Create Positions in ECC via Portal

Hi,
Currently we are assigning roles to positions in ECC and positions to employees to assign access in Portal (through our automated user provisioning process). Currently we assign roles to positions manually and we dont have any way to check if the correct roles are assigned to the positions in ECC.
What we would like to do is to enable this task via our Portal. So people can create position and assign roles to it in Portal itself and save it back to ECC. Is there any Business Package provides this kind of facility.
Let me know
Regards
Vaibhav

Similar Messages

Problem attempting to create a purchase order via SRM Portal instance.

Unsing SRM7.0 with PPS; When attempting to create a purchase order via the "Create Purchase
Order" button in SRM Portal instance, after select ECPO type; the following message is show in the screen: "Object or set with GUID 00000000000000000000000000000000 does not exist".
Could you please advise what the problem might be and what to do.Thanks, responds would be very appreciated.Kind regards.
Edited by: ital230 on Jun 30, 2010 10:37 AM
Edited by: ital230 on Jun 30, 2010 11:05 AM

Solve!
The problem was the attributes specialy the BSA.
chekout the attribute should be at highest level and in the user not excluded (grayed).
Also
Define Backend System for Product Category: check that the system for category transfer should be from srm to backend:

Accessing ECC system via portal

Hello,
We are in the process of implementing netweaver 2004s components for one of our client. In the landscape we have ECC6.0, BI 7.0 and XI 7.0. We are planning to use Enterprise Portal for the SSO activation. Presently the client is having windows active directory.
My question is if I need to integrate ECC6.0 with the EP for the SSO, is there any portal development effort is required?. How do we access the ECC from the portal. For each ECC tcode do we need to create any iviews? Kindly advice.
Regards
Sachin

Hi Sachin,
You can easily do that. Create you transaction iview using "Session_Manager" transaction. This transaction will bring the user on initial screen as he gets in ECC after logging. Due to this Iview he will be able to see the menu bar as in traditional ECC screen. So from there the user can navigate to other transactions as well for which the user is authorized.
You can create the transaction ivews from portal following these steps:
1) Logon to portal with Content Administrator Role.
2) Select Content Administration> Portal Content. On Right Side Select Portal Content.
3) Right Click Portal Content>new>iview. On right side select Iview Template out of three radio buttons. Click Next.
4) Select SAP Transaction Iview from the list of Iview Templates.
5) Provide Iview Name, ID properties.
6) Select SAP GUI Type say "SAP GUI for HTML" for HTML.
7) Here Select your System Alias name to which you want to connect, TCode need to be accessed. Click Next and then Finish.
If your system is successfully created and running then you will be able to preview the iview.
I hope the information provided will be very useful to you..
Regards,
Sumit

Calling a web dynpro application via portal using SSO

Hello Expert,
i have a requirement where i need to call a web dnpro application via portal.
But it is asking for user name and password.
i want to call using single sign on.
Can u please suggest a way.
i did the coding like this:-
CALL METHOD cl_wd_utilities=>construct_wd_url
EXPORTING
application_name = l_c_appl_name
IMPORTING
out_absolute_url = l_v_gv_url_string.
l_v_icf_url = l_c_icf_url_val.                      "#EC SYNTCHAR
CALL METHOD cl_icf_tree=>if_icf_tree~service_from_url
EXPORTING
url             = l_v_icf_url
hostnumber      = l_c_0
authority_check = space
IMPORTING
icfactive       = l_v_m_sso_active.
IF l_v_m_sso_active = l_c_x .
CREATE OBJECT o_viewer
EXPORTING
parent = o_empty_co.
CALL METHOD o_viewer->enable_sapsso
EXPORTING
enabled = l_c_x
EXCEPTIONS
OTHERS = 0.
l_v_gv_url_c = l_v_gv_url_string .
CONCATENATE l_v_gv_url_c l_c_url_string p0022-pernr INTO l_v_gv_url_c.
CALL METHOD o_viewer->detach_url_in_browser
EXPORTING
url        = l_v_gv_url_c
EXCEPTIONS
cntl_error = 1
OTHERS     = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
RAISING error_occured.
ENDIF.
cl_gui_cfw=>flush( ).
ENDIF.
but it is not working
thanks
Mahesh

Hi Mahesh,
You need to setup a Single Sign On between SAP Portal and ECC system where yoy are doing the development.
Ask basis team to setup the single sign on and usually this is the job done by Basis teams. Refer the below link to get some idea on SSO setup:
http://scn.sap.com/community/enterprise-portal/blog/2013/12/15/sso-configuration-between-sap-portal-73-and-ecc-60-ehp-6
Thanks
Krishna

