Create Production order

I am creating production ordrer by usinf bapi_prodord_create . It is succesfull when the material exist with compoents(sub material-BOM).
If BOM not exists how can i create procduction order ? which FM /BAPI ?
Note :This is the interface .Third party sending material ifo BOM so i have to pass to FM .

Hi Deva,
Check this link -
[https://forums.sdn.sap.com/click.jspa?searchID=32004809&messageID=8089454|Create Production Order without Material no.]
Hope it helps.
Regards,
Himanshu

Similar Messages

Update error while creating production order (TCODE CO01)

Hello,
We have created new plant into development server for testing. We have created production Order few days back at that time we have not faced any problem. But from last two days , when we create new production Order , system gives following error:
ORA-00947: not enough values
DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB
SAPLCOVB" or "LCOVBF10"
HEADER_POST"
and
Update was terminated
System ID....   DEV
Client.......   500
User.....   HPLSU
Transaction..   CO01
Update key...   4B6E4F48C08D027FE1008000C0A802F3
Generated....   08.02.2010, 10:35:48
Completed....   08.02.2010, 10:35:49
Error Info...   00 671: ABAP/4 processor: DBIF_RSQL_SQL_ERROR
Our work is held up.
Please also note that If we increase the QTY in the existing Order ( already created few days back) , System accept the same and Order is saved.
We are looking for the solution for the above.
Early reply will be highly appreciated.
thanks
harish

Hi Rishi,
You better check with your BASIS team.
Check this link also
Supervisor Error ADM0015
Regards,
Satyajit Kumar
Edited by: Satyajit Kumar on Feb 8, 2010 7:47 AM

Error while creating Production order without BOM

Hi Guys,
While creating production order without a BOM i am getting the following error in the error log.
Error: BOM for material xxxxxx does not contain any valid items
Message no. CO636
Kindly help.
Regards,
Sid

Dear customer,
could you check in the master data screen of the order if one BOM has been selected?
please coudl you check your customizing the following transactions:
OPJM
OPJI
what do you have in 'BOM slection field' MRP4 view of the header material?
Please check if with this info you can find the missing data to explode the BOM
regards
Maria

Error when creating Production Order

Dear All,
When i was trying to create Production Order using CO01, there was an error message that says "error when calculating cost, see log, log is deleted when saving"
what is the problem from that error message? how can i solve this problem?
best regard,
MARUFAT

Cost consist of material cost which are the direct cost, it is calculated from the component and the material itself for which the order is created. If the material is semifinished or finished check whether the accounting view for these material contains value. These material could be costed as per the method mentioned by our friend or you may enter value through MR21 (if the material is not costed atall since it is created). It is recommended to update cost through costing run and by CO member. Now if the material is Raw material you need to maintain PIR.
The second part could be the activity cost. These follows from the routing/receipe. Mostly the costing error is due to the inappropriate defination of either cost center or activity types. You need to confirm whether activity price are define for the period.
Appriciating you for taking a concern on the costing error and not overriding.

Error in creating Production order

When I create production order thorugh planned order Iam getting error message "No objects selected inside production order."

Hello,
The planned order that you may have use has been deleted already. It is most probably deleted during an MPS/MRP run. The planned order number is deleted and recreated with a different number. Please try to check in MD04 and check the planned orders there and you can convert it from there.
Thanks,
Ernesto

Can i create production order using process material ?

Dear All.
Please help me.
I want to create production order using process material (material type is PROC).
For may knowledge, process order is standard for the process material, but my customer want to use the PP module for the process material.
But I cant convert the planned order of precess material to production order in MD05.
The system message is "System does not support planned orders for process materials."
The followings are my test steps.
1. Master Creation
      - Material Master, BOM, ROUTING
In standard, process material (Material Type : PROC) need creation of master recipe. But due to my clients need (Using production order
           for the process material), I create the work center and ROUTING
2. DM Creation
      - In MD61, I create the planned independent requirement (Type : LSF)
3. Planned order creation for the process material using MRP
      - In MD01, I run the total MRP, the the planned order is created.
        It's order type is "LA"
4. Converting the planned order to Production Order
      - In this step, the system give the error "System does not support planned orders for process materials."
         and can not do anything.
I want to know that the above case is possible, and how.
Please Help meu2026..

