Create number range and assign new product id

hi,
can anyone tell me the steps to create the number range and assign it to the product id..
and replace existing product id to the new one through program or.. is there any standard program is available to change the product id
thanks
dinesh

Hi Dinesh,
Agree with Arden, I think there is no number range feature for product IDs. You can have your own number range object and intervals with custom solution on UI to create product IDs sequentially.
I am not sure but have a look at the TCode: COMC_MATERIALID_ALL which may be doing what you need.
You cannot change the product ID once created I think.
You can change the category assignment of the products through the report : COM_PRODUCT_RECATEGORISATION
Check enhancement spot : CRM_PRODIL_EXIT which has got some methods for CREATE and MODIFY Products.
Hope this will be useful.
Regards,
Naresh

Similar Messages

Steps to create and assign new cost centers?

Dear all,
Pls share with me the steps to create and assign new cost centers.
TIA
kogi

Refer to the following link, will help you with the cost Center creation.
http://help.sap.com/saphelp_470/helpdata/en/08/5145cc43b511d182b30000e829fbfe/frameset.htm
It is actually the job of Fi consultants.
Post your e-mail ID I will send some documentation.
Regards
AK
Reward points if helpful

Not able to created Number Ranges for Asset Classes in AS08

Dear Friends,
I am not able create Number Ranges for Asset Classes in AS08.
It is giving me an error message as company code does not exist.
When I Check Consistency under path SPRO -> Financial Accounting -> Asset Accounting -> Preparing for Production Startup -> Check Consistency -> Overview Report: Company Codes. I am getting the following
RSOL Reliance Sealink One PLtd
CoCode no. alloc.    NKTR
Fiscal Year Variant V3   Apr.- March, 4 special periods
Start 2nd half month 00
Transfer date        31.03.2006
Chart of dep.        TOLL Chart of Depreciation - For Highway Projects
Net worth tax        01   Book depreciation as per Compinies Act 1956
Enter net book value
Status company code 2
Current fiscal year 2007
Doc. type dep. pstng AF   Dep. postings
> Number range &1 in co.code &2 for doc.type &3 must be defined as internal
Calc.insur.value
Input tax exempt
If you see the above first two line you will find the difference is that Company code RSOL in the first line and NKTR company code in the second line.
Actually CoCode no. alloc. has been wrongly copied as NKTR while copying CoCode it should be RSOL and not NKTR.
I think because of this wrong allocation it is giving me an error in AS08. Also it is not showing me CoCode in drop down list in AS08.
Please help me to resolve the problem.
Thanks
Rahul Jain

Look in TC OAOB if the company code is assigned to a chart of depreciation

ECM-number range and authorization contorl doubt

Hello Team,
I have below scenario and need help on the same.
1) I need to differentiate change master and ECR with number range can this be done?
2) For Team A - need to give only ECR and change master active status control. For Team B- Only change master but in inactive status control How to achieve this?
3) I have created profiles with status profiles under enge change mang section , but how to make this field mandatory in CC31 or CC01 screen? I browsed and got info like should be activated etc...but i was not able to activate the profiles which were created in Engg. change management section.
Regards,
satish

Dear Satish,
1.If my understanding is correct then its internally in the system for the type - Change master and ECR the change number
object used is AENNR and where in you can assign a common number range group and it will be used for creating change
numbers of both these types.It's not as like the production order type where you can link a different number ange for each
order type.
2.Try whether this option will work out for meeting your requirement.In the standard SAP 2 set of number range (one
internal numbe range and one for external will be assigned) exists.so aaume for CC01 you can make use of the internal
number range,where during CC01 without any value for the field change number you can proceed.When creating through
CC31 you can make use of external number range by giving the change number as the input and you save the data.
check and revert back.
Regards
Mangalraj.S

How to create number ranges with "OK60" transaction or any other.

