Create new storage location

Hi all,
How do I create a new storage location.
Thanks in advance.

HI,
New Storage Location can be created by using the T.Code:OX09.
After Executing the T.Code OX09,
Give the Plant Name for which you need to create storage location.
Click on Go to New Entries, Enter S.Loc Code and Description and then save.
Number of Storage Locations created for a Plant can be seen at Table T001L.
Thnaks
Sunil.

Similar Messages

New storage location created in R3- How to push to BW?

HI Friends,
Our R3 consultants created new storage location and how should i push it BW? I checked infoobject: 0Stor_loc. But this is not in 0plant as attribute . How to load the new storage location?
Regards,
Siddhu

Hi,
Storage location infoobject (0STOR_LOC) has to bring as attribute of 0PLANT. Move this from right panel to left so hat storage location will be visible in attributes of Plant.
Sometimes you can maintain as compounding attribute also. Adjust as per your requirement.
Check this once and then load data accordingly.
Also, check the relevant data in ECC before loading to BI.
Hope this helps,
Regards,
Rama Murthy.
Edited by: Rama Murthy Pvss on Nov 26, 2009 6:33 AM

New storage locations for sites

Hi
I have a system landscape of dev, qas and Production systems.
I have a requirement of creating new storage locations for all the existing sites.
But in IS-retail all the store sites are created in WB02.
Many of the sites are not there in dev and qas systems.
Now storage locations being a configurable value i am not able to create new locations in dev system.
Kindly advise how to go ahead
Sunil

You can check in any MM transaction code like in MMBE or in MB52 or in MB51 or in MM03....etc.
In the selection screen of MMBE please go to storage location field and press F4.
Now system will display all storage location with plant and if you wants to see all storage locations belongs to only one plant,in the out put of this field u can enter the specific plant and it will display all storage location for that plant.
I hope it will help.

New Storage location - Old Sales orders

Hi experts
We have created 2 new storage locations and moved materials into them. This has given us a problem regarding our sales orders where the item lines point to the old storage locating and not the new. Is there a smart way to change open sales orders so they point to the new location or do we only have the hard way, and do this manually for each open item line ?
Kind regaards
Jens B Olsen
SKOV A/S
Denmark

Try tcode MASS (object type: BUS2032) to update the Sloc in the sales orders.
Thanks
Swagat

Moving materials to new Storage Locations

We have just re-organised our site and for more detailed control, have created more Storage locations in one particular plant. Consequently, we need to move approx 1000 existing materials from the one location previously in place to the new ones. Is there a quick way of doing this as opposed to the individual GIs and GRs?
Thanks
Jim Jackson

Many thanks, folks for the speedy replies - very much appreciated.
My users are very happy now using MB1B for the initial immediate mass changes required with an option to use the MIGO option if single transfers are needed in the future. As they are all within the same plant some potential difficulties have been removed.
It's now to see these forums actually work brilliantly in discovering transactions etc. you'd never find otherwise.
Best regards to you all
Jim

How to create new storage group and mailbox database on exchange 2007 CCR

Hi, Our Environment:
Exchange 2007 SP3 CCR.
Now I want to create a new storage group with edb file and log files on the new drive.
My plan is as below:
Once we have new drive ready on both active node and passive node,
1): Create new storage group with log files for this new storage group on other new drive from Active Node.
2): Create new mailbox database under this newly created storage group with the DB file on the new drive from active node.
My question is:
1): Do I need to perform above steps from active node only? or Do I need to do it from both active node and passive node?
2): How many storage groups can we create on one Exchange 2007 Enterprise server, we already have 25 SGs in place.
Thanks in advance.

Hi,
Here are my answers you can refer to:
1. We can just create new storage group on the active node. And it’ll be replicated to the passive node.
We can use the following command in EMS to verify the new Storage Group is being replicated to the passive node:
Get-StorageGroupCopyStatus "Second Storage Group" | Select SummaryCopyStatus,CCRTargetNode
http://exchangepedia.com/blog/2007/08/how-to-create-new-storage-group-in-ccr.html
2. For Exchange 2007 enterprise version, we can have up to 50 storage groups:
http://www.computerperformance.co.uk/exchange2007/exchange2007_storage_groups.htm
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Transaction for adding a new storage location?

Hi All
What is the trx for setting up a new storage location?
Thanks in advance
Darren

hi
OX01                 Company Code -> Purchasing Org.
OX02                 Customizing: Company Code Setup
OX03                 Customizing: Business Area Setup
OX06                 Controlling Area: Basic Data
OX08                 Define Purchasing Organization
OX09                 Customize storage locations
OX10                 Customize plant
OX14                 C MM-IV Valuation area - val. level
OX15                 Define internal trading partner
OX16                 Assignment co.code->Internl.trad.ptr
OX17                 Plants -> Purchasing organization
OX18                 Plants->company code
OX19                 Controlling Area: Assgn. to CCode

Regarding extension of materials to new storage location.

