Create New Plant for Company

Hi all,
I want to create one new plant so obviously create business area and so on. How can i create this Plant and business area for this Plant. Please kindly tell me how can i open new Plant and business are in my Company and how can i attach with all report.
Thanks in advance
keyur

Hi,
Follow this link it may be useful,
[http://www.sap-basis-abap.com/sapmm001.htm]
Regards,
Raghava Channooru

Similar Messages

Difference in using EC02 and OX10 for Creating new plants

Hello experts,
I would like to know the impact of using both the transactions
Thanks
Imraan

Dear mimraan70,
EC01 is used for organization structure,here one compay code how many plants you assigned and how many purchase organizations assigned like you do here
were OX10 is changing address and creating new plants etc,but in EC01 we cant create plant
Hope this may helps you
Prem.

How to create new structure for SOP?

How to create new structure for SOP? and transfer data for long term planning?

hi dear
For SOP there are two types
1. Standard SOP : this the standard SOP configured by SAP consider the Level by Level planning and planning done for product group .
2. Flexible planning SOP: this option is given, so that Rough planning/SOP planning can be done as per the client requirement.e.g planning structure can be sales orgn., distribution channel, division, plant, material
For configuring the flexible planning SOP follow steps
1. Define info structure in IMG
where u define the characteristic and Key field
2. Set parameters for info structures and key figures
Sales & Operations Planning >Master Data>Set parameters for info structures and key figures
where u define Planning method
Consistent planning
Level-by-level planning
Delta planning
and aggregation type
1. Average calculated
2. Total created
3. No aggregation
3. create Planning type with reference to info structure
Regards
Suresh

Error message at the time create new Hierarchy for Cost Centers (OKEON)

Dear Experts,
we have create new company code with reference to old company code. at the time create new Hierarchy for Cost Center with t code OKEON system given the error message "Overlapping intervals or identical values have occurred".
we have already checked the duplicate entry but not found the same.
Please help.
Regards
BK GAIKWAD

the long text to the message is:
Diagnosis
You want to use cost center together with activity type . For this combination, however, no master data record was created in fiscal year . The record is defined in CCA during activity type planning.
System Response
Procedure
1.Create the master data record.
Activity type planning
1.Or, check your entries.
I think you should discuss it with your functional consultant

Steps Of Creating New PLANT..

I required Steps of creating new plant in the system
If anybody having Document then mail me on
[email protected]

Dear Parmar
Follow the IMG Path to create a new plant
Enterprise Structure --> Definition --> Logistics-General --> Define, copy, delete, check plant.
Once you created plant here, you have to assign to company code. So select next to "Definition", "Assignment" will be there. Choose this and select Logistics-General.
Here you have to assign the plant to your company code, Business Area.
The next step is that you have to assign the plant to sales area. Select OVX6 and assign.
Thanks
G. Lakshmipathi

Need Help to create new screen for RF Sapconsole

Hi Guru's
I'm new on RF (but some years in ABAP) since last week.
I need help to create new screens for RF (SAPLLMOB).
Can someone explain me the procedure to create screen (with ABAP code after) or perhaps someone have an exemple (simple or not) ?
I have to develop 2 new screens with really few time.
And, another subsidiary question :
how SAP can transfert information between the flash gun and the screen i have developped.
Is there some code to add to enable this functionality or it is include in SAPLLMOB on standard fields ????
It's a new strange world for me today...
Many thanks to everyone who can explain me
Alain

hi,
I am facing this problem as well. Is there any reference to create the new screen?
Hope someone can help! Thanks!
Regards,
Darren

Create new session for each window opening

From a jsp page i open a page called student.jsp by clicking on students admision no.Therefore lots of pages can be opend in new windows with relevent student details.
but when i click on the link i called a servlet, get relevent details and redirect to student.jsp. The problem is ,all opened windows have same session id and there are session conflicts.
How can i create new sessions for each page thru the servlet or is there any other alternatives

I actually was working on a problem that was similar to this, and the problem is with how each web-browser works with sessions...
Each browser window (Except in one case with IE) will use the same session in each window.
However, you might be able to use URL-Rewritting to manage your sessions and get around using cookies for for session tracking. I personally haven't tried this, but I'm betting that it will work.
Best of Luck,
Nate

How to create new scope for SharePoint calendar?