Hello,
I need to create a new number range to asigne to a document type , using transaction OK60 ( the error says this transaction).
but I only can display with this transaction, and I would like to update.
Is there any other transaction to do this , or is there any way to do this with this transaction OK60?
Thank you very much.
Kind regards
Olga

Hi,
OK60 indeed is used for creating number ranges for FI/CO earmarked funds transactions. You should press on 'Pencil' button and create an interval. If for some reasons, you cannot do this via this transaction, try using SNRO transaction, with IRW_BELEG parameter. If this also fails, then apply to BASIS team to check your authorizations.
Regards,
Eli

Business Partner - Number Ranges and Groupings

Hello,
A few weeks ago, we are activated RMCA components and activated Telecommunications 6.0 in a sand box client.
Now we are doing customizing and application of BP.
We want, and we could, to range BP in number range from 1 to 9999999999, as the costumers appear in our CRM system. But the problem is that we cannot do the same with AR/SD costumers because we already have old AR/SD costumers, not the same person, in the same range and we don't have not used range.
I know that we can to convert AR/SD costumers groups, but that problem is that we need to convert costumers number.
How we can open in the same number, the BP and AR/SD costumer? Can we reorganize the old SD costumers?
We sure that we are not the first company that implement RMCA in the middle of life cycle that already have AR/SD costumers.
With best regards,
Galia Ribinik.
Edited by: Yes SAP Team on Jan 8, 2012 7:53 AM

RM-CA: Number ranges and groupings
Choose the following in the Customizing: Cross-Application Components ® SAP Business Partner ® Business Partner ® Basic Settings ® Number Ranges and Groupings.
Define the corresponding number ranges externally in RM-CA and ensure that this RM-CA number range includes both the internal and external CRM number range.
You can choose any name for the group, but it must be the same as the name in CRM.
SD Customer Mapping
Choose the following in Customizing: Financial Accounting ® Accounts Receivable and Accounts Payable ® Customer Accounts ® Master Data ®Preparations for Creating Customer Master Data ® Create Number Ranges for Customer Accounts.
If you also want to create an SD customer during business partner replication, you must create a separate number range for this customer. Assign this number range to the corresponding account group. Choose the following in Customizing: Financial Accounting ® Accounts Receivable and Accounts Payable ® Customer Accounts ®Master Data ® Preparations for Creating Customer Master Data ® Assign Number Ranges to Customer Account Groups.
·SD Customer Mapping
Choose the following in Customizing: Financial Accounting ® Accounts Receivable and Accounts Payable ® Customer Accounts ® Master Data ® Preparations for Creating Customer Master Data ®Define Account Groups with Screen Layout (Customers).
You must reconcile the account group settings for the business partner with the corresponding field groups for the business partner in CRM. If for example a field in RM-CA is not defined as a mandatory field in CRM, replication will fail if an entry has not been made in this field in CRM.
Use the PIDE transaction to control which CRM business partner classification is mapped to a specific account group in RM-CA.
Define the reverse situation here using the corresponding number range grouping.
· Create and assign an SD sample customer
To generate an SD customer in RM-CA during the business partner replication, you require a reference business partner. This is used as a template during creation.
Choose the following in the system: Logistics ® Sales and Distribution ® Master Data ® Business Partner ® Customer ® Create ® Sales and Distribution (Transaction VD01).
Create the sample customer using the account group described in the preceding step. The system name for the sample customer must start with the letters u201CMUSTu201D (such as MUSTER_TELCO).
You must also create the sales area data for the customer. Note that you must maintain each sales area used accordingly.
· Assign SD sample customer
Assign the sample customer in the TCRMBP_REFCUST table (transaction SM30) and define the corresponding determination. If you only want the system to determine a specific sample customer, you can leave the Business partner category, Group and Partner type fields blank.
http://help.sap.com/saphelp_telecom472/helpdata/en/65/d7a55dadd52348ad73320774783649/content.htm

Create Number range

I have to create a number range for OM ids . OM ids will be assigned to organistion units . OM ids will be unique and cannot be assigned to more then one org units . Please tell me the steps to create Number range which should start with 10000 till 99999.
Waiting for reply.

