Create page that contains buttons

I need to create page that contains many buttons each one is used for opening a specific page.
Can anybody help me to give the steps?

Hi,
I think you need help for HTML DB.
- Go and create page (could be HTML)
- Then add region (form region)
- Create buttons. Every button has ability to redirect to Page in this Application or URL. Just choose any page in the application.
- On each step you can hit help to learn details.
- There is a function “Create Multiple Buttons”
Konstantin
[email protected]

Similar Messages

What should I do when a receive a popup prompting I'm about ro view an encrypted page that contains some unencrypted informationshould click on the ok button.

I am about to view an encrypted page that contains some unencrypted information and there is an Ok button should I click on the Ok button.

Have you tried the following?
I'm assuming there is nothing written on the second page.
Scroll down to the second page and write something.
Highlight everything on that page Usually this will show in blue including the invisibles.
Make sure you attempt to highlight everything by selecting the whole page.
Press Backspace/delete until all of that page is clear.
Continue until your cursor lands on your first page.
By then the offending second blank page should have gone.
I tried this procedure a few minutes ago and it worked. (Pages 5.5.2)
Regards,
Tallberg

To display an html page that contains frames, using servelt

Hi all
i am using a servlet which has to display a html page that contains frames.
I would like to know whether it is possible to display a frame using servlets.
If yes please tell me the how to do it?
Thanks,
Sudheer.

Thanks Seth.
I just tried that, but when I run it in preview mode (by simply hitting F12), it gives me an error because it can't find the file in the temporary preview folder it creates (ie:
C:\Users\Tom\AppData\Local\Temp\CP2840464090993Session\CPTrustFolder2840464091009\Captivat ePreviewLoader\
I'm hoping to find a place to put it so that it works when running F12 and when running in regular 'published' mode
I was thinking I could put it in the 'C:\Program Files\Adobe\Adobe Captivate 6 (32 Bit)\Templates\Publish' folder, but when I do that, it doesn't seem to gete copied to the .\CaptivatePreviewLoader folder when running F12

Where in FireFox 4.0.1 do I have the option I am about to view an encrypted page that contains some unencrypted information to uncheck?

In the previous version of Firefox there was an option under Security > Warning Messages to either check on or off the following statement "I am about to view an encrypted page that contains some unencrypted information" Can you tell me where in FF 4.0.1 this option has been moved to or what has replaced this question?

I don't know whether there is a button in the dialogs, but you can change your settings using the about:config preference editor.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''security.warn''' and pause while the list is filtered
(3) Bold items have been customized, and non-bold items are the default settings. I think the one you are looking for is '''security.warn_viewing_mixed'''.
If you change the value and test on a real web page, does it do what you want?

I need to set the position of components on a page that contains a MenuBar,

I need to set the position of components on a page that contains a MenuBar, but MenuBar does not provide a getPreferred size method.
How can I get the MenuBar's size in AWT?
Thanks.

A menubar is not a general component that is added to a frame like any another. It is the specific responsibility of the setMenuBar/setJMenuBar methods to deal with this.

When I try to do financial transactions I get a warning message "You have requested an encrypted page that contains some unencrypted information. Information that you see or enter on this page could easily be read by a third party." How much do I need to

When I try to process financial information such as log onto my banking account or my paypal account, or pay for something online I get a warning message "You have requested an encrypted page that contains some unencrypted information. Information that you see or enter on this page could easily be read by a third party." I also never get a padlock to show that I am on a secure site. How much do I need to worry or what should I do?
== URL of affected sites ==
http://

I would not trust that on a banking site. If it were just a forum, no problem, but anything unencrypted during banking is suspicious.

Problem in downloading an html page that contains images

Hi,
This is surekha
I am facing a problem in downloading an html page that contains images
The file is downloading , but when I access the the downloaded file it displays X marks in the place where images r present....
How can i download a html file along the images it contains
Please help me ...........

