Create PO XML files based on Vendor Data ...

hi,
i have an idoc ORDERS.ORDERS05 and will contain various vendors as a one of the values in the IDOC.
Based on the different vendors i have in the IDOC, XI has to create various xml packets and send it through HTTP via SOAP adapter.
Each vendor will have a unique URL where the xml can be posted.
Any steps or docs will be helpful.
Thanks,
Tirumal

Hi Tirumal,
First, you will need to configure a communication channel for each of the SOAP receivers.
Then, in Receiver Determination or Interface Determination, using the Condition Editor and XPath expression, you can examine the content of the IDoc and check for the vendor value. The Condition Editor will route the message to the specific Communication Channel, based on the value in the conditon.
Regards,
Bill

Similar Messages

How do I create individual xml files from the parsed data output of a xml file?

I have written a program (DOM Parser) that parses data from a XMl File. I would like to create an individual file with the corresponding name for each set of data parsed from the xml document. If the parsed output is Single, Double, Triple, I would like to create an individual xml file (Single.xml, Double.xml, Triple.xml)with those corresponding names. How do I create the xml files and give each file the name of my parsed data output? Thanks in advance for your help.
import java.io.IOException;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.parsers.ParserConfigurationException;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
import org.w3c.dom.Node;
import org.w3c.dom.NodeList;
import org.xml.sax.SAXException;
public class MyDomParser {
public static void main(String[] args) {
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
try {
DocumentBuilder builder = factory.newDocumentBuilder();
Document doc = builder.parse("ENtemplate.xml");
doc.normalize();
NodeList rootNodes = doc.getElementsByTagName("templates");
Node rootNode = rootNodes.item(0);
Element rootElement = (Element) rootNode;
NodeList templateList = rootElement.getElementsByTagName("template");
for(int i=0; i < templateList.getLength(); i++) {
Node theTemplate = templateList.item(i);
Element templateElement = (Element) theTemplate;
System.out.println("Template" + ": " +templateElement.getAttribute("name")+ ".xml");
} catch (ParserConfigurationException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (SAXException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();

Ive posted the new code but now I'm getting a FileAlreadyExistException error. How do I handle this exception error correctly in my code?
import java.io.IOException;
import java.nio.file.FileAlreadyExistsException;
import java.nio.file.Files;
import java.nio.file.Paths;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.parsers.ParserConfigurationException;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
import org.w3c.dom.Node;
import org.w3c.dom.NodeList;
import org.xml.sax.SAXException;
public class MyDomParser {
public static void main(String[] args) {
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
try {
DocumentBuilder builder = factory.newDocumentBuilder();
Document doc = builder.parse("ENtemplate.xml");
doc.normalize();
NodeList rootNodes = doc.getElementsByTagName("templates");
Node rootNode = rootNodes.item(0);
Element rootElement = (Element) rootNode;
NodeList templateList = rootElement.getElementsByTagName("template");
for(int i=0; i < templateList.getLength(); i++) {
Node theTemplate = templateList.item(i);
Element templateElement = (Element) theTemplate;
System.out.println(templateElement.getAttribute("name")+ ".xml");
for(int i=0; i < templateList.getLength(); i++) {
Node theTemplate = templateList.item(i);
Element templateElement = (Element) theTemplate;
String fileName = templateElement.getAttribute("name") + ".xml";
Files.createFile(Paths.get(fileName));
System.out.println("File" + ":" + fileName + ".xml created");
} catch (ParserConfigurationException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (SAXException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();

Generating structured XML file based on relational data base

Hi,
I need to use XML DB to generate a structured XML file based on the relational oracle database. I start by using Oracle default table, emp,
Here is EMP data,
EMPNO ENAME DEPNO SAL
123.00 E1 20.00 1,000.00
124.00 E2 20.00 2,000.00
125.00 E3 20.00 2,000.00
126.00 E4 30.00 3,000.00
127.00 E5 30.00 3,000.00
128.00 E6 30.00 4,000.00
129.00 E7 40.00 7,000.00
I used this SQL statement to generate an XML output,
select XMLElement ("Department",
XMLAttributes(deptno as "DEPARTMENTNO"),
XMLElement("EmployeeName", ename),
XMLElement("Salary", sal)
) "Result"
from
emp
where
deptno=20
The result was
<Department DEPARTMENTNO="20">
<EmployeeName>E1</EmployeeName>
<Salary>1000</Salary>
</Department>
<Department DEPARTMENTNO="20">
<EmployeeName>E2</EmployeeName>
<Salary>2000</Salary>
</Department>
<Department DEPARTMENTNO="20">
<EmployeeName>E3</EmployeeName>
<Salary>2000</Salary>
</Department>
but I need this structure instead,
<Department DEPARTMENTNO="20">
<EmployeeName>E1</EmployeeName>
<Salary>1000</Salary>
<EmployeeName>E2</EmployeeName>
<Salary>2000</Salary>
<EmployeeName>E3</EmployeeName>
<Salary>2000</Salary>
</Department>
Could you guide me how I can generate this kind of structure like master-detail structure and which document you recommend to obtain this point.
Thanks,
Shiva