Hi
First of if yur want to create production order or process order why do you go for material type :PROC.
you can create the same material as FERT & go ahead.
I do not understand the logic to select the material type as PROC.
Pl. go through SAP library where PROC is used.
Regards
YMREDDY

Usage of rounding profile in manual created production order

Hi,
We are making usage of various static rounding profiles.
For each of the materials produced, the rounding qty can be different, depending on the workcenters used to produce the materials (but for one material, there is only 1 rounding profile possible)
This works fine as long as we create planned orders via MRP runs (rounds up according the values set)
However, this rounding value is not taken into account (proposal, warning, error,..) when a user creates a planned order manually via MD11 or a production order via CO01.
Furthermore there is no warning message or whatever at the moment a user is converting a planned order (with a correct calculated rounded value) into a production order and manuaaly adapts the order qty.
As were are talking about a few 1000 different materials, the production planner cannot know all by heart and the rounding proposal would be excellent.
Anybody an idea how to implement this ?
Thanks and regards?

Hello again,
thanks for you prompt answer.
This would certainly solve our problem in case we would have always one and the same quantity to produce for a given material; but this is not always te case.
Perhaps it was not clearly explained in my first mail, but we would like to work with one (1) ROUNDING PROFILE per material.
Example, material A can be produced in multiples of 14; as such it should be possible for the production planner to create production orders for 14, 28, 42 , 56,..... pieces. When entering a order for eg. 25 pieces (= example the qty needed for a certain sales order), the system shpuld round to 28.
Other materials (having another rounding profile) are produced in multiples 3, im mulitples of 5,...
For this particular plant we have about 50 different rounding profiles in place.
So it somewhat logic that a production planner does not know all these by heart.
If you have a solution for this as well, please let me know.
Anyway already my thanks for feedback.
Regards.
Danny

Allocation error when I create production order

Hi guys:
I met allocation error when I created production order with CO01.could you help me out?urgent!

hi
What is the excatly the error so that we can tell u the reason
regards
ramakant

FM to Create Production Orders

Hi All,
My requirement is to create Production Orders with positions ( Components, Operations, and Documents ).
BAPI_PRODORD_CREATE creates Procduction Orders with header data and explodes the Material if it has a valid BOM.
In my requirement Material will not have any valid BOM. So the BAPI is not suitable for me.
I have also tried the FM CO_ZF_PRODUCTIONORDER_CREATE but no luck.
Does any one know other FMs to create Production Orders with positions?
Thanks
Bhasker.

Bhaskar,
Try Using one of the following BAPIs:
BAPI_PRODORD_CREATE_CAP_REQ BAPI: Create Capacity Requirements for Production Orders
BAPI_PRODORD_CREATE_FROM_PLORD BAPI: Convert Planned Order into Production Order
BAPI_PRODORD_CREATE_FROM_REF BAPI: Create Production Order with Reference Order
Do't forget to reward if useful

Procurement Key 'F' - System will allow to create production order

Dear All,
Pls help solve below issue
Sub-assembly (HALB) material type with Procurement Key is 'F' - but System will allow to create production order, our management don't want to allow this. how to activate the error messges
I checked the system messages CO 046, 047, 048 - it will not help for these messages
Any way to control this (except user exit, badi)
Regards,
Sankaran

Hi Sankaran,
What I infer from your statement is that user is able to convert planned order into Production Order (MD04 or CO040). You want to issue a warning message during this converion.
You can configure warning messages through OPJB.
Whether this material with procurement type F was setup initially with a different setup? Please check whether any routing details exist for this material and also check whether there is any special procurement indicator. One more check is with your MRP Group settings.
Hope this helps.
With Best Regards,
Srinivas

How to create Production order in SAP B1

Hi Experts,
Can anyone send me a link on how to create Production Order in SAP Business One?
Regards,
Vishal
Ver: SAP Business One 2005 B (7.40.253) SP: 00 PL: 43

Hi,
Kindly check the following link for the How to Guide on various topics :
[How to Guide|https://websmp210.sap-ag.de/~form/sapnet?_FRAME=OBJECT&_HIER_KEY=701100035871000371280&_SCENARIO=01100035870000000183&]
You can search for the document Production and Bill of Materials.
Kind Regards,
Jitin
SAP Business One Forum Team

How can mass creating production orders???

