Create new system and client with TDMS
Hi all;
I am tested the TDMS product with good results. I want create a new system and do one copy with time reduction time for new development system
What it´s the best solution?
- Install new system and do the client copy with TDMS
or
- System copy of production system, delete production client, create new client with UCUSV of productive system and copy client with TDMS?
Thanks a lot
Hi;
It´s true :).
Ok, one example, I have two systems, I want create system shell from A (client 900) to B . The central system is C
In system B I don´t have any client but the Cross is diferent to system A
I select in TDMS - ERP Shell Creation Package for SAP Release higher 4.6C
System Definition;
- Control system - C (all information it´s correct)
- Sender system - A (Client 900)
But i dont have any information about the receive system (A).
When execute the synchronization appears the system A, but with any information (destination ID)
and I have the error: Could not change password of RFC Destination sender system
Any Idea
thanks a lot for the help
Similar Messages
-
Service Desk: System and client missing when creating a message.
Hi Experts,
I would like to find out if anyone has encountered this problem before. The system and client fields were blanked out and I am unable to select/create the system when creating a message. Thanks!Hello Wein,
If the system/client are grayed out in the workcenters, it is because when creating your BP you've probably created it only for a single system/client. Try to update your BP with another system (tx. BP_GEN).
Hope this will help.
Regards,
Stéphane.
Oups didn't see that the question was marked as answered...
Edited by: Stephane BUSTARRET on Aug 5, 2010 2:40 PM -
Create web service consumer client with Ant and wsdl
How can I create a web service client with just Ant and WSDL?
Thanks.Hi,
Did you check this web log?
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
Eddy -
Logical System and Client copy
Hi Gurus ,
I just now finished ECC 6.0 successfully , I want to take the client copy . But i hacve one doubt , In client creation one TAB logical system is there , Kindly advice me how to create Logical system and steps .
Regards
SelvanHi Manjula ,
Below i mentioned the full detail about the error .
RFC destination for client copy in systems with Financials Basis (FINBASIS) component.
The system could not find any suitable RFC destination for processing for client 000. This note also appears if an RFC destination was found but this does not work. o RFC destination: FINBTR@ID3CLNT000 o Error text: Error during the retrieval of the logon data Proceed as follows to eliminate this error:
1. Start the wizard to create a new RFC connection or perform the following steps manually: 1. Create an RFC destination with the target ZK>source client of client copy (in this case 000).
2. Check whether the RFC destination works in transaction SM59. To avoid errors when assigning the password or the authorizations of the RFC user, use the authorization test Test -> Authorization.
3. Enter the RFC destination: - Transaction: FINB_TR_DEST (Destinations for Transport Methods of the Financials Basis) - Client: 000
4. Start the client copy again.
Kindly advice me
selvan -
Ags_work_incident_create_app - Unable to maintain system and client
Hi,
When creating a support message from the Incident work center, the fields system and client are greyed out and thus not maintainable.
I have no problems creating support messages using the SAPWEBGUI or through transaction NOTIFCREATE, it is only when using the work center. I do not have any other issues in the workcenter, I can display and change support messages.
I have check the security settings and run a security trace which did not come up with anything.
Any advice as to why these fields are greyed out would be greatly appreciated.
ThomasAuthorization problem, issue solved.
-
Adding system and client specific TMS approval steps
Hello,
In defining QA approval steps, how to define a step which is not system and client wide?
When adding a new step, it is automaticaly defined with * in the client and system fields, and when changing the steps, these fields are not editable. However, there are several approval steps for which a specific system and client are entered, but this was done by a consultant, who was here some years ago.
Does anyone know how to do this?
Thanks in advance,
AHi Aleksandra,
Did you ever find a solution to this issue. I too have multiple QA systems in our landscape (4 system landscape), and yet I can not defined system/client specific approval procedures in STMS.
The system and client options don't even appear when I go into change mode, yet table TMSQASTEPS has the options available. Direct table update works fine, but it would be nice to know the "SAP standard" way of doing this.
Cheers
Shaun -
"Create New System Entry" screen
Hello,
I would like to make pre-configured connection settings available to users in my company. When the New button is clicked in SAP Logon the first screen that comes up is "Create New System Entry" with a text of:
"Select one of the available systems from the list below. If you choose the first entry, you can specify the system parameters yourself."
However the only entry in the list is "User Specified System"
How can I populate that list with pre-configured settings for users to choose?
- Regards,
Richard BaileyHi Richard,
Yes the integration between Active Directory and SAP systems management exists. However, the automatic registration of systems in the active directory could have been done during the installation of SAP system itself.
Below could be of help:
SAP Notes 386762 and 608781
http://download.microsoft.com/download/f/3/7/f371bbba-2341-41bf-822d-2c7dd4174756/SS_AD_SAP.doc
http://www.cybersafe.com/d2/prod-and-soln/howto/sapguissoin10min
Regards,
Srikishan -
What is procedure for creating new vendor and material master data in ABAP
What is procedure for creating new vendor and material master data in ABAP .
see below code which is used for creation of vendor master as well as extension...
*& Report ZFC_VENDOR_CREATE *
REPORT ZFC_VENDOR_CREATE LINE-SIZE 100
NO STANDARD PAGE HEADING
MESSAGE-ID ZZ.