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. 
http://forums.mozillazine.org/viewforum.php?f=25 
You'll need to register and login to be able to post in that forum.

You have requested an encrypted page that contains some unencrypted information.this is safe or not

During net banking site access this message appear You have requested an encrypted page that contains some unencrypted information. Information that you see or enter on this page could easily be read by a third party.

I would not trust that on a banking site. If it were just a forum, no problem, but anything unencrypted during banking is suspicious.

I get this message when I try to sign in -..you have requested an encrypted page that contains some unencrypted information.

I am using Firfox and when I sign in I get the ......message when I try to sign in …..you have requested an encrypted page that contains some unencrypted information...........

I would not trust that on a banking site. If it were just a forum, no problem, but anything unencrypted during banking is suspicious.

Can I create pages that only authorized users can access?

I need to create pages that only authorized users can access, is that possible to be done with Muse?

Hi Natalia,
If you are using Business Catalyst as a host , then "Yes" you need to publish a website to use Secure zone of Business Catalyst.
If you are using a different host or BC then you may use third party widgets like
Adobe Muse Password Protection Widget | MuseThemes.com
Thanks
Prabhakar Kumar

No https or gold lock, and error "you have requested and unencrypted page that contains some unencrypted informateion. Information that you see or enter on this page could easily be read by a third party

Just want the security to appear back in application

That message means that a page that is opened via a secure https protocol link has elements that come via an insecure http connection. 
That is a problem with that website and not with Firefox.
Previous Firefox version used to have settings in Tools > Options > Security : Warning Messages to enable or disable such warning messages easily.
[] "I'm about to view an encrypted page that contains some unencrypted information"
Firefox 5 doesn't have that warning section anymore and if necessary you need to change the corresponding pref(s) directly on the about:config page. 
You can open about: pages via the location bar like you open a website.

Browsing to pages that contains Flash

When browsing to pages that contains anything made with Macromedia Flash or Shockwave, it promps me to download flashplayer to view this page. Is it possible to download Flashplayer to iPhone?

Unfortuantely not. Currently the Iphone and Ipod touch do not support Flash. You can leave feedback for apple here and let them know what you would like to see on the Iphone: http://www.apple.com/feedback/iphone.html

How can I use iWeb to create website that contains a lot of downloadable audio files?

Hi
How to use iWeb to create a website that contains a downloadable audio files. I'm uloading about 15 GB of audio files. I need to creat folders "albums" and then put the files in these folders. Any advise?
Thank you very much for your time to this
W B

The important thing is not to put the audio files directly into iWeb: if you do that then every time iWeb decides it needs to upload the entire site you will find yourself uploading all 15GB of audio files, which won't make you happy. Start by uploading the files to the server - in folders as suits you - and then link to them in iWeb.
If you want them to download rather than play, you may be able to set up an .'htaccess' file in the folder which will force a download - it depends on whether your hosting service will allow this. The method is described here:
http://www.wilmut.webspace.virginmedia.com/notes/missing/download.html
Here is an example of a simple link which produces a download (without the process described the audio file would play in the browser in a blank page):
http://rfwilmut.net/stars/dawson2.mp3
Then all you need to do is to provide a link, designed however suits you, in your iWeb page. If your server won't allow the .htaccess file then you will have to ask visitors to control-click (Mac) or right-click (Windows) on the link and choose 'Download linked file' or equivalent - not so convenient; or otherwise zip the files first, which won't much reduce their size but will force a download (and of course the recipients will have to unzip them).
If you want the files to play in a player in the page, you can use an html snippet to provide a player as described in this page (you will also need to upload a script to the webspace - this is provided in the page):
http://www.wilmut.webspace.virginmedia.com/notes/qtembed.html

