Create profile parameters using RZ10

Hi friends,
i have BW 3.1c and when i am trying the transaction RSA1 , it says YOU MUST ONLY WORK IN CLIENT 000 , i know that i have to create profile parameters using RZ10 before client copy but i dont know how to create/copy the profile parameters , if you can send me the step by step instrutions on how to create profile par using rz10 , your help will be much appreciated.
Thanks Very Much
Yach

Hi,
The solution is available in the note: 122679
Set the default client as described in Note 116432 point (e) (setting the productive client) to the client that you will work with.
In addition you must enter this default client in the field BWMANDT of the table RSADMINA (transaction SE16).
With rgds,
Anil Kumar Sharma .P

Similar Messages

Accessing Exchange Profile Parameters programatically (using Java/ ABAP)

Hi All,
Exchange Profile parameters can be accessed using the URL http://<server>:<port>/exchangeProfile
Does anyone know how to access 'Exchange Profile parameters' programatically. (from java).
Code snippet for the same would be of great help.
Regards,
Siva Maranani

Hi,
Is there any way to access exchange profile parameters using Java?
I need to access exchange profile from an UDF.
Thanks in advance.
Pedro Leal

Changing profile parameters

i want to change a few profile parameters - when i search them in transaction RZ10 - i can't find them but when i search them in transaction TU02 i do find them but i can't change them - how can i change these profile parameters?

Hi Moshe,
You can change parameters using RZ10, just open the right profile, then click on the Display <-> Chnage button, and then modify or add new parameter, then press copy go back and Save.
Restart SAP for the change to take place.
Regards
Juan
PS: Please reward with poins if helpful

Anyconnect created profile not shown in connection list, especially the wireless profiles.

Dears,
Kindly advise as we encounter anyConnect issue, when creating profile for using with ISE, the new created profile is not shown in the connection list.
I’m using profile editor to create profile for EAP-Fast, the issue is that the profile that was created not shown in the connection list.
i put the xml file in the correct location
C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Network Access Manager\newConfigFiles
in windows 7.
it is shown in saved networks but not shown in the connection list.
we tried profile editor version 4 but the same issue still exist.

Hi,
Test the System Connector Type in the Portal.
Connector should be any one of the Types :JDBC, ODBO, XMLA, OLAP then only the BI systems will be appear in the BI integartion wizard,
Govindu

Creating Relationships and using synchronization parameters in SUP

Hello Experts ,
I am developing an iPhone application using generated code from sup .
I want to put forward some querries that i have in my mind .
Basically my scenario is i have an equipment list and details for each equipment .
On iPhone one page displays the list and on clicking on any equipment i go to another page displaying eq details .
1.How do i filter data for details based on particular equipment number selected on first screen .
2.In SUP i have 2 mbo's , one for eqpmnt and another for details .Does creating relationship between them in sup changes generated code and filters data automatically in xcode .
3.Do i have to use synchronization parameters in this case to filter out data .
If not please tell me how should i go forward about this .
Any kind of help would be appreciated .
Thanks & Regards ,
Rockky .

Hi Rockky,
1- If you want to filter data on page displays list then you have to create synchronization parameters. Once you retrieved data from back-end it all comes to CDB (sybase consolidated database) so synchronization parameter filters data from cdb for which input you entered.
2- If you display detail of any equipment you have to set relation between root and child MBO.
there is a very clear tutorial which sybase provides you can find samples about using relations and synchronization prmtrs:
http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01213.0200/doc/pdf/sup_tutorials_ioscodegen.pdf
Regards
Tahir

User Profiles being created and not using existing

I have a Windows Embedded 8 thin client. It will create a user profile when a user logs on and if they log off and log back on it will use the same created profile. However if we restart the thin client and go to log on it will create a completely
new profile for the user. It does this every single time it is restarted and a user logs on. So under the users folder it will have several copies of profiles for that user adding something to it each time. Example: Username, Username.Domain, Username.Domain.000,
Username.Domain.001 We have turned off the netXclean to keep it from removing the user profile at logoff. I have added the C:\Users folder to the write filter exclusion list to make sure it is allowed to write to that location. What would cause
it to not use the exisiting user profile for a user and recreate one only after a restart? It is a soft restart/shutdown we aren't hard powering off as I could see the user profile getting corrupted if that were to happen.
Luke

Hi,
It seems like your account log as temporary profile. Please navigate to the registry below and delete the effected profile's subfolder for test.
HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
Here is another thread that have multiple talking about Temporary profile, maybe helpful with your problem.
http://social.technet.microsoft.com/Forums/windows/en-US/5ec0b949-effa-4e30-ba09-dc948a4c7a8b/windows-7-starting-with-a-temporary-profile
Roger Lu
TechNet Community Support