Hi,
If you want to write an xml into file, I think you should use PL/SQL.
Is it even possible to spool output into file without the query itself?
doen't show me a proper xml fileTo get well-formed xml, you also have to make a root element.
If you want <?xml version="1.0"?> also then use xmlroot(), but I haven't figure out
how to specify the encoding.
SQL> WITH xtab AS(SELECT 'E1' ename,20 depno,1000 sal FROM dual
2               UNION ALL
3               SELECT 'E2',20,2000 FROM dual
4               UNION ALL
5               SELECT 'E3',40,3000 FROM dual
6               UNION ALL
7               SELECT 'E4',30,4000 FROM dual)
8 SELECT XMLRoot(XMLElement("Company",XMLAgg(XMLElement("Department",
9           XMLattributes(depno as "DEPARTMENTNO"),
10             XMLAgg(XMLForest(
11                      ename AS "EmployeeName",
12                      sal   AS "Salary"))))),version '1.0') company_xml
13 FROM xtab
14 GROUP BY depno;
COMPANY_XML
<?xml version="1.0"?>
<Company>
<Department DEPARTMENTNO="20">
    <EmployeeName>E1</EmployeeName>
    <Salary>1000</Salary>
    <EmployeeName>E2</EmployeeName>
    <Salary>2000</Salary>
</Department>
<Department DEPARTMENTNO="30">
    <EmployeeName>E4</EmployeeName>
    <Salary>4000</Salary>
</Department>
<Department DEPARTMENTNO="40">
    <EmployeeName>E3</EmployeeName>
    <Salary>3000</Salary>
</Department>
</Company>
[pre]

