Create new solution

Dear all,
I have tried to create solution i got the below options
Solution Information
Solution *
Enhancement               Release
Original Language English ( EN )
    Continue >>    Cancel
let me know how can proceed ..
We are using SAP Solution manager 7.0 with win2003.
Regards

Dear Uday,
pls check my above post for creating Solution ...
Its shows below option ,
Solution Information
Solution ---> new solution
Enhancement -->/KWCUST/<...> Release --> 620
Original Language ---> Engilish
The above option are correct for creation Solution for Early watch setup..
Kindly suggest

Similar Messages

How to create new solution from Existing solution in integration services on TFS project?

Hi,
I am working on SSIS Project and it is created in VS 2008 .I opened the solution in VS 2010 and it is upgraded and unfortynately i don't have the back up to re open it in VS 2008.I am thinking of creating new solution from the existing one and open the new
solution in VS 2008.I was struck how can we copy existing solution to new solution on TFS.
Please let me know will this process work? and also how can we create a new solution without losing any files.
Any help is appreciated.

Hi moh1kumr,
As Joost said, you can try to revert the changes back for the checked in files in TFS. For more information, please see:
http://msdn.microsoft.com/en-us/library/ee371161(v=expression.40).aspx
http://stackoverflow.com/questions/2694644/how-to-revert-roll-back-a-checkin-in-tfs-2010
If it doesn’t work, I am afraid you have to design the package in VS 2008 from scratch.
Regards,
Mike Yin
TechNet Community Support

Solution_Manager cannot create new solution

Hi everyone,
I'm having problem with the transaction code SOLUTION_MANAGER.
When I access this transaction code, I should be able to click NEW button to create new solution.
What happen is as follow:
1. I click on NEW button.
2. I can enter SOLUTION NAME and LANGUAGE.
3. However, when I click CONTINUE, there is no response.
3.1 By right, I should be able to access a new screen and key in details of my landscape/solution. But for my solman, it is not working.
Any advice?
Thank you.
Regards

Hi all,
I didn't realize that my problem is quite common; and after reading all the thread and snote, my problem is exactly as was describe. I'll try the solution provided.
Thank you for the help
Regards.

Cannot create new Solution

Hello.
I've a new installed and patched Solution Manager 7.1 stack level 10.
I'm trying to create a new Solution from workcenter SolutionManagerAdministration.
Using NEW button , I fill the pop up with the new solution name, default language left English) and then OK.
A log message appears on the left upper corner asserting that "Creation of Solution xxxx with language E was successfull".
But the solution doesn't appear in the list , same in SMSY. If I try to create it again , using the identical name, I get the same message, so it seems that the message doesn't say the truth.But nevertheless no solution is really created.
I tried another way: copy the existing default solution into a new one. In this case the new solution appears in the list, but when I go to SMSY to assign a logical component, as soon I select the solution I get a message in the status bar:
"The solution XXXX has not yet been migrated to solution directory"
Diagnosis
The solution XXXX must first be transferred to the solution directory
Procedure
Call up transaction Solution_Manager and in the overview of active solutions, select the Add to Solution Directory icon (last column)
Unfortunately the transaction SOLUTION_MANAGER is no more active in this version....
Does anybody know why the creation is uneffective, an what the last message means , or what has to be done?
Thanks a lot
Dino

Hi Dino,
In SM 7.1 even SMSY also obsolete, it has only display view, future this also not possible.
Now regarding your error,
Since you are saying your solman_directory shows only sap_solution, means you have nt done the migration activities in the solman_Setup
Make sure, you completed all the steps in System preparation and basic configuration in SOLMAN_SETUP, specially all the task on STEP 6 Prepare landscape description inside 6.2 SETUP LMDB , inside the small button "Migrate technical systems from smsy"
and 6.3 migrate logical component from smsy
once all these steps are green, you wont get any migration error.
Please check.
Thanks
Jansi

Error Creating New Solution

I am currently getting this error when trying to create a new solution in ByDesign Studio
No logical port 'CSS_PORT' exists for the proxy class 'CO_PDI_LM_PNC'

I created an internal ticket for your tenant which has just been completed.

