Create Planning Application for the first time without using workspace

hi,all:
I come across a problem:The Hyperion Planning Application isn't configured into the workspace,but i have to create a Hyperion Planning Application for the first time.So, have any other methods to solve this problem? Can I use other tools or something to create it?
thanks very much

yellow wrote:
Hi,John,Thanks for your quick reply.
I think after install Hyperion Planning,at first time can't create application in this address:http://localhost:8300/HyperionPlanning/ ,usually create it in workspace.
Is the address you said different from http://localhost:8300/HyperionPlanning/?
thanksI gave you the address to create a planning application directly - http://localhost:8300/HyperionPlanning/AppWizard.jsp
Notice the AppWizard.jsp on the end.
If it version 11 you will be able to create your datasource from that location, if it is version 9 then you will have to create a datasource first from the configuration utility.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

"You are opening the application----- for the first time" error

I've seen a few people post about this from as far back as 2005 but I haven't found anything that worked for me. I believe I started having this problem after upgrading to Snow Leopard.
When opening an application, most often Microsoft Office by opening a specific document/file, I get the warning that I'm opening the application for the first time. This is mostly an annoyance but I don't know how to get this error to stop coming up. I saw a suggestion to delete caches and make sure the application was set as default for that file type; these haven't solved the problem yet.
Thanks!!

Thanks for the reply, unfortunately I'm not sure it helped. I did recently trash a couple caches, but this was after the problem had started. I found an old post that suggested the cache might be corrupted and that it would be a good idea to trash it.
The link you posted notes that the deleted cache could cause that problem, but I would think a new cache would be created and it would be resolved. Is it possible I have a setting that's erasing it? How would I change that? It also sounds like in the link you posted that theMacMac's problem eventually went away without explanation.

Known Issue while running Adobe Story desktop application for the first time on Mac OS 10.8

You may encounter the following error message while running the Adobe Story desktop application for the first time on Mac OS 10.8:
For resolution, please go to:
http://helpx.adobe.com/story/kb/run-story-app-mac-os.html

The /Developer directory contains the compiler(s) and various tools and libraries.
Does your user account name really contain a single quote? If so, it looks like the quote is getting eaten by one of the build scripts, which is resulting in a file path that doesn't exist.

Error occured while creating site collection for the first time in SP2013

While creating a new site collection in SharePoint 2013, I need to do atleast 4 times " Go back to Site" begore it appears properly. Could you please let me know why this error is occuering while we create site collection for the first time.
Is it aknown issue or due to RAM contraints.I am using 16 GB of RAM in Web tier.

You can get by with 16 GB of RAM so I am guessing that is not the cause. Although, you could verify your memory utilization during the process. As long as you don't exceed 95% you should be fine. Next time, I would instead look up the
error in the ULS logs using the correlation id and see if you can get more details of what is causing the error.
Corey Roth - SharePoint Server MVP blog:
www.dotnetmafia.com twitter: @coreyroth |
SP2 Apps

IPad 2 starting for the first time without itunes ?

Hello everyone,
I just bought an iPad 2 for my brother in India. :-). A brand new iPad 2 in a white box from best buy. I have couple of questions and hope the forum members would help. Thank you.
1. As i unboxed , i pressed the Home button, and the iPad screen didn't show the connect to itunes logo,instead led me thru' a series of steps like registering for itunes/apple password and it just started on its own. It works fine though ,however i found this to be weird to start without connecting to itunes. Is this considered "normal" for recent iPad 2's to start without itunes ?.
2. What kind of travel adapter would you suggest for use in India /240V ?. I was suggested to purchase a world adapter kit from apple store for $39.00 ,but i would use only one adapter and the rest wouldn't be of any use ? Could you suggest an adapter to use in India ?

Sunnyr wrote:
Thank you. My question is about starting iPad 2 for the first time without connecting to iTunes ?
As of iOS 5, it is quite feasible to start up, configure and use an iPad without connecting to iTunes. My New IPad has NEVER been synched to a computer.

I tried to use the iPhone hot spot feature for the first time to use my kindle outside. I followed the directions n I saw the network came up I used my password and I could not connect. What am I'm doing wrong. Please help

I tried to use the iPhone hot spot feature for the first time to use my kindle outside. I followed the directions n I saw the network came up I used my password and I could not connect. What am I'm doing wrong. Please help

I tried to use the iPhone hot spot feature for the first time to use my kindle outside. I followed the directions n I saw the network came up I used my password and I could not connect. What am I'm doing wrong. Please help

I have a Macbook pro that I bought in 2008. I recently installed Maverick. For the first time, I used headphones. Now I cannot get sound without them.