Profile parameters

Hi all ,
my system showing one warning .Actually i am having ECC with Abap.When ever I was entering the RZ10 t code and click on to the display ,create or any button it showing this warning "there is no any profile parameters".can you suggest to me how can i add profile parameters i mean default profile parameters.
regards ,
sai

you can set profile parameters....
SAP profiles are operating system files that contain instance setup information. The profiles are stored under /usr/sap/SID/SYS/profile directory.
The following three types of parameter files are defined in SAP:
u2022 Default -DEFAULT
u2022 Start profile - START_DVEBMGS00_
u2022 Instance profile - SID_DVEBMGS00_
These parameters are used for setting the system parameters. These parameters can be maintained by the transaction u2018RZ10u2019 or through the menu:
CCMS ->Configuration ->Profile maintenance
For creating a new profile:
1. Execute transaction u2018RZ10u2019
2. Specify the name of the profile that is to be created and choose Profile -> Create. The system creates the version number automatically.
3. Enter a short description of the profile, the filename into which the profile should be activated, a reference server and the profile type. Then choose Copy.
4. You can maintain parameters and their values by flagging either Basic or Extended maintenance and choosing Maintain.
5. Once the changes are made, choose Copy to return to the initial screen of Transaction RZ10.
6. Then check, save and activate the profile that has been created
7. After this the instance has to be restarted
and also use the links which i provided in my previous post.
regards,
Pradeep

Creating Routings Operations using BAPI_ROUTING_CREATE

Hello,
I am creating Routing operations using BAPI_ROUTING_CREATE. The parameters which I am using are:
PROFILE
TASK
MAT_ALLOC
OPERATIONS.
The group counter and group are given internal number assignment.
In my case for 1 material number plant combination only 1 task exist. This can be considered as Header record. For this Header record there are multiple operations. My program calls BAPI only When any combination of MATNR or WERKS changes in MAT_ALLOC. It works fine for 1 operation but fails incase of multiple operations. The error is routing material assignment does not exist. I have checked for all madatory parameters in FM documentation. The BAPI when executed independently works fine but in program it fails.File format is
Mat. No. Plant Key Date Status Usage Operation Number Work center Control Key Description val unit.
I am calling BAPI only when Mat no or plant changes.Unitl then I append the data in internal tables.
Passing the data in this format every operation is given Mat No and Plant, then y it is giving error routing material assignment does not exist.
Please help in this regard.
Thanks
Khushboo

Well actually that´s almost exactly what my task is as well.
So what i do is:
- reading the headdata of the given routing (the one which is to be copied)
- reading the positiondata of the given routing (the one which is to be copied)
then calling the BAPI_ROUTING_CREATE while exporting the headdata and the positiondata to the BAPI.
It works perfect for the routing itself, but the BAPI doesnt create any operations while it displays a sucess message and NO errormessages.

Profile parameters setting

Dear Experts,
while I am creating default profile using RZ10 I am getting the below error?
"File name is not DEFAULT.PFL - Profile is not recognized by SAP System"
I dont understand why the system is not showing the default profile which is already there at OS level.
Why do we required to create this file once again?
This situation is after fresh SAP instalation.
Regards
Hari

Hi hari,
You unit to import the profile of active server first time after fresh installation. This will create the profile automatically and this is the pre-requisite as well.
Path : RZ10-> Utilities->Import Profile
Hope this helps.

How to create profile for apple tv

How do i create profile file for Apple Tv?

it really comes down to what you mean by a pofile file
profile is often used for a custom setting for a user
a file is a storage unit located on a file system on a device
non of those things are a feature supported in the way you present it by the appletv

Praoblems in creating a variable using JSP - el

Posting this again :
Please help
How to create a variable using <c:set> whose value is
specified within the tag body . I want to use this
variable created as one of the parameters in a
javascript method call . But my problem is when I run
my application and do the view source , the HTML page
shows me the variable as it is without substituting
its value .
can anyone help ??? its urgentThis is my code :
<c:forEach var="photo" items="${photos}" varStatus="status" >
<c:set var="photolink${status.index}" >
Click to view full-size: <img style=margin-left:20px src='http://147.147.2.91:7001/pfk-deploy/thumbnail.do?photo="{photo.photoid}"' border=0 width=75 height=56> 
</c:set>
doSearch( "<%=desc%>", '{c:out value="${photolink}"/}');
</c:forEach>
Iam using weblogic 8.1 and my web.xml says Web Application 2.3.
Can this be a problem.

Posting this again :
Please helpWhy? How'll that help - you should have posted the extra info in your original post - http://forum.java.sun.com/thread.jspa?messageID=4327403. Double post.
ram.

Issue while creating Outbound Delivery using Standard BAPI

Hi all,
I am trying to create an outbound delivery for a Sales order using the Standard BAPI - BAPI_OUTB_DELIVERY_CREATE_SLS.
After giving the valid inputs for Sales order no and doc no, am getting an error as "No instance of object type OutboundDelivery has been created. External reference:" But when trying to create manually there is no problem. Please suggest what may be the issue and how to correct it?
Regards,
Vimala P

Hi Vimala,
I am trying to create outbound delivery using BAPI_OUTB_DELIVERY_CREATE_SLS & BAPI_DELIVERYPROCESSING_EXEC. But no success. Getting "No instance of object type outbound delivery has been created" in return.
1) Delivery Type
2) Delivery selection date
Needs to be passed in import parameters.
Could you please tell me what are all the parameters to be passed under tables tab in RV_DELIVERY_CREATE?
Thanks in Advance..
Regards,
Rajasekar .M

What are the adm_modresname and adm_moduseruid parameters used for?

