Create new page with every excel line

Hi Everyone,
I have a InDesign document linked up with a excel document. My question is: How do I make indesign create a new page every time a new excel line is added? I want to create an individuel page for every line.

Or, you could create a paragraph style that has a Keep Option that specifies the paragraph start on next page and you can place the .csv or .txt file normally, using that paragraph style.

Similar Messages

Creating new page with new parent tab

Does this happen to anyone else? When I try to create a new page that will have a new parent tab and standard tab in a 2-level tab setup, it never seems to work right. I end up having to dele the new parent tab and standard tab I created while creating the new page. Then once the page is created, I go into Shared Components -> Tabs, and create a new Parent Tab and assign it to this new page. Seems like a crazy way to have to do it.
I know this sounds crazy and it is hard to explain the issue, but anyone who has had this problem with creating a new page with new 2-level tabs will understand what I am talking about.
Can anyone point me to an explanation on how this should be done? I know I must be missing something.
Thanks,
John

I've recently had to muck around with the 2 level tabs aswell. There are some things making this rather difficult indeed.
What i'd do when creating a new page you want to have under a new tab, but also with a new parent tab, is to create it with only a new STANDARD tab. Don't create a new parent tabset. All parent tabs are in the same tabset, and if you create a new tabset you'll effectively see only this new parent tab + tab on the page you created.
So unless you want the page to be on an absolutely new set of tabs, you'll probably just want the page to be on a new top-level tab with under that a new standard tab. Like so:
<NEW PARENT> | parent 1 | parent 3 | parent 4
<NEW TAB> |
To achiece this, you'll need a new standard tab set. You can create this when creating the page. The standard tab set is the set used for you lower level tabs, so obviously we do need a new one.
As for the parent set which you can choose upon page creation, choose the already existing parent tab set. This set contains all your already existing parent tabs, and you wish to add one for display.
When you finish creating the page and run it, you'll see that the standard (lower level) tab is there, and is set to active, but your parent tab is not there.
Go to Shared Components > Tabs. Select the "Manage Tabs" tab there. You can notice your new set there, but notice the striped outline of it. This tab has no parent tab for it! And this is the problem with tab creation in 2-level tabs: you can make a new STANDARD tab and tabset, and define a parent tab set OR create a NEW tab set with tab. Both options fail us: what we want is a NEW parent tab in an existing parent tab set!
So to fix our problem, from the manage tabs tab click on "Manage Parent Tabs", found on the right hand side of the screen in the region "Parent Tab Tasks".
This'll bring you to a magical new tab within the tab components. It's a mystery to me why it has to be hidden like this, and makes it a real pain to use. On this page you can manage your parent tabs (the only place to do so actually...). Here you'll see there is no parent tab for your page (again), but here you can create a new parent tab from the right hand menu "Parent Tab Tasks" > "Create New Parent Tab". Enter a label, and choose your existing parent tab set as parent tab set. Don't create a new set. As for target, refer to your new page again.
However, we are not done yet. You are returned to the "Parent Tab Management" page. You new parent tab will be shown there, but when you run your page, the parent tab will not be set active yet.
To fix that, go back to the "Parent Tab Management". Select your parent tab so you go to it's details. Firstly, give it a new sequence number, otherwise it'll be shared with one (the parent tabs are created with sequence nr 10, so most probably on a shared position with your first parent tab).
Then turn your eyes on the "Current on Standard TabSet" list item. It'll have an option selected, but take a good look: it'll be the same name as your parent tab. From the options, select your new Standard tab set (the lower level set) which holds your new page. Then apply your changes and run your page: both your parent and standard tab will be there and highlighted. Yay!

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

Hi Leo22,
Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
Jeremy L.
National Instruments
Jeremy L.
National Instruments

How do I create photo page with blow up images on click?

I need some help trying to create a web page of photo thumbnails with blow-up larger images:
1) I want to create a contact sheet type of web page of multiple photo thumbnails.
2) When you click the photo it opens into a small window or "blow-up" version of the thumbnail. (Clicking the thumbnail does NOT take you to a new page with the full size image).
3) The blow-up photo has a circle and X that will close the blow-up window.
I've already figured out how create pages of thumbnails that will take you to a new page with the full size image. I'm trying to create the effect where you never leave the main page, the thumbnails just blow-up into small windows that can be closed again.
Apple uses this effect a lot with photos and movie clips on their page. An example of what I am trying to do can be found on the iLife/iPhoto/MobileMeGallery info page at Apple.
If you look to the right just under the main large banner images, there is a grey box titled "iPhoto Showcase." If you click one of the thumbnails there, the picture blows out to a larger size of the image, but doesn't take you to another page. The blow-up image has a little circle and X at the top left to close the window. Main page is still visible behind the blow-up window.
I'm using a fairly new MacBook with OS 10.5, iPhoto and iWeb '08. I also have Aperture 2.0. I don't have a .Mac or MobileMe account yet. I'm a recent convert from the Darkside, so right now I use google's Picasa Web Albums and google's website creator for my site. If I can get this to work, I'll make the switch MobileMe once the early .Mac conversion kinks get worked out.
Thanks,
TDizzle...

