Create new Movement type - combination of 343 E and 411 E

The situation at client is that the stock is initially in "Sales Order BLOCKED status". It needs to be moved to Unrestricted Own stock. So we are performing 343 E to move from blocked to unrestricted and then 411 E to move from Sales order stock to own stock. So to post these two movement types we get two idocs for each batch. In order to decrease the volume of idocs & idoc error handling we want to create a new movement type that can move from Sales Order blocked stock to unrestricted own stock.
In OMJJ i can make a copy of 343 E but i need to make changes to the "Posting string for quantities - BUSTM" for MAAV or MAV4 and others. I need to know what values need to be updated in T156M especially and also in any other 156* tables.
Thanks

You cannot combine 2 movement types. you can only do what SAP has forseen. OMJJ does not allow to create a movement type from scratch. You can only create a new movement by copy of an existing, hence you cannot create new functionality.
beside of some table settings in T156... tables, there must be the logic in the programs to consider what you try to achieve.
And this is not the case. You are not supposed to change anything on SAP posting strings.

Similar Messages

Steps to create new movement types

Hi Folks,
I need to create new movement type, please let me know the steps that i need to follow.
Thanks,
Regards
Raghavendra

Dear
Please follow the steps in below link and create new Movement type
http://www.sap-basis-abap.com/sapmm015.htm
http://help.sap.com/saphelp_40b/helpdata/ru/fc/6cec6eb435d1118b3f0060b03ca329/content.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/new-movement-type-1857755
Regards
Aamir

Error while creating new Movement Type

All SAP Gurus,
We are creating a new Z movement type by copying the 101 movement type (T code: OMJJ).
But system is not allowing to create a new movement type and giving an error message as 'Specify the key within the work area'.
We are unable to create a new movement type due to this error.
Please help...................
Regards,

How did solve the problem
plz let me know
thanks.

Error In Creating New Movement Type

Hi,
To upload the Consignee Stock, we have created a new Movement Type, say Z01 & Z02 copying the Movement Type 701 & 702.
We are able to upload the Stock using Z01 with correct FI Entry.
While doing the reversal, the following error is encountered:
The mvt type in the reference docmt cannot be converted
Message no. MIGO029
Diagnosis
You want to post a goods movement but the movement type that you want to use for the posting has not been maintained completely in the system.
Possible causes are:
The movement type is not permitted for this transaction.
No subsequent movement type has been defined.
You do not have authorization to post a goods movement using this movement type.
Procedure
Check your screen and field values.
If you do not have sufficient authorization, contact your system administrator.
If a movement type has not been maintained completely, the missing data must be maintained in Customizing for Inventory Management.
Make the appropriate settings in Customizing as necessary or inform your system administrator.
Pls. advise what to do?
Regards,
P K Karn

While exploring the Mov Type 701 & 702, I came to know that 702 is not the REVERSAL of 701 as I normally assume, hence I would be wrong if we think of 702 as reversal for 701.
Also I came to know that reversal is not possible for the documents created thru Physical Inventory i.e. using Mov Type 701.
Basis the above observations, I can conclude that I am going on a wrong track.
But still I am not able to find out the solutions.
I don't to use 501, as it will generate the FI Entries which I don't want.
Hoping some quick answers from you people.
Also would like to request to stop me, if my LOGIC is wrong.
Regards,

Create new mov. type to different stock (unrest. to quality)

Hi expert,
I´m using the movement type 634 (GI rcpt:cust.consgmt) to return material from cust.consg. stock, but this go to unrestric stock. What I need is the movement go to quality stock instead unrestr.
I can make a copy of the 634 using OMJJ, but, my question is where can I specified the type of stock, in this case the quality stock.
Thanks in advance,
Mairo.

Hi Bharat,
Thanks for the information.
I think it could work but I still have a doubt. The 634 mov. type take the material from the cust. consignment stock to the unrestr. stock of the plant.
With the solution you gave me, when I register the "GI rcpt:cust.consgmt" the material will go the quality stock of the plant from the cust. consg?
Thanks in advance.
Mairo

How to created a new movement type?

Hi friends,
We have a scenario which require stock moved from Return to Unrestriced. However, I haven't found any one step movement type to accomplish the job. I have to use two steps transfer, first Return to QI (457) then QI to unrestricted (321), My question is : If it's possible for me to configure a new movement type to transfer stock from return to unrestricted directly. If yes, how to do it?
Thanks in advance for your help.
Linda

Dear Linda,
1) i have never Created new movement type
2) just i am suggesting this, go to OMJJ
3) Now system will ask for movement type, tick it & eneter
4) Next screen do not give anything just enter
5) Now you will get all Movement types
6) just copy existing one & give required number
Coming to other parameters just check with MM experts
Plz wait for experts replies
Regards
kumar

CREATION OF NEW MOVEMENT TYPE

Hi,
I have a query regarding creation of a new Movement Type.
Is there any specific rule to start creating new Movement Type only with numbers starting with digit 9 or we can consider numbers starting with any digits.
Please clarify this as soon as possible.
Thanks in advance.
Thanks & Regards,
Srinivasa M.S
=91-9910077829

Hi,
You can create Movement Type with numbers starting with digit 9 or beginning with Z or X or Y alphabet folllowd by number ( for example: Z01,Z02,Z09 etc)which you can differentiate standard Movement Type with customised Movement Type .
For more check the link:
http://www.sap-img.com/materials/how-to-create-a-new-material-movement-type.htm
Regards,
Biju K

What we need creation of new movement type ? when will be used?

