Create personnel subareas

Hi experts,
I just enrolled the course SAP HR module and hope you won't think my questions too stupid.
I tried to create my personnel subareas from SPRO's enterprise structure. This was what I wanted to do:
Personnel area: 0000
Personnel subarea: 01, 02, 03, 04, 05, 06 (all under personnel area 0000)
However, I kept getting an error message: "01 doesn't not exist in (check entry)" when I tried to create personnel subarea 01.
Do you know what was the problem and how should I fix it? Thanks in advance.
Catherine Sum
P.S. Sorry I just finished my third SAP HR class, please give me step by step instructions if possible.

Hi Catherine
Are these defined in V_T001P
Before you can use the HR system the way you want to you have to ensure the IMG (SAP Implementation
Guide - transaction SPRO) is completed
It is possible one of the IMG steps will require you to check or update V_T001P
Best regards
Stuart

Similar Messages

  • HR: Mass Update Personnel subareas

    Hey All,
            I wanted to know if there is a way to mass update the personnel subareas for all the personnel areas in HR. I know that we can maintain the personnel sub areas in SPRO but doing this manually is going to be very time consuming since we have lots of data to update. Is there any other way, any BAPI I can use, Any transaction i can create an LSMW of.
    Any input is highly appreciated..
    Thanks.

    Thank you for your input. I have used HR_MAINTAIN_MASTERDATA to update infotypes to a peratining user but how do i use it to update personnel areas in general??
    I am talking about updating subareas to personnel areas in general, not related to a particular emloyee.

  • Incorrect combinations for personnel area and personnel subare

    Hi all,
    we are getting incorrect combinations for personnel area and personnel subarea in the Target and as well in report.
    we are using standard datasources 0PERS_AREA_TEXT and 0PERS_SAREA_TEXT, we are extracting only masterdata text from ECC, Not maintaining Attibute and Hierarchy for personnel area and personnel subarea.
    we created (Actions overview) report on top of standard DSO 0PA_DS12 extracted from data source 0HR_PA_1,
    Actually some of employees are changed on xxxx.xx.xx date from one personnel area to another personnel area with respective subarea's, but here employee personnel area are coming correctly but not for subarea.
    what i need to do now?
    can any one help out in this..
    Thanks in advance.
    Thanks,
    Sri

    Hi,
    In this context we will have two senarios.
    1. Displaying the Personal Area and Personal Sub Area from Transactional data.
    2. Displaying from Master Data.
    If you choose Scenario 1 then, Personal Area and Personal Sub Area will be shown as per ECC entry. But in second scenario, If one Personal area or Personal Sub Area changed over a period of time that will effect the historical data also.
    For Example if your Personal Sub Area changed on Apr 1, 2011.
    Scenario 1: Report will be as per ECC Data ( from Apr 1, 2011 onwards it will show new Personal Sub Area).
    Scenario 2: Report will show new Personal Sub Area of Personal Area for entire data.
    Hope this will help you.
    Regards,
    Chenna.

  • How to Create Personnel Area

    All HCM (HR) Community -
    I am new to SAP and I just started online training on SAP HCM...is there anyone out there who can help me with creating Personnel Area? My question is that I am trying to Create Personnel Area and I'm kind of lost in transition. I would really appreciate any help I can get.
    Regards,
    Obra

