Create New Service Session at Solution Manager = Product System missing

We have installed SAP EHP 1 for SAP Solution Manager 7.0 last year but not really use it.
We have setup in the system landscape:
Server (ecc6sbx)
Databases (MCD)
Product System (MCD) => SAP ERP
Assigned them to logical component (eg ZECC6DEV)
RFC destination for MCD was generated
SDCCN Administration at solutions manager display MCD with SDCCN status in green color.
At the satellite system MCD, SDCCN Maintenance job was created and scheduled. Initial single run was also done.
There were no issue. Connection to SDCC_OSS was fine.
Back to the SOLUTION_MANAGER transaction, we created a new solution ECC ERP - Development.
In the Solution Landscape => Solution Settings, we have assigned the Logical Component into the System Group.
However when we expand the tree, and click on the Servers folder it did not display anything.
Click on the Product Systems also did not display anything.
We have another Solution Manager which display information on those Servers and Product Systems folder for satellite system.
Going back to the Solution Manager for the Solution ECC ERP - Development, I tried to Create New Service Session for EarlyWatch Alert. When  I click on the Create button, I could only see SAP EarlyWatch Alert for Solutions, there is no SAP EarlyWatch Alert for the Reference Object MCD (<installation number). I could not create a session for MCD.
Does anyone have ideas what I am missing here? I am trying to attached a document which have print screen for reference while creating this message, but there is no such function here.
Adding to link to the document file contain print screen
[Wihtout System and EarlyWatch Selectable.doc|http://www.easy-share.com/1915633524/Wihtout System and EarlyWatch Selectable.doc]
[With System and EarlyWatch.doc|http://www.easy-share.com/1915633514/With System and EarlyWatch.doc]
Edited by: Steven Foo on May 24, 2011 8:00 AM
Edited by: Steven Foo on May 24, 2011 8:18 AM

Anyway, in the solution manger  how to we setup earlywatch alert for the SM SID host itself (source system)?
I have the information on the below from our solution manger
The data for this session is overdue. Data has not yet been transferred from the associated satellite system.
Go to the Service Data Control Center (transaction SDCCN) in the satellite system and check why the data has not been sent.
Typical sources of errors are:
The RFC connection for the SAP Solution Manager system is not working.
The 'Task Processor' background job, which collects the session data, has been changed.
Problems arose while data was being collected (see the detail log for the task that collects the session data).
A periodic 'SDCC Maintenance Package' task has not been scheduled to check whether your SAP Solution Manager system requests session data.
I tried to go SDCCN on the solution manager itself and look at the Maintenance Service Definitions:
I get the information:
No suitable RFC Destination found in SDCCN settings.
When I click ok I get the following
No RFC destionation to source system of service definitions available
Delete Service Definitions (radio button selected).
I did not continue and cancel it as I did not want to delete anything.
I check the Task Processor background job is running at SM host itself.
I managed to get the Maintenance Package job running. However it failed with the following
Error refreshing service definitions from destination SM_SSMCLNT001_BACK
Source and target system may not be identical SSM
The source and target system is the same ==> SSM, will this be an issue?

Similar Messages

  • Cannot create new Service Application in Manage Service Applications in Central Administration

    Hi!
    I'm having problems with a new SharePoint 2013 Enterpise installation. The issue I'm having is is that if I navigate to Manage Service Applications and click on New I get nothing in the dropdown. If I use the wizard I can create new Service applications but
    not through the Manage Service Applications page. Anyone know why? The button is not greyed out and I can click it but it doesn't show any service application at all (see picture).

    Hi,
    Based on your description, there is no service applications in the new dropdown list in SharePoint 2013.
    Check things below:
    Run the SharePoint products Configuration Wizard and      then check if the same situation will occur.
    Run Central Administration as administrator and then      check the results.
    According to your last post, it seems that there is something wrong about certificate.
    How do you connect server through remote access? And check if it is the same situation when you create service application in SharePoint
    server.
    Best regards
    Sara Fan
    TechNet Community Support

  • I created new responsability using seeded menu 'Manager Self Service'it give me that'select action' no selected action

    i created new responsability using seeded menu 'Manager Self Service'  which is assigned to seded responsability  'Manager Self-Service', when i try  to open any  function like 'change job' it give me that there are no  selected actions although it works with the seeded responsability.