I have a Macbook Pro that I bought in 2008. A few months ago I installed OS 10.9.1. A couple of days ago I used headphones for the first time ever. Now I cannot get sound without them. Help?

Hi, lolabev.
You may find the troubleshooting steps in the article below helpful.
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
Cheers,
Jason H.

Sync my iphone calendar with MobileMe for the first time without deleting?

I never used iCal, I only us the calendar on my iphone to remember appointments. Now I just got MobileMe and I want my iphone calendar to sync with mobileme (obviously for the first time). But when I turn on MobileMe calendar sync on my iPhone, I get the message that if I save that setting, all my events will be deleted from my phone!
How can I start using MobileMe on my phone without losing all my events/appointments??
And what's the logic behind this behavior? I don't get it.

childlost,
This is the expected behavior. When MobileMe Push is enabled on the iPhone, it replaces the existing information with what it finds on me.com.
I'd recommend following this guide for the initial setup: http://www.apple.com/mobileme/setup/iphone/mac.html
Hope this helps,
Raleigh

Can I sync my 'PC Free' activated iPhone with downloaded apps to iTunes for the first time without loosing data?

I have an iPhone 4 that has been activated over the air, "PC Free" and have used it for a month without ever connecting it to a computer. I have downloaded several apps, taken a few pictures, and even downloaded a few songs. Now I want to connect to my computer and sync and backup. Will I loose all my data?

Before you connect to a new PC, make sure that autosync is disabled in Edit/Preferences/Devices, otherwise her phone will be wiped during the following sync.
If she has data on the phone she wants to save, back up manually:
Disable autosync in iTunes, connect your phone to her new computer and right click on it in the device list and choose backup. iTunes will backup your phone without syncing. Transfer the purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the phone for the first time.
About backups and what's saved:http://support.apple.com/kb/HT1766
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Transferring data is also covered here: http://support.apple.com/kb/HT4137

Opening application for the first time warning keeps coming

I've installed VLC player and amongst other media files set mp4 to automatically open with it. When I double click a mp4 file it asked 'You are opening the application 'VLC Player' for the first time' etc. Pressed ok. After that it didn't ask that any more.
However, every time I reboot my Mac and double click a mp4 file again, I keep getting that 'You are opening the application 'VLC Player' for the first time' warning popup again the first time I want to open a media file. Then it's gone again, until I reboot my Mac again.
Every time I reboot and want to play a media file I always get that 'first time' popup. It only happens with VLC Player. I've uninstalled it completely and reinstalled it again, but that 'first time' popup for VLC Player keeps coming every time I reboot and upon the first time I open a media file.
How can I fix that?

Did you copy VLC to Applications folder? When you download VLC, you get it in a DMG file, that you have to open, and here's VLC. However, you don't have to copy the VLC copy you find in it, but you have to drag the VLC icon to the Applications icon:
Then, drag the VLC DMG file you find in the Desktop, drag it to Trash and delete the VLC installer from Downloads folder. Finally, open VLC from Applications folder

Error: Accessing the Reader Extensions Server web application for the first time

Hi,
I've followed the the installation guide line by line. Everything OK.
But when i access the Reader Extensions Server web application i see the following error:
An error has occured
Error 473: The credential permission settings could not be determined: 'com.adobe.document.pdf.CredentialLoginFailure: IDL:com/adobe/document/pdf/CredentialLoginFailure:1.0'.
Have you ever faced this kind of message before?
To tell you the truth i'm not very sure if my Rights Credential file is valid. But is this the cause of this message?
I use Form Server 6 and Reader Extensions 6 with a Websphere Application Server 6.0
Thanks in advance

Hi Stelios,
Yes, it seems to me also, as a bad certificate issue.
If memory serves, I run into this message once, where the certificate was valid. Anyway, Websphere v6 is not a supported app server. Have you tried installing on v5.1?
You might want to read this post, too:
matt cockburn, "Fix for LiveCycle Reader Extensions 7.0 install error" #, 6 May 2005 8:22 am
If you are located in Greece, we may be able to help you. You may contact me "ekokkoris at anodos.gr", should you wish.
Regards,
Evangelos

MacPro is unable to call to PC machine for the first time

I have the fllowing problem:
I have two computers One is MacPro machine and other is PC machine. I use Adobe Video Sample Application for Stratus Testing. When I launch the application for the first time on two machines and try to make a call from Mac to PC, nothing happens. PC doesn't receive any calling notification. However, when PC tries to make a call to MacPro machine, everything goes really well.
There is one exception:
MacPro machine can make a call to PC machine with the following condition
1 - PC has already made a call from PC to MacPro.
So, if PC has already made a call to MacPro, then after terminating the call (from anyside), MacPro can call PC and all goes well.
Can anybody please let me know why for the first time, MacPro is unable to call PC machine?
Thanks in advance.