Fetching data in R/3 via portal application(JSPDYNPage)

Hello Everyone,
I want to fetch data in R/3 server via portal application(JSPDYNPAGE) & display that data as an output of the portal application in TABLEVIEW format. Can anyone guide me on this (I:e-How to connect to R/3 server via portal component & fetch data & display the same). any similar application developed for a reference will be of great help.
Thanks,
Chetan

Hi Chetan,
I hope you know how to create a JSP Dyn Page, anyway I will explain it briefly.
Open NWDS->File->New->Create a portal application project->Specify the project name
right click on the project->New->Create a new portal application object->Portal component->Select JSP dyn page-(By default it creates class and all)->this is available under description on the right column-
Now goto the Java page->see the functions->attach zip and jar files(HTMLB plugin)
->Right click on the project->goto properties->Java build path->Add external jars->Select com.sap.portal.htmlbbridge.zip and htmlb.jar
This is how JSP page is created.
Now we want to do establish connection with R/3. That I will discuss in the next session.
Award points if this was helpful......
All the best for you
Regards,
Arun Jacob.

Collaboration with vendor via Portal?

Hi everyone :
   I meet a problem about collaboration with vendor. Our customer has lots of vendor ,and our customer expect that their vendor could query related R/3 report real-time via Portal on Internet .
   I had done the SSO between Portal and R/3, and the user who had Portal user and R/3 both could access R/3 via Portal easily. We can create user for vendor in Portal easily, but it is impossible that we create user for all of vendors in R/3 , because of R/3 user need to pay for license. So vendors could not query R/3 report via Portal now .
    My problem :
    1. Vendors can't query R/3 report via Portal now.
Is there anyone met this problem ever , and How to solve this problem ?
    2.On the assumption that our vendor can query R/3 report via Portal now, how can we control the authorization that certain vendor could query his data only, can't query other vendor's data ?
    Any advice and discuss is welcome!
Best Regards,
Jianguo Chen
Message was edited by: jianguo chen
Message was edited by: jianguo chen

Hi Brian
which datasource u r using?
i think u used read only LDAP + Databse
when u chang the password for user in portal than after corresponding user password in LDAP directory are not changed thas't why it's generated a message that
password expires and u can't change the password
so try to change the password in LDAP also.
hope it's helps u.
regards,
kaushal

Bapi call of create position

Dear All,
I'm working on a review of the SAP HR Portal we use, but I'm newbie to SAP. and need your expert's opinion on the following questions.
- Can I use some Bapi or RFC calls or some other tech from the JSP pages to create position SAP backend?
- If yes, what's the name of the calls in Bapi or RFC or other tech I should use?
- What experience exists for this in the market place today for posting to HR Module of R3 using BAPI's?
- What is the experience of posting in to SAP R/3 HR module from SAP Portal?
- What connection type can be used?
- What are the object types?
The versions that used in the current environment: Portal 6.0, KM 6.0.
Any help much appreciated.
Thanks.
Regards,
Anderson

Dear All,
I'm working on a review of the SAP HR Portal we use, but I'm newbie to SAP. and need your expert's opinion on the following questions.
- Can I use some Bapi or RFC calls or some other tech from the JSP pages to create position SAP backend?
- If yes, what's the name of the calls in Bapi or RFC or other tech I should use?
- What experience exists for this in the market place today for posting to HR Module of R3 using BAPI's?
- What is the experience of posting in to SAP R/3 HR module from SAP Portal?
- What connection type can be used?
- What are the object types?
The versions that used in the current environment: Portal 6.0, KM 6.0.
Any help much appreciated.
Thanks.
Regards,
Anderson