TABLES
TABLES : SSCRFIELDS. " Fields on selection screens
CONSTANTS
DATA : C_SPLIT TYPE C VALUE '#'. " Used for Has Separator in GUI_UPLAOD
TYPES
Int'table to hold Vendor Master Data
TYPES : BEGIN OF TY_VENDOR_MASTER,
FLAG TYPE C, " Update Flag
LIFNR TYPE LIFNR, " Vendor Number
BUKRS TYPE BUKRS, " Company Code
KTOKK TYPE KTOKK, " Account Group
ANRED TYPE ANRED, " Title
NAME1 TYPE NAME1_GP, " Name1
NAME2 TYPE NAME2_GP, " Name2
SORTL TYPE SORTL, " Search Term 1
SORT2 TYPE AD_SORT2UL, " Search Term 2
STRAS TYPE STRAS_GP, " Street
PSTLZ TYPE PSTLZ, " Postal Code
ORT01 TYPE ORT01_GP, " City
REGIO TYPE REGIO, " Region
LAND1 TYPE LAND1_GP, " Country
SPRAS TYPE SPRAS, " Language
VBUND TYPE RASSC, " Trading Partner
BANKS TYPE BANKS, " Country
BANKL TYPE BANKK, " Bank Key
BANKN TYPE BANKN, " Bank Account
BKONT TYPE BKONT, " Bank Control Key
BANKA TYPE BANKA, " Name of Bank
AKONT TYPE AKONT, " Reconciliation Account
FDGRV TYPE FDGRV, " Cash Management Group
ZTERM TYPE DZTERM, " Payment Terms
REPRF TYPE REPRF, " Check Double Invoice
ZWELS TYPE DZWELS, " Payment Methods
XPORE TYPE XPORE, " Pay all items separately
END OF TY_VENDOR_MASTER,
Int'table to hold Vendor Extend Data
BEGIN OF TY_VENDOR_EXTEND,
FLAG TYPE C, " Update Flag
LIFNR TYPE LIFNR, " Vendor Number
BUKRS TYPE BUKRS, " Company Code
KTOKK TYPE KTOKK, " Account Group
REF_LIFNR TYPE LIFNR, " Reference Vendor Number
REF_BUKRS TYPE BUKRS, " Reference Company Code
AKONT TYPE AKONT, " Reconciliation Account
FDGRV TYPE FDGRV, " Cash Management Group
ZTERM TYPE DZTERM, " Payment Terms
REPRF TYPE REPRF, " Check Double Invoice
ZWELS TYPE DZWELS, " Payment Methods
XPORE TYPE XPORE, " Pay all items separately
END OF TY_VENDOR_EXTEND,
Int'table to hold Error Records Data
BEGIN OF TY_ERROR,
MSG(200) TYPE C, " To hold Message
LIFNR TYPE LIFNR, " Vendor Number
BUKRS TYPE BUKRS, " Company Code
END OF TY_ERROR.
DATA (Simple Fields)
DATA : W_COUNT TYPE I, " Variable to hold count of Records
W_SUCC_REC TYPE I, " No. of Success Records
W_SUCC_REC1 TYPE I, " No. of Updated Records
W_ERR_REC TYPE I, " No. of Error Records
w_noupdate_rec type i. " No. of Records not Changed
INTERNAL TABLES
Int'table to hold uploaded data from File
DATA : IT_VENDOR_MASTER TYPE STANDARD TABLE OF TY_VENDOR_MASTER,
WA_IT_VENDOR_MASTER TYPE TY_VENDOR_MASTER,
IT_VENDOR_EXTEND TYPE STANDARD TABLE OF TY_VENDOR_EXTEND,
WA_IT_VENDOR_EXTEND TYPE TY_VENDOR_EXTEND,
WA_IT_BDCDATA TYPE BDCDATA,
IT_BDCDATA TYPE STANDARD TABLE OF BDCDATA,
WA_IT_MESSTAB TYPE BDCMSGCOLL,
IT_MESSTAB TYPE STANDARD TABLE OF BDCMSGCOLL,
IT_ERROR TYPE STANDARD TABLE OF TY_ERROR,
WA_IT_ERROR TYPE TY_ERROR,
it_error_fk01 type standard table of ty_error,
wa_it_error_fk01 type ty_error,
it_error_fk02 type standard table of ty_error,
wa_it_error_fk02 type ty_error,
it_succ_rec1 type standard table of ty_error,
wa_it_succ_rec1 type ty_error,
it_noupdate type standard table of ty_error,
wa_it_noupdate type ty_error.
FLAGS
DATA : FL_FLAG1 TYPE C, " Flag to check error upload file
FL_FLAG2 TYPE C, " Flag to hold value
FL_FLAG3 TYPE C, " Flag to hold value
FL_FLAG4 TYPE C. " Flag to hold value
SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-001,
POSITION POS_LOW.
PARAMETERS : P_FILE(128) DEFAULT 'C:\UPLOAD.TXT' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-002,
POSITION POS_LOW.
PARAMETERS : P_VENMAS RADIOBUTTON GROUP R1 DEFAULT 'X'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-003,
POSITION POS_LOW.
PARAMETERS : P_VENEXT RADIOBUTTON GROUP R1.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-004,
POSITION POS_LOW.
PARAMETERS : P_MODE(1) DEFAULT 'N'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-005,
POSITION POS_LOW.
PARAMETERS : P_GROUP(12) DEFAULT 'ZFC_VENDOR_C' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-016,
POSITION POS_LOW.
PARAMETERS : P_GROUP1(12) DEFAULT 'ZFC_VENDOR_U' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN ON
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
Form to get file path for upload of data
PERFORM GET_FILE_PATH.
AT SELECTION-SCREEN ON BLOCK B1.
Form to Validate data specified on Selection Screen
CHECK SSCRFIELDS-UCOMM EQ 'ONLI'.
PERFORM VALIDATE_DATA.
START - OF - SELECTION
START-OF-SELECTION.
IF P_VENMAS = 'X'.
Form to upload data from Presentation Server for Vendor Master
PERFORM UPLOAD_DATA TABLES IT_VENDOR_MASTER.
IF FL_FLAG1 NE 'X'.
SORT IT_VENDOR_MASTER BY LIFNR BUKRS KTOKK.
DELETE IT_VENDOR_MASTER WHERE LIFNR = ' '
AND BUKRS = ' '
AND KTOKK = ' '.
Form to process data for Vendor Master
PERFORM INSERT_VENDOR_MASTER_DATA.
ENDIF.
ELSEIF P_VENEXT = 'X'.
Form to upload data from Presentation Server for Vendor Extend
PERFORM UPLOAD_DATA TABLES IT_VENDOR_EXTEND.
IF FL_FLAG1 NE 'X'.
SORT IT_VENDOR_EXTEND BY LIFNR BUKRS KTOKK.
DELETE IT_VENDOR_EXTEND WHERE LIFNR = ' '
AND BUKRS = ' '
AND KTOKK = ' '.
Form to process data for Vendor Master
PERFORM CHK_AND_INS_VENDOR_EXTEND_DATA.
ENDIF.
ENDIF.
END - OF - SELECTION
END-OF-SELECTION.
IF FL_FLAG1 NE 'X'.
FORMAT COLOR 7.