Problem converting data in XML file to internal table data

Hi all,
I have a requirement. I need to convert an XML file to internal table data and based on that data do Goods Receipt in SAP.
With the help of this blog /people/r.eijpe/blog/2005/11/10/xml-dom-processing-in-abap-part-i--convert-an-abap-table-into-xml-file-using-sap-dom-approach
I am able to convert the XML file to data in SAP. But this blog will display the output on screen as ELELEMNT = nodename VALUE= value of that node.
But I donu2019t want in that way, I want to store all the data in XML file in an internal table so that I can make use of those values and do Goods Recipt in SAP.
Can some one suggest how should I read the data in an internal table.
Here is my code..what changes should I make?
*& Report z_xit_xml_check
REPORT z_xit_xml_check.
TYPE-POOLS: ixml.
TYPES: BEGIN OF t_xml_line,
          data(256) TYPE x,
        END OF t_xml_line.
DATA: l_ixml            TYPE REF TO if_ixml,
        l_streamfactory   TYPE REF TO if_ixml_stream_factory,
        l_parser          TYPE REF TO if_ixml_parser,
        l_istream         TYPE REF TO if_ixml_istream,
        l_document        TYPE REF TO if_ixml_document,
        l_node            TYPE REF TO if_ixml_node,
        l_xmldata         TYPE string.
DATA: l_elem            TYPE REF TO if_ixml_element,
        l_root_node       TYPE REF TO if_ixml_node,
        l_next_node       TYPE REF TO if_ixml_node,
        l_name            TYPE string,
        l_iterator        TYPE REF TO if_ixml_node_iterator.
DATA: l_xml_table       TYPE TABLE OF t_xml_line,
        l_xml_line        TYPE t_xml_line,
        l_xml_table_size TYPE i.
DATA: l_filename        TYPE string.
PARAMETERS: pa_file TYPE char1024 DEFAULT 'c:\temp\orders_dtd.xml'.
Validation of XML file: Only DTD included in xml document is supported
PARAMETERS: pa_val TYPE char1 AS CHECKBOX.
START-OF-SELECTION.
Creating the main iXML factory
    l_ixml = cl_ixml=>create( ).
Creating a stream factory
    l_streamfactory = l_ixml->create_stream_factory( ).
    PERFORM get_xml_table CHANGING l_xml_table_size l_xml_table.
wrap the table containing the file into a stream
    l_istream = l_streamfactory->create_istream_itable( table = l_xml_table
                                                    size = l_xml_table_size ).
Creating a document
    l_document = l_ixml->create_document( ).
Create a Parser
    l_parser = l_ixml->create_parser( stream_factory = l_streamfactory
                                      istream        = l_istream
                                      document       = l_document ).
Validate a document
    IF pa_val EQ 'X'.
      l_parser->set_validating( mode = if_ixml_parser=>co_validate ).
    ENDIF.
Parse the stream
    IF l_parser->parse( ) NE 0.
      IF l_parser->num_errors( ) NE 0.
        DATA: parseerror TYPE REF TO if_ixml_parse_error,
              str        TYPE string,
              i          TYPE i,
              count      TYPE i,
              index      TYPE i.
        count = l_parser->num_errors( ).
        WRITE: count, ' parse errors have occured:'.
        index = 0.
        WHILE index < count.
          parseerror = l_parser->get_error( index = index ).
          i = parseerror->get_line( ).
          WRITE: 'line: ', i.
          i = parseerror->get_column( ).
          WRITE: 'column: ', i.
          str = parseerror->get_reason( ).
          WRITE: str.
          index = index + 1.
        ENDWHILE.
      ENDIF.
    ENDIF.
Process the document
    IF l_parser->is_dom_generating( ) EQ 'X'.
      PERFORM process_dom USING l_document.
    ENDIF.
*&      Form get_xml_table
FORM get_xml_table CHANGING l_xml_table_size TYPE i
                              l_xml_table      TYPE STANDARD TABLE.
Local variable declaration
    DATA: l_len      TYPE i,
          l_len2     TYPE i,
          l_tab      TYPE tsfixml,
          l_content TYPE string,
          l_str1     TYPE string,
          c_conv     TYPE REF TO cl_abap_conv_in_ce,
          l_itab     TYPE TABLE OF string.
    l_filename = pa_file.
upload a file from the client's workstation
    CALL METHOD cl_gui_frontend_services=>gui_upload
      EXPORTING
        filename   = l_filename
        filetype   = 'BIN'
      IMPORTING
        filelength = l_xml_table_size
      CHANGING
        data_tab   = l_xml_table
      EXCEPTIONS
        OTHERS     = 19.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
Writing the XML document to the screen
    CLEAR l_str1.
    LOOP AT l_xml_table INTO l_xml_line.
      c_conv = cl_abap_conv_in_ce=>create( input = l_xml_line-data replacement = space ).
      c_conv->read( IMPORTING data = l_content len = l_len ).
      CONCATENATE l_str1 l_content INTO l_str1.
    ENDLOOP.
    l_str1 = l_str1+0(l_xml_table_size).
    SPLIT l_str1 AT cl_abap_char_utilities=>cr_lf INTO TABLE l_itab.
    WRITE: /.
    WRITE: /' XML File'.
    WRITE: /.
    LOOP AT l_itab INTO l_str1.
      REPLACE ALL OCCURRENCES OF cl_abap_char_utilities=>horizontal_tab IN
        l_str1 WITH space.
      WRITE: / l_str1.
    ENDLOOP.
    WRITE: /.
ENDFORM.                    "get_xml_table
*&      Form process_dom
FORM process_dom USING document TYPE REF TO if_ixml_document.
    DATA: node      TYPE REF TO if_ixml_node,
          iterator TYPE REF TO if_ixml_node_iterator,
          nodemap   TYPE REF TO if_ixml_named_node_map,
          attr      TYPE REF TO if_ixml_node,
          name      TYPE string,
          prefix    TYPE string,
          value     TYPE string,
          indent    TYPE i,
          count     TYPE i,
          index     TYPE i.
    node ?= document.
    CHECK NOT node IS INITIAL.
    ULINE.
    WRITE: /.
    WRITE: /' DOM-TREE'.
    WRITE: /.
    IF node IS INITIAL. EXIT. ENDIF.
create a node iterator
    iterator = node->create_iterator( ).
get current node
    node = iterator->get_next( ).
loop over all nodes
    WHILE NOT node IS INITIAL.
      indent = node->get_height( ) * 2.
      indent = indent + 20.
      CASE node->get_type( ).
        WHEN if_ixml_node=>co_node_element.
        element node
          name    = node->get_name( ).
          nodemap = node->get_attributes( ).
          WRITE: / 'ELEMENT :'.
          WRITE: AT indent name COLOR COL_POSITIVE INVERSE.
          IF NOT nodemap IS INITIAL.
          attributes
            count = nodemap->get_length( ).
            DO count TIMES.
              index = sy-index - 1.
              attr   = nodemap->get_item( index ).
              name   = attr->get_name( ).
              prefix = attr->get_namespace_prefix( ).
              value = attr->get_value( ).
              WRITE: / 'ATTRIBUTE:'.
              WRITE: AT indent name COLOR COL_HEADING INVERSE, '=',
                               value COLOR COL_TOTAL   INVERSE.
            ENDDO.
          ENDIF.
        WHEN if_ixml_node=>co_node_text OR
             if_ixml_node=>co_node_cdata_section.
        text node
          value = node->get_value( ).
          WRITE: / 'VALUE     :'.
          WRITE: AT indent value COLOR COL_GROUP INVERSE.
      ENDCASE.
    advance to next node
      node = iterator->get_next( ).
    ENDWHILE.
ENDFORM.                    "process_dom
Any help would be highly apperciated.
regards,
Jessica Sam