Cyclosaurus--
That's the effect that I'm looking for. I've read through the instructions on Cabel's website (thanks for the great links!) But I'm afraid I'm still a bit of a novice with website creation and editing. I liked your iWeb examples, so I have a few follow-up questions about how to integrate this with iWeb.
1) Do you use iWeb and .Mac/MobileMe to publish your site? I already own a domain and have been using google's online page creator tools to create some very basic pages. For picture pages, I just put up links to my Picasa web albums. But the google user interface and options (no FTP upload) are even more limited than iWeb and .Mac. With 20GB of storage, plus the other features and ability for integration, MobileMe sounds enticing for the price.
2) At what point do you add the code to the pages in the edit and publish process? What are the exact steps you use to publish? (Create and edit in iWeb, add html code, publish to folder or publish straight to .Mac/MobileMe, etc.)
3) If you make changes to pages in iWeb, do you have to keep adding the code to the pages and repeat the steps from above question?
4) What app do you use to edit the html code? No html edit function in iWeb, so I tried opening the "page.html" files in TextEdit but the page just looked like a web page. No code. How do I get the text of the html code to open in TextEdit or another app?
5) Do the lines of code (2 lines in "head" and 1 line in "body") need to be added to every page that I want to use the effect?
6) How do you upload the two FancyZoom folders to a .Mac/MobileMe account site? And where exactly do they need to be placed?
Thanks,
TDizzle...

How do I create photo page with blow up images?

I need some help trying to create a web page of photo thumbnails with blow-up larger images:
1) I want to create a contact sheet type of web page of multiple photo thumbnails.
2) When you click the photo it opens into a small window or "blow-up" version of the thumbnail. (Clicking the thumbnail does NOT take you to a new page with the full size image).
3) The blow-up photo has a circle and X that will close the blow-up window.
I've already figured out how create pages of thumbnails that will take you to a new page with the full size image. I'm trying to create the effect where you never leave the main page, the thumbnails just blow-up into small windows that can be closed again.
Apple uses this effect a lot with photos and movie clips on their page. An example of what I am trying to do can be found on the iLife/iPhoto/MobileMe Gallery info page.
http://www.apple.com/ilife/iphoto/#mobilemegallery
If you look to the right just under the main large banner images, there is a grey box titled "iPhoto Showcase." If you click one of the thumbnails there, the picture blows out to a larger size of the image, but doesn't take you to another page. The blow-up image has a little circle and X at the top left to close the window. Main page is still visible behind the blow-up window.
I think this post mentions what I'm trying to do, but they seem to be having problems getting it to work. I need help creating this effect from scratch.
http://discussions.apple.com/thread.jspa?threadID=1609046
I'm using a fairly new MacBook with OS 10.5, iPhoto and iWeb '08. I also have Aperture 2.0. I don't have a .Mac or MobileMe account yet. I'm a recent convert from the Darkside, so right now I use google's Picasa Web Albums and google's website creator for my site. If I can get this to work, I'll make the switch MobileMe once the early .Mac conversion kinks get worked out.
Thanks,
TDizzle...

Cyclosaurus--
That's the effect that I'm looking for. I've read through the instructions on Cabel's website (thanks for the great links!) But I'm afraid I'm still a bit of a novice with website creation and editing. I liked your iWeb examples, so I have a few follow-up questions about how to integrate this with iWeb.
1) Do you use iWeb and .Mac/MobileMe to publish your site? I already own a domain and have been using google's online page creator tools to create some very basic pages. For picture pages, I just put up links to my Picasa web albums. But the google user interface and options (no FTP upload) are even more limited than iWeb and .Mac. With 20GB of storage, plus the other features and ability for integration, MobileMe sounds enticing for the price.
2) At what point do you add the code to the pages in the edit and publish process? What are the exact steps you use to publish? (Create and edit in iWeb, add html code, publish to folder or publish straight to .Mac/MobileMe, etc.)
3) If you make changes to pages in iWeb, do you have to keep adding the code to the pages and repeat the steps from above question?
4) What app do you use to edit the html code? No html edit function in iWeb, so I tried opening the "page.html" files in TextEdit but the page just looked like a web page. No code. How do I get the text of the html code to open in TextEdit or another app?
5) Do the lines of code (2 lines in "head" and 1 line in "body") need to be added to every page that I want to use the effect?
6) How do you upload the two FancyZoom folders to a .Mac/MobileMe account site? And where exactly do they need to be placed?
Thanks,
TDizzle...