WRITE:/2 TEXT-O01. " Total Number of records read :
FORMAT COLOR OFF.
WRITE:40 W_COUNT.
FORMAT COLOR 7.
WRITE:/2 TEXT-O02. " Total Number of Success records :
FORMAT COLOR OFF.
WRITE:40 W_SUCC_REC.
FORMAT COLOR 7.
WRITE:/2 TEXT-O07. " Total Number of Updated records :
FORMAT COLOR OFF.
WRITE:40 W_SUCC_REC1.
FORMAT COLOR 7.
WRITE:/2 TEXT-O08. " Total Number of Unchanged records :
FORMAT COLOR OFF.
WRITE:40 W_noupdate_REC.
FORMAT COLOR 7.
WRITE:/2 TEXT-O03. " Total Number of Error records :
FORMAT COLOR OFF.
WRITE:40 W_ERR_REC.
if not it_succ_rec1 is initial.
skip 1.
perform display_changed_report.
endif.
if not it_noupdate is initial.
skip 1.
perform display_nochange_report.
endif.
IF NOT IT_ERROR IS INITIAL.
SKIP 3.
Form to display error data
PERFORM DISPLAY_ERROR_REPORT.
ENDIF.
IF FL_FLAG2 = 'X'.
SKIP 2.
FORMAT COLOR 4.
WRITE:/2 TEXT-O04. " BDC Session Name for Creation (FK01) :
FORMAT COLOR OFF.
WRITE:40 P_GROUP.
perform display_error_report_fk01.
ENDIF.
IF FL_FLAG3 = 'X'.
SKIP 2.
FORMAT COLOR 4.
WRITE:/2 TEXT-O09. " BDC Session Name for Updation (FK02) :
FORMAT COLOR OFF.
WRITE:40 P_GROUP1.
perform display_error_report_fk02.
ENDIF.
ENDIF.
*& Form GET_FILE_PATH
This form is used to get the specified path for uploading of data from
flat file with the help of F4 function key
FORM GET_FILE_PATH .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
IMPORTING
FILE_NAME = P_FILE.
ENDFORM. " GET_FILE_PATH
*& Form VALIDATE_DATA
This form is used to validate the data given by user on the Selection
Screen and the appropriate message is been displayed when an wrong
entry is inputted
FORM VALIDATE_DATA .
IF SY-BATCH EQ 'X'.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E001(ZZ) WITH TEXT-011.
" Excel file not to be used in Batch Mode
ENDIF.
IF P_MODE NE 'A' AND P_MODE NE 'N' AND P_MODE NE 'E'.
MESSAGE E001(ZZ) WITH TEXT-012.
" Session Mode should be either A or N or E
ENDIF.
ENDFORM. " VALIDATE_DATA
*& Form UPLOAD_DATA
This form is used to upload data from Presentation Server for either
Vendor Master or Vendor Extend
FORM UPLOAD_DATA TABLES P_IT_VENDOR.
DATA : L_FILENAME TYPE STRING,
L_FILETYPE TYPE CHAR10 VALUE 'ASC',
L_HEADER_LENGTH TYPE I VALUE 0,
L_READ_BY_LINE TYPE CHAR01 VALUE 'X'.
MOVE P_FILE TO L_FILENAME.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = L_FILENAME
FILETYPE = L_FILETYPE
HEADER_LENGTH = L_HEADER_LENGTH
READ_BY_LINE = L_READ_BY_LINE
HAS_FIELD_SEPARATOR = C_SPLIT
TABLES
DATA_TAB = P_IT_VENDOR
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
IF SY-SUBRC <> 0.
MESSAGE I001(ZZ) WITH TEXT-006 L_FILENAME.
MESSAGE ID SY-MSGID TYPE 'I' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
FL_FLAG1 = 'X'.
ELSEIF P_IT_VENDOR[] IS INITIAL.
MESSAGE I001(ZZ) WITH TEXT-014. " Uploaded File contains no data
FL_FLAG1 = 'X'.
ENDIF.
ENDFORM. " UPLOAD_DATA
*& Form INSERT_VENDOR_MASTER_DATA
This form is used to process BDC data for Vendor Master
FORM INSERT_VENDOR_MASTER_DATA .
DATA : L_LIFNR TYPE LIFNR.
CLEAR : L_LIFNR.
sort it_vendor_master by flag.
LOOP AT IT_VENDOR_MASTER INTO WA_IT_VENDOR_MASTER.
W_COUNT = W_COUNT + 1.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_MASTER-LIFNR
IMPORTING
OUTPUT = WA_IT_VENDOR_MASTER-LIFNR.
if wa_it_vendor_master-flag = 'A'.
SELECT SINGLE LIFNR
FROM LFB1
INTO L_LIFNR
WHERE LIFNR = WA_IT_VENDOR_MASTER-LIFNR
AND BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
IF SY-SUBRC EQ 0.
WA_IT_ERROR-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_ERROR-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
WA_IT_ERROR-MSG = TEXT-015.
APPEND WA_IT_ERROR TO IT_ERROR.
W_ERR_REC = W_ERR_REC + 1.
CLEAR : WA_IT_ERROR, L_LIFNR.
ELSE.
REFRESH IT_BDCDATA.
CLEAR IT_BDCDATA.
PERFORM POPULATE_BDC_DATA_VEN_MASTER.
PERFORM CALL_TRANSACTION.
ENDIF.
CLEAR : WA_IT_VENDOR_MASTER.
elseif wa_it_vendor_master-flag = 'C'.
IF FL_FLAG2 = 'X' and fl_flag4 ne 'X'.
PERFORM CLOSE_BDC_SESSION.
fl_flag4 = 'X'.
ENDIF.
REFRESH IT_BDCDATA.
CLEAR IT_BDCDATA.
PERFORM POPULATE_BDC_DATA_VEN_MASTER.
PERFORM CALL_TRANSACTION_FK02.
CLEAR : WA_IT_VENDOR_MASTER.
elseif wa_it_vendor_master-flag = 'N'.
WA_IT_noupdate-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_noupdate-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
WA_IT_noupdate-MSG = TEXT-018.
APPEND WA_IT_noupdate TO IT_noupdate.
W_noupdate_REC = W_noupdate_REC + 1.