    Obra,
    Is there an existing Personnel Area to copy? If not, search though SAP web sites for direction. If so, go through the IMG as you have.
    Double click the activity u201CCopy, delete, check personnel areau201D.
    Press the u201CCopyu201D button. Press u201CEnteru201D.
    Provide the Personnel Area to be copied.
    Provide the Personnel Area to be created.
    Press u201CContinueu201D. Press u201CEnteru201D three times.
    Then SAVE.
    There will be a delay while the system copies the record.
    Press the u201CEnteru201D button.
    Press the green u201CBacku201D arrow.
    Double click the activity u201CPersonnel areasu201D.
    Press the u201CPositionu201D button near the bottom of the screen.
    Enter the newly created u201CPersonnel Areau201D, and then press u201CEnteru201D.
    Select the Personnel Area, and then press the u201CDetailsu201D button.
    Change the appropriate fields.
    Press the last button on the tool bar that resembles an envelope.
    Maintain what is required.
    Then SAVE.
    The navigation path supplied earlier also leads to Personnel Subareas, Employee Groups, and Employee Subgroups. These may already be defined. If not, you need may help brainstorming the ultimate requirements for the future. One of the things to consider is whether or not you are now or will be using the Payroll module. Personnel subareas could be used to define the shift on which an employee works if youu2019ll have people doing shift work. Employee group and subgroup fields sound like a good place to define direct and indirect employees.
    Navigate as follows to assign a Personnel Area to a Company Code:
    Enterprise Structure > Assignment > Human Resources Management > Assignment of Personnel Area to Company Code
    If you are running payroll in the US, Personnel Area is the basis for accumulating wage and tax information by legal entity. The Tax Company Code is SAP terminology for the legal entity. To assign a Personnel Area to a Tax Company Code, navigate as follows:
    Payroll > Payroll: USA > Tax > Tax Companies > Assign tax company to personnel area
    You may find the following Wiki helpful, although it doesnu2019t directly relate to creating Personnel Areas. The URL is:
    http://wiki.sdn.sap.com/wiki/display/ERPLO/SAPSDFrequentlyAskedQuestions
    Regards,
    Howard
    Edited by: Howard Gardner on Jun 29, 2011 12:55 AM

  • Group Personnel Subarea for Work Schedule

    Hi All,
    I am learning SAP HCM ECC 6.0 at the moment, I have created Personnel Area, Personnel Subarea however when I am trying to u201CGroup Personnel Subarea for Work Scheduleu201D the newly created Personnel Areas and Personnel Subarea are not appearing the list to group them for work schedule.
    No such problem persist while Defining employee subgroup under work schedule rules and work schedule in IMG.
    Experts could you please suggest me the solution to this problem? Is there any integration missing?
    Thanks,
    Jitend

    Thanks a lot Prateek, Sujit and Ravee
    The problem is been resolved by editing in Table "V_T500P" (Country grouping), now newly created PAs and PSAs are appearing in the list and I can "Group personnel subarea for work schedule"
    I did the the basic configuration of PAs, PSAs, EG, ESG and I assigned them to company code however PAs and PSAs were not appearing in the list to group them for Work Schedule. The problem is been resolved now by editing in Table.
    I really appreciate your help here.
    Edited by: Jitendk on May 31, 2011 12:11 PM

  • Personnel subarea

    dear all
    when i create personnel area there are button called address if i need to maintain extra information like address ,name 1,name 2 ,telefone number...etc this button isnot found in personnel subarea is this possible to add it?

    Hi Raul,
    1st we have created one table called location table which contains columns MOLGA, PSA code, PSA Desc, Market unit which was client requirement and Address number which is sequence number for PSA. We can maintain manually.
    Then we have created another table which is called address table and address is stored in this table based on sequence number.
    Then we have created a new subtype for address infotype which will display address based on PSA. In this sub type all fields are display mode only. 1st system will find out PSA > based on PSA what sequence number from location table > which address for this sequence number from Address table.
    Hope this will help.
    Regards,
    Purnima

  • Copy, delete, check personnel subarea and Number ranges

    Hi All,
    I am creating a new personnel subarea using copy the personnel subarea in enterprise structure definition.
    (Copy, delete, check personnel subarea)
    While doing this I am getting prompt about number ranges over writing issue.
    It seems that number ranges in production system may get affected due to this transport.
    So I am planning to note all the available number ranges in production system before transport and reset similar as earlier after the transport directly in production
    OR
    set number ranges in development similar in production then to transport to production.
    Please comment on the above approach.
    I am planning to check on the following number ranges only
    Tcodes u2013OONR ( for OM)  and PA04 (for PA)
    Can you suggest in case if any other number ranges to be taken care?
    Regards
    Thomas

    Hello,
    Do you have another option for the copy  : Copy (without reference) ?