Unable to creat new solution in solution manager

Hi
i am unable to create a new solution.( trasaction : dswp) the process is asking for three credentials
sloution :
installation id or customer id
oraginal lang.
i dont what is installation id..
please help....
regards
anurag

Hi anurag,
please check the below link
http://help.sap.com/saphelp_sm40/helpdata/en/04/875ce729594746b15c130c2b8050fe/content.htm
Regards,
Srinu

UNABLE TO CREATE "NEW SOLUTION"

Hi all.
I have installed Solman 4.0 but I have an issue, when I call transaction SOLUTION_MANAGER to create a "New Solution" I fill up requiered fields (name and original language) and then I click "Continue" to save new solution but sceen back again to fill up "New Solution" again. I´m looking for any error but I can´t see anything...
Any idea?
Thank you in advance.

Hii Buddy
Try oss note 1008717 - worked for me.
Award points if its helpful, otherwise feel free to ask yr doubts
Regards
Sukhii

Create new solution: Deployment Unit

Hi
When creating a new solution a deployment unit has to be selected.
What exactly is controlled by this attribute?
I want to create a mashup solution for the HOME workcenter.
->> Which deployment unit should I choose for this ?
Thanks, Regards
Stephan

Hi Stephan,
You can find information on deployement units in the syntax documentation of the SAP Business ByDesign scripting language: [https://my020062.sapbydesign.com/sap/ap/ui/repository/SAP_BYD_WEKTRA/CP/sapLSUIContentPlayerTestPage.html?manifest=2230C95BA902B3ADBB8BA3C8B75026D0&COMPONENT=A1S_PDI&RELEASE=300&LANGUAGE=en&REGION=&INDUSTRY=&TASK=CR_VIEW&sap-language=EN|https://my020062.sapbydesign.com/sap/ap/ui/repository/SAP_BYD_WEKTRA/CP/sapLSUIContentPlayerTestPage.html?manifest=2230C95BA902B3ADBB8BA3C8B75026D0&COMPONENT=A1S_PDI&RELEASE=300&LANGUAGE=en&REGION=&INDUSTRY=&TASK=CR_VIEW&sap-language=EN].
See the Deployment Unit section in the Syntax for Business Object Definitions document.
Best regards,
Ulrike Kraus

Unable to create the new solution in Solman

Hello all,
I'm ubale to create new Solution using the transaction SOLUTION_MANAGER.
After choosing the button New to create the new solution and entering all required data when I choose the button Continue nothing is happenning. I'm not getting any error/warning it's simply sitting idle.
My Solman version is ST 400 Patch 09
Please help.
Thanks,
Ben

I had the same Problem.
You must Patch you Solution Manager Until Patch11.
Then you can create a new Solution
The Support Packages you must install are:
SAPKB70010
and
SAPKB70011
and
the CRT´s for the Packages
Edited by: Damian Reiner on Aug 7, 2008 2:16 PM

How to create a new solution for portals?

Hi all,
In order to makde goinglive sesions for portals, I´ve updated SAP Solution Manager (SSM) to 7.0 EHP1-SP19.
Portals have two servers:
- Win 2003 for main application (NETWEAVER 7.0 2004s)
- HPUX 11.23 for database (Oracle 10.2.0.2.0)
I haven´t worked with solution manager until this update, and of course, I haven´t configured before.
I´ve a mix of terms, possible configurations:
- run SOLMAN_SETUP transaction after update ¿?
- install SMD ¿?
- install/configure SLD (we haven´t configured) ¿?
- create new solution, system components, logical components,...
I´ve tried to create a server, database, system, but I don´t know what is the right procedure.
I´ve seen that there is a transaction called "SOLMAN_SETUP" that I suppose I´ve have to run to configure the new version, but the EWAs configured before de update, runs properly.
Do you know the steps as more detailed as possbible to create the new solution for portals after update?
Does any of this steps/procedure impact into our configured and running EWAs and Goinglive sesions?
Thanks in advance.
Best Regards
Chema
Edited by: tsunix on Mar 29, 2010 9:26 AM