Backing up KM Folders via Portal Drive

Hi Experts,
We've implemented Netweaver Portal 7.0 with SP14 for a local company. Company migrated all shared folders from filesystem into KM via Portal Drive.
Portal is running on a VMWARE machine with Linux OS.
Followings are common questions, when we implement a Document Management SYstem on KM. I'm writing my answers but need help in Q2 esp.
Q1: How to backup files in KM?
A1: KM repostory is default DBFS mode ad all files within KM are stored in DB. So backing up DB means backing up KM thus all files.
Q2: How to backup/restore single/multiple files in KM in case of accidental deletion?
A2: In case of accidental deletion, with SP14 "Deleted Items" functionality given to KM and you can view and restore files deleted.
In case of permanent deletion, there is no option for KM file backup/restore other than DB.
Here we tried to simulate something following to backup files and restore in case of problem just like FileSystem document management:
On Backup Server, we installed Portal Drive and mapped the Portal KM Folders.
Then created a FileSystem backup on this mounted FS. But unable to backup in specific cases.
Not sure what is causing the problem, may be backup software, may be VMWARE architecture or may be linux or SAP portal for the last.
Here is the error code we get when we tried to backup KM Folders on a 32-bit windows 2003 server with Netbackup.
6/4/2008 2:14:53 PM - granted resource MediaID=@aaaae;Path=Z:\bck;MediaServer=bkcompany
6/4/2008 2:14:53 PM - granted resource test_disk
6/4/2008 2:14:53 PM - estimated 16 kbytes needed
6/4/2008 2:14:54 PM - started process bpbrm (88520)
6/4/2008 2:14:54 PM - connecting
6/4/2008 2:14:54 PM - connected; connect time: 00:00:00
6/4/2008 2:14:58 PM - begin writing
6/4/2008 2:15:05 PM - Error bpbrm(pid=88520) socket read failed, An existing connection was forcibly closed by the remote host. (10054)
6/4/2008 2:15:10 PM - Error bpbrm(pid=88520) could not send server status message
6/4/2008 2:15:10 PM - end writing; write time: 00:00:12
file read failed(13)
also the event log entry:
Faulting application bpbkar32.exe, version 6.5.2007.1115, faulting module bpbkar32.exe, version 6.5.2007.1115, fault address 0x00067581.
May be this specific case is encountered by any of you
Does anyone have any solution or sample implementation like above.

Hi
Have you tried ICE Offline scenario?
[How to distribute KM Content using ICE Protocol|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/802c1739-d270-2910-ad9f-f369de07c1bf]
Check the Offline scenario, not Online.
Regards
Aparnna

Conserving filename with upload via portal form into blob type

Hi
I have a little question. Is there any chance to conserve a filename, which was uploaded into blob column via portal form and then create link for this file with the same name?
null

Vlasta,
You certanly can save the original filename in your form, to do that you will need to add a FILENAME varchar2 column to your table and write a simple Javascript (search this forum for examples) to copy the fileselect value with onChange event. So, when you submit the form with your file the original name will be stored in you table.
Thanks,
Dmitry

Searching ifs via portal thru use of URL ?

I was recently told by my customer that someone from Oracle told
him you could create some sort of a URL inside portal to ifs
that would allow you to search ifs via portal.
I am not aware of anything like this. Can anyone out there shed
some light on this? Can this be done?
Thanks.

Hi Grigoria,
You can open a browser with the function module CALL_BROWSER. Giving the BSP URL, you will be able to call your BSP application from ABAP code.
Alternatively, you can embed your BSP application within SAPgui with an HTML control. Please check demo program CNHTTST1 for a code sample.
Best regards,
Tanguy

Unable to read Portlet Preferences set via Portal Admin

I have a portlet which should read the preference values set in the portal admin by an administrator.
I am running the portal as .portal and not in the streaming mode.
After setting the values in the portal administration I always click on propogate to all instances. But when I run the portal in workshop in debugger mode it is not reading the values as stored in Portal admin but it is showing the values which were stored while creating the portlet in workshop in portlet designer.
Please help how to make the portlet read the preference values stored via the portal admin console if the user visits the portal as an anonymous user. Any help is greatly appreciated on this subject. I have searched everywhere but have no solution.
I am using Weblogic Platform 8.1 sp5
Thanks
rj

The portlet preferences set in portal administration reflect only in streaming mode, since streaming mode uses the database that is used by portal administration. If you wish to see the portlet preferences set in portal adminstration, try running in streaming mode.
But when you run portal from workshop ( which would be file mode), it wouldn't pickup portlet preferences created via portal administration.
Note: The easiest way to distinguish a streaming mode from file mode is presence of 'appmanager' in URL.
eg: http://localhost:7001/sampleportal/appmanager/MyPortal/desktop1
Seenu.