Dear guru,
pls clarity

Hi Sai,
Many a times you want to post value of some transactions to different G/L account for the same material depending on scenarios..like scrap generated at x process...scrap generated at y process etc..
So this will be done through creating new movement types
Regards,
Rohan

Creation of new movement type and transaction code

Hi
As per my business requirement i want to create new movement type 911 in 1M and how to assign to transaction code MIGO and if possible can some body can guide me with configuration.
With regards
G Narendra kumar

Hi Narendra,
1 . To copy a movement type,
select the field Movement type and choose Continue. The dialog box
Define work area appears.
2. In the dialog box Define work area, enter the movement type you want
to copy in the From: field. In the To: field, enter the name of the
new movement type you want to create. To go to the overview of the
selected movement types, choose Continue .
3. Select the movement type you want to copy, and choose Edit -> Copy
as.
Overwrite the selected movement type with the new movement type
(beginning with 9, X, Y, or Z) and copy all dependent entries.
The system copies all control indicators from the reference movement
type to the new movement type.
4. Copy the reversal movement type and enter it in the view
Reversal/follow-on movement types.
5. In SE38, execute the program RDDKOR54 and then give the entry T156 as table name and again execute. Check if the entries 9,Y, and Z* are available in the namespace.
Thanks
Dipak

How to set up an inspection lot for new movement type

Hi All,
I would like to know, how to trigger / set up an inspection lot for a new movement type (ex,Z11) ?
Regards,
PSS

Navigation path:
SPRO --> Quality Management --> Quality Inspection --> Inspection Lot Creation --> Inspection for Goods Movements
For more information refer following link:
[How to create new movement type which move matieral into QI stock?]
Hope this helps.
Thanks!!!

542 movement type copy to new movement type

Hai Experts,
I have one issue. As per standard SAP, Material return from sub-contracting vendor will go to unrestricted use only. as per client requirement stock should go to quality so i thought to create new movement type.
For creating new movement type, i have copied 542 MOVEMENT TYPE.. but there i couldn't be able to put " Movement Type/Update Control/Inspection Lot Origin " With out this control for that movement type. stock willnot move to quality
please suggest me how to solve this problem
answers will be rewarded.

Hi
542 movemnt will not allow you to post to inspections stock.
Even copying the same & creating new one will not help you.
Better transfer the Stock using movment 322 O in transaction MB1B
this will transfer the stock from Vendor Unrestricted use to QI stock.
Now perform the 542 movment this will transfer the Stock into QI stock in the Plant.
If you need to do this using 542 or a copy of 542 then its not possible as The inspection lot origin for a movement type is defined by SAP and cannot be changed.
Thanks & Regards
Kishore

New mov type

hi all
if anybody created new mov type which is not available in std sap , tell me for which u created and what are the fields u put in that mov type

Hi
To create New Movement types T-code OMJJ and Companies may request a new movement type to differentiate between the inventory posting transaction. For example, 551 scrap movement type. Some company may request to have it as 551 for Internal Scrap and Z51 for External Scrap.
Copy, Change Movement Types

Purpose of new movement type

Hi There,
What is the purpose of creating new movement type and what kind of situvation newmovement type will be recommned.
Please advise with couple of examples.
Onemore thing where to find and how to find who has developed the Z reports (nothing but developed person name),please explain indetail.
Appreciate your early action

Hi,
New movement type creation. if you wnt use the particular movement type for only single trasation. or
if create any Z trasation & want to use goods movements then u can create new movement type. or standard seetings in SAP movements need to be changed the you can create/copy the existing movement type and do the modification & assign to particular t-code.
Z transation report:
SE93. Enter Z* put F4 .
SAM
Edited by: Saminathan Gopalan on Jun 28, 2010 9:50 AM

Create a new Movement Type wrt 101

Hello colleagues ,
I want to create a new movement type same as 101 , and want that when I will do goods receipt with reference to Purchase order instead of Movement type 101 my new movement should be selected by the system.
I know how to copy the new movement but when I am doing GR wrt PO 101 is selected and not the new movement ?
Please help me !
Thanks a lot !
regards
Shashank

Hello All ,
These solutions will work fine as such !
But see this :
If I do VL02N for a Delivery (This is created wrt to STO ) and in Customizing set it one step procedure .
Then the default behaviour of system is it will do first 647 Mvt then this will be followed by 101 Mvt
when the PGI will be done.
Now I copy the Mvt type for 647 as X11 and for 101 as Y11 .
So now when I do VL02N , the system should post X11 and Y11 , and not 647 and 101 ??
Can you please help me further ?
Thanks for the contribution !
Regards
Shashank

PURPOSE OF CREATION OF NEW MOVEMENT TYPE

Hello Experts,
Can you please tell me the purpose of creating a new movement type with the description.
Thanks and Regards
Nilu S.

Hi,
Movement type determines the treatment of any Stock in terms of Qty & Value. SAP has provided the standard MVt type for use in different business scenario.
How a Mvt Type Works is important to understand the requirement of new Mvt type -
a. in material master we are assigning the Val. Class, We are assigning the GL a/c with Valuation class in combination with General account modifier in OBYC like GBB >> VBR>> ValClass>> GL A/c.
b. Each valuation class is linked to multiple General account modifier Key and GL a/c (as per our business requirement).
c. Each movement type is assigned with Account modifier key in IMG Customising.
So when ever we enter a material & Mvt type in any transaction system determine the GL A/c to be for Automatic posting through Account modifer Key (From OMJJ & OBYC).
So you can see, there is limitation of GL assignment for automatic posting in OBYCfor each business scenario.
if requirement of diff. accounting arises for a material with same valuation class, we need to Create new Mvt type & Account modifier key. This new Account modifier key will be linked to New GL in combination with Val. Class.
Hope above explanation satisfy your query.
Regards,
Ranjan Kumar

Create new Movement type - combination of 343 E and 411 E

Similar Messages

Maybe you are looking for