Create Page that programmatically displays an iview

I'm trying to design a page that will contain to iViews. One would have an announcement text at the top of the page and the other would be a related iView. I would like the announcement header to only display if there's content to be loaded. I've thought of two methods of this.
One would be to create a JSPDyn page that loads both iviews and partner that with some Javascript that hides the top if there's no relevant content. However, I can't seem to find any examples of JSPDyn pages loading other iViews. Where would I look for examples on this?
The other method would be using a property of the iView API called
pageSupport.ivuRemove that appears to do what I want, but again, I haven't found any example code on how to use this.
If anyone has any ideas, example code, or even a better method for optionally displaying an iView, please let me know. I'll be sure to award points for answers that lead me on the right track.
Thank you.
- Craig

Hi Praveen,
My requirement is somewhat similar. I have a JSPDynpage application which gets data from the KM.
If no data is available the iView should be hidden. The iView should be visible again only when there is relevant data available in the KM for the iView.
I tried using the above code that you provided. However i am not able to figure out why the doOnNodeReady() is not getting called.
Here is an example code that i am trying to get it work :
package com.test;
import com.sapportals.portal.prt.component.AbstractPortalComponent;
import com.sapportals.portal.prt.component.IPortalComponentProfile;
import com.sapportals.portal.prt.component.IPortalComponentRequest;
import com.sapportals.portal.prt.component.IPortalComponentResponse;
import com.sapportals.portal.prt.pom.IEvent;
import com.sapportals.portal.prt.pom.NodeMode;
public class JSPPortalComp extends AbstractPortalComponent
    String text = null;
    public void doContent(IPortalComponentRequest request, IPortalComponentResponse response)
          IPortalComponentProfile profile = request.getComponentContext().getProfile();
          text = profile.getProperty("TextValue");
          response.write("Hello" + text);
     protected void doOnNodeReady(IPortalComponentRequest request, IEvent event){
       if(text != "X") {
               request.getNode().setNodeMode(NodeMode.DEFAULT_MODE);
          } else {
               request.getNode().setNodeMode(new NodeMode("HideMode"));
               return;
If i set the TextValue iView property value to X then the iView should be hidden else shown.
If i place a response .write() statement in the doOnNodeReady(), the response doesn't print.
Can you please provide some insights into this.
I have posted a thread for the same kind of requirement : https://forums.sdn.sap.com/thread.jspa?forumID=41&threadID=1130403
Regards,
Melwyn.

Creating objects that contain objects

What's the best practice for creating an object from a table that contains a list of objects from another table? For example, say I have an employees table:
EMPLOYEES
id name
1 Derek Epperson
2 Judy Johnsonand I also have an equipment table that contains all the equipment belonging to each employee
EQUIPMENT
id emp_id name
101 1 Laptop Computer
102 1 Flash Drive
103 2 Desktop Computer
104 2 Wireless RouterI want to create a Java function that will return create a List of two Employees, each with a List<Equipment> of that employee's equipment. One option is to create the Employees and then query for Equipment separately, like this:
List<Employee> employees = myDAO.getEmployees();
for (Employee employee : employees) {
employee.setEquipment(myDAO.getEquipment(employee.getId()));
}However, that is a lot of database calls. Is there an easy way to do this in a single query?

By JOIN, you mean connect them so that a query will return something like this?
EMPLOYEES
id name equip_id equip_name
1 Derek Epperson 101 Laptop Computer
1 Derek Epperson 102 Flash Drive
2 Judy Johnson 103 Desktop Computer
2 Judy Johnson 104 Wireless RouterThen I would have to check on each row whether the id had changed, a la:
rs = ps.executeQuery(getEmployeesAndEquipmentJoin);
int previousId = -1;
Employee employee
while (rs.next()) {
if (rs.getInt("id") != previousId) {
 previousId = rs.getInt("id");
 employee = new Employee(rs);
 employees.add(employee);
employee.getEquipment.add(new Equipment(rs));
}That seems a little awkward, but if that's the best way to do it without ORM then I can work with that.

Create page that contains buttons

Similar Messages

Maybe you are looking for