Thanks Guys
I had already done what 'Jatra Riwayanto ' suggested now . It is better if before getting the next number via FM 'NUMBER_GET_NEXT' we should lock the number range object using FM 'NUMBER_RANGE_ENQUEUE' and after getting the number unlocks the number range ob ject using FM 'NUMBER_RANGE_DEQUEUE' .
Sample code
CALL FUNCTION 'NUMBER_RANGE_ENQUEUE'
EXPORTING
object = 'ZPOMID'
EXCEPTIONS
foreign_lock = 1
object_not_found = 2
system_failure = 3
OTHERS = 4.
IF sy-subrc = 0.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
nr_range_nr = '01'
object = 'ZPOMID'
IMPORTING
number = NEXT_NUMBER
quantity = quant
returncode = code
EXCEPTIONS
interval_not_found = 1
number_range_not_intern = 2
object_not_found = 3
quantity_is_0 = 4
quantity_is_not_1 = 5
interval_overflow = 6
buffer_overflow = 7
OTHERS = 8.
CALL FUNCTION 'NUMBER_RANGE_DEQUEUE'
EXPORTING
object = 'ZPOMID'
EXCEPTIONS
object_not_found = 1
OTHERS = 2.
ENDIF.
Thanks Buddies , full points awarded.

Unable to create number range in AS08

Hello everyone.
We have a strange situation in transaction AS08 when we try to define a new number range:
- we define a new number range which is not part of any other defined number range, confirm the entry and save it
- system says that the changes were saved
- when we exit the AS08 transaction and enter it again, the number range is not there
- we checked NRIV table, the entry is not saved there either
- company code is maintained in AO11
We also tried creating a number range interval which is not a part of any other interval (included in NRIV table), but that didnt help. Also, the problem exists both for internal and external number ranges.
Can anyone give some advice on what should we look up or maybe someone had similar situation and found the way to solve it?
Thanks in advance!
Marko

This appears to be a bug.
You need to enter the Number Range and save without pressing Enter.
If you press Enter and then save you will get a message saying that the data was saved but table NRIV will not be updated.
Pat

Can I change two devices of my Id and assign new id's and still access the same cloud.

After ISO8 my sons iPad rings when I receive a call. I have two 5c's and an iPad under one apple id. Can I assign a new id to my wife's phone and my son's iPad and then all of use the same cloud under the new update? Will my wife lose her contacts? Im thinking what I need to do is start both devices from scratch and assign new id's with different emails and then add them to family sharing. Am I correct here, I just want to verify before attempting so I do not lose anything or create unnecessary backlash in my direction. Thank you for any assistance

If your goal is to stop your son's iPad from ringing when you receive a call, all you need to do is go to Settings>FaceTime on his iPad and turn "iPhone Cellular Calls" off.

Creating number ranges in PRD

Good afternoon,
I understand it is advisable to create number ranges in each client. When using SNRO in PRD we have to open the client via SE06 and SCC4. We do not like having to open PRD client. Is it possible to create number ranges in PRD without having to open client?
Regards,
Steve

Hi,
Every team will have firefighter ID for such purposes. Before logging to the user ID, you will be asked to maintain the reason for login. So, all the changes made through firefighter ID is tracked. So, check with your basis team to provide access for maintaining number ranges under this ID.
Regards,
P Gomatheeswaran

Invoicing billing number range and Accounting billing no range

Hi
Want to know the Link between the Invoicing billing number range and Accounting billing no range
Link between the two no ranges if any
Rohit

Hello,
There is no link between the Accounting document and the Billing document
Billing documents number range were maintained in VN01 and the Accounting document number range were maintained i n FBN1 for each financial year against the company code
If you want the same Number to be generated for both , then
Use T. code VOFA and check billing document type and itu2019s assignment for Accounting document type for example for billing document type accounting document type is RV and check the number range for billing document type through T. code VN01 and then use T. code OBA7 to see number range object for accounting document and then finally use T. code FBN1 and maintain same number range as per billing document type and mark as external number range then system will generate same accounting document number against billing document after releasing the billing document to accounting
Thanks,
santosh