Pavel Vera,
With your example i tries doing the following .....
I tried to convert the data of XML file to internal table data. I am collecting the data in internal table to do goos recipt with that data.
Please find my XML file, ABAP pgm and XSLT pgm . I donu2019t know what I am missing I am not getting any output. I donu2019t know what is wrong please help me with this
Below is my XML file, My code and XSLT Program. In the below XML file I need to collect Vendor Number, Order Number, and Date tags which occur only once for one XML file.
I also need to collect the following tags from <Shipmentdetail>
<Shipmentdetail> has following child nodes and I need to collect them
TrackingNumber
Freight
Weight
ShipmentDate
ShipmentMethod
Need to collect to collect the following tags from <ProductInformation>
<ProductInformation> has following child nodes and I need to collect them
    LineNumber
    SKUNumber
    OrderedQuantity
    ShippedQuantity
    UOM
The <Shipmentdetail> and <ProductInformation> are child nodes of <OrderShipment>
The <Shipmentdetail> occurs only ones but the <ProductInformation> can occur once or many times and will be dynamic and differs depening on the input file.
My XML file is as follows
<?xml version="1.0" encoding="iso-8859-1" ?>
- <ShipmentHeader>
<AccountID />
- <OrderShipment>
      <VendorNumber>1000</VendorNumber>
      <OrderNumber>P00009238</OrderNumber>
      <OrderType>Stock</OrderType>
      <Company />
      <Division />
     <Department />
     <Date>20061120</Date>
     <CartonCount>2</CartonCount>
     <ShipAllProducts>No</ShipAllProducts>
-             <ShipmentDetail>
                  <TrackingNumber>1ZR3W891PG47477811</TrackingNumber>
                  <Freight>000000010000</Freight>
                  <ShipmentDate>20061120</ShipmentDate>
                  <ShipmentMethod>UPS1PS</ShipmentMethod>
             </ShipmentDetail>
-            <ProductInformation>
                 <LineNumber>000000001</LineNumber>
                 <SKUNumber>110FR</SKUNumber>
                 <AdvSKUNumber>003 4518</AdvSKUNumber>
                 <SKUID />
                 <OrderedQuantity>00000001000000</OrderedQuantity>
                 <ShippedQuantity>00000001000000</ShippedQuantity>
                 <UOM>EA</UOM>
                 <Factor>1</Factor>
            </ProductInformation>
-           <ProductInformation>
                <LineNumber>000000002</LineNumber>
                <SKUNumber>938EN</SKUNumber>
                <AdvSKUNumber>001 7294</AdvSKUNumber>
                <SKUID />
                <OrderedQuantity>00000000450000</OrderedQuantity>
                <ShippedQuantity>00000000450000</ShippedQuantity>
                <UOM>EA</UOM>
                <Factor>1</Factor>
            </ProductInformation>
-           <CaseInformation>
               <LineNumber>000000001</LineNumber>
               <SKUNumber>110FR</SKUNumber>
               <AdvSKUNumber>003 4518</AdvSKUNumber>
               <SKUID />
               <SSCCNumber>00000001668000002487</SSCCNumber>
               <CaseQuantity>00000001000000</CaseQuantity>
               <UOM>EA</UOM>
               <Factor>1</Factor>
             </CaseInformation>
             <CaseInformation>
               <LineNumber>000000001</LineNumber>
               <SKUNumber>110FR</SKUNumber>
               <AdvSKUNumber>003 4518</AdvSKUNumber>
               <SKUID />
               <SSCCNumber>00000001668000002487</SSCCNumber>
               <CaseQuantity>00000001000000</CaseQuantity>
               <UOM>EA</UOM>
               <Factor>1</Factor>
             </CaseInformation>
- </OrderShipment>
</ShipmentHeader>
My Program
TYPE-POOLS abap.
CONSTANTS gs_file TYPE string VALUE 'C:\temp\test.xml'.
* This is the structure for the data from the XML file
TYPES: BEGIN OF ts_shipment,
         VendorNumber(10)     TYPE n,
         OrderNumber(20)      TYPE n,
         OrderType(8)         TYPE c,
         Date(8)              TYPE c,
       END OF ts_shipment.
TYPES: BEGIN OF ts_shipmentdetail,
         TrackingNumber(30)     TYPE n,
         Freight(12)            TYPE n,
         Weight(14)             TYPE n,
         ShipmentDate(8)        TYPE c,
         ShipmentMethod(8)      TYPE c,
         END OF ts_shipmentdetail.
TYPES: BEGIN OF ts_productinformation,
         LineNumber(9)          TYPE n,
         SKUNumber(20)          TYPE c,
         OrderedQuantity(14)    TYPE n,
         ShippedQuantity(14)    TYPE n,
         UOM(4)                 TYPE c,
         END OF ts_productinformation.
* Table for the XML content
DATA: gt_itab       TYPE STANDARD TABLE OF char2048.
* Table and work ares for the data from the XML file
DATA: gt_shipment               TYPE STANDARD TABLE OF ts_shipment,
      gs_shipment               TYPE ts_shipment.
DATA: gt_shipmentdetail         TYPE STANDARD TABLE OF ts_shipmentdetail,
      gs_shipmentdetail         TYPE ts_shipmentdetail.
DATA: gt_productinformation     TYPE STANDARD TABLE OF ts_productinformation,