Clicking "page from template" does not allow me create new pages

I stared designing a site with the trial version of CS4. Of course it involved a lot of trial and error, creating a page and canceling it again etc. At last I was able to design the index page and a few other pages, but suddenly just about 7 days into the trial period, the template started looking different; not displaying the images and displaying the home page article in an improper way. I also discovered that I could not create new pages by selecting file\new. When the new document dialogue page opens and I select "page from template" and then select a site I am working on, nothing shows in the items list. I only see the message "no items". Moreover, the "create" (new page) button is no more a click-able area.
I even tried it by proceeding as if I wanted to design a new site. I click file\new\page from template\the site, but when it comes to the stage where I should select "2 column liquid, left sidebar, header and footer" after clicking “page from template” I don't see anything in the items column. It only tells me "no item."
I thought this problem was due to the fact that I was using the trial version and that the trial version was limited in the number of new pages I could create. So I bought the full version. Alas! I discovered that changed nothing. Right now am stuck. Do you have any suggestion?

I think you're are confusing DW Templates with CSS Page Designs and Starter Pages.
Templates are a DW proprietary device. They permit you to have sitewide elements such as common menus, headers and footers on all your pages along with Editable Regions for page specific content (i.e. the stuff that changes on every page).
DW Templates looks like this (notice the Template Editable Comments):
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />

<title>Untitled Document</title>



</head>
<body>
My Page Specific Content Goes here

</body>
</html>
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

I can't delete, move or create new pages.

Hello,
I have catalogue (390 pages)
Today i cant delete, move or create new pages.
When i delete, move or create new pages - my Indesign CS5.5 program "freezes"
Only with CTR: + ALT + SHIFT i can stopped my program.
Аfter reopening everything was as before!
I try to export like a *.idml file, but my program crashes! Every time!
My OS is: Windows 7
Indesign CS5.5
Please help me
Thank you!
With kind regards,
Botev Plovdiv

Is there anything at all related to this freeze in the Windows Event Viewer?
Are you able to add, remove, or move pages in a new document? Are you able to export a new document to .idml?
Yes, it is able!
It sounds like there may be a corrupt bit of text, or an image in the file. It may be possible to isolate a page, and then an object, using "Divide and Conquer."
Start with a copy of the file, for safety. Try to export the front half and the back half separately. If either half crashes, divide it in half aand try to export those halves. Repeat the process until you have isolated a page that crashes. Now remove half the objects from that page and try to export. If it works, put those back and remove the other half and try again. Repeat as above until you isolate an object.
Thank you, I will try!
After that i will back to you with my comments!
Thank you again, Peter!

Infinite loop creating new page due to column header overflow.

i am getting an error and some pages "Infinite loop creating new page due to column header overflow. " --
using report builder 9, i have a fairly simple report - that contains 4 subreports.
for some pages i get the error - it seems if there is more data than would fit on 1 page.
smaller pages work fine.
the subreports are all simple queries and dumps....
containing page header, column header, detail sections.
page header has just a text bar of the name of the section.
column header has the field names
detail section has the data - 1 row for each row in the recordset.
nothing i do seems to change getting "Infinite loop creating new page due to column header overflow. " on a page with more than 15-20 records returned.
any ideas would be appreciated.

Try these links if you are still having the issue:
http://community.jaspersoft.com/questions/543302/receive-infinite-loop-creating-new-page-d ue-column-header-overflow-exception
http://community.jaspersoft.com/questions/500177/infinite-loop-due-page-header-overflow

How do I make it so my client can edit Links in business catalyst when they create new pages?

Okay so essentially I have built a site in Muse uploaded to business catalyst and I've setup a site template so that the client can create new pages as each new course arrives, but how do I get the link from the homepage to link to the new page? basically I need the link to be editable.
What would be ideal is a kind of portfolio layout where there is a thumbnail and a new page but for my client to be able to add a new project adn it would create a thumbnail on the homepage and a new page that he can edit. Does anyone know of something like that possible in Business catalyst?