How to create Number Range

Hi All Sap Experts
Please tell me How to create Number Range
I tried with the Transaction Code " SNRO "
But Im getting The following error
Dialog box title : " Buffering Methods ".
Message in the Dialog box is :
 -Numbers may be lost!
 -Do not use for Financial accounting Documents!!
?. Do you want set this Buffering method?
And another error is :
Dialog box title : " Transport number range intervals "
Message in the Dialog box is :
 The number range intervals are not included in automatic customizing changes.
 Transport all changes made within range interval maintenance must be
 triggered manually.
 In the initial screen for range interval maintenance function
 Interval --> Transport
 Please note the information that you get when transporting intervals.
So please tell me the solution for this error.
Thank you
Basu
Another is

hi,
Create number range object using OYSN.
Then call the following function modules.
FORM get_next_id CHANGING p_discrep.
DATA: last_id LIKE zrecaudit-discrep,
 quant LIKE inri-quantity, "dummy
 code LIKE inri-returncode. "returncode
CALL FUNCTION 'NUMBER_RANGE_ENQUEUE'
 EXPORTING
 object = 'ZRECAUDIT'
 EXCEPTIONS
 foreign_lock = 1
 object_not_found = 2
 system_failure = 3
 OTHERS = 4.
IF sy-subrc = 0.
 CALL FUNCTION 'NUMBER_GET_NEXT'
 EXPORTING
 nr_range_nr = '01'
 object = 'ZRECAUDIT'
 IMPORTING
 number = last_id
 quantity = quant
 returncode = code
 EXCEPTIONS
 interval_not_found = 1
 number_range_not_intern = 2
 object_not_found = 3
 quantity_is_0 = 4
 quantity_is_not_1 = 5
 interval_overflow = 6
 buffer_overflow = 7
 OTHERS = 8.
 CALL FUNCTION 'NUMBER_RANGE_DEQUEUE'
 EXPORTING
 object = 'ZRECAUDIT'
 EXCEPTIONS
 object_not_found = 1
 OTHERS = 2.
ENDIF.
ENDFORM. " get_next_id
refer the links
http://www.sap-img.com/ge003.htm
http://www.sap-basis-abap.com/sapmm009.htm
http://www.erpgenie.com/abap/code/abap33.htm
http://www.kabai.com/abaps/z26.htm
Rgds
Anversha

Remove PR Mandatory for PO and Assign new PO Layout to one User

Hi Experts,
I want to remove PR mandatory for PO and assign new PO Layout for one User. I am facing following problem.
1. I have already created a function authorisation Z1 with reference to PR and assign the same in SU01, Paramenter EFB - Z1.
Now I have removed ref to purchase requisition tick and assign new PO layout in Z1.
But ref to PR not removed, and new po layout is not coming.
What should I do.
Thanks in advance.
GR

why dont u assign the new PO screen layout to the PO document type thru spro-mmpurchasingpo-define document type---here assign ur new field selection with the PO document type coz whatever the screen layout of PO comes while processing me21n,it comes due to the field selection present here as per my knowledge.
regards,
indranil

MM06E003 Number range and document number

hi
Is the functionality of MM06E003 Number range and document number( user exit ) is same in ECC 6.0 and ECC 5.0
Regards,
vijay

Hello,
Yes, it is one and the same thing.
Thanks!

Create handling units and assigning them as Packing Proposal for Sales Orde

Hi Friends
How to create handling units and assigning them as Packing Proposal for Sales Order Items in the background.
Could you please help to provide Input Parameters for BAPI_HU_CREATE for sales order OR is there any other program creating and assigning them to Sales Order line Items.
Thanks in Advance.
SR

Hi Friends
I created Handling Units with BAPI_HU_CREATE , Pack materials with BAPI_HU_PACK in to Handling Untis and assign handling units to sales order with BAPI_HU_CHANGE_HEADER . But These BAPIs are not doing packing sales order line items in to handling units . I have to go sales order and do sales order line item packing by clicking packing button.
Could you please help on how to do packing Sales Order Line items in the background with BAPIs.
Thanks in Advance.
SR

Create number range and assign new product id

Similar Messages

Maybe you are looking for