Create person in om

Hi all,
How to create person in OM?Can Anyone tell me?
Regards
janhavi

hi
you can't hire but you can assign the person to that position.
by this you will......you implement integration between Organizational Management and Personnel Administration.
the person who is listed as an employee in Personnel Administration is assigned
Regards,

Similar Messages

Error while creating Personal data

Hi All,
I do not belong to SAP HR area , i was creating Personal data using PA30 ..here on entering First name & last name , on saving i get the below erro :
Entry does not exist - check your entry
Message no. 00 058
Diagnosis
Input values must be defined in Table V_T522G. The value or values ' ' are not specified in this table.
Procedure
Check whether the input is correct and correct if necessary.
Procedure for System Administration
If this is not an incorrect entry, check the system settings and change them if necessary.
If there is a connection to the Customizing system, you can maintain the system settings by choosing Maintain entries (F5)
I followed the error and have gone to view V_T522N_A and made some entries .. but still i get the same above error .
Note : I am getting the above error for a particular personnel area assigned to country code 29 ..
Provide some inputs on the above.
Regards
pushpa

Hi Pushpa,
This might be because of blank value in field P0002-ANRED. Field 'Title' in infotype 0002 for Argentina is mandatory, so it should not be hidden.
Anyway, as a workaround for your requirement, by creating a empty entry in T522G the issue should be solved.
e.g. create an entry just with Gender '1'. Once that entry is created, then modify it by deleting the gender value, therefore that entry is empty in all the fields.
Anyway, this is a workaround. It is not possible to hide Title field for Argentina.
Regards,
Li

How to create personal number

Hello everybody ,
please tell how to create personal number in Tcode :- PA40 please mention the steps

hi sandeep,
do the followings
1.) go to PA40 check the customization ,,,if exists...then personal no will automatically be generated.
2.)otherwise....go to PA40 ..it will have some screens ...fill the mandatory fields.....save it and personel no. will automatically geanerated
thnxs n regards
sachin
njoy life

How to create personal templates in SRM 4.0

Dear all
We are upgrading from EBP 3.0 to SRM 4.0 and we don't see in SRM 4.0 how to create personal templates.
The transaction BBPSC05 Create template create central/public templates and not personal ones (also if given to a basic user).
1) In the Shopping Cart we can go to Old Purchase Order and Tempaltes and there we can select on status Personal Template but were can we create them?
2) Additional question, how can we limit the availability of a public/central template to a certain users from some company or plant or ...
Thanks

Hi RD,
1) for detailed explanations read my answer in this thread:
SRM 4.0 Shopping cart templates
2) such limitation does not exist in SRM, even if often asked by customers: the possibility to maintain templates centraly at a level between the public (every user can see them) and the private template (only the user can see them). So you would have to change the standard search logic on templates, and implement an additional serach criteria.
Rgds
Christophe
PS: please reward points for helpful answers

How to create Personalized urls

how to create personalized urls like firstname.lastname.abc.com with out making any individual sub-domain records in DNS

Hey Ben,
Yes it is possible to create dynamic URL's.
1. Simply select the link from the table like so.
SELECT PK_ID,
       NAME,
       LINK
FROM IMAGE_INFO2. Edit the region and go to report attributes.
3. Click the pencil to edit the link column.
4. Scroll down to the column link section and enter something like 'View' as the link text. You can change that to whatever you like.
5. Change the target form page in application to url.
6 In the URL text object enter *#LINK#*. This will substitute #LINK# for the value that is returned by the sql statement in the LINK column.
Seeing how you are linking to an image you could just do something like this:
SELECT PK_ID,
       NAME,
       '<img class="mug_shot" src="' || LINK ||'" title="'|| NAME ||'" alt="'||NAME ||'" />' IMAGE,
FROM IMAGE_INFOThis will generate an image tag and show the image inline with the record. Since this species a class you could use CSS in your header section to format the image to a standard size. Something like:
<style type="text/css">
.mug_shot{
   width:200px;
   height:200px;
</style>Good Luck,
Tyson
Edited by: Tyson Jouglet on Jan 12, 2009 4:13 PM

Creating person page in Portal release 2

Can anyone please provide me the steps in creating personal pages and how does the user can get access to it?
Thanks,
Marcelo

Hi Mere!
It is not an API but I am using PORTAL.WWV_THINGSAVE.saveitemCan you also tell me how to display item programmaticaly?
Thanks in advance,
Ervin!

Support message doesn't show automatically the details about created person

Hi,
I'm facing an issue with Support message which has been created in Sattelite system and available at Solution manager system . The issue is , support message doesn't show automatically the details about created person under colum ' Contact Person ' . Please provide your great suggestions , thanks
Regards
Vivek

Hi Vivek,
Check if BP is created for that user and you have mapped to satellie system (identification tab)
e.g TRXN BP create business partner for that user and in identification tab maintain
ID type identification number
CRM001 <SID> <inst number> <CLNT> <User> (satellite system details)
Regards,
Shyam.

