Create OM infotype : very hard...
Hi,
i would like to create a <b>OM infotype</b> not PA.
i recovered some documents on this site, but when i follow the procedure, it don't work.
Can you explain to me the full procedure please ? step-by-step.
Thanks so much.
I'm on SAP ECC 6.0.
hi,
Steps to create a HR Infotype:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the 'Employee Infotype' radio button.
4) Select the 'PS Structure Infotype'.
5) Click on Create... A separate table maintenance window appears...
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on 'All' push button. It takes a few moments.
10) Click on 'Technical Characteristics'. Infotype list screen appears
11) Click on 'Change'(pencil) button
12) Select your Infotype and click on 'Detail' (magnifying glass) button
13) Give 'T591A' as subtype table
14) Give 'T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on 'Infotype Characteristics' ... Infotype list screen appears
18) Click on 'Change' (pencil) button
19) Click on 'New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement...
25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select 'Layout Editor' and click 'Change'.
27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Don't forget to 'Activate at every level)
Subtype Creation :
Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
Subty.text tab is T591S and time const tab is T591A.
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
HR related site:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Go thru following thread
INFOTYPE for P.A. and O.M.
Step by step guide on creating OM Infotype:
http://www.sappro.com/downloads/jan07/OMinfotypes.pdf
Have a look at the below links
http://www.sapdevelopment.co.uk/hr/hr_infotypes2.htm
Re: Infotype
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP_PD.pdf
Reward points if found helpful
..
Cheers,
Chandra Sekhar.
Similar Messages
-
i have some some main problems with this phone . the browser is not good . i want opera or uc browser in store . i not able to copy or paste any text msgs ,this is a problem. i have seen that when i try to update my phone , it showing error . i seen something is there that is too gud in this phone . i requisted firefox to increase its problem solving and make good and user friendly os like android . there are many things which i like very much on this phone but , on the same side there are lots of backlogs are there .
such as :
1)no whats app (connect a2 app is there but i didnot like it .bec its very slow n giving me too much problem)
2)keyboard is very hard to type because its width is low ,so i cant able to type gud . atleast chage it in u r next update.
3)the browser is not good . giving many problem in downloading and looses its data after i close it . its forfotting my data like passwords every time.
4) file manager is too slow .( taking much time for loading ).Hi rajkumarukkuturi,
Thank you for your feedback, however all of the feedback for the developers can be submitted at input.mozilla.org.
If you need any support, please consider creating a new thread containing the specific details of your issue.
Doing so will allow the Mozilla volunteers to give you solutions that are more helpful to you. This may help them to solve your problem faster and more efficiently.
Please, feel free to post the link to your thread on this thread for volunteers interested in assisting you.
Thank you. -
Hi SAP Guru,
Greetings for the day,
I had hired a guy with the infotype of 0207,0208,0209,0210 after hiring i try to transfer him using TRANSFER ACTION to another location say from New York to California, which is entirely a different state, where unable to create the 0208,0209,0210 in that i can able to create 0207 infotype alone, when i tried to create after 0207 creation, it is not accepting the information, Here i am looking for some one help, where some one can throw a torch for this issue.
I had checked with dynamic action, which shows correctly.
Pls help me in this regards, this is very urgent.
Thanks in advance for your reply.
Regards,
Babu.Generally, an Infotype 208 is not required. Therefore, you would
not get an error in RPCACLU0 if an employee does not have one assigned
Without an IT0208 record, the system uses the tax authority
specified on IT0207. Additionally, the same applies to IT0209; one is
not required and the system will use that of either IT0207 or IT0208.
Best regards,
Márcio Leoni -
Problem Regarding Creating OM Infotype
Hi Experts
Very good morning ,,,,, n happy new year....
i would like to create one OM infotype .i have found some
threats in forum unable to get result. initially i have created
HRI9*** structure in Se11 then in PPCJ tried to create new
infotype but there is log for not creation of infotype and
that process stops right there only.kindly give me the
systematic step for the same.
Thanks
NishitaHi experts....
There is no authorisation issue as such...i have just created HRI**** structure in SE11 and
then finally went to the PPCJ for creating it showing following errors.