      gs_productinformation     TYPE ts_productinformation.
* Result table that contains references
* of the internal tables to be filled
DATA: gt_result_xml TYPE abap_trans_resbind_tab,
      gs_result_xml TYPE abap_trans_resbind.
* For error handling
DATA: gs_rif_ex     TYPE REF TO cx_root,
      gs_var_text   TYPE string.
* Get the XML file from your client
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
    filename                = gs_file
CHANGING
    data_tab                = gt_itab
EXCEPTIONS
    file_open_error         = 1
    file_read_error         = 2
    no_batch                = 3
    gui_refuse_filetransfer = 4
    invalid_type            = 5
    no_authority            = 6
    unknown_error           = 7
    bad_data_format         = 8
    header_not_allowed      = 9
    separator_not_allowed   = 10
    header_too_long         = 11
    unknown_dp_error        = 12
    access_denied           = 13
    dp_out_of_memory        = 14
    disk_full               = 15
    dp_timeout              = 16
    not_supported_by_gui    = 17
    error_no_gui            = 18
    OTHERS                  = 19.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "ISHIPMENT".
GET REFERENCE OF gt_shipment INTO gs_result_xml-value.
gs_result_xml-name = 'ISHIPMENT'.
APPEND gs_result_xml TO gt_result_xml.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "ISHIPDET".
GET REFERENCE OF gt_shipmentdetail INTO gs_result_xml-value.
gs_result_xml-name = 'ISHIPDET'.
APPEND gs_result_xml TO gt_result_xml.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "IPRODDET".
GET REFERENCE OF gt_productinformation INTO gs_result_xml-value.
gs_result_xml-name = 'IPRODDET'.
APPEND gs_result_xml TO gt_result_xml.
* Perform the XSLT stylesheet
TRY.
    CALL TRANSFORMATION z_xml_to_abap3
    SOURCE XML gt_itab
    RESULT (gt_result_xml).
CATCH cx_root INTO gs_rif_ex.
    gs_var_text = gs_rif_ex->get_text( ).
    MESSAGE gs_var_text TYPE 'E'.
ENDTRY.
* Writing the data from file for gt_shipment
*Collecting the Shipping Data from the XML file to internal table gt_shipment
*and writing the data to the screen
LOOP AT gt_shipment INTO gs_shipment.
WRITE: / 'VendorNumber:', gs_shipment-VendorNumber.
WRITE: / 'OrderNumber :', gs_shipment-OrderNumber.
WRITE: / 'OrderType :', gs_shipment-OrderType.
WRITE: / 'Date :',      gs_shipment-Date.
WRITE : /.
ENDLOOP. "gt_shipment.
LOOP AT gt_shipmentdetail INTO gs_shipmentdetail.
WRITE: / 'TrackingNumber:',     gs_shipmentdetail-TrackingNumber.
WRITE: / 'Freight :',           gs_shipmentdetail-Freight.
WRITE: / 'Weight :',           gs_shipmentdetail-Weight.
WRITE: / 'ShipmentDate :',     gs_shipmentdetail-ShipmentDate.
* WRITE: / 'ShipmentMethod :'    gs_shipmentdetail-ShipmentMethod
WRITE : /.
ENDLOOP. "gt_shipmentdetail.
LOOP AT gt_productinformation INTO gs_productinformation.
WRITE: / 'LineNumber:',         gs_productinformation-LineNumber.
WRITE: / 'SKUNumber :',         gs_productinformation-SKUNumber.
WRITE: / 'OrderedQuantity :', gs_productinformation-OrderedQuantity.
WRITE: / 'ShippedQuantity :', gs_productinformation-ShippedQuantity.
WRITE: / 'UOM :',              gs_productinformation-UOM.
WRITE : /.
ENDLOOP. "gt_productinformation.
XSLT Program
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output encoding="iso-8859-1" indent="yes" method="xml" version="1.0"/>
<xsl:strip-space elements="*"/>
<xsl:template match="/">
    <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
      <asx:values>
        <ISHIPMENT>
          <xsl:apply-templates select="//OrderShipment"/>
        </ISHIPMENT>
      </asx:values>
    </asx:abap>
</xsl:template>
<xsl:template match="OrderShipment">
    <item>
      <VENDORNUMBER>
        <xsl:value-of select="VendorNumber"/>
      </VENDORNUMBER>
      <ORDERNUMBER>
        <xsl:value-of select="OrderNumber"/>
      </ORDERNUMBER>
      <ORDERTYPE>
        <xsl:value-of select="OrderType"/>
      </ORDERTYPE>
      <DATE>
        <xsl:value-of select="Date"/>
      </DATE>
    </item>
</xsl:template>
<xsl:template match="/">
    <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
      <asx:values>
        <ISHIPDET>
          <xsl:apply-templates select="//OrderShipment/ShipmentDetail"/>
        </ISHIPDET>
      </asx:values>
    </asx:abap>
</xsl:template>
<xsl:template match="ShipmentDetail">
    <item>
      <TRACKINGNUMBER>
        <xsl:value-of select="TrackingNumber"/>
      </TRACKINGNUMBER>
      <FREIGHT>
        <xsl:value-of select="Freight"/>
      </FREIGHT>
      <SHIPMENTDATE>
        <xsl:value-of select="ShipmentDate"/>
      </SHIPMENTDATE>
      <SHIPMENTMETHOD>
        <xsl:value-of select="ShipmentMethod"/>
      </SHIPMENTMETHOD>
    </item>
</xsl:template>
</xsl:transform> .
Any help is highly appreciated. If anyone encountered this situation before please let me know where i am going wrong in my XSLT transformation.
Any Help will be highly apppreciated. Thanks in advance
Regards,
Jessica   Sam