In SAP ,we can use CO01,CO09,CO07 to create production order. But by these TOCDES,we only can create one production order for one finished product once a time.
But we now need to create more then one ,may be more then 50 production orders once a time?
It is possible in SAP?
I know we could conver the production orders from plan orders after MRP run.But sometimes
for some reasons we must create produciton orders manually.And I also know in SAP some TCODE can process many production orders once a time ,like COHV,CORM, can release ,TECO many production orders once a time.
But how can mass creating production orders once a time，not by mrp run?
How can batch create produciton orders in SAP?
Thanks for any reply!

Hi,
Use the BAPI - BAPI_PRODORD_CREATE or for internal orders BAPI_INTERNALORDER_CREATE
Take the help of your abaper, he / she can use the above BAPI to write a custom program to mass create production order.
Hope the above helps.
Regards,
Vivek
Added
You can also use the below BAPI's in your custom program:
BAPI_PRODORD_RELEASE to release the orders
BAPI_PRODORD_CHECK_MAT_AVAIL for carrying out material availability
Edited by: Vivek on Mar 22, 2009 8:27 PM

Error creating Production Orders in UNCONSTR version

I am copying prodcution orders from version 000 to unconstr version through Report I am getting following error.
Error creating Production Orders in UNCONSTR version and Message no. ZSXXPAPO140.
when I am executed in background it is giving following error.
PPM FG100203.01_19_FR04_P for product FG100203.01 is not valid at the required explosion date 14.01.2010 /SAPAPO/RRP 325 E
Please suggest me any one it is a great help to me.

Hi Venkat,
It seems there is an inconsistent PPM FG100203.01 exists
in your planning version from which you are copying.
Check the possibilities of repairing that PPM and retry
copying. Orelse In the /SAPAPO/VERCOP transaction,
under the product selection criteria, exclude that item and
try copying the version.
Regards
R. Senthil Mareeswaran.

Creating Production Order from Planned Order

Hi,
We are trying to use the BAPI 'BAPI_PRODORD_CREATE_FROM_PLORD' to create Prod. Orders. But it is failing with the message, 'Cannot be saved. Maintain serial no.' Now, the problem is there is no input parameter in this BAPI for providing the serial numbers. Our current Z program manually generates the Serial Numbers and uses BDC for 'CO48' to create the Prod. Order but has a horrible performance and for that reason we are trying to switch to BAPI instead).
Now, the question is how best to achieve this objective: Use the BAPI to generate Prod. Orders from Planned orders with user-given serial numbers when there is no input option in the BAPI?
I think of couple of options but not sure how good they are:
1) Can we create/attach the serial numbers to the equipment/material first and then create production orders?
2) Use implicit enhancement to add another parameter to BAPI and use it instead. This one seems little technically complicated because the BAPI itself calls tons of other programs (including CO48) to create Prod. Orders so the right place to insert the numbers might be difficult.
Any clues how to solve this problem would be appreciated..
Thank you

Hi,
REM manufacturing is simpler way to book the production.
What is needed for REM is first question.
1) REM profile
2) Material on REM with this profile and REM tick
3) Have normal BOM and routings/ rate routings and work center
4) Define Production Version
5) Define Product Cost Collector on which all costs are booked whenever you do your confirmation thro MFBF
Having defined these master, once you run MRP you get planned order of PE type. It was earlier also callled as RS i.e Run Schedule.
By using MFBF, backflushing transaction can book the production. REM is period based type of production booking unlike discrete where you make a production order of particular material for some dates, it is lot based production booking.
Hope it is clear.
Srini

T-code CO01 to create Production order:error message "No routing found"?

I use t-code CO01 to create Production order.At the first screen I select material 72 and plant HJW1 .At the Header creen,I input the data in the General tab and press return but the sap show the error message "No routing found".But I have create the routing for the material 72 and plant HJW1.I don't know why the sap found no routing.So my question was how to found the reason about why the sap can not found the routing and how to resolve this problem.Thank you.

Hi,
Probably you would have created the routing today, with valid from todays date. But the order you are creating may be with start date in past and system is not able to find and valid routing for the day.
I would suggest you to remove both the Basic "Start" and "End" and change the scheduling type to "Current date Scheduling", now enter. If system still not finding the routing, use the function "Read PP Master data".
Regards,
Prasobh

Create Production order

Similar Messages

Maybe you are looking for