Table HRP9012 does not exist
HRP9012 not created in the database
Database index XXXX not created
Module pool MP901200 does not exist
Include MP901220 does not exist
Include MP9012BI does not exist
Screen 1000 does not exist
Screen 2000 does not exist
Screen 3000 does not exist
User interface for MP901200 does not exist
T778T: no table entries exist
T777T: no table entries exist
T777D: no table entries exist
T77ID: no table entries exist
T777I: no table entries exist
T777Z: no table entries exist
T77OA: no table entries exist
T777M: no table entries exist
T778U: no table entries exist
T777U: no table entries exist
T77NI: no table entries exist
OBJECT PDST: no table entries exist
OBJECT PDWS: no table entries exist
Dialog module RH_INFOTYP_9012 does not exist
R3TR TABL HRP9012 does not exist
R3TR PROG MP9012BI does not exist
R3TR DIAL RH_INFOTYP_9012 does not exist
kindly know me the systematic procesure to create OM Infotype. -
About to use HR_INFOTYPE_OPERATION to create customer infotype issue:
hi
i want to create infotype use function(HR_INFOTYPE_OPERATION).
this infotype is customer infotype.
the first scenario is:
i'm be sure no data about one employee in this infotype(9004).
to call with data upload function and put data into internal table IT_PA9004.
and the table data as follow:
one line: it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
it_pa9004-zzvalue = 50 (customer field).
two line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
it_pa9004-zzvalue = 60 (customer field).
three line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
it_pa9004-zzvalue = 70 (customer field).
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
it_pa9004-zzvalue = 80 (customer field).
i run the programme and get information is:
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
but i use the transation PA30 to view all data:
in database just exist one row:
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
it_pa9004-zzvalue = 80 (customer field).
the second scenario is:
in database the infotype have exist one row:
pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
pa9004-begda = '20080318' , pa9004-endda = '20080318'
pa9004-zzvalue = X (customer field).
and i create another row:
line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
it_pa9004-begda = '20080318' , it_pa9004-endda = '99991231'
it_pa9004-zzvalue = 80 (customer field)
i run the programme and get information is:
11022887 insert ok.
the three scenario is:
set HR_INFOTYPE_OPERATION of import parameter operation = 'MOD'
in any scenario will get error :not exist subtype .
what heppend about HR_INFOTYPE_OPERATION working,i had to use this function to
create other infotype of SAP owner.
and will create successfully.
so i thank it may be config Constraints about customer infotype.
is time Constraints effect?
so i want to how to check it?
and if i want to create one infotype for customer using PM01 what some thing
must be taken into account.
think you advance.
partial source code as follow:
FORM ACTION_INSERT .
DATA: P_FLAG TYPE C.
DATA: WA_LOG LIKE LINE OF DATA_LOG.
DATA: PP_ACTION TYPE PSPAR-ACTIO.
LOOP AT IT_PA9004.
CLEAR P_FLAG.
CALL FUNCTION 'HR_PSBUFFER_INITIALIZE'.
PERFORM lock_employee USING IT_PA9004-pernr CHANGING P_FLAG.
PP_ACTION = IT_PA9004-ACTION.
PERFORM HR_INFOTYPE_OPERATION USING IT_PA9004 PP_ACTION CHANGING P_FLAG.
IF P_FLAG IS INITIAL.
if test_run = space.
COMMIT WORK.
else.
ROLLBACK WORK.
endif.
write:/ it_pa9004-pernr,'insert ok'.
ELSE.
ROLLBACK WORK.
write:/ it_pa9004-pernr,'error'.
ENDIF.
PERFORM unlock_employee USING IT_PA9004-pernr .
ENDLOOP.
ENDFORM. " ACTION_INSERT
FORM LOCK_EMPLOYEE USING P_PERNR
CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
CLEAR P_RETURN.
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
EXPORTING
number = P_PERNR
IMPORTING
return = P_RETURN
EXCEPTIONS
OTHERS = 01.
CALL FUNCTION 'HR_INITIALIZE_BUFFER'
EXPORTING
pernr = P_PERNR.
IF P_RETURN IS NOT INITIAL.
PP_FLAG = '1'.
ENDIF.