How to create new scope for SharePoint calendar?
I have a calendar list to which I want to create following scopes-
Annual View
Half Year 1 (Jan-June)
Half Year 2 (Jul-Dec)
Quarter 1 (Jan-Mar)
Quarter 2 (Apr-Jun)
Quarter 3 (Jul-Sep)
Quarter 4 (Oct-Dec)
How this can be created. Any help appriciated. Thanks.

Hi Pratima,
Can you please see below link and code snippet for how to
format date in gridview.
http://www.aspdotnet-suresh.com/2011/05/how-to-set-date-format-in-gridview.html
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title>Gridvew Date format</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:GridView runat="server" ID="gvdetails" DataSourceID="dsdetails" AllowPaging="true" AllowSorting="true" AutoGenerateColumns="false">
<RowStyle BackColor="#EFF3FB" />
<FooterStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<PagerStyle BackColor="#2461BF" ForeColor="White" HorizontalAlign="Center" />
<HeaderStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<AlternatingRowStyle BackColor="White" />
<Columns>
<asp:BoundField DataField="Date1" HeaderText="Date1" HtmlEncode="false" DataFormatString="{0:s}" />
<asp:BoundField DataField="Date2" HeaderText="Date2" HtmlEncode="false" DataFormatString="{0:D}" />
<asp:BoundField DataField="Date3" HeaderText="Date3" HtmlEncode="false" DataFormatString="{0:m}" />
<asp:BoundField DataField="Date4" HeaderText="Date4" HtmlEncode="false" DataFormatString="{0:d}" />
<asp:BoundField DataField="Total" HeaderText="Total" HtmlEncode="false" DataFormatString="{0:C2}" />
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="dsdetails" runat="server" SelectCommand="select * from DateFormat" ConnectionString="<%$ConnectionStrings:dbconnection %>"></asp:SqlDataSource>
</div>
</form>
</body>
</html>
Hope this will help you.
Regards
Soni K

Problem in creating new implementation for filter dependent badi

Hi Experts,
I want to use badi NOTIF_EVENT_POST.It is a filter dependent badi. It is asking filter type while implementing thro se19. Could anyone pls tel me how to create new implementation for the filter dependent badi. Existing filter type is QMART. is there any problem if i change the filter type?
Thanks in Advance!

Hi ,
NOTIF_EVENT_POST is filter dependent and filter values are based on QMART value in table TQ80. You need to specify the filter value ie : QMART value before implimentation , before that check all active implimentations for the same , if u have to impliment on same filter value , you need to deactivate the one which is implimented on same filter value .
You are not supposed to change the filter type.
Regards,
Vamsi
Edited by: CH. VAMSHI on Sep 29, 2009 11:58 AM

Problem in creating new versions for existing DIR using CV01N

I am working in SAP ERP 6.0 EHP 4.0 system.
I have problem in creating new versions for existing DIR using CV01N
I create a DIR version 00 with functional location and mpd cycles. Then when i try to create a new version by copying the contents created from already created document.I change the MPD cycles in the new version and save it.
once when i display the first document created the mpdcycle specified in version 01 is copied to the 00 version.
The document is inconsistent where versioning of document doesnot work properly wrt MPDCYCLE and MP HEADER.
The problem which i found was the document identification guid remains the same for all the document versions getting created.
The same is working fine in SAP ERP6.0 EHP3.0 sytem.
Please someone help me in resolving the above issue.
Regards,
Prasad.B

There is a change in the standard code.The reason for the above problem was because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
IS-ADEC-MPD - Enhancement to copy MPD data
ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
+*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
+**ENHANCEMENT 1 ZSF_AD_MPD_SAPLCV110.    "active version**+
+*** copy MPD relevant data from templ. doc to current doc**+
+**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
    +**EXPORTING**+
      +**is_draw = ls_draw**+
    +**TABLES**+
      +**ct_drad = lt_drad.**+
+*ENDENHANCEMENT.**$*$-End:   CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
Regards,
Prasad.B

Unable to create new domain for ORM in Weblogic 8.1

Hi,
I have installed Oracle Role Manager(ORM) 10.1.4 and to run ORM in weblogic i have to create a new domain for ORM.
I tried to create a new domain in weblogic 8.1 in configuration wizard by selecting the orm_createdomain_template_103.jar but i m getting an error
"There is a problem with the template".
This template is to create new domain for ORM in weblogic 10.3
Kindly help me to resolve this issue.
Regards,
Manju

