Create partner type

How do i create new partner type in we20? for example KU , LI, LS.
Regards
Abdull Hakkim . K
Edited by: abdull hakkim kaja mohideen on Feb 25, 2008 11:06 AM

In the transaction SALE -
> IDoc Interface/ALE ---> Model and Implement Business Processes -->Partner Profiles -
>process partner types.
Click on New Entries to add ur own partner type.
The corresponding IMG activities are Default Outbound Partner Profiles (WE24) and Default Inbound Partner Profiles (WE27).

Similar Messages

What is the need of creating partner functions for sales document type.

Hi SAP (SD-GURUS),
Actually we create partner functions before creating customer ex: sold to party, ship to party, bill to party, and payer.
These partner functions are going to be copied into sales order while processing sales order.
Again what is the need of creating partner functions for sales document type.
Thanks&Regards
sreenivas peruru

There are some Partners you could enter at Sales ORder Level. E.g. Sales Person, Employee Responsible, Forwarding Agent, Broker, etc.
Thus these partner Determination need to be carried out at Sales Order Level & not at Customer Master level.
So we have to configure partner Determination for various levels e.g. Customer Master, Sales Order, Delivery level etc...
Hope this helps...
THanks,
Jignesh Mehta

Can we create new partner types for quallity notifications in SAP system?

Can we create new partner types for quallity notifications in SAP system?
The business requirement is to limit the available entries for partners displayed when they search in quality notification. I have already created new partner functions & assigned the relevant partner types, however struggling with defining new partner types.
Would appreciate help in resolving this.
Thanks,
Nilesh

I know this customisation setting ...It allows us to create the partner functions & assign it to the partner determination procedure.
Then you can assign the procedure to the notification type.
This customisation setting does not solve the problem I have.
I'm looking for the partner type creation process which we assign to the partner function.
Edited by: NILESH BHAVE on Aug 12, 2010 3:06 PM

While creating partner profile, if the partner type is u0093LIu0094 what r the sett

While creating partner profile, if the partner type is LI what r the settings we need to configure?

Hi Chiru,
For a IDOC to File scenario, just follow these steps:-
SLD-
1) Create a Product/Software Component
2) Technical System pointing to R/3 system
3) Business System for the above technical system
In the Repository
1) Import the Software component created in the sld
2) Create a namespace,
3) import the idoc and then create sender data type/message type etc and mapping
4) Mapping Rules is depends on the requirement
In the Directory
1) Create a Scenario /import the business system
2) Create Receiver/Interface determination
3) Create communication channels for sender and receiver
4) Sender Agreeement and Receiver Agreement.
Then the file adapter configuration is depend on the input file format.
Also you need to have Logical destionation created in the XI , and the IDX1 entry
In R/3 Port, Partner profiles etc should be created
Have a look into this document~
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
In addition do the following in XI:
1. SM 59 - Create RFC destination pointing to R3.
2. IDX1 - Create a port for R3
3. IDX2 - Import IDOC metadata.
I hope this provides you a solution.
Regards.
Praveen

Where can I create Partner Role type (TSW003-supplier) for TSW

HI IS OIL Expertise,
Where can I create Partner Role type (TSW003-supplier) for TSW?
Because while creating partner role @T Code: O4TQ @ Role Assignment” TSW003-supplier” not available on drop-down list.
please do needful on this.
Thanks
Chandra

Hello Chandrasekhar
As you know that Partner Role is -
"The master data record of a partner role is used to define a business partner. The partner role includes information about the activities that the business partner can carry out and where the business partner carries out these activities. Stock-holding objects, such as plants and storage locations can also be defined as partner roles."
According to your screen shot and question, you want to define the TSW003 which only shown when you enter Vendor code in initial screen i.e. O4TQ.
Thanks
Yogesh

Error while creating Partner Product Ranges

HI All,
I am working on Mobile Sales For handhelds module. I have created PPR types and now creating three PPRs:
ZHH_USERS                   PPR for Users
ZHH_Accounts                 PPR for accounts
ZHH_Products                  PPr for products
While creating the PPR (crmm_ppr transaction) , what is the Item tab? what values need to be fillled in the fields: Item Selection and ID/ Description? Right now I do not have any values in the drop down menu. Where and what do I need to configure? What is the purpose of this configuration?
I am gettign an error : field 'PROCESS_QTY_UNIT' is not defined for PPR type 'PRP_BUPA_I' / 'ZHHU'/RefType1'!
Please explain the meaning of this error.
Thank You
Rucha Atre

Have you checked your config settings.
Search for "Permissible Partner Roles per Account Group" in SPRO
Make sure the vendor account that you are creating is using an account group that has your new partner in it.