ENDFORM. " LOCK_EMPLOYEE
FORM HR_INFOTYPE_OPERATION USING P_PA9004 LIKE IT_PA9004
P_ACTION type PSPAR-ACTIO
CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
DATA: bapipakey type bapipakey,
P_SUBTY TYPE P9004-SUBTY,
PP_9004 TYPE TABLE OF P9004 WITH HEADER LINE.
CLEAR P_RETURN.
REFRESH PP_9004.
MOVE-CORRESPONDING P_PA9004 TO PP_9004.
IF P_ACTION = 'INS'.
PP_9004-AEDTM = SY-DATUM.
PP_9004-UNAME = SY-UNAME.
ENDIF.
IF P_ACTION = 'MOD'.
PP_9004-AEDTM = SY-DATUM.
PP_9004-UNAME = SY-UNAME.
ENDIF.
APPEND PP_9004.
P_SUBTY = P_LGART.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
infty = '9004'
subtype = 'FQ03'
subtype = P_SUBTY
number = PP_9004-pernr
validityend = PP_9004-ENDDA
validitybegin = PP_9004-begda
RECORDNUMBER = pp_9004-seqnr
record = PP_9004
operation = 'INS'
operation = P_ACTION
nocommit = 'X'
IMPORTING
return = P_RETURN
key = bapipakey
EXCEPTIONS
OTHERS = 0.
IF P_RETURN IS NOT INITIAL.
PP_FLAG = '9'.
ENDIF.
ENDFORM. " HR_INFOTYPE_OPERATION
FORM UNLOCK_EMPLOYEE USING P_PERNR.
CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
EXPORTING
number = p_pernr
IMPORTING
return = P_RETURN
EXCEPTIONS
OTHERS = 01.
ENDFORM. " UNLOCK_EMPLOYEEhi
i want to create infotype use function(HR_INFOTYPE_OPERATION).
this infotype is customer infotype.
the first scenario is:
i'm be sure no data about one employee in this infotype(9004).
to call with data upload function and put data into internal table IT_PA9004.
and the table data as follow:
one line: it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
it_pa9004-zzvalue = 50 (customer field).
two line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
it_pa9004-zzvalue = 60 (customer field).
three line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
it_pa9004-zzvalue = 70 (customer field).
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
it_pa9004-zzvalue = 80 (customer field).
i run the programme and get information is:
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
but i use the transation PA30 to view all data:
in database just exist one row:
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
it_pa9004-zzvalue = 80 (customer field).
the second scenario is:
in database the infotype have exist one row:
pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
pa9004-begda = '20080318' , pa9004-endda = '20080318'
pa9004-zzvalue = X (customer field).
and i create another row:
line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
it_pa9004-begda = '20080318' , it_pa9004-endda = '99991231'
it_pa9004-zzvalue = 80 (customer field)
i run the programme and get information is:
11022887 insert ok.
but in database just exist the first data
pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
pa9004-begda = '20080318' , pa9004-endda = '20080318'
pa9004-zzvalue = X (customer field).
the three scenario is:
set HR_INFOTYPE_OPERATION of import parameter operation = 'MOD'
in any scenario will get error :not exist subtype .
what heppend about HR_INFOTYPE_OPERATION working,i had to use this function to
create other infotype of SAP owner.
and will create successfully.
so i thank it may be config Constraints about customer infotype.
is time Constraints effect?
so i want to how to check it?
and if i want to create one infotype for customer using PM01 what some thing
must be taken into account.
think you advance.
partial source code as follow:
FORM ACTION_INSERT .
DATA: P_FLAG TYPE C.
DATA: WA_LOG LIKE LINE OF DATA_LOG.
DATA: PP_ACTION TYPE PSPAR-ACTIO.
LOOP AT IT_PA9004.
CLEAR P_FLAG.
CALL FUNCTION 'HR_PSBUFFER_INITIALIZE'.
PERFORM lock_employee USING IT_PA9004-pernr CHANGING P_FLAG.
PP_ACTION = IT_PA9004-ACTION.
PERFORM HR_INFOTYPE_OPERATION USING IT_PA9004 PP_ACTION CHANGING P_FLAG.
IF P_FLAG IS INITIAL.
if test_run = space.
COMMIT WORK.
else.