  • Updation Error in "Group Personnel Subareas for the Work Schedule "

    Hello everyone,
    While trying to assign a PS grouping  code to my Personnel Area here, I am facing a problem.
    I can't see them in the table mentioned above .
    Already checked the previous steps in Enterprise structure i.e creation PA and PSA, they are displayed properly in respective tables but I can't find them here in grouping for work schedule.
    Could any one of you be kind enough to throw some light on possible errors and their solutions.
    Thanks & Regards,
    Vibhu

    Hi,
    Just now I am able to sort out this problem, Actually we need to carry out "Maintain User Parameter" activity under 'Personnel Administration'
    IMG Steps are as follows :
    SPRO => Personnel Management => Personnel Administration => Basic Settings => Maintain User Parameters
    Following screen will come up
    here select the country you like to work on (in my case it is India)
    Select Continue
    A pop up will come stating "Parameters created for India"
    Select Continue
    User profile screen will come up
    Save it
    Now go to time management section of IMG
    Go to "Personnel subarea grouping"
    Personnel areas belonging to your country grouping will be displayed on screen.
    Thanks,
    Vibhu

  • Sample Data Used in Personnel Subarea and Employee Subgroup

    Hi HR Guru,
    Can anyone give me some sample values you used in Personnel Subarea and employee Subgroup?  Our company is looking into HR implementation.  We just wondered how other SAP customer's configuration for this field. 
    Thanks!
    RL

    Hi Reiling,
    There are plenty of threads here that describe the concept of personnel area/subarea, employee group/subgroup. You can also check SAP documentation.
    Based on that and your organization set up you should be able to chalk out the personnel structure.
    Donnie

  • Personnel subarea inheritance issue

    Hi,
    not sure if this is an abap or functional question, so I started here.
    I have a report using Logical Database PNPCE to find some values from a couple of info types. When I select a unit (from the 'OrgStructure' button at the top of the screen), say 111, and all its sub-units with no selections in the selection screen, I get one person displayed. This is correct and this person is in a sub-unit 3 levels down (unit 333).
    I then added a selection to only display people in units with Personnel SubArea 'OTEC'. Now I get no results output. When I look in PPOME, I can see that unit 333 has Personnel SubArea 'OTEC' but it is inherited from '111'.
    In PP01, unit 111 has an Account Assignment entry (Info Type 1008) but 333 does not.
    Does anyone know how to report on this?
    Is there a flag somewhere that tells the LDB to check for inherited units?
    If not, any ideas if there is a function out there to find the superior unit for these sub-units?
    Thanks.

    Hi,
    I couldn't find a simple solution so have used the FM RH_CHECK_ACC_INPUT to get the parent org unit details.
    Thanks.

  • Authorization based on personnel subarea

    Hi All
    I have to set up an authorization for my HR users restricted upon their location of work. I have set up personnel subarea for the same. However, am not able to find the personnel subarea object in the profile generator screen for the role.
    For reference
    PA               PSA      
    Corporate      Gurgaon
    Plants           Panoli
                        Udaipur
                        Jammu
    Marketing      All Marketing Locations
    I want to set up an authorization for user to only be able to access Plants -> Panoli data
    Please advice
    Regards
    Lokesh Gupta

    hi,
    Have a look at this pdf.It may help u.
    http://www.sap-press.de/download/dateien/726/sappress_authorization_system_engl.pdf
    http://wiki.ittoolbox.com/index.php/SAP_HR_-_Check_your_basics-Answers-1#DATA_AND_AUTHORIZATIONS
    cheers,
    Manoj.

  • Change of personnel subarea results in change of legal person

    Hi Experts.
    I have search in this forum after answer on this question, but haven't find any.
    To start with, we have implemented CE.
    My problem is that if we have hired a person on wrong date and want to change the date to an earlier date, infotype 0000 is OK, but infotype 0001 will not be changed.
    The error message says: Change of personnel subarea results in change of legal person.
    I have checked the table V_001P_G and it seems to be right. I can't find any fault.
    I have tried all other suggestions I have found in this forum such as, Change and Execute info group when running Change entry/leaving date in PA30. Executing the programs RPUFIXDS and RPUP0001 with negative result.
    So if there is anyone who can explain to me what this error message actually means, and of course have a solution, I would be really happy.
    Thanks   //   Peter B

    Hi Peter,
    Apply the following note,
    1487263 - transaction PA41 error message is displayed in IT00
    after implementing, Kindly use transaction PA41.
    The 'Correct action' function (PA41) offers a special functionality for
    hiring and termination events only: When changing the begin date of
    the event the begin date of all infotype records belonging to the
    infogroup assigned will be shifted accordingly.
    Hope this will solve your issue.
    Regards,
    Meera

  • Error Personnel subarea grouping (MOABW) is not maintained.

