Create new order status and line status in oracle EBS

Hi,
I want to create new order status,line status (Like Booked, Entered etc.) and also want these in istore .
Please help me out.please provide the navigation path to create this.
Thanks
Mark
Edited by: Mark on Jun 30, 2011 5:03 PM

Have you check in the online documentation for Ebiz, and metalink.?

Similar Messages

  • How to cancel the sales order - header and line status are in Entered Stage

    Dears,
    I have some sales order to be cancelled in which the header and line status are in *"Entered"*. I am not able to cancel these sales order.
    Also note that these orders are for maintenance service.Once i book these orders the lines will change to closed status.
    So it is not possible to book and cancel the lines.
    Kindly me to resolve this.

    926530 wrote:
    Boss,
    If i do Action-->cancel on header, it just makes the qty to zero.But the header and line status still showing as entered.It will not cancel the order.
    The problem for me is that these lines are coming in my monthly reports. This is what your question says...be more specific as what is your issue..which in turn is your problem
    How to cancel the sales order - header and line status are in Entered Stage
    Coming to your Action-->cancel...as far as i know ...the header status will change to canceled..
    unless until you have some processing constraints in place...which is stopping you...
    HTH
    Mahendra

  • MM02 Sales view - Create new Cross distribution chain material status

    Dear Gurus,
    I need to CREATE new:
    - Distribution chain specific material status
    - Cross distribution chain material status
    Can anyone please help urgently on this?
    Many thanks for your help
    Kind regards
    Chris

    IMG > Logistics general > Material Master > Settings for Key Fields > Data Relevant to Sales and Distribution > Define Sales Statuses

  • System status and user status in Line Item Reports

    Dear PS-friends,
    I have to extend the CI CI_PROJ with some new fields. These fields should be shown in diverse Line Item Reports (CJI3 u2026).
    I know how to get these customer fields into the field catalog for the reports (maintain include table CI_RKPOS, EXIT_SAPLKAEP_001 and ViewCluster V_TKALV).
    Now our customer wishes that 2 of the new fields are: system status and user status. The status should be shown in CJI3 as a concatenated field as you see it in CJ20N.
    In CN42 there is the column system status as a standard column. But I cannot find the structure CNJ_STAT included in V_TKALV for Line Item Report Object=PD.
    Has anybody an idea how it works to show the system status and user status in Line Item Reports.
    Thanks in advance!

    Problem is solved.
    I wrote a function module using FM 'STATUS_TEXT_EDIT' and concatenated line and user_line.

  • How to get system status and user status of service order

    Hi,
    I want to show user status and system status for service order in my report and i am using CRM_ORDER_READ function module to read the status, but it is returning lot of status records, could anyone please suggest how to get the system status and user status for service order.
    I did not find any clue for how to get user status, i can see the user status when i open the transaction using CRMD_ORDER.
    Regards,
    Kamesh Bathla

    Hi,
      Go to CRM_JEST table give your service order guid and get the status, pass this status into TJ02. You will get the status of your order.
    Regards
    Srinu

  • Fetching the sales order data using both system status and user status

    Hi,
    Could any one tell me how to fetch sales orders using both system status and user status.
    My requirement is to fetch sales order data in a report where the user enters the system status and user status in the selection screen fields.
    For example i need sales orders where the system status is I1002 i.e. OPEN and user status is E0002 (status profile CMSCON0) that is In Process
    Early replies are appreciated.
    Thanks
    Tanveer

    Hi,
    The system status and user status are stored in CRM_JCDS & CRM_JEST tables you can get the all the order GUID on particular status further pass the order GUID in table CRMD_ORDERADM_H to get transaction ID.
    Regards,
    Dipesh.

  • How to fetch service order with partucular system status and user status

    Hello All,
    How to fetch service orders with specific system status and user status.
    thanks

    I want tables or views from where I can fetch service orders. I have to design ALV report based on this.
    I want to fetch released service orders with status INIT and RENT.
    Here, SYSTEM Status = Released and
             USER Status     = INIT
                                        RENT
    So is there any function module available for the same.....

  • System status and user status Priority

    Hi All,
    We have system status and user status for the production order, I would like to know which has higher priority.
    E.g In system status some business activity are not allowed but at the same time for user status those activites are active, then which status has high priority.
    Regards,
    Ranjan

    Hi,
    As per my understanding both the status work together. If User status forbids a business transaction and system status allows it, then also the business transaction cannot be carried out.
    Also if system status forbids a business txn and user status allows that, then also you wont be able to carry out the txn.
    Both work with "AND" condition.
    Regards,
    Rohit.
    Added: you can try it by creating a User status profile. Allow Goods Movement to CRTD status. Now dont release the production order, only save it. Then try issuing goods (261), the system will block you.
    Now, other way round, forbid GR without confirmation. Though System Status allows GR without CNF or PCNF status, but the user status will forbid the transaction.
    Hope the example helps.
    Regards,
    Edited by: Rohit Chauhan on Jun 5, 2009 9:09 AM

  • IO system status and user status

    Hi all,
    Could you please tell me where the link between IO sys and user status.
    Thank you.