Displaying XML content in the browser without creating the XML file

Hi,
In my web application, i am getting the data from the database and generating an XML file based on that. This file is created, read and its content is displayed in the browser when the user clicks a specific link on the jsp.
As per the new requirement, i am not supposed to generate the XML file. Instead when the user clicks on the specific link on the jsp, the XML should get displayed in the browser directly without generating the XML file.
Can someone plz help me in how to do this?
Moreover, this XML generation application should support multiple clients. Do i need to make my application thread-safe explicitly even though i am using a servlet to do this?
Please suggest
Thanx

Avoid multi post
http://forum.java.sun.com/thread.jspa?messageID=9858529

Creating an xml file from recordset

Hi...
XML newbie here - so.
Is it possible to create and xml file from a recordset?
I need to create a datafeed of our e-commerce products.
Also, some of the db data contains HTML Code (product
description field),
how will this effect the xml file?
Another problem is that my xml file needs to contain url's
for the products
and product images. My ASP pages contain these URL in hard
code and then
pull the actual file names from the db
Hope that makes some sense
Thanks for any help
Andy

Hi David
Thanks for your help.
I think it will have to be option 1 as i am using Access DB.
I don't know how to go about it but will serach good old
Google.
Here is my recordset below, that pulls the required data from
Access.
The product and product image URL's need to be in the xml
file but only the
product image name and product id are in the database, e.g
image name
(imagename.jpg) productid (21)
The actual URL's are hardcoded in my ASP pages, e.g <img
src="products/medium/<%=(RSDetails.Fields.Item("Image").Value)%>"
Not sure if this makes things any clearer :-|
Thanks Again
Andy
<%
Dim RSdatafeed
Dim RSdatafeed_numRows
Set RSdatafeed = Server.CreateObject("ADODB.Recordset")
RSdatafeed.ActiveConnection = MM_shoppingcart_STRING
RSdatafeed.Source = "SELECT Products.Product,
Products.Description,
Products.Image, Products.image2, Products.ListPrice,
Products.Price,
Products.xml_feed, Manufacturers.Manufacturer,
Shipping.ShippingCost FROM
Shipping, Products INNER JOIN Manufacturers ON
Products.ManufacturerID =
Manufacturers.ManufacturerID WHERE
(((Products.xml_feed)=No));"
RSdatafeed.CursorType = 0
RSdatafeed.CursorLocation = 2
RSdatafeed.LockType = 1
RSdatafeed.Open()
RSdatafeed_numRows = 0
%>
"DEPearson" <[email protected]> wrote in
message
news:[email protected]...
> Andy,
>
> There are two ways you can create a xml file from a
recordset
>
> 1. Is to code it using Server.CreateObject(XMLDOM)
> 2. If you are using SQL server 2005, just request the RS
returns as XML
> data. using FOR XML AUTO after the where cause ( the
best way with 2005
> and
> higher sql server)
>
> The db data containing HTML code should not effect your
xml file, unless
> it
> is bad markup. You could wrap the data with
<![CDATA[the data or html
> markup, or javascript]]>
>
> If the url is a recordset field, then it will return
with the xml data.
> If
> not you can create a storage procedure that will build
your URL from the
> data
> in the database.
>
> It is best to use storage procedure (SP )for security
reason when pulling
> data
> from a MS Sql server, make all calls to the database in
a SP. Also be sure
> to
> validate the values in the querystrings before accepting
them, check for
> hack
> code.
>
> David
>

Create a xml file from an internal table: CALL TRANSFORMATION

Hello gurus,
I want to create a xml file using data from scustom table. I will create an internal table and will select some records to it.
I searched the forum and i discovered the call transformation, but when i execute the example program at the CALL TRANSFORMATION shows a dump screen.
How we create a xml file from internal table??
Please help me. I will mark the useful answers.

I'm using if_ixml class to create xml documents
TYPES: BEGIN OF xml_line,
         data(256) TYPE x,
       END OF xml_line.
DATA: o_ixml          TYPE REF TO if_ixml,
      o_document      TYPE REF TO if_ixml_document,
      o_element       TYPE REF TO if_ixml_element,
      o_streamfactory TYPE REF TO if_ixml_stream_factory,
      o_ostream       TYPE REF TO if_ixml_ostream,
      o_renderer      TYPE REF TO if_ixml_renderer.
DATA: t_xml_table     TYPE TABLE OF xml_line,
      v_xml_size      TYPE i.
o_ixml = cl_ixml=>create( ).
o_document = o_ixml->create_document( ).
* The o_document have a set of methods to add elements, attributes, etc.
o_element = o_document->create_simple_element(
                  name = 'RootNode'
                  value = 'some text'
                  parent = o_document ).
o_streamfactory = o_ixml->create_stream_factory( ).
o_ostream = o_streamfactory->create_ostream_itable( table = t_xml_table ).
o_renderer = o_ixml->create_renderer( ostream = o_ostream document = o_document ).
o_renderer->render( ).
v_xml_size = o_ostream->get_num_written_raw( ).
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
    bin_filesize = v_xml_size
    filename     = 'C:a.xml'
    filetype     = 'BIN'
CHANGING
    data_tab     = t_xml_table.