    Hi
    Error message reflecting Personnel subarea grouping (MOABW) is not maintained while approving leave through MSS tab.
    Need help.
    Rgds
    RKG

    Hi;
    Can you check table V_001P_ALL
    You have to check personnel subarea grouping for absence and attendance types in the table
    Regards;
    Okan
    Edited by: Okan Caliskan on Sep 13, 2011 5:45 PM

  • Assign Personnel subarea to Public holiday calendar

    Hi experts!
    Now I'm meeting issue about Assigning Personnel subarea to Public holiday calendar.
    I have Personnel subarea is SAP. But in screen of Assign Personnel subarea to public holiday calendar, I don't see Personnel subarea is SAP. Why?
    Help me!
    Regards, Huy.

    Dear you!
    I processed the issue. Actually I only need access Enterprise Structure in IMG. Check again in part Assignment --> Human Resources Management --> Assignment of Personnel Area to Company Code.
    Thank you very much about Your Helping.
    Regards Huy.

  • Personnel Subarea groupings for a multiple country system

    We have more than 70 countries in our SAP system and more coming to be rolled out. We mainly use the HR funtionality for time recording. So, for the configuration of personnel subarea groupings in Time Recording we used the country grouping: e.g. Singapore Molga = 25, MOABW = 25, MOVER = 25, etc. For the 'SAP-countries (countries for which SAP has a template) we use MOLGA as personnel subarea grouping, for the NON-SAP countries (countries for which SAP has no template) we use a 2 digit number downwards from 98. Now we are running out of 'numbers'.
    Has anybody similar problems and can you please share with me possible solutions?
    Thank you very much and looking forward to your replies,
    Doris

    Dear Doris,
    Several other possibilities exist for the grouping (not only PSG),
    for example :
    A) the "Employee subgroup grouping for time quotas" (ESG)
    which is a char1 field (so you can use many more then the ones you
    use at the moment)
    B) field "Quota type selection group" (Quomo), from the documentation
    of this field in V_T559L:
    "Quota type selection rule group
    You can use the quota type selection rule group to control absence
    quota type selection based on the employee's organizational assignment.
    Using different quota type selection rule groups, you can set specific
    rules for quota generation.
    Use
    Quota generation is carried out in the schema using function QUOTA.
    There are three ways of setting the quota type selection rule group:
    1. Using function MOD in the time evaluation schema
    Function MOD calls a personnel calculation rule that has been modified
    to suit the respective schema (for example, XMOD, MODT, or TMOD). The
    employee subgroup grouping for personnel calculation rules is queried
    in the rule using operation PAYTP. Using operation MODIF Q=xx,
    you can determine (for ach grouping) which quota type selection rule
    group shoulde be used in time evaluation to access the entries
    for the relevant employees in the Leave Accrual table.
    2. Using a personnel calculation rule you have written yourself in the
    time evaluation schema
    In this case, you also set the quota type selection rule group using
    operation MODIF Q=xx.
    3. Using feature QUOMO
    You can use the feature to set the quota type selection rule group based
    on other organizational assignments. It is queried by the system during
    time evaluation."
    As your main issue seems to be the use of several different quota
    requirements, you can define, via the use of field QUOMO in V_T559L,
    for quota type 10 (just as an example) several different generation
    rules (one for each Quomo).
    Please note that quota 10 does not need to be always generated in the
    same way, it can have a different generation rule for each key
    combination of V_T559L.
    The most flexible way to select which quomo should be used is via the
    feature QUOMO. There you will have the following decision fields
    BUKRS  Company Code
    WERKS  Personnel Area
    BTRTL  Personnel Subarea
    PERSG  Employee Group
    PERSK  Employee Subgroup
    MOLGA  Country Grouping
    MOURA  Personnel Subarea Grouping for Leave Types
    TRFAR  Pay scale type
    TRFGB  Pay Scale Area
    TRFGR  Pay Scale Group
    TRFST  Pay Scale Level
    SCHKZ  Work Schedule Rule
    PERNR  Personnel Number
    ANSVH  Work Contract
    CTTYP  Contract type
    Hope this helps,
    Regards,
    Shree

Maybe you are looking for