ROLLBACK WORK.
endif.
write:/ it_pa9004-pernr,'insert ok'.
ELSE.
ROLLBACK WORK.
write:/ it_pa9004-pernr,'error'.
ENDIF.
PERFORM unlock_employee USING IT_PA9004-pernr .
ENDLOOP.
ENDFORM. " ACTION_INSERT
FORM LOCK_EMPLOYEE USING P_PERNR
CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
CLEAR P_RETURN.
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
EXPORTING
number = P_PERNR
IMPORTING
return = P_RETURN
EXCEPTIONS
OTHERS = 01.
CALL FUNCTION 'HR_INITIALIZE_BUFFER'
EXPORTING
pernr = P_PERNR.
IF P_RETURN IS NOT INITIAL.
PP_FLAG = '1'.
ENDIF.
ENDFORM. " LOCK_EMPLOYEE
FORM HR_INFOTYPE_OPERATION USING P_PA9004 LIKE IT_PA9004
P_ACTION type PSPAR-ACTIO
CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
DATA: bapipakey type bapipakey,
P_SUBTY TYPE P9004-SUBTY,
PP_9004 TYPE TABLE OF P9004 WITH HEADER LINE.
CLEAR P_RETURN.
REFRESH PP_9004.
MOVE-CORRESPONDING P_PA9004 TO PP_9004.
IF P_ACTION = 'INS'.
PP_9004-AEDTM = SY-DATUM.
PP_9004-UNAME = SY-UNAME.
ENDIF.
IF P_ACTION = 'MOD'.
PP_9004-AEDTM = SY-DATUM.
PP_9004-UNAME = SY-UNAME.
ENDIF.
APPEND PP_9004.
P_SUBTY = P_LGART.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
infty = '9004'
subtype = 'FQ03'
subtype = P_SUBTY
number = PP_9004-pernr
validityend = PP_9004-ENDDA
validitybegin = PP_9004-begda
RECORDNUMBER = pp_9004-seqnr
record = PP_9004
operation = 'INS'
operation = P_ACTION
nocommit = 'X'
IMPORTING
return = P_RETURN
key = bapipakey
EXCEPTIONS
OTHERS = 0.
IF P_RETURN IS NOT INITIAL.
PP_FLAG = '9'.
ENDIF.
ENDFORM. " HR_INFOTYPE_OPERATION
FORM UNLOCK_EMPLOYEE USING P_PERNR.
CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
EXPORTING
number = p_pernr
IMPORTING
return = P_RETURN
EXCEPTIONS
OTHERS = 01.
ENDFORM. " UNLOCK_EMPLOYEE -
How to create posting period veriant
Hi Gurus,
I Want to create posting period veriant for update periods ,
Say per exmple : in UAT phase project ... need to update posting periods with diffrent dates .. meaning of that we need see all periods like monthly jobs ,yearly jobs also ...
see below exmple i got .. as a functonal consultat can i do ?
Allowed OB52 based on company code
If you have several company codes and want your users only to be able to open and close periods
(transaction OB52) belonging to their posting period variant (=company code).
First you configure the Posting Variant :-
1) FI- FI Global Settings - Document - Posting Periods - Define Variants for Posting Periods
2) FI- FI Global Settings - Document - Posting Periods - Assign Variants to Company Code
Second Step:-
Goto SE11 copy the view V_T001B to ZV_T001B_000X (000X indicate the Posting Variant)
In Change mode, tabstrips Selection Conditions Insert line 2 with
Table Field Name Operator Comparative Value AND/OR
T001B BUKRS EQ '000X' AND
Save your entries
Third Step :-
Goto SE54, Options Generated Objects -> Create
Authorizations Group FC31
Function Group Z00F0
Maintenance Type One Type
Overview Screen 65
Single Screen 0
Final Step :-
Goto SE93, Create a new transaction code ZOB52_000X
Start object - Transaction with parameters (parameter transaction)
Transaction SM30, Tick Skip initial screen
Name of screen field Value
VIEWNAME ZV_T001B_000X
UPDATE X
Save your entries.
Now, test your new transaction code ZOB52_000X which will only display the
Posting Variant that you have define in your table view.
Regards,
purnaThe variant for posting periods is defined for every company code. The name of this variant is identical to the company code name. Every company code is allocated to this variant with the same name.