Hi
Editing with Business Catalyst only works with image or text editing , we cannot add new page or page items using in browser editing.
However, you can manage the site from BC end when your client and login to admin and add pages, modify etc, but if you re-publish the site from Muse then then changes will be overwritten.
Thanks,
Sanjit

Error while trying to create new assignment with supervisor through API

Hi Experts,
I'am trying to create new assignment with supervisor for employee, but i'am facing this error:
=============================================================
ORA-20008: Error While Create new assignment..-20001
ORA-20001: The supervisor assignment that you have entered is invalid.
Please check that you have entered the supervisor,
that the supervisor assignment belongs to this supervisor and that the assignment is effective.
ORA-06512: at line 198
=============================================================
This is my script, (Oracle EBS 12.1.1)(DB 11):
DECLARE
v_user_id NUMBER;
v_res_id NUMBER;
v_res_appl_id NUMBER;
v_org_now_no_manager_warning BOOLEAN;
v_spp_delete_warning BOOLEAN;
v_other_manager_warning BOOLEAN;
v_tax_district_changed_warning BOOLEAN;
v_entries_changed_warning VARCHAR(4000);
v_person_id per_all_assignments_f.person_id %TYPE;
v_business_group_id hr_all_organization_units_tl.organization_id %TYPE;
v_people_group_id per_all_assignments_f.people_group_id %TYPE;
v_object_version_number per_all_assignments_f.object_version_number %TYPE;
v_special_ceiling_step_id per_all_assignments_f.special_ceiling_step_id %TYPE;
v_group_name pay_people_groups.group_name %TYPE;
v_ass_effective_start_date per_all_assignments_f.effective_start_date %TYPE;
v_effective_start_date per_all_assignments_f.effective_start_date %TYPE;
v_effective_end_date per_all_assignments_f.effective_end_date %TYPE;
v_assignment_id per_all_assignments_f.assignment_id %TYPE;
v_sup_assignment_id per_all_assignments_f.assignment_id %TYPE;
v_supervisor_assignment_id per_all_assignments_f.assignment_id %TYPE;
v_job_id per_jobs.job_id %TYPE;
v_grade_id per_grades.grade_id %TYPE;
v_location_id hr_locations_all.location_id %TYPE;
v_payroll_id pay_all_payrolls_f.payroll_id %TYPE;
v_pay_basis_id per_pay_bases.pay_basis_id %TYPE;
BEGIN
v_user_id := FND_GLOBAL.user_id ;
v_res_id := FND_GLOBAL.resp_id ;
v_res_appl_id:= FND_GLOBAL.resp_appl_id;
FND_GLOBAL.apps_initialize(v_user_id, v_res_id, v_res_appl_id);
BEGIN
SELECT organization_id
INTO v_business_group_id
FROM hr_all_organization_units_tl
WHERE name = 'Vision University'
AND language = 'US';
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20000,'Error While Retrieving (Business Group ID) Info...'||SQLCODE||' '||SQLERRM);
END;
FOR R IN (SELECT * FROM xx_assignment) LOOP
BEGIN
SELECT assignment_id , ass_f.object_version_number
INTO v_assignment_id , v_object_version_number
FROM per_all_assignments_f ass_f, per_all_people_f p_f
WHERE ass_f.person_id = p_f.person_id
AND ass_f.business_group_id = p_f.business_group_id
AND ass_f.business_group_id = v_business_group_id
AND p_f.employee_number = R.employee_number
AND TRUNC(p_f.effective_start_date)= TRUNC(ass_f.effective_start_date)
AND TRUNC(p_f.effective_end_date) = TRUNC(ass_f.effective_end_date);
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20001,'Error While Retrieving (Assignmet_ID) for employee..'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT job_id
INTO v_job_id
FROM per_jobs
WHERE trim(lower(name)) = trim(lower(r.employee_job))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20002,'Error While Retrieving (Job_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT grade_id
INTO v_grade_id
FROM per_grades
WHERE trim(lower(name)) = trim(lower(r.employee_grade))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20003,'Error While Retrieving (Grade_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT location_id
INTO v_location_id
FROM hr_locations_all
WHERE trim(lower(description))= trim(lower(r.employee_location))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20004,'Error While Retrieving (Location_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT payroll_id
INTO v_payroll_id
FROM pay_all_payrolls_f
WHERE trim(lower(payroll_name)) = trim(lower(r.payroll_name))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20005,'Error While Retrieving (Payroll_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT pay_basis_id
INTO v_pay_basis_id
FROM per_pay_bases
WHERE trim(lower(pay_basis)) = trim(lower(r.pay_basis))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20006,'Error While Retrieving (Pay_Basis_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT person_id
INTO v_person_id
FROM per_all_people_f
WHERE employee_number = r.supervisor_number
AND business_group_id= v_business_group_id;
SELECT assignment_id
INTO v_sup_assignment_id
FROM per_all_assignments_f
WHERE person_id = v_person_id
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20007,'Error While Retrieving (Assignmet_ID) for supervisor..'||SQLCODE||' '||SQLERRM);
end;
BEGIN
hr_assignment_api.update_emp_asg_criteria(p_effective_date => TRUNC(SYSDATE),
p_datetrack_update_mode => 'CORRECTION',
p_assignment_id => v_assignment_id,
p_validate => FALSE,
p_called_from_mass_update => NULL,
p_grade_id => v_grade_id,
p_position_id => NULL,
p_job_id => v_job_id,
p_payroll_id => null,--v_payroll_id,
p_location_id => v_location_id,
p_organization_id => v_business_group_id,
p_pay_basis_id => v_pay_basis_id,
p_segment1 => NULL,
p_segment2 => NULL,
p_segment3 => NULL,
p_segment4 => NULL,
p_segment5 => NULL,
p_segment6 => NULL,
p_segment7 => NULL,
p_segment8 => NULL,
p_segment9 => NULL,
p_segment10 => NULL,
p_segment11 => NULL,
p_segment12 => NULL,
p_segment13 => NULL,
p_segment14 => NULL,
p_segment15 => NULL,
p_segment16 => NULL,
p_segment17 => NULL,
p_segment18 => NULL,
p_segment19 => NULL,
p_segment20 => NULL,
p_segment21 => NULL,
p_segment22 => NULL,
p_segment23 => NULL,
p_segment24 => NULL,
p_segment25 => NULL,
p_segment26 => NULL,
p_segment27 => NULL,
p_segment28 => NULL,
p_segment29 => NULL,
p_segment30 => NULL,
p_employment_category => NULL,
p_concat_segments => NULL,
p_grade_ladder_pgm_id => NULL,
p_supervisor_assignment_id => v_sup_assignment_id,
p_people_group_id => v_people_group_id,
p_object_version_number => v_object_version_number,
p_special_ceiling_step_id => v_special_ceiling_step_id,
p_group_name => v_group_name,
p_effective_start_date => v_ass_effective_start_date,
p_effective_end_date => v_effective_end_date,
p_org_now_no_manager_warning => v_org_now_no_manager_warning ,
p_spp_delete_warning => v_spp_delete_warning,
p_entries_changed_warning => v_entries_changed_warning,
p_tax_district_changed_warning => v_tax_district_changed_warning,
p_other_manager_warning => v_other_manager_warning);
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20008,'Error While Create new assignment..'||SQLCODE||' '||SQLERRM);
END;
END LOOP;
COMMIT;
END;
Thank you & Best Regards