Thanks for the reply. Let me elaborate the environment I have. I have a Wifi Network and the following three machines
MacPro (about which I have already discussed)
PC (about which I have already discussed)
Macbook
For your information, MacPro and Mac can easily talk with each other without any problem. Problem occurs when within the same WiFi network, MacPro tries to connect with PC.
I hope this will help you all a lot to guide me. Im also going to read the tutorial you have provided me.
Looking ahead from your side.
Thanks a lot again.

Multiple select list not retaining the value for the first time

Hi,
I have a 3 select list depends on each other. select_list1 -- > select_list2 --> multiselect3. I have use denes example to create them.
For the first time when I select values from 1,2,3 and runs a report based on it, it works fine but *does not retain the selected value in multiselect3.
for the second time submit the process, it retails value in multiselect3. Please tell me if you came across this issue before
Here is the code.
function get_select_list_xml_VL(pThis,pSelect,pSelect1,pSelect2){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
var l_Select1 = html_GetElement(pSelect1);
var l_Select2 = html_GetElement(pSelect2);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=Cascading_Select_List_VL',0);
get.add('F660_CASCADING_TEST',l_Select1.value + '_' + pThis.value + '_' + l_Select2.value);
alert(l_Select1.value + '_' + pThis.value + '_' + l_Select2.value);
// alert(document.getElementById("F660_CASCADING_TEST").value);
gReturn = get.get('XML');
if(gReturn && l_Select ){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue)
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);

Please ask any question if you dont understand about the problem.
Thanks

Crystal report from MSC taking long time for the first time

Hello Friends,
I have a report designed in Crystal Reports to display the BP details. It is giving some performance issues. In the analysis it is found that it is taking long time immediately after i restart the machine. From the next time it is not that worse.
If anybody is facing the same performance issue while using the crystal reports, kindly let me know the reasons for this. I would like to know the ways to increse the performance.
Thanks for all your support.
Best regards,
Swarna Seeta

Hello Swarna
Reporting is quiet a heavy component which interacts with many other dlls.
What happens when you say generate report from the mobile application for the first time, UI Framework knows that it is a reporting call and it will instantiate Reporting Manager. Reporting Manager is the single point of contact for the entire reporting functionality. During the initialization of reporting manager,
it needs to instantiate all other working components like Error Hanlder, Data handler, Resoure component and crystal reports etc..Resource component is a COM component and so there will be lot of Marshallign/Unmanrshalling from Dotnet calls. Since all these sub components are singleton classes, initialized only once for the first time and reuse the same instance in the subsequent attempts.
Hope I had made it bit clear
Best Regards
Shankar

HT1338 I use iCal for the first time. How do you update it without needing to update all programs of your computer?

I use ical for the first time, how do you update the programm without updating for 2 hours all other programms

From the iCal Help Menu in the Tool Bar...
Changing or deleting an event
You can change the time, day, alarm, or any other settings for any events you’ve created, or you can delete an event.
You can’t change the events on a calendar you’ve subscribed to (subscribed calendars appear in your Calendar list under the heading “Subscriptions”), and you can only change the calendar, status, and alarms for events you’ve been invited to.
To change or delete an event:
To change the time or day of an event you’ve created, drag the event to the new time or day in the main calendar view.
To change an event’s duration, drag the event’s top or bottom edge. (You can resize events only in Day or Week view.) If the event is an all-day event, in Week view, drag the left or right side of it.
To change the name of an event, double-click it. If necessary, click Edit to open the event editor. Select the event name, type a new name, and then click Done. (You can also change the name of an event without opening the event editor by holding down the Option key while you double-click the event name.)
To edit other characteristics of an event (for example, how often it repeats or whether it has an alarm), double-click the event. If necessary, click Edit to open the event editor. Make your changes.
To delete an event, select the event and press the Delete key on your keyboard.
If you’re changing an event to which you’ve invited other people, you need to send an updated event to the invitees by clicking Send in the event editor

Create Planning Application for the first time without using workspace

Similar Messages

Maybe you are looking for