Path: IMG > Financial Accounting > Financial Accounting Global settings > Document > Posting Periods > Define Variants for Open Posting Periods.
Path: IMG > Financial Accounting (New) > Financial Accounting Global settings(New) > Ledger > Fiscal year and Posting Periods > Posting Periods > Define Variants for Open Posting Periods.
Transaction Code: "OBBO" -
How to create custom infotype for training and event management
hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzalHi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini -
Creating a Master virtual hard disk and using the same for all other VM's
Hi,
We would like to create a master virtual hard disk and use the same for all other VM's. Can we do that ?
my requirements :
1) create 10 VM's
2) first create a master virtual hard disk with win OS and use the same to create the 10 VM's.
3) After creating the VM's change the HDD size.
-- if i have created master virtual disk with 500GB , and use the same for creating a virtual machine. can we change the HDD size to 1TB ?
After creating the VM's ,i will change the system names and activate the windows accordingly.
Will there be any implications ,if we can/will do like this.
Thanks.Hi Suren424,
I think Using Differencing Disks may cover your needs .
Please refer to following setps:
"Create the Parent Virtual Machine Configuration and Virtual Hard Disk
Install the Operating System, updates, and common software
Generalize the installation
Prepare the parent virtual hard disk
Create the differencing disks
Create virtual machines that use the differencing disks
For details please refer to follwing link:
http://social.technet.microsoft.com/wiki/contents/articles/1393.hyper-v-virtual-machine-vm-parent-child-configuration-using-differencing-disks.aspx
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How to create an infotype in sap ecc6.0 ?
Hi all,
I know i how to create an infotype in sap 4.7, but i am facing the problem while
creating an infotype in sap ecc6.0 version. could u plz provide me the info with screen shots how to create an infotype and how to enhace that infotype ?
Waiting for u r response.
Regards,
RaviHi ,
To create OM infotype:
1. Go to SE11 and create a structure HRI9XXX (9XXX --> name of the infotype). Add the required fields to this structure and save and activate. then come out of it.
2. Go to PPCI and enter Infotype number (9XXX) and description.
3. Click create.
4. In the infotype category select details for the infotype.
5. Click create button. It should create the infotype.
6. Click on Check. A window with menu will open.
7. In that window navigate to Table Entries.
8. Under table Entries, select T777I and click on change.
9. It opens SM30. Click on Maintain.
10. Select the infotype and add information for "Time Constraint" and "Infotype Per Object Type".
11. Save.
12. Go back to check menu, see if all entries exist. Do not worry last 5 table entries. And you are done -
Error while creating pd infotype
Hi friends,
I am creating PD infotype which is having same structure as 1002.here i copied module pool program of 1002 to my infotype and there i made changes to fields.when i am running it in pp02 transaction it is giving runtime error create_data_unknown_type.this exception is coming from module 'initialize_dyn_tab' which is in the PAI of screen no 2000.will any one pls help on this issue.
Thanks,
kumar.Hi Chandra,
Actually, you don't need to. System should create it.
If you have problems though, you can refer to the article below which expains a more detailed solution of creating a PD infotype:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c03ec8d4-71c9-2d10-e1b9-b3142180f094
Regards,
Dilek -
Hard drive is running very hard and warm
I recently had a hard drive issue with my mac book pro and basically had to erase everything and then restore all my files from Carbonite. I have now restored all of my files and I think Carbonite is now rebacking those up, but in the mean time my hard drive is running very hard and causing my lap top to get very warm. Is this normal? Is it because of the back up/restore? Or is there something wrong with my fan or hard drive?
Install iStat pro (from the Internet) and open it. It will show you the internal temperatures of your MBP and the fan speeds. Also open Activity Monitor to compare the internal CPU activity with the iStat pro data. Post both for an evaluation.
Since you have suspicions regarding your HDD, make certain that you do have backups. You might open Disk Utility>First Aid and 'Verify Disk'.