Hello,
Are you trying to get the EWA working for Go-Live check or Solution Manager? Based on my understanding you are trying to get your Solution Manager setup to be able to generate these reports. However, I will provide notes for both incase I am misunderstanding you.
Please review the following notes for getting your system prepared for Go Live checks:
207223    SAP EarlyWatch Alert processed at SAP
1095227 FAQ: SAP Hosting - Early Watch Alerts
207223    SAP EarlyWatch Alert processed at SAP
Also, you can visit http://service.sap.com/earlywatch for more help/documentation on this.
If you are trying to setup your EarlyWatch on your Solution Manager system, then please visit the following URL:
http://service.sap.com/ewa
You may also want to visit this note to see if it helps.
1257308   FAQ: Using EarlyWatch Alert
Thanks,
Mark

Creating a new solution doesn't work

Hi
I installed SolMan 40 / Maxdb / Server 2003 and I am using IE6
All fine, no problems.
after some configuration task (TA: SPRO) I want to create a new solution
within TA dswp || solution_manager
Button "Create" and Cancel" are visible
I entered "Name of the solution" and "language" and press button "Create"
<b>AND</b> nothing happened !!!
Even when I press "cancel"
What I am doing wrong ? any hints ?
Thanks for help in advance
Andreas

Note 1008717 worked for me as well. Thanks for the help.
Rex L. Farris

Photoshop CS2 opens but wont perform any task (open jpgs, create new jpgs etc). Other CS2 progs such as indesign are fine. MAC shop, couldn't fix, said I should ty install op system 4 Powerbook G4-dont have discs- can I get them?other solution? OS 10.4.11

Photoshop CS2 opens but wont perform any task (open jpgs, create new jpgs etc). Other CS2 progs such as indesign are fine. MAC shop, couldn't fix, said I should try install op system 4 Powerbook G4-dont have discs- can I get them? or other solution? Am using OS 10.4.11 Thanks for any help

Hi
I actually dont think its Lion (sorry i put that as couldn't remember) as not on that computer at the moment, its at home, I am at work. I know CS2 is compatable with whatever OS I am using because I can using CS2 indesign etc and I was able to use CS2 photoshop until I updated the Camino browser (I believe this is when it stopped working). I have CS5 but it wont work at all on my Powerbook G4.
I can send a message later with the OS I am using and maybe you can suggest other help? They told me in the MAC shop to try and get the installation discs. They also said I would be able to get these via Apple's 'media replacement programme' which I cannot find anyway! To be honest, I am not even sure getting the install discs will work but I'll try whatever I need to try and get Photoshop working on it again!
Thanks