Create Person & Assign to Activity - CATS

Hi Experts,
I need to create persons and assign it to the internal activities in person assignment tab and use for CATS.
We are not implementing HR module. Please suggest and advise.
Thanks & Regards,
Kabir

Hi Kabir,
1. You can create person through Mini-HR. T.COde is PA30. you have maintain following ifotypes 0,1,2,6,7,105 & 315. No need of HR module
2. Create activity type in CO & maintain rate in KP26
3. Create workcenter and assign person & activity type in it.
4. Attach this workcenter in Internal activity
5. Do the workforce planning in CMP2
6. Book the time in timesheet using CAT2
7. Transfer the time to PS using T.code CAT5
Hope, this will help you.
Regards
Prabu

How to block user create personal view and select ALL VIEW?

How to block user create personal view and select ALL VIEW?

Hello,
>create personal view
To restrict creating personal view, you need to modify your existing permission level or create new one. Login with admin account to your site and open role.aspx page (http://siteurl/_layouts/role.aspx). Then click on existing permission or add new permission
level-->and move to "Personal Permissions" section-->uncheck "Manage Personal Views - Create, change, and delete personal views of lists" option. Later you can assign this permission to all users, whom you don't want
to allow to create.
>and select ALL VIEW
Since SP does not supports view level permission directly so you have to use custom solution or use below designer solution to restrict user to open any view.
http://www.codeproject.com/Articles/433486/How-to-set-view-level-permissions-out-of-the-box-i
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

How to create personal site using csom ?

I am using Office 365. I am trying to create personal site using following code
private void createPersonalSite()
try
//using (SPSite site = new SPSite("Site URL"))
//SPServiceContext context = SPServiceContext.GetContext(site);
var targetSite = new Uri("https://test/sites/18thFeb");
var securePassword = new SecureString();
foreach (char c in adminPassword)
securePassword.AppendChar(c);
adminUserId = "[email protected]";
var onlineCredentials = new SharePointOnlineCredentials(adminUserId, securePassword);
ClientContext clientContext = new ClientContext("https://test/sites/18thFeb");
clientContext.Credentials = onlineCredentials;
//Get user profile
//// Get the PeopleManager object and then get the target user's properties.
//Microsoft.SharePoint.Client.UserProfiles.PeopleManager peopleManager = new Microsoft.SharePoint.Client.UserProfiles.PeopleManager(clientContext);
//Microsoft.SharePoint.Client.UserProfiles.PersonProperties personProperties = peopleManager.GetPropertiesFor("domainName\\userName");
//personProperties.UserProfileProperties.
Microsoft.SharePoint.Client.UserProfiles.ProfileLoader loader = Microsoft.SharePoint.Client.UserProfiles.ProfileLoader.GetProfileLoader(clientContext);
Microsoft.SharePoint.Client.UserProfiles.UserProfile profile = loader.GetUserProfile();
Microsoft.SharePoint.Client.Site personalSite = profile.PersonalSite;
clientContext.Load(personalSite);
clientContext.ExecuteQuery();
// Let's check if the site already exists
if (personalSite.ServerObjectIsNull.Value)
// Let's queue the personal site creation using oob timer job based approach
// Using async mode, since end user could go away from browser, you could do this using oob web part as well
profile.CreatePersonalSiteEnque(true);
//clientContext.ExecuteQuery();
catch
int a = 10;
The above code runs without any exception but does not create personal site. Can anyone please let me know what is the issue? Can you please provide me any code or link through which I can resolve the above issue?

Hi,
According to your post, my understanding is that you want to create personal site using Client Object Model in SharePoint Online.
The following code snippet for your reference:
public void CreatePersonalSiteUsingCSOM(string tenantAdminUrl, string userName, string password, string[] emailIDs)
using (ClientContext _context = new ClientContext(tenantAdminUrl))
try
SharePointOnlineCredentials _creds = new SharePointOnlineCredentials(userName, Utilities.StringToSecure(password));
_context.Credentials = _creds;
_context.ExecuteQuery();
ProfileLoader _profileLoader = ProfileLoader.GetProfileLoader(_context);
_profileLoader.CreatePersonalSiteEnqueueBulk(emailIDs);
_profileLoader.Context.ExecuteQuery();
catch(Exception _ex)
throw;
More information is here:
http://blogs.msdn.com/b/frank_marasco/archive/2014/03/25/so-you-want-to-programmatically-provision-personal-sites-one-drive-for-business-in-office-365.aspx
Best Regards
Dennis Guo
TechNet Community Support

How to create person in Organisation staffing ?