I think this is essentially saying that the Supervisor Assignment is wrong or no longer effective. Looking at your SQL to fetch the Supervisor Assignment there are a number of potential issues. This is what you've currently got:
SELECT person_id
INTO v_person_id
FROM per_all_people_f
WHERE employee_number = r.supervisor_number
AND business_group_id= v_business_group_id;
SELECT assignment_id
INTO v_sup_assignment_id
FROM per_all_assignments_f
WHERE person_id = v_person_id
AND business_group_id = v_business_group_id;
Potential Problems/Clarifications
1. What is r.supervisor_number, what does it contain and how is it derived? I can't see that anywhere else in the block...
2. Is there a chance that r.supervisor_number is referencing an employee who has left, ie, now an ex-employee?
3. The SELECT statement that fetches the assignment_id does not perform any date-effective restrictions, which means you might be lucky enough to fetch the person's current assignment. But you might also fetch an old or future-dated assignment.
4. The SELECT statement that fetches the assignment_id does not restrict the type of assignment, so if this manager has applied for a job (ie, they have an applicant assignment) or some other type of non-employee assignment you might be picking that up.
This would work better for you:
SELECT paaf.assignment_id
INTO v_sup_assignment_id
FROM per_all_people_f papf
,per_all_assignments_f paaf
WHERE papf.employee_number = r.supervisor_number
AND papf.business_group_id = v_business_group_id
AND nvl(papf.current_employee_flag, 'N') = 'Y'
AND trunc(sysdate) BETWEEN
papf.effective_start_date AND papf.effective_end_date
AND papf.person_id = paaf.person_id
AND paaf.assignment_type = 'E'
AND paaf.primary_flag = 'Y'
AND trunc(sysdate) BETWEEN
paaf.effective_start_date AND paaf.effective_end_date;
If it doesn't return a row it means that the supervisor (or whatever employee is returned by r.supervisor_number) is not active as at sysdate and cannot be used. Note that this SQL only applies for employees. If you can have Contingent Workers as supervisors in your implementation then this needs tweaking.
Does that help?