How I can create a XML file from java Aplication

How I can create a XML file from java Aplication
whith have a the following structure
<users>
<user>
<login>anyName</login>
<password>xxxx</password>
</user>
</users>
the password label must be encripted
accept any suggestion

Let us assume you have all the data from the jsp form in an java bean object..
Now you want a xml file. This can be acheived in 2 ways
1. Write it into a file using java.io classes. Say you have a class with name
write("<name>"+obj.getName+</name>);
bingo you have a flat file with the xml
2. Use data binding to do the trick
will recommend JiBx and Castor for the 2nd option
Regards,
Rajagopal

Creating an xml file - urgent

hi !
i want to create an xml file frim hierarchical data (n depth) . please advise me how to create xml file using dom and how to write dom elements to disk...

read the documentation foor DOM it is not hard. You can create root elements, then append children to them, finally you can seralize the DOM Tree you just built

Creating an XML file using Java Standalone

Hi,
My problem is -
1) write a java stand alone retrieving data from database and put the data in XML format (i.e; we have to create an XML file).
How to do this? Could any one of you please suggest me how to code or can i have any links that refer the code snippets.
Thanks.

Could someone give me a link with information on how SAX is used to create an XML?
null

How to create an XML File for Gantt?

Hi Everybody.
I need a Gantt in Web Dynpro ABAP. I need it for the boss to do a Forecast for Vacation. I Hope this is understanding.
Did Anyone know how can i create a XML File for the Gantt at runtime?
Thanks
MSi

Hi Marcus,
the following link is to the JNet/JGantt developer doco
[JNet/JGantt Developer Documentation|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/lw/uuid/f010ec31-9658-2910-3c83-c6e62904eceb]
included in this is the:
[Schema for XML|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/lw/webdynpro/jnet_jgantt%20developer%20documentation/schema/xml-spy/jnet-schema.html]
You can use this to build XML to represent a gantt like chart.
I did this to build XML to represent employee avaliablity - although we fronted the gantt through WD Java not ABAP - the java applet called is the same (I believe).
Don't underestimate the work required to tweek your data into a decent layout. It took me days.
There may be tools/api to help generate the XML - I don't know of them - I'd look forward to seeing any other replies to this thread from people who have used/built any. An example of a class that generates JNet XML - CL_SPI_UI_JNET - but this does not seem to be a Gantt display.
Cheers,
Chris

Create an XML File in Application server

Hello,
I have a requirement to create an XML File as Local File and as server File. For the local File it works fine and i got a Local XML File.
My problem is for the Server File.I found a solution in internet to convert in binary.But i don't get in the server File created the XML structure.
Here is My code for the unix server File
DATA ex_tab TYPE TABLE OF x255.
data: wa_tab type x255.
data: lv_line(255) type c.
**-- carica tabella gt_file
   PERFORM CARICA_TAB_FILE.
   LOOP AT GT_FILE.
     MOVE-CORRESPONDING GT_FILE TO WA_SOURCE.
     APPEND WA_SOURCE TO GT_SOURCE.
     CLEAR WA_SOURCE.
   ENDLOOP.
* Perform the XSLT stylesheet
   TRY.
       CALL TRANSFORMATION ZMESMO052_XML
          SOURCE MATERIAL_DATA = GT_SOURCE[]
          RESULT XML XML_RESULT .
     CATCH CX_ROOT INTO GS_RIF_EX.
       GS_VAR_TEXT = GS_RIF_EX->GET_TEXT( ).
       MESSAGE GS_VAR_TEXT TYPE 'E'.
   ENDTRY.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
     EXPORTING
         buffer     = XML_RESULT
       TABLES
         binary_tab = ex_tab.
   CONCATENATE P_FILE '.xml' INTO P_FILE.
   CONDENSE P_FILE.
   TRANSLATE P_FILE TO LOWER CASE.
   OPEN DATASET P_FILE FOR OUTPUT IN BINARY MODE.
   IF SY-SUBRC NE 0.
     MESSAGE E000(ZF) WITH ' Error opening File' P_FILE.
   ENDIF.
   loop at ex_tab into wa_tab.
     move wa_tab to lv_line.
     transfer lv_line to p_file.
   endloop.
   close dataset p_file.
And i Got a file like this
Any solution please