CLEAR : WA_IT_noupdate, WA_IT_VENDOR_MASTER.
endif.
ENDLOOP.
IF FL_FLAG3 = 'X'.
PERFORM CLOSE_BDC_SESSION.
ENDIF.
ENDFORM. " INSERT_VENDOR_MASTER_DATA
*& Form POPULATE_BDC_DATA_VEN_MASTER
This form is used to populate BDC data of Vendor Master
FORM POPULATE_BDC_DATA_VEN_MASTER .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_MASTER-ZTERM
IMPORTING
OUTPUT = WA_IT_VENDOR_MASTER-ZTERM.
IF WA_IT_VENDOR_MASTER-REPRF = 'Y'.
WA_IT_VENDOR_MASTER-REPRF = 'X'.
ENDIF.
IF WA_IT_VENDOR_MASTER-XPORE = 'Y'.
WA_IT_VENDOR_MASTER-XPORE = 'X'.
ENDIF.
if wa_it_vendor_master-flag = 'A'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0105',
BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_MASTER-LIFNR,
BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_MASTER-BUKRS,
BDC_FIELD USING 'RF02K-KTOKK' WA_IT_VENDOR_MASTER-KTOKK,
BDC_FIELD USING 'BDC_OKCODE' '/00'.
elseif wa_it_vendor_master-flag = 'C'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0106',
BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_MASTER-LIFNR,
BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_MASTER-BUKRS,
BDC_FIELD USING 'BDC_OKCODE' '=MALL',
BDC_DYNPRO USING 'SAPMF02K' '0106',
BDC_FIELD USING 'RF02K-D0110' 'X',
BDC_FIELD USING 'RF02K-D0120' 'X',
BDC_FIELD USING 'RF02K-D0130' 'X',
BDC_FIELD USING 'RF02K-D0210' 'X',
BDC_FIELD USING 'RF02K-D0215' 'X',
BDC_FIELD USING 'RF02K-D0220' 'X',
BDC_FIELD USING 'BDC_OKCODE' '/00'.
endif.
perform :BDC_DYNPRO USING 'SAPMF02K' '0110',
BDC_FIELD USING 'LFA1-ANRED' WA_IT_VENDOR_MASTER-ANRED,
BDC_FIELD USING 'LFA1-NAME1' WA_IT_VENDOR_MASTER-NAME1,
BDC_FIELD USING 'LFA1-NAME2' WA_IT_VENDOR_MASTER-NAME2,
BDC_FIELD USING 'LFA1-SORTL' WA_IT_VENDOR_MASTER-SORTL,
BDC_FIELD USING 'LFA1-STRAS' WA_IT_VENDOR_MASTER-STRAS,
BDC_FIELD USING 'LFA1-ORT01' WA_IT_VENDOR_MASTER-ORT01,
BDC_FIELD USING 'LFA1-PSTLZ' WA_IT_VENDOR_MASTER-PSTLZ,
BDC_FIELD USING 'LFA1-LAND1' WA_IT_VENDOR_MASTER-LAND1,
BDC_FIELD USING 'LFA1-REGIO' WA_IT_VENDOR_MASTER-REGIO,
BDC_FIELD USING 'LFA1-SPRAS' WA_IT_VENDOR_MASTER-SPRAS,
BDC_FIELD USING 'BDC_OKCODE' '/00',
BDC_DYNPRO USING 'SAPMF02K' '0120',
BDC_FIELD USING 'LFA1-VBUND' WA_IT_VENDOR_MASTER-VBUND,
BDC_FIELD USING 'BDC_OKCODE' '/00',
BDC_DYNPRO USING 'SAPMF02K' '0130',
BDC_FIELD USING 'LFBK-BANKS(01)' WA_IT_VENDOR_MASTER-BANKS,
BDC_FIELD USING 'LFBK-BANKL(01)' WA_IT_VENDOR_MASTER-BANKL,
BDC_FIELD USING 'LFBK-BANKN(01)' WA_IT_VENDOR_MASTER-BANKN,
BDC_FIELD USING 'BDC_OKCODE' '=BANK',
BDC_DYNPRO USING 'SAPLBANK' '0100',
BDC_FIELD USING 'BNKA-BANKA' WA_IT_VENDOR_MASTER-BANKA,
BDC_FIELD USING 'BDC_OKCODE' '=ENTR',
BDC_DYNPRO USING 'SAPMF02K' '0130',
BDC_FIELD USING 'BDC_OKCODE' '=ENTR',
BDC_DYNPRO USING 'SAPMF02K' '0210',
BDC_FIELD USING 'LFB1-AKONT' WA_IT_VENDOR_MASTER-AKONT,
BDC_FIELD USING 'LFB1-FDGRV' WA_IT_VENDOR_MASTER-FDGRV,
BDC_FIELD USING 'BDC_OKCODE' '=/00',
BDC_DYNPRO USING 'SAPMF02K' '0215',
BDC_FIELD USING 'LFB1-ZTERM' WA_IT_VENDOR_MASTER-ZTERM,
BDC_FIELD USING 'LFB1-REPRF' WA_IT_VENDOR_MASTER-REPRF,
BDC_FIELD USING 'LFB1-ZWELS' WA_IT_VENDOR_MASTER-ZWELS,
BDC_FIELD USING 'LFB1-XPORE' WA_IT_VENDOR_MASTER-XPORE,
BDC_FIELD USING 'BDC_OKCODE' '=UPDA'.
ENDFORM. " POPULATE_BDC_DATA_VEN_MASTER
*& Form BDC_DYNPRO
This form is used to move data to BDCDATA int'table
FORM BDC_DYNPRO USING PROGRAM TYPE BDC_PROG
DYNPRO TYPE BDC_DYNR.
CLEAR WA_IT_BDCDATA.
WA_IT_BDCDATA-PROGRAM = PROGRAM.
WA_IT_BDCDATA-DYNPRO = DYNPRO.
WA_IT_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_IT_BDCDATA TO IT_BDCDATA.
ENDFORM. " BDC_DYNPRO
*& Form BDC_FIELD
This form is used to move data to BDCDATA int'table
FORM BDC_FIELD USING FNAM TYPE ANY
FVAL TYPE ANY.
CLEAR WA_IT_BDCDATA.
WA_IT_BDCDATA-FNAM = FNAM.