    Hi Steven,
    Please create a quota template named "Personal site" and apply in self service site creation page, then check again.
    http://blogs.msdn.com/b/jimmiet/archive/2012/07/22/10332361.aspx
    http://danmyhre.wordpress.com/2010/03/16/my-sites-do-not-have-a-quota-when-they-are-created/
    Thanks
    Daniel Yang
    TechNet Community Support

  • Unable to create new services using the R3 replicated service categories

    Hi All,
    I have the following problem:
    We have replicated the services from our R3 system to SRM (as well as the materials).
    We also have an external system that will be creating new services and it will reuse the service categories from R3.
    When I try to create a service online, I can only select the SRV_ category type. None of the others which do exist in COMM_CATEGORY are available (Like SRV_ALL, SRV_SERV,...). When I try to select them I get an error like:
    "Product category SRV_ALL has a different product type to maintained product"
    The problem doesn't exist for materials where I can use any of the MAT_* types.
    I suspect that the settings in COMM_HIERARCHY transaction might have an impact. I can see that for MAT_ and all MAT_* the attribute product type has been set to "Product". Whereas for services I only see that SRV_ is set to "Service", all the other SRV_* type have no value set. According to SAP Help they would inherit the value from the parent which is SRV_, but perhaps this functionality doesn't fully work?
    Now, I would like to get the value the product type attribute set to "service" for all SRV_* type, however in SRM I cannot edit them as the ECC system is the source. Does any one know if I can change some settings for the replication of the service types so that this attribute is set for all my service types during replication? Or any other solution?
    Thanks in advance!
    Lee

    Anybody?

  • Creating new services using ORADIM utility

    Hi,
    i have Oracle 11g R1 on windows XP service pack 3 platform.
    i am having some issue while creating new services using ORADIM utility.
    The Errors are:
    18:13:28 SYS@vik 24-MAY-11> host oradim -delete -sid vik
    Instance deleted.
    18:13:52 SYS@vik 24-MAY-11> host oradim -new -sid vik -intpwd oracle -startmode A -maxusers 100 -pfile D:\app\vikash.chauradia\product\11.1.0\db_1\database\initvik.ora -timeout 60
    OPW-00005: File with same name exists - please delete or rename
    Instance created.
    Error while deleting value, OS Error = 2
    Can anyone please help me to fiinf the solution?
    Thanks and regards,
    Vikash Chauradia(DBA Trainee)

    Vikash Chauradia(Junior DBA) wrote:
    Hi,
    i have Oracle 11g R1 on windows XP service pack 3 platform.
    i am having some issue while creating new services using ORADIM utility.
    The Errors are:
    18:13:28 SYS@vik 24-MAY-11> host oradim -delete -sid vik
    Instance deleted.
    18:13:52 SYS@vik 24-MAY-11> host oradim -new -sid vik -intpwd oracle -startmode A -maxusers 100 -pfile D:\app\vikash.chauradia\product\11.1.0\db_1\database\initvik.ora -timeout 60
    OPW-00005: File with same name exists - please delete or rename
    Instance created.
    Error while deleting value, OS Error = 2
    check for the files in ORACLE_HOME/database. You have dropped existing instance and creating service again, move all the files to other folder then create using ORADIM

  • New Features Planned for Solution Manager 4.0

    hello friends
              can can one tell me the new features that are there in solution manager 4.0 as our organisation is planning for solution manager 4.0
    regards
    neha shah

    hi neha
    The upcoming release will focus on three major aspects:
    Enhanced support of key customer support processes:
    The SAP Solution Manager 4.0 release will offer functionality to assist you with your major application management tasks.
    For example, it will allow you to implement support packages and SAP notes end-to-end. SAP Solution Manager 4.0 will provide functionality to automatically identify relevant patches, and document and manage their implementation, testing, and import to your production systems.
    Continuous improvement services:
    The SAP Solution Manager has detailed information about your solution, such as key business processes and the SAP system landscapes. If your SAP competence center selects the new continuous improvement service offering, a designated SAP contact will be named and will actively work with you on a regular basis to solve your business critical SAP issues.
    Technical integration of Solution Manager Diagnostics into the SAP Solution Manager platform. Solution Manager Diagnostics provides all functionality to centrally analyze and monitor a complete NetWeaver system landscape.
    regards
    Janak Mehta