Problem with External List Management; Business Partner Type

Hello experts;
I created a mapping format for importing a simple notepad file. In the ELM i see all my fields populated correctly. Once i start the importing process it goes smoothly with no mistakes at all (green lights). The bp is actually imported and i can see it in the BP transaction with most of the fields correctly imported BUT the business partner type (PERS_PERS_BPKIND in ELM). For this field i have a Constant Assignment which is always HH and because of that i don't have it in my notepad file but i pass the value directly from ELM constant assignement=HH. Unfortunately this value is not copied. Any idea? Am i doing something wrong or i'm loosing some steps in between?
Thank you very much

Hello,
the issue is most probably related to missing authorizations. As you know the processing in external list management happens in the background using WF-BATCH user.
Please check the following notes:
708557 - 'ELM: Troubleshooting' point 1.
https://service.sap.com/sap/support/notes/708557
1912414 - ELM upload: Error in the map data-step
https://service.sap.com/sap/support/notes/1912414
1664498 - External List will not execute
https://service.sap.com/sap/support/notes/1664498
The information provided in the notes should help to solve the issue.
best regards,
Johannes

In XML Gateway Responsibility How to add User defined Trading Partner type.

Hi,
We have a requirements to add user defind Trading Partner Type apart from the default trading partner type.
How to do this? If any one know , kinldy let me explain it
Thanks

I looked it up in the mean time ...
The docs state that you only can use simple data type or java.util.list or AttributeList (which is a wrapper for any viewRow). So I guess you have to somehow flatten your complex data type or create a custom VO which holds it.
http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcextservices.htm#CJAEHFJD
Scroll down to 11.2.3
Timo

Idoc partner type LI to File Scenario.

Hello Experts .
I have the following scenario.
IDOC partner type LI to xml (file).
So we are not atlking about logical system here and we may have to use parties.
But I am not sure as to how to go about this approach.
For now we have Idoc coming into XI but failing after that .(Outbinding) error in reciver agreement (not to be confused with a cache issue .).
But I understand it is because of the parties not defined properly.
So I have defined a party and assigned my ECC system to the same.File was basically a service.Do I need to define another party for it or several other identifier
Tried to follow How Tou2026
Sample IDoc-XI
Scenarios document but it is to confusing.
Kindly help

Thanks for your reply.
Well I have already tried this approach.
That is
Created a party :Sender_party.
Identifiers :
<sapid><client>   :*ALE#LI* :<venderno>   actually ALE#LI #LF "otherwise I end up with party service not found.
Receiver determination:
sender party
<BS/service> i.e. <sapid><client>     to mail_service (for testing to see if I recieve a payload)
<interface>
<urn>
Interafce determination
sender party
<BS/service> i.e. <sapid><client>     amd   <interface> interface mapping
<urn>
Reciever agreement.
mail_service : reciever mail adapter.
Error recieved.

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_NOT_FOUND</SAP:Code>
<SAP:P1>-DMGCLNT400</SAP:P1>
<SAP:P2>Sender_Party-,urn:sap-com:document:sap:idoc:messages.Z_DELL_PO.ORDERS05.Z_DELL_POX</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver agreement found for sender -DMGCLNT400 to receiver Sender_Party-,urn:sap-com:document:sap:idoc:messages.Z_DELL_PO.ORDERS05.Z_DELL_POX</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Kindly note nothing is wrong with cache .
It is strange DMGCLNT400 is already assigned to the party . .

Receiver partner type in control record is default"

Hi all,
I am Getting 56 Error"Receiver partner type in control record is default".
When I go to that perticular IDoc under control record under parter tab I am providing "PARTNER TYP" AND PORT.When I save these details th idoc is getting posted.
The port ifo is present in we21.I checked RFC Destination,It is fine.
Now where to give this information centrally since I have to manually enter this every time.
Thanks,
SrinivasaP

Hi,
If error is 56.
Check the partner profile is created or not, if not create partner profile, restart the process by TA.BD87.
If partner profile is exist then check the control information in the IDoc file is incorrect. Correct the IDoc file and restart the process
Please check receiver IDoc Adapter is configured with the said details are not.
And if possible map the values in EDI_DC40 control record.then you need not to give these details every time.
Regards
Chilla..