Creating new pages in iWeb

Could someone assist please with creating new pages within a page - that is if I need to follow from
a previous page with in context stuff, but I don't want a NEW page with a NEW page heading at the top.
I just want to put more stuff up under an existing page heading and using an arrow to go to new page
all in the same section. Rather than filling the top with new page headings. Sorry if I cant explain it better! Thanks - Gareth

This works for your site because it is mostly photos and you have used the Photo Page, fine. However, what you need to remember is that many people just have ordinary websites without photos who might still want to use sub pages and this method will not work for them because there are not forward and back links.
I have sub pages on my own website and basically, I created an About Us page. I have some text there, but then I have something that says find out more about these people. I did not want these other pages displayed in the main nav bar, so I took them all out and what I have done on the About Us page is use a shape with the name of the person in it and created a hyperlink to that page. You click on the relevant shape and this takes you to the page for that person - on this page I have then created a shape with Back and Forward in it - the Back hyperlink if clicked on takes you back to the About Us page and the Forward hyperlink takes you to the page for the next person etc.
If you want to create sub pages on an ordinary web site, then this is how you need to do it - you need the links on the pages that are not in the main nav bar to be able to get around the site.
You don't have those links on your site, but as it is mainly photos then this does not matter and works for you, as you go from gallery to gallery. This will not work for everyone though - horses for courses! What works for one might not work for another.

How to create new page in adobe form.

how to create new page in adobe form.

Hi
First Go To Layout.
On Hicherchy Platte , rightclick on Subform and select option new body page.
This way you can create body page for the particular subform.
if you want to create master page , right click on page 1 and select New master page.
Hope this will helpful to you.
Rewards if useful.
With Regards
Nikunj Shah

Can not create new page from template

I have been working on a new site for the last couple of
weeks and have created several pages using a basic template.
All of the child pages of this template still update when
changes are made to it, however I can no long create new children
from this template.
Any ideas as to what the problem might be.
THanks
Clint

> It is basically just creating a copy of my template, and
not linking to it in
> any way.
> This allows me to change any section of the html.
my guess is that you are opening the .dwt template file and
doing a "Save
As". That page is not a "child" page of the template.
>
> I want to be able to create new pages off this template
and have it work like
> all of the first pages I created.
dw menu-->File-->New
in the new files dialog box, click the Templates tab
from list in left, click This Site Name
from list in right, pick This Template
make sure x is in box to Update if template changes
click okay
save file with filename you want to within this local site
folder.
add content to within the editable areas
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Use a Custom Page Layout When Creating [[new pages]] in Enterprise Wiki

I have followed a few different blogs and I've been able to create a custom wiki content type and create a new page layout based off of that content type. I've also set my site so that my new layout is the default page layout. This works when creating
new pages on the site but when i try to create a new wiki page --> [[new page]], I'm still getting the typical blank wiki template. How on earth do i get my page layout to sync with creating a new wiki page?

Hi,
For your issue, go to Site Actions > Site Settings > Page layouts and site templates (Under Look and Feel).
Pages in this site can only use the following layouts: add custom wiki template.
Select default page layout: choose custom wiki template.
Besides, here is a blog, you can use as a reference:
http://blog.henryong.com/2010/06/08/how-to-create-custom-sharepoint-2010-page-layouts-using-sharepoint-designer-2010/
Best Regards,
Lisa Chen

HT204088 Dear sirs, Could you please help me on my problem with my apple ID I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working, My account have 50$ and stil

Dear sirs,
Could you please help me on my problem with my apple ID
I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working,
My account have 50$ and still didn't buy anything

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(100546)

Create new page with every excel line

Similar Messages

Maybe you are looking for