I have installed ORM 10.1.4.1 on weblogic 10.3
I have also created a new domain for ORM in weblogic.
When i start the Managed server using startManagedWebLogic.cmd i m getting the following
errort
t3://localhost:7004/jndi/weblogic.management.mbeanservers.domainruntime.
java.io.IOException: Unable to resolve 'weblogic.management.mbeanservers.domainr
untime'. Resolved 'weblogic.management.mbeanservers'
at weblogic.management.remote.common.ClientProviderBase.makeConnection(C
lientProviderBase.java:156)
at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(
ClientProviderBase.java:79)
at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnec
torFactory.java:338)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFacto
ry.java:247)
at weblogic.management.mbeanservers.runtime.internal.RegisterWithDomainR
untimeService.getDomainMBeanServerConnection(RegisterWithDomainRuntimeService.ja
va:199)
Truncated. see log file for complete stacktrace
javax.naming.NameNotFoundException: Unable to resolve 'weblogic.management.mbean
servers.domainruntime'. Resolved 'weblogic.management.mbeanservers'; remaining n
ame 'domainruntime'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(Basic
NamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.jav
a:252)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.j
ava:182)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:20
6)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:21
4)
Truncated. see log file for complete stacktrace
>
<Jul 3, 2009 10:08:52 AM GMT+05:30> <Notice> <WebLogicServer> <BEA-000365> <Serv
er state changed to RUNNING>
<Jul 3, 2009 10:08:52 AM GMT+05:30> <Notice> <WebLogicServer> <BEA-000360> <Serv
er started in RUNNING mode>
Please help me to resolve this issue.
Regards,
Manju

How to create new version for material

Hi expert,
Can anyone please guide me step by step on how to create new version for material and vendor? Please also mention transaction and details step by step.
Thanks

HI,
Do you mean to have version management for purchasing documents?.
Best Regards,
Arminda Jack

How to Create New Application for iPhone

Hi,
Can anyone guide me how to create New Applications for the iPhone.
Regards,
Mustafa Ali Qizilbash

If you think Apple's is making a profit off the $99 it collects for the iPhone Developer Program membership, you're badly underestimating how much it costs to run the program.

Do I need to create new group for standby redo log files?

I have 10 group of redo log files with 2 members for each group for my primary database , Do I need to create new group for standby redo log files for the standby database
Group#     Members
==============
1              2
2              2
3             2
4             2
5             2
6             2
7             2
8             2
9             2
10           2
If So, The following statment is correct? or nto
ALTER DATABASE ADD STANDBY LOGFILE GROUP 1 ('D:\Databases\epprod\StandbyRedoLog\REDO01.LOG',D:\Databases\epprod\StandbyRedoLog\REDO01_1.LOG');
please correct me if am doin mistake
becuase when I issue the statment I getting error message sayin the group is already created.

Thanks John
I just find the answer
Yes, it's recomeded to add new group , for instnace If I have 10 group from 1 to 10 then the standby shoudl be from 11 to 20
Thanks I found the answer.

Create new mailbox for existing users?

Hi All,
I am new to JNDI concepts. I need to create new mailbox for existing users in domino directory. is it possible?
Scenario is : I have some users in domino directory. They dont have mail account now. I want to create it.
Kindly guide me...
Thanks,
Ram

Hi,
You can try LSMW (Direct method) for uploading class values.
Upload file can hae following structure:
OBJEK     |     ATINN     |     KLART     |     ATWRT
Release Grou+Release strategy |     Characteristic name     |     Class type     |     Class Value
e.g. rel grp is PO, rel strategy is 01, characteristic name is EBAN_EKORG, and class value is 1000 then
OBJEK     |     ATINN     |     KLART     |     ATWRT
PO01     |     EBAN_EKORG |     032     |     1000
multiple characterstics can be
OBJEK     |     ATINN     |     KLART     |     ATWRT
PO01     |     EBAN_EKORG |     032     |     1000
PO01     |     EBAN_EKGRP |     032     |     100
Regards,
Yogesh

Create New Plant for Company

Similar Messages

Maybe you are looking for