Need F4 Help for custom container element based on partner type

Hi Friends
I am displaying customer details in custom container .In that custom container I have a field Partner number,Partner type etc etc..
I included F4 help for partner number field, In that I referenced the following field.Now its coming perfectly.
wa_cat1-f4availabl = 'X'.
wa_cat1-ref_table = 'KNA1'.
wa_cat1-ref_field = 'KUNNR'.
But as per my requirement, customer wants to get the different F4 help when the partner type eq "Contact Person".
Rest of the partner type(Ship to party, Sold to party,Reseller, End user) should show the above one.
So I dont know, where I have to change, because in the field catelod level there is no option to control particular type in the column.
Kindly help me on this.
Thanks
Gowrishankar

Hi Jose
Thanks for your Input.I created Event Receiver than Defined and implemented a method to get F4 help for customer number and email id field.Already F4 help is available for Email ID.Now I want to Include the F4 help for partner number field, it will call the search help based on partner type.I can able to get the partner number field search help, but F4 help is not working for email id.
I am not sure some whee its over writing some values or I am not sure.If I comment partner number F4 help class, I can able to get the F4 help for email address.
Plz guide to me to fix the same.
Thanks
Gowrishankar

Busines partner type field

Hi Gurus,
I need a clarity in a field name Business partner type.In my interaction center I dont see this.I wud like to select if its a person,organization or if its a group.But this particular field is not visible in my screen.Iam using UTIL_IC role.Can you pls let me know what would be the exact setting to make it visible??
Thanks
crmbug

Hi,
It is not possible for USER Default Print method for Aging Report.
it is possible only for Marketing and Banking Document.
It is possible on PLD but it is not possible in Page Header on Aging Report PLD.
Try this,
->> Open the Aging Report PLD.
for example,
BP Code Field ID in Repetitive Area -> F_110
->> Create 1 formula Field in Repetitive Area Header and put the below formula in that field.
ex. Field ID -> F_160
Substring(F_110,0,1)=='C'
ex. Field ID -> F_161
->> Create 1 formula Field in Repetitive Area Header and put the below formula in that field.
Substring(F_110,0,1)=='V'
->> Create 1 TEXT Field in Repetitive Area Header and type the below text(for Title).
->> Assign Link to Option in General Tab on Properties Window.
Customer Aging Report
Link to - F_160
->> Create 1 TEXT Field in Repetitive Area Header and type the below text(for Title).
Vendor Aging Report
Link to - F_161
Save and Run the Print Preview.
Regards,
Madhan.

Regarding Partner types LI and KU in WE20 transaction

Hi,
I want to send a purchase order to a particular vendor through EDI. When ever I create a PO if the customer is CUST1(for example) and vendor is VEND1(for example) then only EDI should trigger. Pls give me the possible configuration steps. <b>Is it possible by using LI and KU partner types in WE20.</b>
Points will be awarded for all helpful points.
Thanks&Regards
Giridhar Karnam

Hi Giridhar,
Please check the tab Permitted agent that might be used for specifying the vendor name.
I think these validatikons can be carried out while executing the Function Module.
Regards,
Ravi G

Where do we define partner types like KU,LI,VS,LS...?

where do we define partner types like KU,LI,VS,LS...?

Hi,
SPRO>S&D>BASIC FUNCTION>PARTNER DETERMINATION..
Their u can select area where u want to define them.
Only clicking after one of the options u will se partner function on the left side of ur screen, double click on it.
There u will see all the partner functions...here u can create new partner function or use the available one..
Hope it helps.
Thanks
Dushyant

Define New Partner Types

Hi,
Where and how do we define new Partner Types (e.g., KU - Customer, WK - Plant etc.) ?
Regards,
Piyush

Hi Piyush,
You can go to the following path.
SPROSDBFPartner determinationSet up partner determination---Set up Partner determination for Customer master (or for any other transaction too)
Here you can see that partner types are also defined along with the partner functions we use. We can copy the partner type and create a new one.
Whenever we create a new Partner Function, the function has to be assigned to one of the partner types so that the partner function can behave as the partner type. For example if a partner function is assigned to partner type KU, then a partner of that PF can behave like a partner type.
Reward if it helps.

Create partner type

Similar Messages

Maybe you are looking for