Create Print Layout Design Through SDK

Hello,
I want to ask is it possible to create Print Layout Design For Invoices through SDK .
Thanks,
Amit

Hi Amit,
It is not possible to get PLD through SDK. You can only use crystal reports if you want it thru SDK. More over, PLD is client specific. So if you design it in your system, then, you need to use Copy Express to push it to your client's (end user) system.
Regards,
Satish.

Similar Messages

Modify Financial Report (Profit & Loss) through Print Layout Designer

Hi all,
We try to modify the P&L Financial Report in SAP BO 2005B through the Print Layout Designer tool. We saved a new P&L Report with font size and font type modified and set this new report as default, but we noted that our modifications are only displayed in Report print preview instead printing this Report it seems like our modification are not performed.
Have you got any experience in this matter.
Thanks in advance.
Regards.
Albert

Hi Alberto,
We had also faced this problem. we are also using SAP 2005B.
For P&L Report, Hope u did changes in Profit and Loss Statement (System).
But, it is true that the system is not using the baove template for its print. Instead of that the system is using the template called "Profit and Loss statement Comparison".
When u give print preview u can understand this.i.e. the name of the template used will display in the title bar.
Hence, u do the changes in second said template. Hope u understood

Print Layout Designer or Crystal.....! What to do?

Dear All,
We need to link our User forms to Print layouts in order to make our reports work exactly the way SAP reports work. Is there a way to enable the print and print preview toolbar buttons and make them show our Report Layout? So far the response from SDK Forum is not encouraging and many questions regarding the same issue remain unanswered there.
After looking for the solution in the SDK Forums we came across these two replies from Mr. Nick He and Mr.Frank Moebius. Both are of the opinion that currently SAP does not offer a support for this feature and better use a third party tool. We are not in a position right now to opt for any third party tool but if we get a clear response from your side regarding this matter, we can go for it. Kindly have a look at the following links:
Re: Print Layout Design for user form in SapBusinessOne2005A(6.80.317) sp:01.?
Re: Add PLD Layouts in 2005 through sdk
The recommended solution within SAP B1 to develop Add-on reports is through User Queries and creating a Print Layout and run them via Query Manager Window. This approach in our view has the following drawbacks that make it less friendly with the end user:
1. Add-on forms appear in the left pane/menu, whereas reports would have to run through Query Manager only, which is in fact a small toolbar button on the top right side. We can add the Query Manager link to user menu but it doesnt solve the problem.
2. A user with full authorization over the Print Layout can accidentally overwrite it by clicking the Create Report Button, whereas in case of SAP Reports the Layouts remain unchanged and only saved as a new Layout and set as Default Layout for a report. Add-on Reports cannot do this.
3. Different behavior of Layouts in Query Manager on Single Click and Double Click. In the Query Manager, if a user just selects a query by a Single Click and views a Print Preview (Layout) then the custom user Layout appears. But if a user Double clicks a query then the Query Window appears, exposing the query and making it editable. Also the Preview(Layout) is different in this case. The user can either view the Window or Table Layout in this case. Hence this exercise would make the user confused and prone to errors.
4. The Parameter/Criteria window that is SAP generated is not enough to fulfill user friendly interface requirements. Is there a way to add List boxes or Combos to that form. The parameter selection Checkboxes also behave in a strange way that even the experts find difficult to manipulate. If they are of no use, whats the point in having them on the form in the first place.
All these points are leading us to confusion over the decision as to whether go for Query Based Reports or use Third Party tools. Kindly help us out in this regard. Your response would help us save some valuable time for our Add-on Development.

<<< If there is a solution then it has to be from SDK. We can only opt for third party components and frameworks only if any of the SAP representatives ensure us that the current version of SDK does not offer such support.>>>
The answer to that is to lodge your query as an Issue to SAP directly as a support question or go through your local SAP representative. If the functionality is not offered by SAP you can do a Development Request ( DRQ) and SAP will develop it if they think it will become userful.
<<<If this Forum is not meant to be answered by SAP representatives then kindly tell me any other Technical Support Portal from where i can get the answer directly. >>>
This forum is accessed mostly by SAP Business One Developers on SDK. However we are fortunate that some SAP employees who are very knowledgeble take some time off to answer queries.
Since it is a Forum, no one is obliged to answer. As indicated above , Try SAP directly if you need a definite answer.
<<<>>>
Since you mentioned Crystal: We as SAP Business One SDK developers, have come across similar issues and opted for a Inhouse developed Crystal Solution. It has been so popular we are selling it as a Generic add-on to B1.
Regards,
Indika.