Hi ,
Materials sourced from plants CH01,CH03,and LN01 needs to be extended to a new storage location .
Could you please tell me, how it is to be done?
Thanks!
With Regards,
Pritee.

Extend the material to diff sto locations is
T.code : MMSC
enter the material and define the number of storage locations you want extend
Laxman

Create a Storage Location

Hi,
How to create a Storage Location. Plz give me path.
Regards..

Hi,
Path is
SPRO-> Enterprise Structure->Definition-> Material Management-> Maintain Storage location
Regards,
Biju K

To Create New Storage Unit Automatically

Hi all,
I need some info for creating storage bin. I have a material with 100 KG in a storage unit XYZ. And i want to move 20 KG of 100 KG to new storage unit.
First i call BAPI_GOODSMVT_CREATE with movement type 311 with new quant 20 KG to create a new storage unit. After that i call L_TO_CREATE_POSTING_CHANGE for transfer posting.
But it does no effect to material. It have 311 movement successfully but than it puts the 20 KG to the same storage unit XYZ. How can i move it to a new storage unit ?
Regards,
techmaster

If you only want to do a WM transfer (manually with LT01), you can use L_TO_CREATE_SINGLE.
Best Regards, Dirk

Create assign Storage location into Existence Material

Dear Expert in Forums,
I missed to input Storage location in one Existence Material master. Is there any way to assign missing storage location in material master.
Pls help me.
Thanks
Bishnu
02/04

hi there
You can use the transation MM01 for extend the material to an storage location, just go to mm01 give your material code go for organization elements mention your plant where you have already created the material and give the storage location in which you want to extend your material, after view selection when you will press enter the system will issue the message that material already exists and will be extended for say X storage location.
Even you can extend your material to an storage location using transaction MMSC by using materal code and plant combination.
Reward if usefull
Regards
Sujoy

Serial numbers are not copied to new storage location for 311 mvt type

Hi Guys
I have 10 stock of material A in 001 Storage location ,which all the quantity is serial number managed
I have transfered 10 quantity of Material A to 002 location from 001 location using 311 MIGO
But serial numbers are not copied to 002 location after transfer posting
001 and 002 are both are WM linked and belongs to same plant
Can any body suggest good solution,how it can be done

Hi
1.Check in material master whether serial number management is active in Plant data/stor Tab and serial number profile is assigned
2. Check while doing MIGO once if u enter the material and transfer qty you are getting the serial number tab or not
3. If everything is ok, then after posting the document check the serial number status in IQ09, check the stock type and the storgae location in the serdata tab
Regards
Amuthan M

Maintain new storage location for existing material codes

Dear,
We want to extend material master to more storage locations. Currently we have coding starting from 910000 for finish material and is configured for storage location FG01, now we want to extend all the codes with 91 series to storage location PR06 & QC01
The same needs to be done for many other material codes with different series.
Kindly give suggestions/solutions
Thanks
Vikram Sanghvi.

Hi,
You can use extend the material from Plant to plant or from Storage location to storage location.
or 2nd is that Go to SE16 to get all material from MARD Table. then
export in Excel and go to Mass mainteince in material master to extend the material.
try this one
http://www.sap123.com/showthread.php?t=158
this may help U !
Regards,
Pardeep Malik

New Storage location

The external hard drive that I've use for my LR photos is filling up. I've bought a new, larger hard drive. How do I relocate my existing images into the new hard drive so that LR continues to locate them?

On the old external hard drive put all images / image folders into one parent folder. Do this in Lightroom so that LR "knows" what is happening.
Then close LR. In your OS (Mac Finder / Win Explorer) move this parent foder (with all the included sub-folders) to the new hard drive. Depending on how many images you have this may take quite a while. If you prefer, you can copy the parent folder - just to make sure all images have arrived safely on the new hard drive. Warning: At this point do not change the folder structure or folder names!
Now disconnect the old hard drive from the computer and open LR.
You will see - in the folders panel - that all folders have question marks besides them. That is expected. Since you moved the parent folder outtside of LR (in your OS), LR doesn't "know" where your images are.
In the folders panel right-click the parent folder that you created earlier and select <Find missing folder>. Navigate to the location on the new hard drive and click on it. LR will then find all the sub-folders in this parent folder on its own - provided that you have NOT changed the folder names and/or the folder structure.\
WW

Replicate storage location to srm

Hi,
we are using srm 3.0 with ebp 4.0.
We have created new storage location in the R/3 system and replicated them to SRM system.
When i try to add the new stroage location in the org structure for a a user in extended attributes it doesnot get updated.
I select the source system as R/3, doing a F4 search on the Sloc field shows the new storage location and desc for it. but when i add it and click on save button the storage location is shown added but the desc is not there , I cant find the storage location when i am trying to shop.
Thanks
R.M.

hi
did you pull the plant first with associated with sl.
first the plant must pull in to dtm bbp_locmap table.
Storage location replication problem
note 1175255 in our R/3.
br
muthu

Create new storage location

Similar Messages

Maybe you are looking for