Create new pages but don't publish yet.

Is it possible to create multiple pages ready for publishing but only publish selected ones today?
To clarify if I create 10 pages today but don't want to publish them all today, 5 today 5 tomorrow is there a way to publish them in stages? The publish selection only has the options of publish 'all or publish 'modified'.
Thanks Mick

Go to plan view, right click a page and deselect "Export":

Similar Messages

I've created a new user but don't see it in the login screen

I've created a new user but don't see it in the login screen. Can somebody help?

Hi,
Before going further, I’d like to recommend you check if the address list is visible in OWA.
If yes, this issue occurs when the AddressBookRoots attribute of the Microsoft Exchange object does not have the same distinguished name value that is set in the All Address Lists attribute.
For more detail resolution, you can refer to the following article:
http://support.microsoft.com/kb/982351
Thanks,
Angela Shi
TechNet Community Support

Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......

Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......can anyone help, please?!

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

Clicking "page from template" does not allow me create new pages

I stared designing a site with the trial version of CS4. Of course it involved a lot of trial and error, creating a page and canceling it again etc. At last I was able to design the index page and a few other pages, but suddenly just about 7 days into the trial period, the template started looking different; not displaying the images and displaying the home page article in an improper way. I also discovered that I could not create new pages by selecting file\new. When the new document dialogue page opens and I select "page from template" and then select a site I am working on, nothing shows in the items list. I only see the message "no items". Moreover, the "create" (new page) button is no more a click-able area.
I even tried it by proceeding as if I wanted to design a new site. I click file\new\page from template\the site, but when it comes to the stage where I should select "2 column liquid, left sidebar, header and footer" after clicking “page from template” I don't see anything in the items column. It only tells me "no item."
I thought this problem was due to the fact that I was using the trial version and that the trial version was limited in the number of new pages I could create. So I bought the full version. Alas! I discovered that changed nothing. Right now am stuck. Do you have any suggestion?

I think you're are confusing DW Templates with CSS Page Designs and Starter Pages.
Templates are a DW proprietary device. They permit you to have sitewide elements such as common menus, headers and footers on all your pages along with Editable Regions for page specific content (i.e. the stuff that changes on every page).
DW Templates looks like this (notice the Template Editable Comments):
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />

<title>Untitled Document</title>



</head>
<body>
My Page Specific Content Goes here

</body>
</html>
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

Can't get Contribute to Create New Page

Can't get Contribute to Create New Page
--Have 'tried' all options for 'new page' - button, File>,
and Ctl + N
--Have tried via each of my different websites
--CAN Edit existing pages!
--Established myself as Administrator, and Publisher
--Downloaded "Update" & ran "Repair" option
STILL Can't open a "New Page"!!!???!!!
Can anyone help?

I don't suppose you ever found an answer to this problem?
I've got exactly the same on a laptop: Desktop is absolutely
fine.
As in your case the software works 100%, but you simply can't
create a new page (across all sites). Crazy - no error message, no
nothing.
I did make the fatal error of installing a demo version of
the software before buying the real software, so I did have to go
through 6 pages of A4 instructions to try to get the read software
to install... perhaps this is a vestige of that???

How do I make it so my client can edit Links in business catalyst when they create new pages?

Okay so essentially I have built a site in Muse uploaded to business catalyst and I've setup a site template so that the client can create new pages as each new course arrives, but how do I get the link from the homepage to link to the new page? basically I need the link to be editable.
What would be ideal is a kind of portfolio layout where there is a thumbnail and a new page but for my client to be able to add a new project adn it would create a thumbnail on the homepage and a new page that he can edit. Does anyone know of something like that possible in Business catalyst?

Hi
Editing with Business Catalyst only works with image or text editing , we cannot add new page or page items using in browser editing.
However, you can manage the site from BC end when your client and login to admin and add pages, modify etc, but if you re-publish the site from Muse then then changes will be overwritten.
Thanks,
Sanjit

Creating new pages in iWeb

Could someone assist please with creating new pages within a page - that is if I need to follow from
a previous page with in context stuff, but I don't want a NEW page with a NEW page heading at the top.
I just want to put more stuff up under an existing page heading and using an arrow to go to new page
all in the same section. Rather than filling the top with new page headings. Sorry if I cant explain it better! Thanks - Gareth

This works for your site because it is mostly photos and you have used the Photo Page, fine. However, what you need to remember is that many people just have ordinary websites without photos who might still want to use sub pages and this method will not work for them because there are not forward and back links.
I have sub pages on my own website and basically, I created an About Us page. I have some text there, but then I have something that says find out more about these people. I did not want these other pages displayed in the main nav bar, so I took them all out and what I have done on the About Us page is use a shape with the name of the person in it and created a hyperlink to that page. You click on the relevant shape and this takes you to the page for that person - on this page I have then created a shape with Back and Forward in it - the Back hyperlink if clicked on takes you back to the About Us page and the Forward hyperlink takes you to the page for the next person etc.
If you want to create sub pages on an ordinary web site, then this is how you need to do it - you need the links on the pages that are not in the main nav bar to be able to get around the site.
You don't have those links on your site, but as it is mainly photos then this does not matter and works for you, as you go from gallery to gallery. This will not work for everyone though - horses for courses! What works for one might not work for another.