WA_IT_BDCDATA-FVAL = FVAL.
APPEND WA_IT_BDCDATA TO IT_BDCDATA.
ENDFORM. " BDC_FIELD
*& Form CALL_TRANSACTION
This form is used to Call FK01 for processing of data either for
Vendor Master or Vendor Extend. The error records are inserted to
Session which can be processed using SM35
FORM CALL_TRANSACTION .
DATA : L_OPTION TYPE CTU_PARAMS,
L_SUBRC TYPE SYSUBRC.
REFRESH IT_MESSTAB.
CLEAR IT_MESSTAB.
L_OPTION-DEFSIZE = 'X'.
L_OPTION-DISMODE = P_MODE.
L_OPTION-UPDMODE = 'S'.
CALL TRANSACTION 'FK01'
USING IT_BDCDATA
MESSAGES INTO IT_MESSTAB
OPTIONS FROM L_OPTION.
L_SUBRC = SY-SUBRC.
IF L_SUBRC = 0.
W_SUCC_REC = W_SUCC_REC + 1.
ELSE.
IF FL_FLAG2 NE 'X'.
PERFORM OPEN_BDC_SESSION.
FL_FLAG2 = 'X'.
ENDIF.
PERFORM BDC_INSERT.
W_ERR_REC = W_ERR_REC + 1.
PERFORM ERROR_RECORD_DATA.
ENDIF.
ENDFORM. " CALL_TRANSACTION
*& Form OPEN_BDC_SESSION
Form used to open session for Error out Records
FORM OPEN_BDC_SESSION .
DATA : L_USERID TYPE APQ_MAPN, " Variable to hold user-id
L_GROUP TYPE APQ_GRPN. " Variable to hold value
MOVE P_GROUP TO L_GROUP.
MOVE SY-UNAME TO L_USERID.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = L_GROUP
KEEP = SPACE
USER = L_USERID
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-008. " Unable to open BDC Session
ENDIF.
ENDFORM. " OPEN_BDC_SESSION
*& Form BDC_INSERT
This form is used to insert error records to a Session method
FORM BDC_INSERT .
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FK01'
TABLES
DYNPROTAB = IT_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-009. " Unable to Insert Data to BDC Session
ENDIF.
ENDFORM. " BDC_INSERT
*& Form ERROR_RECORD_DATA
This form is used to process the messages for the error records which
will be displayed on the output report
FORM ERROR_RECORD_DATA .
DATA : L_LINES TYPE I,
L_MSG(200) TYPE C.
DESCRIBE TABLE IT_MESSTAB LINES L_LINES.
READ TABLE IT_MESSTAB INTO WA_IT_MESSTAB INDEX L_LINES.
IF SY-SUBRC = 0.
CLEAR L_MSG.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = WA_IT_MESSTAB-MSGID
LANG = SY-LANGU
NO = WA_IT_MESSTAB-MSGNR
V1 = WA_IT_MESSTAB-MSGV1
V2 = WA_IT_MESSTAB-MSGV2
V3 = WA_IT_MESSTAB-MSGV3
V4 = WA_IT_MESSTAB-MSGV4
IMPORTING
MSG = L_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WA_IT_ERROR_fk01-MSG = L_MSG.
ENDIF.
IF P_VENMAS = 'X'.
WA_IT_ERROR_fk01-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_ERROR_fk01-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
ELSEIF P_VENEXT = 'X'.
WA_IT_ERROR_fk01-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
WA_IT_ERROR_fk01-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
ENDIF.
APPEND WA_IT_ERROR_fk01 TO IT_ERROR_fk01.
CLEAR WA_IT_ERROR_fk01.
ENDIF.
ENDFORM. " ERROR_RECORD_DATA
*& Form CLOSE_BDC_SESSION
Form used to close session of the Error Records
FORM CLOSE_BDC_SESSION .
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-010. " Unable to Close BDC Session
ENDIF.
ENDFORM. " CLOSE_BDC_SESSION
*& Form CHK_AND_INS_VENDOR_EXTEND_DATA
This form is used to process BDC data for Vendor Extend
FORM CHK_AND_INS_VENDOR_EXTEND_DATA .
DATA : L_LIFNR TYPE LIFNR.
CLEAR : L_LIFNR, fl_flag4.
sort it_vendor_extend by flag.
LOOP AT IT_VENDOR_EXTEND INTO WA_IT_VENDOR_EXTEND.
W_COUNT = W_COUNT + 1.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_EXTEND-REF_LIFNR
IMPORTING
OUTPUT = WA_IT_VENDOR_EXTEND-REF_LIFNR.
if wa_it_vendor_extend-flag = 'A'.
SELECT SINGLE LIFNR
FROM LFB1
INTO L_LIFNR
WHERE LIFNR = WA_IT_VENDOR_EXTEND-REF_LIFNR
AND BUKRS = WA_IT_VENDOR_EXTEND-REF_BUKRS.
IF SY-SUBRC NE 0.
WA_IT_ERROR-LIFNR = WA_IT_VENDOR_EXTEND-REF_LIFNR.
WA_IT_ERROR-BUKRS = WA_IT_VENDOR_EXTEND-REF_BUKRS.
WA_IT_ERROR-MSG = TEXT-007.
APPEND WA_IT_ERROR TO IT_ERROR.
W_ERR_REC = W_ERR_REC + 1.
CLEAR : WA_IT_ERROR, L_LIFNR.
ELSE.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_EXTEND-LIFNR
IMPORTING
OUTPUT = WA_IT_VENDOR_EXTEND-LIFNR.
SELECT SINGLE LIFNR
FROM LFB1
INTO L_LIFNR
WHERE LIFNR = WA_IT_VENDOR_EXTEND-LIFNR
AND BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
IF SY-SUBRC EQ 0.
WA_IT_ERROR-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
WA_IT_ERROR-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
WA_IT_ERROR-MSG = TEXT-015.
APPEND WA_IT_ERROR TO IT_ERROR.
W_ERR_REC = W_ERR_REC + 1.
CLEAR : WA_IT_ERROR, L_LIFNR.
ELSE.
REFRESH IT_BDCDATA.
CLEAR IT_BDCDATA.
PERFORM POPULATE_BDC_DATA_VEN_EXTEND.