Print layout design (PLD) - Incoming Payment

Hi All,
Under incoming payment, can i have the details in terms of line by line? Somehow rather, the design that was produced by the 'system', they details of my payment is gather together in one box. How can i have it to be line by line? It looks more nicer to be given to my customer as an official receipt.
Anyone has come across on this?
Need your experts urgently.
Thanks.
Harith

Hi Harith,
The requirment what you are asking is not possible through PLD but the format what you have asked is possible through Query Print Layout Design.
here you will create the Query which fetchs the required value the design the PLD for that in the Query Print Layout.
As we had faced similar situation we resolved it by using Query Print Layout Designer.
hope this helps you out.
Regards,
Shreyas

Print layout design - SAP Business one 2005 B

I am designing print layout for a sale invoice
in SAP Business one.
My question is
1. How to display excise information like
Excise duty rate,Excise duty Amount &
Education cess rate, Edu.Cess Amount
Sales tax rate,Sales tax Amount for a AR invoice
in print layout design?
I have found out respecive table & field, In this
case(AR Invoice),
Table name - INV4
Field Name - Tax Rate,Tax Amount
When i am connecting respective table & field
through database field in print layout design,
It is retreving only one row only.
For example (Below is database table)
Document key .......Tax Rate .....Tax Amount.......
1 2% Rs.20
1 16% Rs.100
1 4% Rs.40
Document key is Invoice #.
Tax rate - 2% & Tax Amount - Rs 20 only(ie) is
first row only.
In print layout i can't retreive &
display subsequent rows,
How to retrieve & display subsequent rows ?
Expecting your reply.
Yours,
A.Jeyakanthan

Dear Gordon - san,
Thanks for your reply,
If redo A/R Invoice then We loss a lot of time (Our A/R Invoice have about 500 rows).
Do you have other way to modify A/R Invoice and Link to Sales Order when created mistake.
I think the SAP B1 have Add-ons for this matter. But I do not kown.
What add -ons ?
Can you help me ?
Thanks

Print layout designer for develop report based on query

Dear Experts/Gurus,
I am amazing about the manage previous reconciliation report. When I opened it using print layout designer, it looks like the report is not built using query, but I am not sure yet. This is very confusing. I created query similar with manage previous reconciliation (MPR), but when I link the query to print layout and try to make similar format/appearance with MPR report (reconciliation management (system)), it is not success.
Isn't the MPR report built not based on query ? I appreciate your answer. TIA
Rgds,

Hi,
I am not sure I understand what's the problem:
Is it the layout that is different or the data?
Regarding the data you can use SQL Profiler (maybe you did?) to find out what queries are fired, but please note that there are some stored procedures in the DB that are used for some specific functions - not sure whether the "MPR" uses any of these.
Then you must include some non-default filter in SQL Profiler...
...but you can also use the logging functionality in B1 for that purpose:
Just activate the logging (see the "log" folder in the B1 subdirectory) in the corresponding config file: choose the option to have the SQLs logged in conjunction with the logging being triggered in all cases (not just error).
Thus you will get all the SQLs - just plain - from the B1 application, but note that it will obviously slow it down!
HTH,
Frank

Print layout design

hi friends,
using print layout design i am getting reports for a purchased item with all types of taxes included.
i want to display the total cost of same purchased items but more than one and each purchased items having different taxes included with it.
Example:
product1:
cost price:Rs100
tax:4%
total cost price:Rs104
Product1:
cost price:Rs100
tax:5%
total cost price:Rs105
i want to have final report as:
product1
total cost price:Rs209.
in 2005 .B version
so please help me out....
regards,
varalakshmi.