Does anyone know if there is a way to arrange songs on a playlist that has 100 songs? I used to be alble to double click and open a new page but that is no longer an option. Because you cant get a total view of the playlist it is almost impossible

I used to be alble to double click and open a new page but that is no longer an option. Because you cant get a total view of the playlist it is almost impossible.. if a song is in position 95 and I want to put it at 3 I have to hold it and drag it till the curor moves.. This makes creating an order almnost impossible because you cn only see half of the songs

1.SmartyPanouZe3rd,
Sep 4, 2013 1:03 PM   in reply to SmartyPanouZe3rd
This is a follow-up to the above question I had.
Since i noticed people looking at the question, but no replies showing up, i contacted BC support directly with the same question.
I got a reply.
I did tests based on the reply.
Here is what is going on based on the reply.
(spoiler alert : It works... but it's not yet a perfect score.)
All the details are posted here :
http://www.animavdo.com/mut/ambiguity-001.html
Hope this can help others.
Cheers.
PS I still will use DW for the heavy lifting...
       But MUSE is nice for quickly putting together a mini website.
       Highly recommended App.

Can I still create new sites in iweb and publish them to mobile me?

Can I still create new sites in iweb and publish them to mobile me? Also Can the sites not contain movies or photos, or just not a full gallery?

You can have as many sites and domain names on a single MMe account. However, only one site can use the CNAME domain name forwarding while the others must use URL forwarding.
Multiple Sites with Domain Name(s) in a Single MobileMe Account
Here's how to have multiple sites in a single MMe account with one or more sites having a domain name.
A. All sites are in the same Domain.sites2 files
1 - only one site can use the CNAME method of domain name forwarding and it must the top site in the left hand pane of iWeb.
Click to view full size
2 - the other sites must use URL domain name forwarding which directs the domain name to the site's full MMe URL, http://web.me.com/MMeUsername/SiteName, or, if there is no domain name, just MobileMe's full URL.
B. Each site is in its own Domain.sites2 file.
Again, only one site can use CNAME forwarding. This presents a problem since CNAME forwarding directs the domain name to the basic MMe account URL: http://web.me.com/MMe_Username/ which uses an index.html file in the root folder of the account, iDisk/Web/Sites. Each time a new site is published or an existing site uses the File->Publish Entire Site a new index.html file is created in that root directory, iDisk/Web/Sites folder, directing the browser to that particular site. This file is what the CNAME method uses to find the site it represents.
Therefore some steps must be taken to assure that the index.html file in the MMe Accounts root directory always points to the correct site. This can be accomplished is three ways.
1 - don't use the CNAME method. Just use URL forwarding . This, IMO, is the simplest method as it doesn't requre any additional effort on the user once the domain name has been set up.
2 - use the following method suggested by Wyodor in this topic: Is it possible to have multiple sites when using ur Domain name?
In iWeb domainfile 1:
Create a dummy site : _dummy
with a blank page.
Create your working site : Whatever
Add pages
Publish both Sites to the same same location on the same server.
Your _dummy site is now the default Site.
Check.
In iWeb domainfile 2:
Create/Use your CurrentSite.
Move a page to the top of the Site and back. Publish the Site.
iWeb will create a new index.html file in the root of the server and from now on CurrentSite is the default site.
Check.
From now on, never move your Whatever Site to the top of the list in the iWeb sidebar and never change the page in the _dummy site.
Simply do not touch your _dummy ever again. And never forget that.
3 - use Ethmoid's suggested method in Using two sites - setting one up with separate domain? or republishing the entire site that uses CNAME forwarding. Just making a minor change and publishing the site changes does not create a new index.html file.
The entire site must be republsihing in order to get that new site.
Or keep a copy of the CNAME site's index.html file on your Mac and replace it manually in the iDisk/Web/Sites fodler when necessary.
NOTE: the CNAME method provides a shorter URL: http://www.DomainName.com/Site_Name/PageName. CNAME does not have masking.
The URL forwarding displays the full MMe URL:
http://web.me.com/MMeUsername/Domain_Name/PageName.
With domain name masking that will be shortened to:
http://www.Domain_Name.com for every page of your site.
However, visitors will only be able to bookmark and enter at the first page of the site. If a page is refreshed the visitor is taken back to the first page. Also search engines will only be able to index the first page of the site.

