"Create New System Entry" screen

Hello,
I would like to make pre-configured connection settings available to users in my company. When the New button is clicked in SAP Logon the first screen that comes up is "Create New System Entry" with a text of:
"Select one of the available systems from the list below. If you choose the first entry, you can specify the system parameters yourself."
However the only entry in the list is "User Specified System"
How can I populate that list with pre-configured settings for users to choose?
- Regards,
Richard Bailey

Hi Richard,
Yes the integration between Active Directory and SAP systems management exists. However, the automatic registration of systems in the active directory could have been done during the installation of SAP system itself.
Below could be of help:
SAP Notes 386762 and 608781
http://download.microsoft.com/download/f/3/7/f371bbba-2341-41bf-822d-2c7dd4174756/SS_AD_SAP.doc
http://www.cybersafe.com/d2/prod-and-soln/howto/sapguissoin10min
Regards,
Srikishan

Similar Messages

Creating New System Entry in SAPGUI 7.10

Brief Description of the problem:
I am unable to create a new system entry in SAPGUI 7.10 Logon Pad. It works fine if you choose "Custom Application Server" as Connection Type but when you choose "Group/Server Selection" instead the Next Button is still grayed out and hence unable to create a system.
Earlier even the Group/Server box never used to get populated but after creating sapmsg.ini, i could go one step further and now I think it looks for some value in Saprouter field in order for the Next button to get activated.
__*What I am Looking for:__*
Can anyone tell me how could I incorporate a saproute.ini, as I not clear on the syntax and I never have to use the sapmsg.ini and saproute.ini in SAPGUI 6.40 for users who are connected to Internal network. so this is something new in SAPGUI 7.10 and I am still clueless on why Internal users have to use saproute.ini.
<route name>=<route>
Here <route> has the following form: /H/<hostname where saprouter is running>/S/<service saprouter is running>
So in the above string, how will I find the service Saprouter is running.
Thanks

Thanks for the response.
It will work if you add "sapmsSID 3600/tcp" to the etc\*Services* file.
In SAPGui 6.40, i used to just have sapms00 3600/tcp and it works.
so in SAPGUI 7.10 looks there is a slight change and need to suffix the SID details also. I still don't find any SAPGui 7.10 documentation regarding the change I did in services file.
Surprisingly SAP support was recomending to add router entry inorder to make it work inspite teling them we don't need to access SAP systems through router since we access them internally. No good support from them and they just jump to conclusions and they keep repeating the same thing over and over again even if you try to make them understand that it's not what you need.
Regards
Vipin

Portal Runtime Error while creating new system in portal content

Hi
Can anyone solve my problem, i am geting error while creating new system in p ortal content
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
Component Name : com.sap.portal.admin.templateselectionwizard.default
com/sap/portal/iviewserver/cache/OClass.
Exception id: 11:29_26/12/06_0014_5891950
See the details for the exception ID in the log file

Hi,
Check this link for creating system object
http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N03_BB_InstallGuide_EN_US.doc
Regards
Arun

RUNTIME ERROR WHILE CREATING NEW SYSTEM IN EP6

Hi
Can anyone solve my problem, i am geting error while creating new system PORTAL FOR to connect biw 3.5 system
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
Component Name : com.sap.portal.admin.templateselectionwizard.default
com/sap/portal/iviewserver/cache/OClass.
Exception id: 11:29_26/12/06_0014_5891950
See the details for the exception ID in the log file
thanks in advance
Rock

hi,
check the log file and let me the the error.
manish

Error while creating source system entry in SAP BW system

Hi,
I am creating source system entry in SAP BW system for ECC system.In T-Code RSA1 i entered all the details of source system and BW system like RFC destination of source system and RFC user passowrd.
After clicking on enter system is promting me to enter into the souce system using administrator user.but i don't have admin user with SAP_ALL and SAP_NEW profiles because in my organisation they don't assign these profiles to any user.
So can you please update me what are the authorization required for dialog user in source system.
Regards,
Gaurav

I would recommend to create a USER ID as COMMUNICATION type and assign SAP_ALL for it... this way, it can never be misused..
This will ensure that the user ID will have correct authorization in the source system and will not face any authorization related errors later on

Problem While Creating New system

Hi.
i have downloaded sap netweaver 7.01(trail version) from SCN.
installation was successful.
Frontend GUI was installed in System Drive(C Drive)
and Netweaver was installed in D Drive
i have started the application server.
in the logon pad what are the details i need to enter while creating new systems in logon pad.
i followed help and typed the same info as in the f1 help.
in connection tab:
connection type: Custom Application Server
System connection parameters:
Description: SAP
Application Server : u9cmain (as in f1 help)
System Number: 00(as in f1 help)
System ID: u9c(as in f1 help)
SAProuter Sring: (empty)(as in f1 help)
after giving this details. when i logged in it shows this "hostname u9cmain unknown, check your application server name"
how can i rectify this error. where can i check my application server name...
help me out plz.