Unable to create customers in ECC due to DEBITOR_BDCDATA

Hi Gurus,
We have a requirement to create customers in ECC (ECC 6.0 EhP4) from CRM (CRM 7.0 SP4) Business Partners. The issue is BDoc is failing with error"Fill in required fields". I am posting in this forum as my issue is on the inbound/posting side of process.
Analysis:
The data is getting posted via ALE where FM IDOC_INPUT_DEBITOR is called. On debugging I found that system is doing a BDC to transaction XD01 and the BDC screen sequence is generated by a function DEBITOR_BDCDATA. This function is not generating the screen data for mandatory address fields and hence this error.
On further analysis I found that system checks if you have central address management (BAS) active and if yes it skips that part of code which is responsible to generate screen sequence for address fields. This is due to that fact that system has already posted the address data and issued an address number before moving to FM DEBITOR_BDCDATA (ALE serialization where address should be posted before customer/vendor master data).
The serialization concept is fine to me however the issue is how do we generate the skipped address fields here to post the customer. I did find a BADI to implement custom screen data in internal table FT[] but I am not sure if I should use it as posting ECC customer is supposed to be a standard SAP behavior and there might be something I am missing here.
Has anyone tried this scenario before? Any ideas on this?
Thanks for looking into my thread.
Cheers,
Ankur

Hello Ankyur,
very briefly thinking, if your bdoc do fails because a required field is not populated, this is logically because the field is not populated !!
Do populate it and this will solves your issue.
Yes the bDoc integration do insert the address data prior the virtual DEBMAS idoc gets processed. And yes, this address integration does not check any required fields.
This will be done during DEBMAS integration.
I would not recommand that you implement BAdI CUSTOMER_ADD_DATA_BI for such purpose.
This should be solved eiither within CRM : CRM must ensure the data sent to ECC are correct and complete.
Or ECC, must have less fields mandatory.
In other words, both systems must have the same required fields
As an advise, do not implement DE_BALE event for such purpose, this will create more mess as this is integrated after address integration and before DEBMAS. It always results in errors...
Hope this helped
Alain

Material Created/changed in ECC needs to be updated in thirdparty system

Hi Gurus,
I have a requirement. Please help me on this.
We are having a legacy system (Material Master)which needs to be replaced by ECC 6.0 and data needs to be sent to third party system via middleware as PI.
we also needs to extend message type(Matmas not sure which one we need to consider 01,02,03,04) with additional legacy 10 fields according to the client requirement.
Whenever a material is created/changed in ECC idoc needs to be sent to middleware and then to the thirdparty via middleware.
Please let me know how we can handle this interface. Thanks much.
Regards,
Sanjay

HI Janagar,
I understand you are saying the solution in one word. It would be really helpful if you can expedite the solution as i am handling interfaces for the first time. Thanks much.
Regards,
Sanjeev

User changing position in ECC and impact on follow-on docs

Hello all,
Can any one tell me what will happen when a requestor creates a shopping cart and then moves to a different org node in org structure. The EBP users are built by distributing the positions and employees from the HR System.
for Eg:
1.USER1 is assigned to a org unit O 5000XXXX and creates some shopping carts
2. Now the user (USER1) is transferred/ assigned to different org unit O 5000YYYY
1. What will happen to documents in SRM (SC, CONF) that were created by the user
2. What will happen to the follow-on Docs in ECC(PR, PO, INV)
3. What will happen to approval items if the user is an Approver?
4. Whenever there is an update to the user position in ECC will it create a new BP in SRM?
i will award points and Appreciate your help.
Arpita

Hi Arpita,
This is how I see it working. Hope this helps.
1 - When User1 changes position. He is assigned to a different org. unit, l assume User2 would be taking over User1's responsibilities.
2 - This means all the open documents against User1 like shopping carts, purchase orders, confirmations, contracts now will be taken over by User2. There are business partners assigned to every business document. In this case the business partner needs to be replaced from User1 to User2 for the Open documents.
Regards,
RB

Position creation from HR Portal

Dear All,
I'm working on a review of the SAP HR Portal we use, but I'm newbie to SAP. and need your expert's opinion on the following questions.
Now the HR managers can submit some forms (probably made by JSP) on the current HR Portal such as Position Request form or Org. Unit Request form.
But the situation is that the forms don't go to the SAP after manager submit them, forms go to another department, and the guys there need to check any possible errors and input them manually into SAP. They said they are using ISR framework for this procedure. And this complex and time consuming procedure is not for a business reason, but a technical reason.
My questions is
Is there a limitation in SAP that the forms like Position Request form can't be submitted directly from the HR Portal to SAP?
If I'm going to make some improvement on this, can I use some Bapi or RFC calls or some other tech from the JSP pages on the HR Portal to make this kind of the submit to SAP backend?
The versions that used in the current environment: Portal 6.0, KM 6.0.
Any help much appreciated.
Thanks.
Regards,
Anderson

Positions can be created using HR portal once the manager submits change request form for create position same would be approved by the 1 up manager or as per the business process
workflow will update the R3 and in turn position will be created

Create Positions in ECC via Portal

Similar Messages

Maybe you are looking for