  • How to open multiple Sessions in Solution Manager

    Good Day Gurus,
    I am currently working on Solman 7.1 Sp12.My question is :Is it possible to open multiple sessions in Solution Manager? Here is the scenario: The client is working on multiple incidents and instead of logging on to the system again to access the 2nd incident he would like to open another session within the current call he is working on.
    Is this functionality possible in Solman? I have seen the functionality working before  in CRM interaction center not sure if it applies in Solman.
    Your help is highly appreciated.
    Thanks
    Maria

    Hi Maria,
    Options to Call a Function in an SAP System, by entering transaction codes in the command field, the transaction in bold is the one your want for opening multiple sessions.
    You can use the F1 key on the command field to display the following possible entries:
    /N to cancel the current transaction
    /NXXXX to call transaction XXXX directly from another transaction. Without the prefix, you can only call XXXX from the SAP Easy Access screen.
    /O to display the overview of the SAP GUI sessions on your computer
    /OXXXX to call transaction XXXX in a new window directly from another transaction
    /NEND to end the log on session with a confirmation dialog box
    /NEX to end the log on session without a confirmation dialog box
    /I to delete the window you are currently using
    Regards,
    Ruth

  • New Virtual hard disk wizard hangs after creating new vhd from huper-v manager on windows 7

    New Virtual hard disk wizard hangs after creating new vhd from huper-v manager on windows 7 workstation. 
    Windows 2008r2 hosts the hyper-v server. I can create VMs and VHD's when connecting to the server locally with the hyper-v manager. 
    The issue arises when I try to connect to the hyper-v server from my workstation which runs windows 7. 
    I have installed  The Windows6.1-KB958830-x64-RefreshPkg.msu that was suggested for windows 7 sp1. 
    I can connect to the hyper-v server, create vm's but  I cannot create vhd's  the gui just hangs with no errors in event log or on screen. 
    The files are there on the hyper-v hard drive but i suspect they are just created by windows as they are written and are not valid. 

    I've had just the same solution. Both did Hang Fixed size and flexible.
    Two parts were taken:
    1 - KB939820 for Windows 2003 server based domain controllers
    2 - disable using IPv6 on your NIC
    Result - both types of VHD's are created normaly.
    -----Infrastructure----
    Windows 2003 Domain upgtraded to 2008R2
    Windows Server 2008R2 Hyper-V - virtualisation clustered
    Windows 7 Pro - Hyper-V management
    Feel free to use --Mark as answer-- or --Propose as answer-- option and rate if a comment helps you or seemed usefull. -------------- Не забывайте использовать кнопки --От&amp;#1084;етить как ответ-- или --Предложить как ответ-- и проголосовать, если
    ко&amp;#1084;&amp;#1084;ентарий ва&amp;#1084; по&amp;#1084;ог или кажется полезны&amp;#1084;.

  • CRM Related Questions for Configuring Service Desk in Solution Manager

    Hi All,
    We have 3 requirements while configuring service desk in solution manager:
    1) Is there any possibility that we can restrict view of messages in solman for different teams. E.g: Finance Support team should not view message raised for Material Management Team ?
    2) Is there any possibility in service desk that we can assign message on the basis of location e.g: message raised for finance from location A should go to different support team of finance and for location B, it should go to different finance team ?
    3) Is there any possibility that we can make some question necessary while user is raising very high priority message from satellite system e.g: when we raise Very high priority message on service market place, we need to answer few mandatory questions ?
    I tried to search these functionality in standard scenario but I am not able to find something relevant. Please suggest.
    Thanks
    Sunny