Ciao. -
How to create an infotype with one of its field length eq 1000.??
hi ,
i need to create a infotype where one of the field length is 1000 characters how do i achieve this. if i give more than 255 in the PS structure it will not allow. then how do i get a text field of 1000 chars in the screen ( which is an input field)You can use those function calls even inside a PA Infotype.. they just invoke the text ediotr table control.. I gave you the reference of the PD infotype 1002 just for an idea. I don't think you will able to meet your 1000 char reqt without using the text editor.
~Suresh -
I designed an interactive script using Captivate 7. It works like a branching scenario, and is currently in use by about 350 phone operators, soon to be over 750. Everybody is pretty happy about it, but I am getting complaints - especially form the older people - that the slider in the TOC is very hard to see, and I agree - as you scroll down the TOC entries, the slider becomes lighter and lighter in color. Is there any way to tweak it so that I can increase contrast, or recolor it in a darker tone? I know this was discussed a couple of years ago, but I don't know if the issue was addressed by Adobe, or if anyone has come up with a solution.
I designed an interactive script using Captivate 7. It works like a branching scenario, and is currently in use by about 350 phone operators, soon to be over 750. Everybody is pretty happy about it, but I am getting complaints - especially form the older people - that the slider in the TOC is very hard to see, and I agree - as you scroll down the TOC entries, the slider becomes lighter and lighter in color. Is there any way to tweak it so that I can increase contrast, or recolor it in a darker tone? I know this was discussed a couple of years ago, but I don't know if the issue was addressed by Adobe, or if anyone has come up with a solution.
-
Create PD Infotype link to Object USER
Dear Experts,
I have created a custom PD Infotype P9032, under Object "User'. But when i go to Expert Mode to create the infotype record, it screen brings me to "Su01" screen ie. create SAP user instead.
If i change the Object to "Organizational Unit" and create the infotype record, it shows me the correct custom infotype screen.
How do i link my custom PD infotype to Object User? ... i have done the necessary updating of table T777I.
Thanks so much,
ZulHi Dusan,
perhaps the following steps will help you.
1. calls se11
2. mark radiobutton in front of Data type
3. fill data type with HRI9003
4. goto menu [Utilities] and select [Environment Analysis]
This will display all objects i hope also the 3 missed. From there
you could mark it and delete it.
Hope this helps.
Regards
Bernd -
I have a MacBook Air...I am having a very hard time loading some websites
I am having a very hard time with some websites opening on my computer, but when I try to open them on my daughters computer(not an apple) it opens immediately
Go step by step and test.
1. Power cycle
Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
It will take a while.
Restart the computer.
Start up in Safe Mode
http://support.apple.com/kb/PH11212
2 Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
2. Quit Safari if open.
Option click the "Go" menu in the Finder menu bar.
Select "Library" and then "Caches".
Look for the folder 'com.apple.Safari"
Right click "com.apple.Safari" and select "Move to Trash"
Relaunch Safari.
3. Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Click "Reset".
4. Safari > Preferences > Privacy > Cookies and all other website data:
Press “Remove All Website Data” button
5. Turn off Extensions if any, and launch Safari.
Safari > Preferences > Extensions
Maybe you are looking for
-
Item/Drill Report Performance hinderance
I am having a problem with report performance. I have a report that I have to have 5 drop down menus on top of the report. It seems the more drop down menus I add, the slower the response time when the report is actually navigated. One of the drop do
-
How to send a project containing multiple pictures by e-mail?
I have previously used Photoshop Album 2.0 on PC, and have just purchased an iMac and the PSE 6.0 for it. I have a leisure-time project at hand, where I would like to send some 30 pictures for review for some people. With Photoshop Album, I could in
-
Connecting to Pioneer Elite VSX-23TXH
I am actually reading Pioneer's instructions before installing the receiver replacing a Yamaha! I am a bit uncertain about which ports to use on receiver to utilize the best video (HDMI) and audio (optical) connections. Would appreciate any tips. I b
-
Rmi interface not loading when invoked from class in package
Hi, It would be a great help if you could help me out with the following problem: The RMIClient fails to detect the remote object interface in the current directory when i place it within a package. 1) I tried placing the remote object interface in t
-
Snow Leopard on the New Machine
I'll may buy a new MacMini (2014) and I'm asking myself if I could install SnowLeopard on it and if there gonna be any issu (professional software compatible with snowleopard only). Does anybody tried it or Know the answer. Thanks by advance for all