Create New Service Session at Solution Manager = Product System missing

We have installed SAP EHP 1 for SAP Solution Manager 7.0 last year but not really use it.
We have setup in the system landscape:
Server (ecc6sbx)
Databases (MCD)
Product System (MCD) => SAP ERP
Assigned them to logical component (eg ZECC6DEV)
RFC destination for MCD was generated
SDCCN Administration at solutions manager display MCD with SDCCN status in green color.
At the satellite system MCD, SDCCN Maintenance job was created and scheduled. Initial single run was also done.
There were no issue. Connection to SDCC_OSS was fine.
Back to the SOLUTION_MANAGER transaction, we created a new solution ECC ERP - Development.
In the Solution Landscape => Solution Settings, we have assigned the Logical Component into the System Group.
However when we expand the tree, and click on the Servers folder it did not display anything.
Click on the Product Systems also did not display anything.
We have another Solution Manager which display information on those Servers and Product Systems folder for satellite system.
Going back to the Solution Manager for the Solution ECC ERP - Development, I tried to Create New Service Session for EarlyWatch Alert. When I click on the Create button, I could only see SAP EarlyWatch Alert for Solutions, there is no SAP EarlyWatch Alert for the Reference Object MCD (<installation number). I could not create a session for MCD.
Does anyone have ideas what I am missing here? I am trying to attached a document which have print screen for reference while creating this message, but there is no such function here.
Adding to link to the document file contain print screen
[Wihtout System and EarlyWatch Selectable.doc|http://www.easy-share.com/1915633524/Wihtout System and EarlyWatch Selectable.doc]
[With System and EarlyWatch.doc|http://www.easy-share.com/1915633514/With System and EarlyWatch.doc]
Edited by: Steven Foo on May 24, 2011 8:00 AM
Edited by: Steven Foo on May 24, 2011 8:18 AM

Anyway, in the solution manger how to we setup earlywatch alert for the SM SID host itself (source system)?
I have the information on the below from our solution manger
The data for this session is overdue. Data has not yet been transferred from the associated satellite system.
Go to the Service Data Control Center (transaction SDCCN) in the satellite system and check why the data has not been sent.
Typical sources of errors are:
The RFC connection for the SAP Solution Manager system is not working.
The 'Task Processor' background job, which collects the session data, has been changed.
Problems arose while data was being collected (see the detail log for the task that collects the session data).
A periodic 'SDCC Maintenance Package' task has not been scheduled to check whether your SAP Solution Manager system requests session data.
I tried to go SDCCN on the solution manager itself and look at the Maintenance Service Definitions:
I get the information:
No suitable RFC Destination found in SDCCN settings.
When I click ok I get the following
No RFC destionation to source system of service definitions available
Delete Service Definitions (radio button selected).
I did not continue and cancel it as I did not want to delete anything.
I check the Task Processor background job is running at SM host itself.
I managed to get the Maintenance Package job running. However it failed with the following
Error refreshing service definitions from destination SM_SSMCLNT001_BACK
Source and target system may not be identical SSM
The source and target system is the same ==> SSM, will this be an issue?

HT1338 Photoshop CS2 opens but wont perform any task (open jpgs, create new jpgs etc). Other CS2 progs such as indesign are fine. MAC shop, couldn't fix, said I should ty install op system 4 Powerbook G4-dont have discs- can I get them? or other solution?

Photoshop CS2 opens but wont perform any task (open jpgs, create new jpgs etc). Other CS2 progs such as indesign are fine. MAC shop, couldn't fix, said I should ty install op system 4 Powerbook G4-dont have discs- can I get them? or other solution?

Hi
I actually dont think its Lion (sorry i put that as couldn't remember) as not on that computer at the moment, its at home, I am at work. I know CS2 is compatable with whatever OS I am using because I can using CS2 indesign etc and I was able to use CS2 photoshop until I updated the Camino browser (I believe this is when it stopped working). I have CS5 but it wont work at all on my Powerbook G4.
I can send a message later with the OS I am using and maybe you can suggest other help? They told me in the MAC shop to try and get the installation discs. They also said I would be able to get these via Apple's 'media replacement programme' which I cannot find anyway! To be honest, I am not even sure getting the install discs will work but I'll try whatever I need to try and get Photoshop working on it again!
Thanks

I have downloaded the iOS6 software on my iPhone4 and now I can't delete/move or create new mail. The bar at the bottom has disappeared. Does anyone have any solutions

I have downloaded the iOS6 software on my iPhone4 and now I can't delete/move or create new mail. The bar at the bottom has disappeared. Does anyone have any solutions?

Hold Power and Home buttons until iPhone restarts. Ignore "Slide to Power off".

Create new solution

Similar Messages

Maybe you are looking for