I Found the solution,
DATA EX_TAB TYPE TABLE OF X255.
   DATA: WA_TAB TYPE X255.
   DATA: LV_LINE(255) TYPE C.
   DATA: L_CONVIN TYPE REF TO CL_ABAP_CONV_IN_CE.
   DATA: L_HTML TYPE STRING.
   DATA: L_VALUE TYPE STRING.
   DATA: L_MSGSTR TYPE STRING.
   DATA: FILENAME TYPE STRING.
**-- carica tabella gt_file
   PERFORM CARICA_TAB_FILE.
   LOOP AT GT_FILE.
     MOVE-CORRESPONDING GT_FILE TO WA_SOURCE.
     APPEND WA_SOURCE TO GT_SOURCE.
     CLEAR WA_SOURCE.
   ENDLOOP.
* Perform the XSLT stylesheet
   TRY.
       CALL TRANSFORMATION ZMESMO052_XML
          SOURCE MATERIAL_DATA = GT_SOURCE[]
          RESULT XML XML_RESULT .
     CATCH CX_ROOT INTO GS_RIF_EX.
       GS_VAR_TEXT = GS_RIF_EX->GET_TEXT( ).
       MESSAGE GS_VAR_TEXT TYPE 'E'.
   ENDTRY.
   TRY.
       CALL METHOD CL_ABAP_CONV_IN_CE=>CREATE
         EXPORTING
           ENCODING = 'UTF-8'
           INPUT    = XML_RESULT
         RECEIVING
           CONV     = L_CONVIN.
       CALL METHOD L_CONVIN->READ
         IMPORTING
           DATA = L_HTML.
     CATCH CX_ROOT.
       L_MSGSTR = 'Conversion error'.
   ENDTRY.
   SEARCH L_HTML FOR '><'.
   CLEAR L_VALUE.
   L_VALUE = CL_ABAP_CHAR_UTILITIES=>NEWLINE.
   CONCATENATE '>' L_VALUE '<' INTO L_VALUE.
   IF SY-SUBRC = 0.
     REPLACE ALL OCCURRENCES OF '><' IN L_HTML WITH L_VALUE IN
CHARACTER MODE.
   ENDIF.
   CONCATENATE P_FILE '.xml' INTO P_FILE.
   CONDENSE P_FILE.
   TRANSLATE P_FILE TO LOWER CASE.
   FILENAME = P_FILE.
   OPEN DATASET FILENAME FOR OUTPUT IN TEXT MODE ENCODING NON-UNICODE
WITH UNIX LINEFEED.
   TRANSFER L_HTML TO FILENAME.
   CLOSE DATASET FILENAME.

How do I modify invoice request xml file by adding posting date?

Hi,
We import customer invoice requests via xml files from an external data source. Currently the standard SAP xml file does not include the posting date, and invoices enter SAP with a blank posting date. When the invoice is released, the posting date is taken from the invoice date.
Due to our month end processes, we have hundreds of invoice requests every month where we do not want posting date to equal the invoice date, and for each of those invoices the posting date is manually entered one invoice at a time during the release process. This is very time consuming.
We would like to build functionality in our external system to create the posting date at the xml file generation stage. Could anyone let us know the following:
- what is the name of the posting date field on invoice requests (invoice documents)?
- where would we place the additional script in the xml file?
I'm attaching one of our current xml files (which already contains one section that has been customized)
Your suggestions would be appreciated.
Thanks,
Kerstin

Kerstin,
The closest i could find in the WSDL of the Manage Invoice Request Web Service that handles this integration is "<ProposedInvoiceDate>" or possibly even "<ProposedDeviatingPostingdate>", both of which sit directly under the <CustomerInvoiceRequest> element.
For more information, go to the Service Explorer, find the ManageInvoiceRequestsIn Web Service, download the WSDL, and open it in SOAP-UI or something similar. This way you can see all the fields that you can write to, which is where i found these two elements.

How to build a xml file dynamically with given data.

hi there
i need to create a writer that can create a xml with some given data. what is the procedure of creating a xml file? if it is possible, please post some samples, thank you.

I would reccomend JDOM, although it is not the only way(DOM is another), i have found it the easiest document model to work with. http://www.jdom.org
the code is as easy as:
Document doc = new Document();
Element root = new Element( "element-name" );
root.setAttribute( "id", "1234" );
doc.setRootElement( root );
etc etc

How to read XML file and update the data in MS CRM 2011?

Hi Folks,
Can anyone please help me finding some references to read XML files and push the data to MS CRM 2011 preferably by using a console application.
Please let me know if any ways of handling it in simple ways.
Thanks,
Sri

HI,
How to read XML file:
https://social.msdn.microsoft.com/Forums/en-US/5dd7261b-86c4-4ca8-ba87-95196ef3ba50/need-to-display-xml-file-in-textboxes-edit-the-data-and-save-the-new-xml-file?forum=csharpgeneral
How to work with CRM:
ClientCredentials credentials = new ClientCredentials();
credentials.Windows.ClientCredential = new System.Net.NetworkCredential("USER", "Password", "Domain");
Uri uri = new Uri("http://server/Organization/XRMServices/2011/Organization.svc");
OrganizationServiceProxy proxy = new OrganizationServiceProxy(uri, null, credentials, null);
proxy.ServiceConfiguration.CurrentServiceEndpoint.Behaviors.Add(new ProxyTypesBehavior());
IOrganizationService service = (IOrganizationService)proxy;
//using "service" you can create, update and retrieve entities.
More information here about service functions:
https://msdn.microsoft.com/en-us/library/gg328198.aspx

Create PO XML files based on Vendor Data ...

Similar Messages

Maybe you are looking for