    Hi Rama,
    I Need to configure the feature to generate a ticket to SAP directly in VERY HIGH priority.
    Could you please help me out into this. If you have any doc related to that Please send me.
    Thanks in Advance!
    Regards,
    Prabhat Singh

  • Delete the old CUA and build a new CUA on the Solution Manager

    Hello together,
    I'm about to delete the old CUA and build a new CUA on the Solution Manager.
    The users are in multiple systems almost the same.
    This raises the following questions:
    If I export the printers from the old CUA in a file and import into the new CUA (Solution Manager, then the printer can be administered directly in Solman?
    Furthermore, if I depended on the second or third child System  and attached to the new CUA, the user description data are not overwritten, as bsp: with the description data of the last-connected system?
    By delete the CUA child system in which users are blocked. Can you handle it?
    I thank you in advance
    Mirsad

    > If I export the printers from the old CUA in a file and import into the new CUA (Solution Manager, then the printer can be administered directly in Solman?
    -->the assignment of printers, not the printers themselves of course....
    > Furthermore, if I depended on the second or third child System  and attached to the new CUA, the user description data are not overwritten, as bsp: with the description data of the last-connected system?
    If you mean adress data, already existing adresses are not overwritten. Such users will show up in scug as 'identical' or different' and can be handled accordingly.
    > By delete the CUA child system in which users are blocked. Can you handle it?
    Users without assignement to the central system get a global lock if the cua is removed in the central system. They still exist in usr02 in the central system, but with the global lock flag as indication, that they existed only for adminstrative means. The local lock flags in the child systems stay untouched. So if you take over these users into the new CUA they get the correct lock flag form the child system.
    b.rgds, Bernhard

  • Solution - only productive system are displayed in DSWP

    Dear all,
    I have created 4 Solutions.
    In each solution - which has a "Productive System" as Leading Role of the Solution,
    only productive systems are displays when I start my DSWP transaction.
    Example :
    1. Solution Name : Sol_ER
    2. 3 logicals systems are assigned to this solution :
        Z_ER_CRM_SERVER_50 ==> D12 - Q12 and P12 are assigned to this logical component.
        Z_ER_ERP_60 ==> D11 - Q11 and P11 are assigned to this logical component.
    3. When I start DSWP and I choose Sol_ER as SOLUTION, only P12 and P11 SAP systems are display.
    I need to have all SAP sytems - D12-Q12-P12 and D11-Q11-P11 display in my SOLUTION.
    Thanks in advance for your input.
    Best regards
    CP2009

    Dear CP2009,
    Only productive systems are "Put in Solution" automatically.
    QAS, TEST, DEV systems need to be explicitly "Put in Solution".
    If you go into the solution, in change edit mode, and right click on the systems that are not showing up when the solution is used, and select "Put in Solution", then visually the SID should be highlighted green, and now available in the solution.
    I hope this information has been helpful and resolves this problem.
    Regards,
    Paul

  • How to create a New ' Support Team ' in Solution manager Service desk

    Hi ,
    How we can create new entries for ' Support Team ' in solution manager Service desk . Please provide me your great suggestions , thanks
    Regards
    Vivek

    Hello Vivek,
    I am assuming that you have created BP for users. In this case right click on position assign Owner(Business partner).
    user under that BP is automatically recognized.
    If you not created BP then you have to activate the integration between business partners and employees by setting the switch HRALX/PBPON to 'ON'
    read the document available at spro>sap solman imp guide>CRM>Master data>Business Partner-->Integration bP-org mgmt->setup integration with org mgmt.
    also read the blog in my previous post.
    Hope this helps.
    Regards,
    Shyam.

  • New componant list for service desk in Solution manager.