>i followed help and typed the same info as in the f1 help.
You can't use the same host name and SIDs as per help under F1
Configure as below:
Description: SAP (You can use anything)
Application Server : (your computer name or IP address)
System Number: (has to be 2 digit, and which numbers you have assiged while installation)
System ID: (your instance name)
SAProuter Sring: (not required)

Create new time entry code

Hi Friends,
Please let me know what is Time entry code and how to create the new time enrty code. Which is used Via CATS.
Thanks & Regards,
John

Hi John,
I'll try to answer with wide brush stroke notes. The details will depend on your need where you will need to dive deeper into the IMG.
(1) In the IMG, go to Time Mgmt > Time Data Recording and Administration > Absences > Absence Catalog > Group Personnel Subareas for Attendances and Absences. Make sure all of your Personnel Subarea Groupings (PSG) are setup.
(2) In the IMG, go to Time Mgmt > Time Data Recording and Administration > Absences > Absence Catalog > Absence Types. Under each appropriate PSG setup your Absence/Attendance Type (A/A Type).
(3) In the IMG, go to Time Mgmt > Time Data Recording and Administration > Absences > Absence Catalog > Determine Entry Screens and Time Contstraint Classes. This may have been setup for you in (2) above.
(4) In the IMG, go to Time Mgmt > Time Data Recording and Administration > Absences > Absence Counting > Assign Counting Rules to Absence Types. This may have been setup for you in (2) above.
(5) In the IMG, go to Time Mgmt > Time Data Recording and Administration > Absences > Absence Counting > Determine Daily Work Schedule Variants for Absence. This may have been setup for you in (2) above.
(6) In the IMG, go to Time Mgmt > Time Data Recording and Administration > Absences > Absence Counting > Define Indicators for the Personal Calendar. This may have been setup for you in (2) above.
(7) Like Absences, do the same for Attendances.
(8) For Quotas (like vacation/paid tiome off), in the IMG, go to Time Mgmt > Time Data Recording and Administration > Managing Time Accounts Using Attendance/Absence Quotas > Calculating Absence Entitlements > Rules for Generating Absence Quotas. Review all of your settings.
(9) In the IMG, go to Time Management > Time Evaluation. Here, you may need to adjust your schema, rules and other config. We use a custome schema "ZM04" modeled after "TM04". I had some changes to a custom rule "ZP20" (modeled after TP20). You may have other changes.
I hope this helps send you down the right path. Thanks.
Erik

Error while Creating New System

Hi,
I am working on the HANA Sandbox and getting the following Error when I am trying to create a new system.
u201CLicense Key could not be installedu201D.
Regards,
Surya Kumar

To revert to the new snapshot, if you don't see the red bar...follow this steps...
Go to Actions (Just below Logout) and press Revert Now.
You will be redirected to the snapshot.
Greetings,
Blag.

Create new system and client with TDMS

Hi all;
I am tested the TDMS product with good results. I want create a new system and do one copy with time reduction time for new development system
What it´s the best solution?
- Install new system and do the client copy with TDMS
or
- System copy of production system, delete production client, create new client with UCUSV of productive system and copy client with TDMS?
Thanks a lot

Hi;
It´s true :).
Ok, one example, I have two systems, I want create system shell from A (client 900) to B . The central system is C
In system B I don´t have any client but the Cross is diferent to system A
I select in TDMS - ERP Shell Creation Package for SAP Release higher 4.6C
System Definition;
- Control system - C (all information it´s correct)
- Sender system - A (Client 900)
But i dont have any information about the receive system (A).
When execute the synchronization appears the system A, but with any information (destination ID)
and I have the error: Could not change password of RFC Destination sender system
Any Idea
thanks a lot for the help

B1if BizSteps that create new systems in SLD

Hi,
I want to create scenario that creates new updates system in SLD. I read in documentation that using B1if API new jobs can be added to JobCreator and JobExecutor. Is there any help or tutorial that shows how to create job step by step and use them to create, update or delete systems in SLD?
Regards
Szymon

As per my understand, when you create a new company, you have to undergo upgrade SAP Server procedure, at this time SDL of your new company is created.
IF you are talking about document like B1PO to B1SO, then you have to refer other document.
Thanks
Kevin