Hi
I need to know how to create person in Organisation staffing.......Object type P ?
thanks in advance,
R

Hello Jai and IA,
About discussion of RSWUWFML2
As per my understanding -
Notification - This report sends out notification of dialouge workitems in ready status to the agents and also to substitutes. This is nothing but email in outlook/lotus/any other mail system. The content is decided by the description of task of the dialouge workitem. This is basic functionality along with several other add ons too
Send out WI - One of the option in the above report is to attach an executable attachement . There are three types of attachemnt - execute workitem, display workitem, display inbox. If this is what can be called as 'sending out WI' then yes it sends out WI.
If say; you are using position then as agent determination then it will find the user name attached with that position and send out work item to that user, but it wont derive the email addresses
I understand using position as agent determination
but i dont understand using position in send mail step of workflow. what is the use of putting position in the recipient section of send mail step ?
Coming to the actual question: Maintaining Person is not the solution. For external users, ztable should suffice or use SAP's TVARV table :
is it not possible to use Person as suggested above ? which i am putting in steps below.....
1. Create Person object (I dont know difference btw Person and CP, will check that)
2. Maintain email address of Person object as infotype 0105
3. Place the Person object as required in the heirarchy in Org staffing (PPOMW)
4. insert a step in workflow that will pick that correct Person object as required and read the email address in 0105 and pass it to the SOXNA table container element of workflow
5. Pass this SOXNA container element to the send mail step by putting 'Expression' in the recipient section
This way you can accomplish sending email notification to external email address of non SAP users.
I am doing these steps to check andwill let you know the result.
I cannot use Z table , the client strictly disallows that. I will check in TVARV.

Creating Personal Area and Subarea.

To create personal area and subarea, do i maintain them in transaction SM30 ? If yes, is there any reference on how to go about it ?

Hi,
can you be more precise on the requirement i.e. do you want to create Sub Screen (using module pool programing) or do you want to create a maintenanve dilog for the custom table.
Regards,
Raghu

Create Personal Documents Folder and iView to display

Hi, I would like to
1. Create an KM Navigation iView to point to a users Fersonal Folder
2. Create an KM Upload iView to upload documents to a users Personal Folder
These iviews should point to a users personal folder dynamically based on who is logged in.
Also,
3. I am noticing that there is no Entry Points Folder or any personal user folders set up. Can anyone give me some direction how to create these or get them to appear?
Thanks for any help with this!

Hi, Thanks much for the quick reply. When I added this path I end up in my top level user name folder KMURRAy. The screen shows up as follows:
KMURRAY
==> actioninbox
==> Favorites
==> Personal Documents
I was thinking that your solution would might put me in the "Personal Documents" Folder. I next just added '/Personal Documents/' to the end of the intial folder parameter to be put directly int my "Personal Documents" folder.
This is great. Thanks again for the help. Greatly appreciated!

Created Personal .Mac Web Page iMac Hard Drive Crashed Have TimeMachine

Ok this is simple my iMac 24" 2.33mhz hard drive went out and my display and my Optical Drive,
I had backed up using Time Machine. But what I want to get is my . Mac and iweb backed up
together when I open iweb App. My personal website isn't showing,
It wants me to create a new iweb site. .
Ok I went to USB Drive that has iMac's Time machine backup on it and went into
~Library-Applications Support>iweb Folder shows Domain.sites 2, I've tried to revert iWeb back to
The Domain.sites 2
which was in the folder mentioned above.
Please help, how do I bring back my iWeb template that I have created and finished and also created
A 2nd web page to have it hosted, and it's gone to? Where is my iWeb files located that
Time machine backed up from the iMac 24" that went down?>
ALL I WANT IS TO GET MY 2 WEB PAGES BACK THAT I CREATED WITH IWEB, ONE TO USE ON . MAC
AND THE OTHER TO BE HOSTED AND I CAN'T FIND EITHER OF MY SITES THAT I CREATED FROM
IWEB'S TEMPLATES...

Ok I found in the ~Library>Application Support>iWeb>2 Domain Sites
I put the 2 domain sites into my new Application Support> iWeb Folder
Opened iWeb to find that nothing has changed please go into detail of how I can
fix this problem and you said to click the TM icon in the dock what is TM I'm sorry
I don't know and the only way for me to learn is to ask
Thanks for the reply
Michael

How to create Personal Calendar

Anyone know how make personal calendar. I mean is that if any user login into portal and view calender app. he/she can only view the activities that he/she created not the whole activities on the table.
Thanks.

Hi Viral,
I created a report, for which i want to pass some user parameters like from_date and to_date. So, i want to create a value set which will show a calendar when we click on that, while we are passing parameter.
for ex: in po_approval when we click on need by date a calendar appears , i want it the same way to come for my user defined parameter.
--regards
--raj

Create person in om

Similar Messages

Maybe you are looking for