PERFORM CALL_TRANSACTION.
ENDIF.
ENDIF.
CLEAR : WA_IT_VENDOR_EXTEND.
elseif wa_it_vendor_extend-flag = 'C'.
IF FL_FLAG2 = 'X' and fl_flag4 ne 'X'.
PERFORM CLOSE_BDC_SESSION.
fl_flag4 = 'X'.
ENDIF.
REFRESH IT_BDCDATA.
CLEAR IT_BDCDATA.
PERFORM POPULATE_BDC_DATA_VEN_extend.
PERFORM CALL_TRANSACTION_FK02.
CLEAR : WA_IT_VENDOR_EXTEND.
elseif wa_it_vendor_extend-flag = 'N'.
WA_IT_noupdate-LIFNR = WA_IT_VENDOR_extend-LIFNR.
WA_IT_noupdate-BUKRS = WA_IT_VENDOR_extend-BUKRS.
WA_IT_noupdate-MSG = TEXT-019.
APPEND WA_IT_noupdate TO IT_noupdate.
W_noupdate_REC = W_noupdate_REC + 1.
CLEAR : WA_IT_noupdate, WA_IT_VENDOR_EXTEND.
endif.
ENDLOOP.
IF FL_FLAG2 = 'X'.
PERFORM CLOSE_BDC_SESSION.
ENDIF.
if fl_flag3 = 'X'.
PERFORM CLOSE_BDC_SESSION.
ENDIF.
ENDFORM. " CHK_AND_INS_VENDOR_EXTEND_DATA
*& Form POPULATE_BDC_DATA_VEN_EXTEND
This form is used to populate BDC data of Vendor Extend
FORM POPULATE_BDC_DATA_VEN_EXTEND .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_EXTEND-ZTERM
IMPORTING
OUTPUT = WA_IT_VENDOR_EXTEND-ZTERM.
IF WA_IT_VENDOR_EXTEND-REPRF = 'Y'.
WA_IT_VENDOR_EXTEND-REPRF = 'X'.
ENDIF.
IF WA_IT_VENDOR_extend-XPORE = 'Y'.
WA_IT_VENDOR_extend-XPORE = 'X'.
ENDIF.
if wa_it_vendor_extend-flag = 'A'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0105',
BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_EXTEND-LIFNR,
BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_EXTEND-BUKRS,
BDC_FIELD USING 'RF02K-KTOKK' WA_IT_VENDOR_EXTEND-KTOKK,
BDC_FIELD USING 'RF02K-REF_LIFNR'
WA_IT_VENDOR_EXTEND-REF_LIFNR,
BDC_FIELD USING 'RF02K-REF_BUKRS'
WA_IT_VENDOR_EXTEND-REF_BUKRS,
BDC_FIELD USING 'BDC_OKCODE' '/00'.
elseif wa_it_vendor_extend-flag = 'C'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0106',
BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_extend-LIFNR,
BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_extend-BUKRS,
BDC_FIELD USING 'RF02K-D0210' 'X',
BDC_FIELD USING 'RF02K-D0215' 'X',
BDC_FIELD USING 'BDC_OKCODE' '/00'.
endif.
perform :BDC_DYNPRO USING 'SAPMF02K' '0210',
BDC_FIELD USING 'LFB1-AKONT' WA_IT_VENDOR_EXTEND-AKONT,
BDC_FIELD USING 'LFB1-FDGRV' WA_IT_VENDOR_EXTEND-FDGRV,
BDC_FIELD USING 'BDC_OKCODE' '=/00',
BDC_DYNPRO USING 'SAPMF02K' '0215',
BDC_FIELD USING 'LFB1-ZTERM' WA_IT_VENDOR_EXTEND-ZTERM,
BDC_FIELD USING 'LFB1-REPRF' WA_IT_VENDOR_EXTEND-REPRF,
BDC_FIELD USING 'LFB1-ZWELS' WA_IT_VENDOR_EXTEND-ZWELS,
BDC_FIELD USING 'LFB1-XPORE' WA_IT_VENDOR_extend-XPORE,
BDC_FIELD USING 'BDC_OKCODE' '=UPDA'.
ENDFORM. " POPULATE_BDC_DATA_VEN_EXTEND
*& Form DISPLAY_ERROR_REPORT
This form is used to display the error records on the output screen
FORM DISPLAY_ERROR_REPORT .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O05. " Error List for Vendor Master
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O06. " Error List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number
17 SY-VLINE,
18 TEXT-H02, " Company Code
31 SY-VLINE,
32 TEXT-H03, " Error Message
100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_ERROR INTO WA_IT_ERROR.
FORMAT COLOR 2.
WRITE:/1 SY-VLINE,
2 WA_IT_ERROR-LIFNR,
17 SY-VLINE,
18 WA_IT_ERROR-BUKRS,
31 SY-VLINE,
32 WA_IT_ERROR-MSG,
100 SY-VLINE.
CLEAR : WA_IT_ERROR.
FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
ENDFORM. " DISPLAY_ERROR_REPORT
*& Form CALL_TRANSACTION_FK02
Form used to Call Transaction FK02
form CALL_TRANSACTION_FK02 .
DATA : L_OPTION TYPE CTU_PARAMS,
L_SUBRC TYPE SYSUBRC.
REFRESH IT_MESSTAB.
CLEAR IT_MESSTAB.
L_OPTION-DEFSIZE = 'X'.
L_OPTION-DISMODE = P_MODE.
L_OPTION-UPDMODE = 'S'.
CALL TRANSACTION 'FK02'
USING IT_BDCDATA
MESSAGES INTO IT_MESSTAB
OPTIONS FROM L_OPTION.
L_SUBRC = SY-SUBRC.
IF L_SUBRC = 0.
W_SUCC_REC1 = W_SUCC_REC1 + 1.
WA_IT_succ_rec1-MSG = Text-017.
IF P_VENMAS = 'X'.
WA_IT_succ_rec1-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_succ_rec1-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
ELSEIF P_VENEXT = 'X'.
WA_IT_succ_rec1-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
WA_IT_succ_rec1-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
ENDIF.
APPEND WA_IT_succ_rec1 TO IT_succ_rec1.
ELSE.
IF FL_FLAG3 NE 'X'.
PERFORM OPEN_BDC_SESSION_fk02.