ISE 1.1.3 - Notification when ISE creates New Endpoint Entries

Good Morning,
I am interested in learning how to have notifications sent out to a preset list of recipients when ISE 1.1.3 creates a new endpoint entry. The ability to know when a foreign device has been connected is imperative for our mission.
I have looked throughout the entirety of the ISE Settings, but I have yet to find where to enable the functionality to allow for this.
Can someone please point me to the correct menu/setting for this?
Thank You,
David

Thank you for the response.
I read through the documentation that you linked me to, and it appears that i *should* be able to create the rules I require. I have tried many different sets of criteria, and I always receive the same Error Message:
type Status report
message Request not processed - Possible XSS input
description The request sent by the client was syntactically incorrect (Request not processed - Possible XSS input).
From the error, it looks like my criteria set is incorrect, but I have tried numerous different sets, all receive the same error. According to the "Rules" section, under "Unknown NAD" the only Required Fields are "Category" and "Nad Count". I have satisfied both of these fields numerous ways, all with the same output of the above error message.
Any Idea what could be causing this?

No CRM 7.0 version available in creating new system in SMSY under CRM

Hi ALL,
I have solution manager 7.0 with SP 14 installed and configuring the maintenance optimizer.
Now, my problem is I want download SP for CRM 7.0 . While creating a new system in SMSY under CRM there is no
option for CRM 7.0 as product version, the latest product available is CRM 2007.
How can I get the right product there or is it Ok to go with the CRM 2007.
Thanks,
Senpai

Hi Sen
If CRM 2007 is not the same as CRM 7.0 then defining it incorreclty might affect configuration or identification of
correct SPs to download
It could be the location of the new CRM product is found under a different naming convention or header
- search other likely product trees for this
Or
- it could be the product is still in ramp-up and not officially released via PPMS - wait for release
- product is just out of ramp-up but no Solution Manager definitions exist - request from SAP
- Solution Manager definitions exist for CRM 7.0 on a higher Solman SP than the one you are operating - upgrade Solman SP or stack
Best wishes
Stuart

Creating new system barcode font on SE73

Hi all...
I'm trying to create a new barcode font based on BC_C128B...
I created a ZXXXXXX with the same attributes...
In the form i put the ZXXXXXX in the codebar field of my char format.
When I run my program and print, i can see the actual characters instead of codebar.
But when i change the barcode to BC_C128B, it prints the codebar correctly...
What am I missing??
Thanks,
Eric

Hi Eric,
In addition to creating the new system barcode, you need to also create the print controls that contain the actual commands that are sent to the printer in the used device type.
i.e. SE73 -> Printer Bar Code -> <Device type>(e.g. HPLJ4000)
In here you have to add the barocde that you created via the 'Create' icon. You can create the ZBC_C128 barcode within the device type and assign two new print controls. e.g.
Device type          HPLJ4000
Bar code             ZBC_C128
Bar code prefix      SBP99
Bar code suffix      SBS99
Then you need to fill the print controls SBP99 and SBS99 with commands similar to SBP21 and SBS21. these commands tell the printer to switch to the barcode font.
Regards,
Aidan

I want to create new popup block screen in CO11N SCREEN for condition check

in standard CO11N screen after completing filling the required field , when i click the save icon I NEED TO CREATE THE POBUP BLOCK SCREEN FOR CONDITION CHECKING WHICH CONSIST
YES NO CANCEL
IS THERE ANY FUNC MODULES TO DO THIS? OR IS IT POSSIBLE BY CODING?

Don't rely on 'Preview'.
Share/Export as .ibooks file and then drag that to iTunes and sync to your iPad.
Still no joy, find a pre-processing recipe ( that includes export for iPad) that doesn't spoil the quality in the process.
Just keep in mind that low quality in means low or lower quality out, in this example.

DSWP - Nothing happens when you create new system

Hi SDN
How are you?
We are on Solution Manager 4.0. I have already defined 3 systems in transaction DSWP.
I have recently applied support packs 9 and 10. Now when I try to define a new system in transaction DSWP, nothing happens.
When I click on the "New: button, I am prompted to enter the system and the Language.
I enter PRD for system and keep the Language as EN.
I then have 2 options "continue" or "cancel".
No matter what button I press, nothing happens.
I then tried to copy an existing system, and again nothing happens.
Any help that you provide would be appreciated.
Thanks
Sam

Hi Ragu
Thanks for the response.
SAP actually came back with a fix.
I had to apply Note 1008717 )HTMLViewer: Postdata of length more than 255 gets)
Once I applied this my problem was fixed.
This was working prior to me implementing SP 9 and 10 on SolMan 4.0. So the above note might be needed for all who implement this support pack.
Thanks again fro the help.
Regards
Sam

"Create New System Entry" screen

Similar Messages

Maybe you are looking for