Hi,
If you want to create a base on tax rate, you can, First, goto to Sort and from the Sort properties, set/sort the Product to by ascending the do not check the summarize, then choose the Field where the tax is then check the Summarize then ok.
In you report proper, make a formula for the rate with Content : Concat(Field_rate) then put from the Group values as '1' then uncheck visible, then create a your report since the rate is not visible it will group according to rate and sort according to product.
regards,
Clint

Print Layout Designer \Custom Reports

Hello All,
Is there a way to set a custom report as default in the Print Layout Designer for A/R Invoice in SAP B1 ?
Thank you and Best wishes and Happiness in the New Year 2009.
Ben

Hello All,
Thank you for your answer but I would like to be more exact in my question because I already know how to set a Print Layout as default in a screen of SAP B1 like A/R Invoice by the way that Parlati has mentioned :
1. Open a blank AR Invoice (e.g. service or item type)
2. Click on Menu >> Tools >> Print Layout Designer... or pen icon on toolbar
3. With The Document Type selected - choose template and click on Set as Default
But I usually use the Query Manager Tool of SAP B1 to create new queries and reports and I use the Print Layout Designer to setup the layout of these reports. These reports are printed normally via the print preview Icon of the toolbar. But now I would like to know how can I set one of these Reports as default in A/R Invoice screen of SAP. Because it's a one of my customized Invoices.
Is there a way to do this?
Thank you.
Ben.

Print Layout Designer

Hi, I want to create one report for sales invoice using 'Print Layout Designer'.
1. Some fields like Price, Tax Amount are not picking up from Table, rather 'variable' is being used for them. So how to use these variables and on what basis variable number is defined????????
2. If I have defined one new taxcode(for example Insurance with rate 0.75), then how can I display the tax amount on report??????/

exactly,
then you can use query assistant to create a customized query
ciao

Print Layout Designer...........Help

Hi
Please help me to get a way to load the TIN number (already entered in - BusinessPartner master Data Form and saved in -CRD7 database table for customers) into the PLD Report as customers TIN number (means in the Report creation using Print Layout Designer). Here I want to access the CRD7 table in the PrintLayoutDesigner>Properties>Content-->Database.Is this Possible?

Dear
The workaround could be that creating UDF and FMS to get
those information , and thus in PLD.
Best Regards,
Xiaodan AN

Print Layout Designer for UDO

Hi,
Can we design report with print layout designer for UDO forms?
If yes, how do we accomplish this?
If not, is there any other alternative?
I am using 2004B. Thanks.

I use the iTextSharp project to create PDF's (http://itextsharp.sourceforge.net/)... its free and it works (A little hard to use, but it works). A more simple PDF-project are SharpPDF (http://sharppdf.sourceforge.net/). This is also free and very easy to use, but not that many features.

Print layout designer using Crystal report

Hi Dear;
how can i create a print layout in crystal report instead of print layout designer
is any conversion of should i created from scratch?
from where can i download the crystal report templates?
regards;

Hi,
There is no conversion tool between these two reports. You have to create them from scratch.
Check these threads to find out more:
Sample Crystal Reports
Re: SAP Business One and Crystal Reports
Thanks,
Gordon

Transaction Journal Report - Print Layout Design

Hi all
Is it possible to add Journal Entry Project Codes to this Transaction Journal Report (Print Layout Design)?
I tried to add Journal Entry Project Codes to this system PLD but the result still not showing any Project Code.
Kedalene

Hi Kedalene Chong
ou don't need a list of variables to use them. Simply go to View -> System Information so whenever you hover around a field with the cursor, in the left bottom corner of the screen you will see the details of that screen along with the variable number if it is a variable.
So you will see something like:
[Form=139 Item=29 Pane=0 Variable=91]
-> in this case the variable number is 91 - use it in Print Layout Designer.
So you can just use the variable specified in these details. When creating the print layout, just go back to your form, stand on a field with your mouse and you will see what variable to use.
Also Check with the PLD Variables Note No 867048...
Symptom
Using system variables when designing a print template for the General Ledger report.
Please note that variable numbers might change when upgrading to a higher version.
Cause
FAQ
Solution
Field Name
Variable Number
Posting Date
62
Due Date
63
Document Date
112
Series
140
Document Number
141
Transaction Number
65
Journal Voucher
66
Reference 1
67
Reference 2
68
Reference 3
69
Details
70
Transaction Code
71
Project Code
72
Costing Code
73
Offsetting Account
74
Indicator
137
Total (LC)
75
Debit (LC)
96
Credit (LC)
95
Balance (LC)
76
Total (SC)
77
Debit (SC)
98
Credit (SC)
97
Balance (SC)
78
Total (FC)
79
Debit (FC)
100
Credit (FC)
99
Balance (FC)
80
Creator
138
Internal Reconciliation
131
External Reconciliation
132
System variables from the Business Partner Master Data window available for use in the General Ledger report:
Phone
117
Fax
118
Contact Name
119
Address
120
Sales Employee
133
Remarks
134
Full Address
135
Hope Hepful
Regards
Kennedy