FL_FLAG3 = 'X'.
ENDIF.
PERFORM BDC_INSERT_fk02.
W_ERR_REC = W_ERR_REC + 1.
PERFORM ERROR_RECORD_DATA1.
ENDIF.
endform. " CALL_TRANSACTION_FK02
*& Form OPEN_BDC_SESSION_fk02
Form used to Open session for FK02
form OPEN_BDC_SESSION_fk02 .
DATA : L_USERID TYPE APQ_MAPN, " Variable to hold user-id
L_GROUP TYPE APQ_GRPN. " Variable to hold value
MOVE P_GROUP1 TO L_GROUP.
MOVE SY-UNAME TO L_USERID.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = L_GROUP
KEEP = SPACE
USER = L_USERID
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-008. " Unable to open BDC Session
ENDIF.
endform. " OPEN_BDC_SESSION_fk02
*& Form BDC_INSERT_fk02
Form used to insert data into BDC session using FK02
form BDC_INSERT_fk02 .
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FK02'
TABLES
DYNPROTAB = IT_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-009. " Unable to Insert Data to BDC Session
ENDIF.
endform. " BDC_INSERT_fk02
*& Form display_changed_report
Form to display Updated Vendor data
form display_changed_report .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O10. " Updated List for Vendor Master
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O11. " Updated List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number
17 SY-VLINE,
18 TEXT-H02, " Company Code
31 SY-VLINE,
32 TEXT-H04, " Message
100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_succ_rec1 INTO WA_IT_succ_rec1.
FORMAT COLOR 2.
WRITE:/1 SY-VLINE,
2 WA_IT_succ_rec1-LIFNR,
17 SY-VLINE,
18 WA_IT_succ_rec1-BUKRS,
31 SY-VLINE,
32 WA_IT_succ_rec1-MSG,
100 SY-VLINE.
CLEAR : WA_IT_succ_rec1.
FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform. " display_changed_report
*& Form display_nochange_report
Form to display No Changed data for Vendors
form display_nochange_report .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O12. " No Changes List for Vendor Master
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O13. " No Changes List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number
17 SY-VLINE,
18 TEXT-H02, " Company Code
31 SY-VLINE,
32 TEXT-H04, " Message
100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_noupdate INTO WA_IT_noupdate.
FORMAT COLOR 2.
WRITE:/1 SY-VLINE,
2 WA_IT_noupdate-LIFNR,
17 SY-VLINE,
18 WA_IT_noupdate-BUKRS,
31 SY-VLINE,
32 WA_IT_noupdate-MSG,
100 SY-VLINE.
CLEAR : WA_IT_noupdate.
FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform. " display_nochange_report
*& Form ERROR_RECORD_DATA1
Form to get Error Message for Changed Vendors
form ERROR_RECORD_DATA1 .
DATA : L_LINES TYPE I,
L_MSG(200) TYPE C.
DESCRIBE TABLE IT_MESSTAB LINES L_LINES.
READ TABLE IT_MESSTAB INTO WA_IT_MESSTAB INDEX L_LINES.
IF SY-SUBRC = 0.
CLEAR L_MSG.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = WA_IT_MESSTAB-MSGID
LANG = SY-LANGU
NO = WA_IT_MESSTAB-MSGNR
V1 = WA_IT_MESSTAB-MSGV1
V2 = WA_IT_MESSTAB-MSGV2
V3 = WA_IT_MESSTAB-MSGV3
V4 = WA_IT_MESSTAB-MSGV4
IMPORTING
MSG = L_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WA_IT_ERROR_fk02-MSG = L_MSG.
ENDIF.
IF P_VENMAS = 'X'.
WA_IT_ERROR_fk02-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_ERROR_fk02-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
ELSEIF P_VENEXT = 'X'.
WA_IT_ERROR_fk02-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
WA_IT_ERROR_fk02-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
ENDIF.
APPEND WA_IT_ERROR_fk02 TO IT_ERROR_fk02.
CLEAR WA_IT_ERROR_fk02.
ENDIF.
endform. " ERROR_RECORD_DATA1
*& Form display_error_report_fk01
Form to display Error Report for Master Vendors (FK01)
form display_error_report_fk01 .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O05. " Error List for Vendor Master (FK01)
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O06. " Error List for Vendor Master Extended (FK01)
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number
17 SY-VLINE,
18 TEXT-H02, " Company Code
31 SY-VLINE,
32 TEXT-H04, " Message
100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_ERROR_fk01 INTO WA_IT_ERROR_fk01.
FORMAT COLOR 2.
WRITE:/1 SY-VLINE,
2 WA_IT_ERROR_fk01-LIFNR,
17 SY-VLINE,
18 WA_IT_ERROR_fk01-BUKRS,
31 SY-VLINE,
32 WA_IT_ERROR_fk01-MSG,
100 SY-VLINE.
CLEAR : WA_IT_ERROR_fk01.
FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform. " display_error_report_fk01
*& Form display_error_report_fk02
Form to display Error Report for changed Vendors (FK02)
form display_error_report_fk02 .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O14. " Error List for Vendor Master (FK02)
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O15. " Error List for Vendor Master Extended (FK02)
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number -
RUNTIME ERROR WHILE CREATING NEW SYSTEM IN EP6
Hi
Can anyone solve my problem, i am geting error while creating new system PORTAL FOR to connect biw 3.5 system
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
Component Name : com.sap.portal.admin.templateselectionwizard.default
com/sap/portal/iviewserver/cache/OClass.
Exception id: 11:29_26/12/06_0014_5891950
See the details for the exception ID in the log file
thanks in advance
Rockhi,
check the log file and let me the the error.
manish -
Problem While Creating New system
Hi.
i have downloaded sap netweaver 7.01(trail version) from SCN.
installation was successful.
Frontend GUI was installed in System Drive(C Drive)
and Netweaver was installed in D Drive
i have started the application server.
in the logon pad what are the details i need to enter while creating new systems in logon pad.
i followed help and typed the same info as in the f1 help.
in connection tab:
connection type: Custom Application Server
System connection parameters:
Description: SAP
Application Server : u9cmain (as in f1 help)
System Number: 00(as in f1 help)
System ID: u9c(as in f1 help)
SAProuter Sring: (empty)(as in f1 help)
after giving this details. when i logged in it shows this "hostname u9cmain unknown, check your application server name"
how can i rectify this error. where can i check my application server name...
help me out plz.>i followed help and typed the same info as in the f1 help.