HT5622 my i tunes id is not working......i try to create new id but it requires my visa card info....what should i do

my i tunes id is not working......i try to create new id but it requires my visa card info....what should i do. how can i get my precious id or how can i create new id without giving visa information. i tried but there is no none option in visa card part

What do you mean by 'my iTunes id is not working' ? Of you mean that it's disabled then you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
You might then need to log out of your account on your iOS deviced by tapping on your id in Settings > Store (Settings > iTunes & App Store on iOS 6+) and then log back in so as to 'refresh' the account on them.
If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
If you mean something else ... ?
In terms of creating a new account, there are instructions on this page for how to create one without giving credit card details : http://support.apple.com/kb/HT2534 - the instructions won't work with existing accounts, and any content that you bought/downloaded with your existing acocunt will remain tied to that existing account.

HT204053 Hello, I want to change my ID but I can't.i go to my iPad store and sign in my new ID but don't accept.

I want to change my ID but I can't.i go to my iPad store and sign in my new ID but don't accept

I find that the easiest way to change the account you are using on your mobile device is to scroll down to the bottom of the iTunes Store or App Store on the device and tap the Apple ID button. Then:
- To sign out, or to sign in to a different account, tap the Sign Out button.
- To sign back in, tap the Sign In button, then tap either Use Existing Apple ID or Create New Apple ID, and follow the on-screen instructions from there. I hope this helps.

I can't delete, move or create new pages.

Hello,
I have catalogue (390 pages)
Today i cant delete, move or create new pages.
When i delete, move or create new pages - my Indesign CS5.5 program "freezes"
Only with CTR: + ALT + SHIFT i can stopped my program.
Аfter reopening everything was as before!
I try to export like a *.idml file, but my program crashes! Every time!
My OS is: Windows 7
Indesign CS5.5
Please help me
Thank you!
With kind regards,
Botev Plovdiv

Is there anything at all related to this freeze in the Windows Event Viewer?
Are you able to add, remove, or move pages in a new document? Are you able to export a new document to .idml?
Yes, it is able!
It sounds like there may be a corrupt bit of text, or an image in the file. It may be possible to isolate a page, and then an object, using "Divide and Conquer."
Start with a copy of the file, for safety. Try to export the front half and the back half separately. If either half crashes, divide it in half aand try to export those halves. Repeat the process until you have isolated a page that crashes. Now remove half the objects from that page and try to export. If it works, put those back and remove the other half and try again. Repeat as above until you isolate an object.
Thank you, I will try!
After that i will back to you with my comments!
Thank you again, Peter!

Use a Custom Page Layout When Creating [[new pages]] in Enterprise Wiki

I have followed a few different blogs and I've been able to create a custom wiki content type and create a new page layout based off of that content type. I've also set my site so that my new layout is the default page layout. This works when creating
new pages on the site but when i try to create a new wiki page --> [[new page]], I'm still getting the typical blank wiki template. How on earth do i get my page layout to sync with creating a new wiki page?

Hi,
For your issue, go to Site Actions > Site Settings > Page layouts and site templates (Under Look and Feel).
Pages in this site can only use the following layouts: add custom wiki template.
Select default page layout: choose custom wiki template.
Besides, here is a blog, you can use as a reference:
http://blog.henryong.com/2010/06/08/how-to-create-custom-sharepoint-2010-page-layouts-using-sharepoint-designer-2010/
Best Regards,
Lisa Chen

How to create new page from EBS

Hi
I want to create new page through EBS
is that possible
and
how?

HI
Now page is run successfully
but when it opens then It gives an error like:
Exception Details. >oracle.apps.fnd.framework.OAException: Application: ICX, Message Name: Could not find the specified responsibility.
     at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(Unknown Source)
     at oracle.apps.fnd.framework.CreateIcxSession.createSession(Unknown Source)
     at runregion.jspService(_runregion.java:132)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
     at java.lang.Thread.run(Thread.java:595)

Infinite loop creating new page due to column header overflow.

i am getting an error and some pages "Infinite loop creating new page due to column header overflow. " --
using report builder 9, i have a fairly simple report - that contains 4 subreports.
for some pages i get the error - it seems if there is more data than would fit on 1 page.
smaller pages work fine.
the subreports are all simple queries and dumps....
containing page header, column header, detail sections.
page header has just a text bar of the name of the section.
column header has the field names
detail section has the data - 1 row for each row in the recordset.
nothing i do seems to change getting "Infinite loop creating new page due to column header overflow. " on a page with more than 15-20 records returned.
any ideas would be appreciated.

Try these links if you are still having the issue:
http://community.jaspersoft.com/questions/543302/receive-infinite-loop-creating-new-page-d ue-column-header-overflow-exception
http://community.jaspersoft.com/questions/500177/infinite-loop-due-page-header-overflow

Create new pages but don't publish yet.

Similar Messages

Maybe you are looking for