Create new user for Essbase Integration Services

Hi,I have two users witch creates olap models and metaoutlines.So I would like to create new user at Essbase Integration Services. How to create new user at Essbase Integration Services level?My system:Essbase Server 6.5.1Essbase Integraion Services 6.5.1Essbase Administration Services 6.5.1Thanks,Grofaty

A user at EIS level is actually a user set up on the relational catalog where your olap models/metaoutlines are stored. For instance if you got to the OLAP model properties dialog and the General tab you can see the owner here is the user you use to connect to your catalog. You can also prevent other users from accessing models not owned by them by setting the security option from the drop-down list on this tab.Mark Rixon www.analitica.co.uk

Similar Messages

  • How to create new user for OBIEE presentation service

    Hello Guys
    I now only have 2 users on my OBIEE, demo1, demo2.. Now I'd like to create a new user call A and make this new user able to log on to OBIEE presenation service..
    So I went to the RPD admin tool and created new user there and gave password. It was done online mode and I checked out..
    I am able to login to admin tool with the new user account, but when I go to presentation service, I am not able to see this new user nor would I be able to log on using the new user account..
    So how does this work? If I wanted to create a new user and let it access dashboard, I'd I do it
    Any pointer will be greatly appreciated
    Thanks

    Hi.
    actually there is no option available in presentation service to create user. There you can just delete user and create and delete the groups.
    Anyhow, you said you have created a user in rpd.
    To see this user in answers, you must login into answers with this user once.
    are you able to login with the newly created user?
    (As you said you done the creation of user in online mode, this may not effect to the answers)
    if not, just login with administrator into answers, click on reload server metadata, then log off from there.
    Now, try to login with the new user. You may able to login.
    OR
    just restart your BI Server services.

  • Creating New Users for RDBMS realm

    I am currently creating new users in the RDBMS realm
    by an EJB that will insert into the "Users" table. Is this
    the correct way to create users or should I be calling
    methods on classes in examples.security.RDBMSRealm?
    Thanks
    Bill.

    Thanks a lot for the guideline.
    I can able to create multiple users using Import option of the user administration but i have one more question regarding the same.
    What about the password setting of these newly created users. Or can the set the password field in test file?? Because when we export the user, it is not showing any Password field.
    Thanks & Regards,
    Prashant

  • To create new user for rpd with Admin access in obiee 10g

    Hi All,
    I need to create a user in RPD which has equivalent privileges as Administrator in RPD.Please note that this is for accessing RPD Admin not for Dashboard admin access.Can anyone please let me know of how we shall implement this?..
    Regards,
    Vengatesh.

    Hi,
    Create a user and give the check box for 'Administrators' group and check.
    If required give 'Presentation Service Administrator'group too.
    In Settings->Manage Privileges you can restrict the user to the Answers.
    Hope this helped/ answered
    Kind Regards
    MuRam

  • Cannot create additional user in Essbase Adminstration Services

    I have created the admin user in Admin Services but cannot create any additional users; the option to "create user" is grayed out. It doesn't allow me to use the wizard as well. Can anybody tell me what the problem is and how to resolve it.

    First if you have created the Admin user when you first installed Hyperion, you can't create another user Admin user on the same server. Second, if you created the Admin user without supervisor or create/delete users privileges you can't create other users if you logged in with this user. You mentioned the create/delete is grayed out that means you don't have privileges to create or delete a user if you logged in with that user.
    Also, you may have a problem with your EAS, so try using MaxL or ESSCMD to create users and assign them to groups, check the Tech reference for more details:
    create user Guest identified by 'password' member of group Visitors;

  • Create new user for a LifeDrive

    My wife recently gave me her LifeDrive as she upgraded to a Centrino.I am looking for a way to take her user name off of the life Drive and put mine on so that I can sync it with the desktop from my old hanspring visor so that I can get all of the info that was on the visor onto the Life Drive.
    Does any one know of a way to do this?
    Post relates to: LifeDrive

    I believe you'll have to use the "Export/Import" method in Palm Desktop.
    Export the information to a file, then import it into the Palm Desktop for the Visor.  For example, open Date Book, then go to File/Export and save the info as a file. You can later import this into another username in Palm Desktop.
    Since the Visor is quite old now, the version of your Palm Desktop may need to be upgraded...
    WyreNut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • I created new menu For Manager Self SErvice and added the transfer manager

    Hi SSHR Gurus
    I Manager transfer sshr function to Custom menu.But This function is not functioning the way it works on Manager self service. Any thoughts on this greatly appreciated.
    Cheers
    kumar cs

    Hi kumar,
    You need to double check in your custom menu you have added Manager Menu action without prompt and you setup profile option HR:Manager Actions Menu against responsibility.
    Also, after that you need to bounce Apache and clear cache.
    For more information about Manager Action Menu please refer to note :
    Note 263015.1:Deploying SSHR Capability Implementation Guide
    Chapter 2 page 2-11 ----- > Menus for Managers
    Thanks,
    Mounir

  • Create new user process - BPM11g

    I need to develop a Create New User Process in BPM11g.
    Managers can start this process and create new users for new employee so that the new employee can log in the workspace and start to work.
    How can I achieve this in 11g?
    I find this perhaps involves weblogic authentication and user role API.
    Is anyone familiar with these?

    Hey
    CREATE USER "TEST" PROFILE "DEFAULT"
    IDENTIFIED BY "test" DEFAULT TABLESPACE "USERS"
    ACCOUNT UNLOCK;
    GRANT "DBA" TO "TEST";
    But be careful to grant all privileges (DBA)
    Regards

  • WebCenter Suite: How to create new users ?