Ask Print Layout Designer for customize report

Dear all
I am newbie in SAP, and i must create report with PLD like :
PAYMENT TYPE          AMOUNT
By CASH
Cash               1000
Cash               2000
Cash               3000
Cash               4000
Total Cash          10000
By CREDIT
Credit               10000
Credit               15000
Credit               17500
Total Credit          42500
By TRANSFER
Transfer          20000
Transfer          25000
Total Transfer          45000
Total Payment          97500
From database example:
PAYMENT TYPE          AMOUNT
Cash               1000
Cash               2000
Credit               10000
Cash               3000
Cash               4000
Credit               15000
Transfer          20000
Credit               17500
Transfer          25000
Right Now,I just can create report like this :
PAYMENT TYPE          AMOUNT
Cash               1000
Cash               2000
Cash               3000
Cash               4000
Credit               10000
Credit               15000
Credit               17500
Transfer          20000
Transfer          25000
Total Payment          97500
Please help me.. because i very need it.
Thankyou so much for your help
Regards,
Dony
Edited by: dony donse on Dec 18, 2007 4:29 AM
Edited by: dony donse on Dec 18, 2007 4:38 AM

Finnaly...
someone send me PLD manual
And my problem solved
==============
Procedure
After defining the sort, perform the following steps
1. From the menu bar choose Print Layout Designer → Group.
2. Select a group number.
3. Select 1 for a sub-sort or sub-total for the primary sort, select 2 for the secondary sort and so on.
Each group is linked to its relevant row number in the Sort window described above. Thus, every field created in a certain group relates only to its group's corresponding row in the Sort window.
The Repetitive Area Header titles are now hidden as well as any field created in the Repetitive Area Footer. The reason is that these two areas are linked to groups. Each one of the groups has two areas of its own.
4. To define the sub-sort, do the following:
a. In the Repetitive Area Header assign a title for the required sort.
b. Create a new Formula field
c. Choose the Formula Editor button and select the operand SortValue() in the Operation field.
This action will print the Items table divided into separate titles each time the Item number changes.
5. To define sub-totals do the following:
a. In the Repetitive Area Footer create a Formula field.
b. Choose the Formula Editor pushbutton and select the operand ColSum(UniqueID as String) in the Operation field (for the Quantity field from the rows in the Sales Quotation).
The field within the brackets defines the column for which a total will be calculated. You can also calculate totals for the Price and Total columns.

Rounding up values in Print Layout Designer

The customer has a database field in print layout designer and this is bringing back a value such as 0.25. They would like to create another field which shows this value rounded up to the nearest whole number, ie in the case of 0.25 they would like to see 1.
They have created a formulae field and used the round function, however this rounds the value down to the nearest whole number as per the general rounding rule i.e. round it down if it is below .5 and up to the nearest whole number when it is above .5
Is there anyway to achieve this using Print Layout Designer in SAP Business One 2007 A?

Hi Samantha,
Apologies for the delay.
Yes, its possible to do this. Firstly, you will need to use the fields from my earlier post. However you will also need to add some more formula fields
The first formula field will work out what the numbers are to the right of the decimal point:
DecimalRight(Field_101)
Field_101 in your case will be the field ID for the quantity field and the field ID for the above formula field will be Field_102.
The second formula field will work out if the quantity is a whole number, here the field id will be Field_103:
Field_102==' '
The third formula field will work out if the quantity is not a whole number, here the field id will be Field_104:
Field_102!=' '
You can now use the Link To functionality to link the original quantity rounded field to Field_103 and you can link the quantity plus 0.5 rounded field to Field_104.
Kind regards,
Adrian

Create Print Layout Design Through SDK

Similar Messages

Maybe you are looking for