    Hello,
    We wanted to customize new componants for service desk. Please let me know is it possible to define new componant list in the Solution manager.
    Regards,
    Bhavesh

    Hello Waseem,
    Actually I want to configure a list of Customise component in side solution manager for incident management.( service desk)
    when we create ticket in service desk (in Solman) we have to select a component for the respective module( like BASIS, MM , Etc) those are the standard
    Components that is  given by SAP. I want to change that list and want to put my own list of component in the system.
    is it possible to do it in Solution manager? If yes then what sort of configuration required. ?
    Thanks in Advance
    Regards,
    Bhavesh

  • End User Role for Service Desk in Solution Manager

    Hey,
    I am launching the Service Desk functionality for my End Users. One thing that i want to know of is the role that I should assign my user in Solution Manager to access his message. E.g.
    I have a user 'A' who creates a message from any system in my landscape:Test, QA, Dev or Production. Now this message reaches in Solution Manager and is assigned to a certain Support Team according to the rules I defined. Now the personnel of Support Team needs some feedback from the end user who created the message. For that the user 'A' has to log into Solution Manager, access his message and enter the details which the Support Team requested.
    I want to know that what Role should i give to this user 'A' so that he is able to access ONLY the messages that he created i.e. "Reported by" field showing user 'A'; and is able to view and edit them.
    If I give him the role SAP_SUPPDESK_CREATE and SAP_SUPPDESK_DISPLAY, he is just able to see the messages, all of them, but is not authorized to edit any. Please help me out in this matter as i need a solution asap.
    Regards,
    Bilal Nazir

    Hi Nazir,
    Create a role and add this t-code manually.
    CRM_DNO_MONITOR - Transaction Monitor
    This is will definitely solve your problem.
    Feel free to revert back.
    Thanks and Regards,
    Ragu
    ERP,
    Suzlon Energy Limted, Pune
    Extn: 2638
    +919370675797
    I have no limits for others sky is only a reason

  • SAP Attributes of Service Desk in Solution Manager

    Dear all,
    We are using the Service Desk functionality of Solution Manager to create issues out of the satellite systems directly in SolMan.
    When opening a SolMan msg, navigating to 'Transaction Data > SAP Attributes', you have a field called 'System Type'.
    I'm trying to find out how this field is filled out. I suppose this is done by the satellite system at the moment the msg is send to SolMan.
    Already did some investigation:
         - in the satellite systems:
    t-code: USMM - System Type
    t-code: SCC4 - Client Role
         - in SolMan:
    t-code: IB52 - no system type attribute found in the IBase
    We have one system where none of the system type is set to 'Production', but when raising an issue in SolMan system type 'Production' is choosen.
    Anybody an idea where this info comes from?
    Thanks a lot!
    Roel

    Hi Roel,
    quick answer since I have been trying to find some answers about Service Desk myself.
    Anyway, I would double check again the satellite system and make sure that the client you have logged on is the same like in the service desk message. Usually, the IBase number the last 3 digits will tell you, which client it was created in. There might be one client configured in SCC4 as productive client even though it is not a production server. I have that kind of situation with one customer environment. Once the sap router is up and running for this customer system, then I will see, if this actually does happen.
    Otherwise, I would not have any ideas either.
    Your welcome,
    Markus

Maybe you are looking for

  • How to preview graphic files on a home web server setup?

    I apologize if this question is not asked in the most technical way, but here goes: I'm read online on how to create a home web server or ftp server on a Mac computer. (I plan to do this with my G5, running OSX 10.6.4) I would like to have a library

  • HP DV6 not getting started

    Hi, I'm facing problem with my HP DV6 6017tx. Its not getting started, nothing happens when i press power button, no lights on, no sound, nothing on screen, screen is black only. Just power cable light shows on whenever connected to power. Since last

  • Mapping API

    Hi Friends,    Could anybody here tell me where to find this com.sap.aii.mapping.api.StreamTransformation package? Thanks in advance. Regards, Tamilarasan.

  • Programmatic webdav/unc access requires user logon to windows server 2008 R2

    I have an automated process (a .net windows service) that connects to sharepoint document library via a UNC (\\mysharepointsite\doclib).  When the machine is rebooted, accessing this folder results in a  System.IO.IOException: The network name cannot

  • Exporting scheduled financial report batches with LCM

    Hi folks. Running 11.1.1.3 EPM here. I'm trying to use LCM to export scheduled Financial Reporting batches. When I am in Shared Services under Reporting and Analysis, under the Scheduled Objects drilldown, I don't see any scheduled objects yet I have