    Hi,
    What is the easiest way to create new users for the WebCenter Suite Content DB...
    Regards
    Boris

    Hello,
    I guess you have chosen the file system option. If so you need can drag the jazn-data.xml from your CDB ORACLE_HOME in a JDeveloper project. After right-clicking on this imported file you can select the properties. Now you are in a wizard to create users and groups/roles. After modifying your file you can replace it on the server. To find the right location of the jazn-data.xml you can go to the EM Site http://<host>:<port>/em/console/ias/oc4j/sec/secProvs to look for the security provider of the "content" application. Edit the provider and you will see the location of the jazn-data.xml.

  • Content DB: How to create new users ?

    Hi,
    What is the easiest way to create new users for the Content DB via OID...
    Regards
    Boris

    - http://hostname:7777/oiddas/
    - connect with orcladmin
    - Tab Directory
    - Tab Users : click on Create

  • Can't create new users in Administration Services Console

    Hi,
    I am following directions in the Essbase DBA guide for creating new users, as it says you must create a partition user to work with Samppart and Sampeast applications. It tells me to log on to Administration Services Console, go to the Administration Server, and right-click on users to create a new user. However, when I right-click, the option to Create New User is light grey and not clickable, neither is the option to refresh users. Can anyone tell me why I can't create a new user? I am logged in with the username: admin password: password that I set during configuration and that should be the Administrative account.

    Hi,
    What version are you using? If it is 9 then you need to create the user in shared services. I just checked and the option to create a user is greyed out for me too and I am an admin.
    It sounds like you haven't externalised the users which is why the option to do a refresh is not there.
    Thanks,
    Nathan

  • HT201240 This process does not appear to work for me.  I'm running 10.8.3.  I created a new user for a guest staying with me.  They have gone now and I am attempting to either change the password or delete the user.  It won't allow me to choose the user I

    This process does not appear to work for me.  I'm running 10.8.3.  I created a new user for a guest staying with me.  They have gone now and I am attempting to either change the password or delete the user.  It won't allow me to choose the user I created.  I am logged in as myself and it states that I am an "Admin".  The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users. 
    Can someone help me?  I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on?  What if this were my child?  This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
    Any help would be appreciated.  (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
    Thanks.

    Here are two screen shots to show you what I am seeing.  The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as).  The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue).  However when I click on the user "Orion" nothing happens.  It will not change to highlight that user.

  • Create a new user for oracle 10G ASM instance with sysdba system privilege

    Hi,
    In our Golden Gate Project, we require the SYS user credential to connect to the Oracle 10g  ASM instance to read the database transaction logs.But our client is not providing the SYS user credential to  connnect to ASM instance.
    I'm getting the error message "ORA-01109:  database not open",When I tried to create a new user using the  below the steps in oracle 10g ASM instance
    1. Login using "sqlplus / as sysdba"
    2. Create user <username> identified by <password>;
    But in oracle 11g ASM instance, I'm able to create new  user  by connecting the ASM instance with SYSASM role without issues.
    Is there is any workaround to create a new user with sysdba system privilege in oracle 10g ASM instance?.
    Thanks in advance .

    Hi,
    Recreate the password file for the ASM instance as follows:
    Unix:
    orapwd file=<ORACLE_HOME>/dbs/PWD<SID> password=<sys_password>
    Windows:
    orapwd file=<ORACLE_HOME>/database/PWD<SID>.ora password=<sys_password>
    Now sys password is reset, we are ready to use sys for ASM management. I decided to create another user ASMDBA as I tried above.
    SQL> create user ASMDBA identified by test01;
    User created.
    SQL> grant SYSASM, SYSOPER to ASMDBA;
    Grant succeeded.
    SQL> select * from v$pwfile_users;
    USERNAME SYSDBA SYSOPE SYSASM
    SYS TRUE TRUE TRUE
    ASMDBA FALSE TRUE TRUE
    Please see this link : http://orachat.com/how-to-change-asm-sys-password-creating-sysasm-user-11g/
    Thank you

  • I'm new to SQL Server Integration Services and I need help on how to begin learning SSIS. Is there any training for it besides msdn?

    I'm new to SQL Server Integration Services and I need help on how to begin learning SSIS. Is there any training for it besides msdn?

    Check this thread where people have already given their suggestion on learning SSIS
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/f2cc1cf3-204d-454a-a189-47df87a3aa23/i-want-to-learn-ssis?forum=sqlintegrationservices
    I would suggest to go for You tube videos (type learn SSIS or begin SSIS step by step) you will get lot of good tutorials to start with.
    Happy Learning!!
    If this post answers your query, please click "Mark As Answer" or "Vote as Helpful".

  • Sample workflow for Create new user in IDM

    Hi,
    I'm new to Identity Manager. I had obtain task to create new workflow with this requirements:
    - create new user
    - make some approvals
    - deploy this user to some resource (AD, LDAP, SQL)
    I have problem with first step. I tried to create user by the help of http://www.javapassion.com/idm/ create user samples, but I'm affraid that mentioned samples aren't enough for real deployment. They are good for understanding of IDM.
    So I decided to explore workflows/rules that are used as default in IDM. I think Create User dialog that is in menu Accounts -> List Accounts -> New Actions -> New User . But I'm not sure which workflow is used for this dialog. Is it Create User in ProvisioningTask, or some template in TaskDefinition, or Create User Template in TaskTemplate, or something another?
    (I'm listing this templates through List Object in Debug interface).
    I appreciate every help
    Petr

    Chapo,
    thanks a lot for informations. I have try to find corresponding process mapping for 'Create User' under Configure tab. I found process 'createUser'. So I looked for 'createUser' workflow under 'Task definition' or 'Configuration' in debug. But there was no such workflow. Only workflow with similar name was 'Create Resource User', but it doesn't look like right workflow. I expected workflow with name 'Create User'. Does anybody have this workflow under 'Task Definition' in debug?

Maybe you are looking for