The following parameters are in the server configuration file (unison.ini).
What are these parameters used for? 

[UTL] 
adm_modresname = FALSE 
adm_moduseruid = FALSE 

These parameters accept only the default values shown above and are not
configurable. They were not meant to appear in the documentation or in the
default unison.ini file.

Please do not attempt to change these parameters.

Yes I have explored this pdf...but it doesn't tell how to use the policy from the BPM. My question is if I want to use the policies from BPM, then do I need to install the SSM ?
If yes, what are the correct steps of installation ?
I am getting the errors while configuring the Java SSM.
Is Admin in the same BEA-HOME as SSM: [default: Yes]:
Give the location of the Admin: c:\bea\ales32-admin
Enter the identity directory name which will be used: [default: CoESSM_dir]:
Enter the root node which will be used to create resources: [default: //app/policy/CoESSM_app]:
Checking if default ARME port is free: 8000
Generating policy files based on templates ...
Checking if SSM instance already present
Checking to see if SSM ARME port is free.
Checking JDBC parameters...
Checking to see if asipassword was run...
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.AlesConfig - You need to run asipassword first
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.ConfigurationTool - Error making changes: You need to run asipassword first
I have tried running the asipassword utility, but still it gives the same error. Please let me know what am I doing wrong?

Create Excise invoice(J1IIN) document while creating billing document using bapi BAPI_BILLINGDOC_CREATEMULTIPLE

Dear Experts,
My scenario is:
We have batch split scenario, where the parent line item of billing document has 0 quantity and its subsequent item (item with batch number) holds actual quantity data.
When we create billing document using VF01 against delivery document, system creates billing document along with excise invoice document (J1IIN Document). And in excise document contain same number of line items that of billing document. Please see the below attachment:
Biiling document screen shot:
While creating billing document, the J1IIN Document created automatically. Below is the screen-shot for the same.
Now the issue is:
When we create billing document using BAPI: BAPI_BILLINGDOC_CREATEMULTIPLE system creating only billing document and not creating excise invoice document.
When we create excise document manually using J1IIN the zero quantity line items are excluded in excise invoice document.
Please see the below screen-shot for the same; The z quantity line items are missing.
We want excise document to be created while creating billing document using BAPI BAPI_BILLINGDOC_CREATEMULTIPLE. Or is there any other BAPI for the same purpose.
Customization is also maintained for creating excise invoice document automatically.
Regards,
Rajesh Sadula.

HI
Pricing will be carried basing on the pricing
procedure.
Case1: Prices will be carried out automatically if
necessary condition records are maintained for the
condition type.
For this you can go to Sales Order-> Item Conditions
In the screen you can click on command button Analysis,
which gives you the list of condition types associated
to the pricing procedure. By clicking on the condition
type you can know the action that has taken place.
Case2: Manually forcing prices for Items.
To do this, you have to populate ORDER_CONDITIONS_IN &
ORDER_CONDITIONS_INX. Also note to identify the item
numbers, you manually pass the item number for each item
in the sales order, use the same item number for
populating conditions.
Parameters required:
ORDER_CONDITIONS_IN:
ITM_NUMBER, COND_TYPE, COND_VALUE, CURRENCY
ORDER_CONDITIONS_INX:
ITM_NUMBER, COND_TYPE, UPDATEFLAG, COND_VALUE,CURRENCY.
Hope the above info helps you. Do revert back if you
need more info.
Kind Regards
Eswar

Setting user specific contract data while creating sales order using BAPI

Hi all,
I am creating sales order using BAPI - BAPI_SALESORDER_CREATEFROMDAT2.
Now my problem is that there is no structure for contract data (i.e. VEDA), system automatically set contract data using customization values.
I am doing some validations on cotract data in MV45AFZZ which fails, because these validations are performed on standard values, user specific values r not set.
How to handle this issue, your small clue may help a lot.
Regards,
S@meer

HI
Pricing will be carried basing on the pricing
procedure.
Case1: Prices will be carried out automatically if
necessary condition records are maintained for the
condition type.
For this you can go to Sales Order-> Item Conditions
In the screen you can click on command button Analysis,
which gives you the list of condition types associated
to the pricing procedure. By clicking on the condition
type you can know the action that has taken place.
Case2: Manually forcing prices for Items.
To do this, you have to populate ORDER_CONDITIONS_IN &
ORDER_CONDITIONS_INX. Also note to identify the item
numbers, you manually pass the item number for each item
in the sales order, use the same item number for
populating conditions.
Parameters required:
ORDER_CONDITIONS_IN:
ITM_NUMBER, COND_TYPE, COND_VALUE, CURRENCY
ORDER_CONDITIONS_INX:
ITM_NUMBER, COND_TYPE, UPDATEFLAG, COND_VALUE,CURRENCY.
Hope the above info helps you. Do revert back if you
need more info.
Kind Regards
Eswar

Create profile parameters using RZ10

Similar Messages

Maybe you are looking for