You can't use the same host name and SIDs as per help under F1
Configure as below:
Description: SAP (You can use anything)
Application Server : (your computer name or IP address)
System Number: (has to be 2 digit, and which numbers you have assiged while installation)
System ID: (your instance name)
SAProuter Sring: (not required) -
Hi
I checked many treads and still I couldn't get a satisfactory explanation to the difference between Business System and Client. I read in help.sap site that multiple business systems can be assigned to a single technical system and also each numbered client of an SAP system is a Unique Business System ? So are client and business system one ? If so why use it interchangably ? And if many business systems can be assigned to the technical system how do we specify a related Integration Server ? As I understand only one Business System can be assigned Integration server. So if we assign many business systems to one technical system then how can we have related Integration server for all ? I couldn't get a satisfactory explanation to this doubt in any thread in this forum
Midhun>>each numbered client of an SAP system is a Unique Business System ?
It could be. But it is not necessary that each client of SAP system is communicating with PI. If it is then there will be one Business System for each client.
>> So are client and business system one ?
No. Client is more substantial category in SAP system. Business system just defines the logical name to these clients if they communicate with PI.
>> If so why use it interchangably ?
Actually they can't be used interchangably always. The only relation is that for each client of SAP system, there could be only one Business system.
>>And if many business systems can be assigned to the technical system how do we specify a related Integration Server ?
For related Integration Server name, you need to select the PI Business system name which would communicate with your business system. For a single SLD scenario you will see PI Dev, Q and Prod business systems.
>> As I understand only one Business System can be assigned Integration server.
Correct. Its a PI Business system.
>> So if we assign many business systems to one technical system then how can we have related Integration server for all ?
For all Business systems of 1 technical system, you need to select the same PI Business system name.
Regards,
Prateek -
Enabling Create New Query and Personalize in Check Status
Hi All,
We followed below steps Enable Create New Query and Personalize in Check Status
Go to the role of the user - PFCG - Authorizations - Change authorization data - Cross-application authorization objects - authorizations for Personal Object Work List (POWL) iViews
Specified the application ID POWL_APPID - SAPSRM_E_CHECKSTATUS
What should be done to enable define query and personalize for all users.
We have changed the following settings -
In activity POWL_CAT - '??' , POWL_LSEL-DISALLOWED - POWL_QUERY - ?? , POWL_RA_AL - ?? , POWL_TABLE - ??.
With our current settings Create New Query and Personalize in Check Status appear but are disabled (greyed out)
New Query Button appears but clicking on it produces no output.
Nikhil
Edited by: Nikhil Malvankar on Sep 12, 2011 5:57 AMYou could the following to check if the Query still exists in the database:
Open SQL Management Studio and connect to the SQL Server hosting the ConfigMgr database
In SQL Managemnt Studio, Expand Database, Expand CM_YourSiteCode
Expand tables and find the dbo.Queries table
Right-click the dbo.Queries table and select Select Top 1000 Rows
See if you can find your "ghost" Query
Please note - it IS NOT supported
to make direct changes to ConfigMgr database so I would properly call PSS on this one before you start getting creative. -
All my photos on my phone are in one album. Is there a way to create new albums and move some of them?
With photos transferred from your computer, you create the albums or folders on your computer.
If you manually manage photo storage on your computer, create a parent folder that will store the named folders of photos you want transferred to your iPhone. Place the named folders of photos in this parent folder and select the parent folder under the Photos tab for your iPhone sync preferences with iTunes followed by a sync. The folders of photos inside of the parent folder on your computer's hard drive will be transferred to your iPhone as separate albums. To add an additional album of photos to your iPhone, place the folder of photos in the parent folder followed by a sync. To remove an album of photos from your iPhone, move the folder of photos outside of the parent folder followed by a sync. -
How create new database and table in java db and how get java db backup
hi master
sir i use stuido creator
sir please give me idea how i create new database
and how create new table and view in this new database
and how get this database backup
how i give this databae backup to isp for deployment
please give me idea with step
thank
aamirCreate your own Value Object (Data Transfer Object) in Java with a structure similar to this and map the fields returned from the database to the fields of that object (preferably using SEtT methods).
Hope this helps. -
How to create new view without interlinking with gantt chart or resource views
ok clear
one another question
In msp how to create new view without interlinking with gantt chart or resource viewsHi Shiv PMC--
I splitted your question above in another thread in order not to have a huge thread with many topics in it.
That being said, I'm not sure to understand. A view is just a manner to display MS Project data with columns. A view can have a table with column (left part) associated with a Gantt chart. It can also just contain a table with no Gantt chart (like the task
table) or a table with a timephased grid (resource and task usage).
Please give us more information, maybe with a concrete example so we can help you.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |
Maybe you are looking for
-
White Macbook with MAJOR wifi reception problems
I live in a small flat and used to be able to access Wifi everywhere on my white Macbook (early 2006) model. This is no longer the case and I can only pick up wifi signal in my living room (i.e. within 7 feet of the router). It is not a router issue
-
i am available for phone upgrade and would like a new phone but do not want to lose the plan i currently have, which includes unlimited data (i got it before verizon stopped it). does anyone know how to upgrade phone, and not change plan?
-
Using toplink running in oc4j in 11.1.1.0.0
Hi, I'm using Toplink 11g Release 1 (11.1.1.0.0) (Build 070624) in a web app running in oc4j. I've noticed that sometimes my changes do not get flushed to the database despite the fact that I see the update and commit in toplink logging. The app does
-
How do you delete specific message from users in Exchange 2013 DAG database?
Our network has been inundated with spam from INTUIT.COM with the SUBJECT: PAYMENT OVERDUE and contains a link to download a form from a Dropbox. Obviously, very suspicious and clearly spam. We're using Postini as our Edge Transport/ Spam filter but
-
Software update won't let go of "iDVD Extra Content"
After update to 7.1.2, every time Software Update runs I see a half gig for this item. I installed it the first time. Still crops up. I tried ignoring it with that Software Update capability. Still crops up next time. Not listed in Apple Downloads an