    Hi
    System status and User status:
    System Status
    o        The system sets a system status informing the user that the system has executed a certain business transaction for an object.
    o        You can only influence this status by executing a business transaction that changes the system status.
    o        If you release an internal order, the system automatically sets the Released system status.
    User Status
    o        You can set a user status in addition to the existing system status.
    o        You specify the user status in a status profile, which you create for each order type in Customizing.
    o        You can specify and activate any number of user statuses.
    o        In a production order you can simultaneously
    The system status and the user status influence the business transactions in the same way.
    The status profile allows you to:
    o        Define the user status and document its functions with a corresponding long text.
    o        Assign a status number that specifies the order in which the system reaches the user statuses.
    o        Define an initial status, which is then automatically set when an object is created.
    o        Determine that a user status is automatically set when you execute a business transaction.
    o        Permit or forbid specified transactions, if a status is active.
    VVR

  • Difference between system status and user status.

    Can someone explain to me the difference between system status and user status in details

    Hi,
    As you mentioned there are 2 status can be maintained for documents like Equipment Master, Notification, Maintenance Order & other important business documents.
    In case, client feels that system status is not enough to capture the details of the object, then user status can be used.
    System statuses will be updated automatically based on business transactions which will be done on SAP.
    For example, once the equipment is created, System status would CRTD (Created). If you install the same to some superior equipment or FL, then status would be INST (Installed).
    If you keeping that equipment in Spare, then for that, you have to maintain separate User Status like AVLB (Available in Stock / Spare) so that through IH08, by using User status, you can the report which is available as spare.
    These user status as per the name, should be updated by the user manually.
    Regards,
    Maheswaran.

  • Sales order no and line item no in account assignment tab of line item no.

    Hi All,
    When we display a sales order and go to line item --> Account assignment tab --> we can see sales order no and line item no in that screen. We want to know from where this existing no. in that field is populating from.
    We want to know this as we want to check feasibility of changing sales order and item no to maintenance contract no and line item no. ( Maintenance contract we have to pick from notification)
    If anybody has any idea about this do let me know as this is urgent requirment.
    Effort will be rewarded.
    Thanks in advance.
    Edited by: Satish Bharambe on Jul 4, 2008 10:38 AM

    Hi Satish,
    You mean Accounting assignment tab-->In Settlement rule details
    If yes the order number which is coming in that field Sales order and for which sale order you are looking that details both are the same numbers(i.e Nothing but sales order number).
    When you create sales order system will give number of the sales order the number will come in this place.
    I hope it will help you,
    Regards,
    Murali.

  • What is the need of creating New order type in PO

    Dear Experts,
                 I have a doubt in MM, what is the need of creating New Order Types?  Please explain with Business scenario.  Thanking you,
    Regards,
    Elangovan.A

    Hi Elangovan
    Whenever you have a doubt like this...
    --- just verify the config settings for your parameter (order type here).
    ---Also check whether authorizations can be given for this ?
    ---Do you need it for specific analysis ? Are there standard reports/listings available ?
    So, some of the uses of order type are:
    1) What are the parameters controlled by order type ?
    It controls the number ranges and screen layouts etc. So, if you want to have different set of number ranges and different screen settings, then you may need a new order type.
    2) Authorizations can be controlled with order type.
    3) You can also use it in analysis/listings
    Best regards
    Ramki

  • External system Sales Order no and Line Item no in to BAPI_HU_CREATE

    Hi Friends
    Packing is done and Handling units are created in External System.
    For this requirement SAP ECC has to update Handling Units creation and  Materials Packing in to HU with reference External System Sales Order no and Line Item no.
    Could you please advice how & where to input External system Sales Order no and Line Item no in to BAPI_HU_CREATE Function Module while creating Handling Units in SAP ECC system.
    Thanks in Advance.
    SR

    Hi Guru
    Please help on this requirement.
    Thanks
    Ravi

  • Order types, why do we need to create our order types and not use the stand

    HI
    Order types, why do we need to create our order types and not use the standard ones during implementation.

    Hi Raj,
    Well there is no hard and fast rule that you have to copy nad create a new order type. Its just to meet our own requirements that we copy the standard and make the changes if required to meet our business needs.
    And by this way we keep unchanged the standard order type for further use.
    If you are sure that the standard order type satisfies your need you can directly use that only.
    I hope this clarifies the issue.
    Do reward if find useful
    Regards,
    Abhi

  • How to get system status and user status ?

    how to get system status and user status for the given production order?
    In which PP table we can
    find these?
    Thanks&Regards
    Satish

    Hi Ram,
    Use the FM "STATUS_READ" to read both the system and user statuses for an Order.
    Alternatively, the following tables store the user and system status info:
    JSTO- Status object information
    JEST- Individual Object Status
    Hope this helps.
    Let me know if u need further information.
    Regards,
    Sonal

Maybe you are looking for