. Thanks very much.
    Vic

    You could try the procedure in the article linked below, but I recommend that you first start a new TM backup on another drive. You need more than one backup anyway. I haven't tested the procedure myself and I can't promise that it won't destroy your backup set, even if you do it right.
    10.5: Repair Time Machine after logic board changes - Mac OS X Hints

  • IE 8.0 Error Message After New AFP Install

    Hi,
    Was already running AFP, so when the new release came out, I got notified automatically, and allowed it to update.  Now, when I run IE, I get a popup saying "Adobe Flash Player Installer/Uninstaller 10.1 r82 has stopped working. 
    The problem details are:
    roblem signature:
      Problem Event Name: APPCRASH
      Application Name: FlashUtil10i_ActiveX.exe
      Application Version: 10.1.82.76
      Application Timestamp: 4c4fd88f
      Fault Module Name: FlashUtil10i_ActiveX.exe
      Fault Module Version: 10.1.82.76
      Fault Module Timestamp: 4c4fd88f
      Exception Code: c0000005
      Exception Offset: 0000215c
      OS Version: 6.0.6002.2.2.0.768.3
      Locale ID: 1033
      Additional Information 1: fd00
      Additional Information 2: ea6f5fe8924aaa756324d57f87834160
      Additional Information 3: fd00
      Additional Information 4: ea6f5fe8924aaa756324d57f87834160
    I'm running Vista Home Premium SP2 64 bit on an AMD quad core with 8GB RAM.
    IE8 32-bit (of course).
    I can't get by this error - If I choose "Close the Program" it loops back after a few seconds with the same message.  So right now, IE8 is unusable.
    Help!
    Jim D.

    Hi, If you received a prompt from Adobe to update Flash Player, when it was finished, did you Reboot(restart) your computer?
    Using IE, go to Tools, Manage add ons. Look for "Show" and under All add ons, find the Shockwave Flash Object and make sure it is Enabled. It should also list it as vs 10.1.82.76(latest version of FP)
    That would be the first thing to check.
    Let me know.
    Thanks,
    eidnolb

  • Can't create a new message.  New message icon missing!

    Starting today, I cannot send new txt messages.  When I go into messages, the top bar that normally has the EDIT and new msg icon is replaced with the search bar.  All I can do is look at msgs that are on my phone and respond to existing ones. 
    I'll try restarting my iPhone 4, but wondered if anyone has seen this before?  (and yes, latest firmware version, etc. on my iPhone 4).

    drbriggs wrote:
    try closeing the app, double click the home button then hold down any app that appears at the bottom, find messages and press the red minus sign.
    That worked.  Now, why didn't I think of that!? 
    Thanks.

  • Import messages after new features are installed

    I try to open Mail and get the following message:
    To use the new features in mail, your existing Mail messages need to be imported into the mew version the first time you use mail. This make a few minutes you won't be able to use mail until the import is finished.
    when I click continue, the preparing to import screen comes up and stays there I thought it just may take some time so I left it all day 12 hours later it still has not moved
    I use Yahoo Premium
    Any suggestions?

    I'm having the same problem, after a migration from a time machine backup. It's just sitting there "preparing for import."
    Did you ever get this solved?
    doug

Maybe you are looking for

  • Error while trying to access dashboards from EPM

    Hi We integrated OBIEE 10.1.3.4 with EPM 11.2 and when we are trying to access dashboards from EPM we are facing the following error : "Invalid or could not find module configuration." Please , help us in solving the above issue. Thanks.

  • Problem with Nokia Camera and Smart Sequence

    Hi, I'm having a problem with Nokia Camera and the Smart Sequence mode. Basically, if you take a picture using nokia camera, and view it in your camera roll, it usually says, underneath the pic "open in nokia camera". Well, if I take a pic using the

  • Network Issues with Macbook Pro Retina will Apple Router solve issues?

    Hi, I just purchased a Macbook Pro Retina 15" and have been having major WIFI/Internet issues.  Slow connections, constant spinwheel of death, half loading pages if the website has a lot of images (Facebook, etc).  Sometimes I have to wait a fair bit

  • Which is the BEST Java Web Service Framework to use?

    Hi all, I'm a beginner to Web Services. I am planning to implement java web services to make the communication between java(Tomcat Server) and C# client. I found list of web service frameworks like, 1. Apache Axis,(POJO,Axiom) 2. JSON-RPC, 3. Java We

  • Where has "Duplicate Project + Used Clips" gone in 10.2 ?

    I want to backup my project and all the media it uses to an external hard drive. In 10.1 I could use, Duplicate Project + Used Clips , but where is that in 10.2?