Create PS Report Painter using Z fields

Hi all!
Can any one help me how to create report painter from PS using Z fields which were added in table PROJ by append CI_PROJ?
I need to know how to turn this fields visible to add in creaton of the variable . transaction CJEV.
Thank you
Best Regards
Lina

Hi,
I have not worked on it but you can try this out:
TCODE for report writer table is GRCT.
There You need to add your z fields in some pre-defined structure like CCSS and then activate the structure and then activate characteristics.
NOTE: 24 charcter is max. length for the characteristics.
Regards,
Harsh.

Similar Messages

  • Generate Data selection in Report Painter using Z fields

    Hi all,
    I had created Customer specific fields in project definition and now i want to use them in PS reporting.
    I did what note 929889 say to do that, i created structure CI_CC1S and included my Z fileds. Then i entered GRCT and create a new entry: CCSS in field  table and in Field name ZZDEPARTAMENTO.
    I went to GR22 and modify 6P3 library to check this new characteristics.
    In report writer i created the variable with a set , execute report and may new field appears in selection screen, the problem is that the program SAFK21R doesn't consider my new field in the selection so the display is wrong... what is missing? CAn any one help with this issue?
    I think it's because structure CCR1S is empty in the Z fields.... what i need to create to report recognize z field as selection options.
    Best Regards
    Lina

    hi poonam,
              u can add the field by selecting one of the radio buttons. i.e.,
    keyfigure with characteristics.
    predefined key figure
    formula
    Then u select the field which u want to add and provide options as per ur requirement right..
    i dont know why r u getting dump...
    i have just tried and it is working fine for me..
    Rgds.,
    subash

  • Create Report Painter using LIS table

    Hi Expert,
    I'n new in ECC version but I found we can create report painter using LIS table,
    but I'm not success to create report without error or debug
    Anybody have the documentation about it ?  or tell me how it works ...
    Please ..urgent...need to tell client about it..
    Thanks

    Hi,
    I have not worked on it but you can try this out:
    TCODE for report writer table is GRCT.
    There You need to add your z fields in some pre-defined structure like CCSS and then activate the structure and then activate characteristics.
    NOTE: 24 charcter is max. length for the characteristics.
    Regards,
    Harsh.

  • Unable to create a report painter form (Message no. KH205).

    Dear all,
    I am trying to create a report painter form, but the system gives an error:
    Key figure scheme  contains errors -> check definition
    Message no. KH205
    Diagnosis
    Entry   not contained in Table T237A.
    Procedure
    Check key figure scheme  (in particular line 9062) in table T237A.
    I checked in Tcode KER1 but did not find any Key figure scheme.
    Afterwards, I checked table T237A and T237 and found out that number of hits in table 237A is less than in T237A.
    I think this is the reason why system has such reaction.
    Please help me with this issue.
    Best regards,
    Linh.
    Edited by: tvlinh on Mar 7, 2012 11:22 AM
    Edited by: tvlinh on Mar 7, 2012 11:22 AM

    Hi,
    This issue can occur if you have transported the Key Figure Scheme (KFS) from another system and /or deleted value fields. Has this happened ?
    To fix the issue you need to renumber the T237 in the source client executing the function module RKE_FILL_TABLES_T237FF as mentioned in the note 13838.
    After this try to create a new form and check if that works. If there are still problems with the existing form/report then the best
    way might be to delete and create again
    regards
    Waman

  • Need a Demo for creating a report painter

    Hi,
    I am new to report painter. i have already gone through some documents but i dint get a clear idea.
    Can anyone give a demo for creating a Report Painter?
    Thanks in advance.
    Regards.

    hi
    you can refer to following links
    http://help.sap.com/saphelp_47x200/helpdata/en/eb/1377e443c411d1896f0000e8322d00/frameset.htm
    For Report Painter
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/content.htm
    For Report Writer
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/content.htm
    Refer the following links :
    http://www.virtuosollc.com/PDF/Get_Reporter.pdf
    http://sap.ittoolbox.com/groups/technical-functional/sap-r3-other/accessing-tables-using-report-painterwriter-98766
    http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_bw31/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
    this may help you
    regards

  • Can we create a report painter report which shows the details of CC/CE/IO?

    Hi,
    I am trying to create a report painter report which shows the details of cost elements,cost centers and internal orders in a single section.I am able to create reports with 2 characteristics (like CC/CE or IO/CE etc.) but not with 3 characteristics (CE/CC/IO)  which is my case.I am trying to get data something like below.Is this even possible using report painter?I will appreciate if any one could suggest how to do this.
    CE          CC                        IO                        Amt
    600000  8190001100           1100001                $1000
                                              1100002                $2000
                                              1100003                $3000
                                                                          $4000
    620001  8190001101           1100004                $6000
                                              1200001                $2500
    . . . . . . . .and so on
    Thanks,
    Saurabh.

    >
    But when i am using the same synonym in crystal report design, my report is working fine.. but the same synonym is available as invalid in database..
    >
    What does 'my report is working fine' mean? Are you saying that if you rerun the query it retrieves fresh data from the database?
    What does 'same synonym is available as invalide in database' mean? How are you determining this.
    Synonyms can be created for objects that do not yet exist.
    create synonym q for table_does_not_exist
    select * from user_objects where object_name = 'Q'
    SYNONYM_NAME,TABLE_OWNER,TABLE_NAME,DB_LINK
    Q,SCOTT,TABLE_DOES_NOT_EXIST,

  • Error while creating a report that uses Oracle OCI JDBC connectivity

    Please let me know why my CR and LF characters are removed from my forum posting *****
    Hi,
    I was trying to create a report that uses Oracle OCI JDBC connectivity. I am using Eclipse3.4 download from "cr4e-all-in-one-win_2.0.2.zip".  I have successfully created a JDBC OCI connection.
    The connection parameters are given below:
    URL: jdbc:oracle:oci8:@xe
    Database: xe
    username: <userName>
    password: <password>
    I have tested the above connection in Data source Explorer and it works fine!!!
    But I am getting the following error when I drag-and-drop a table from the list of tables. Not sure what I am missing here?  Any help is highly appreciated.
    com.businessobjects.reports.jdbinterface.common.DBException: InvalidURLOrClassName
         at com.crystaldecisions.reports.queryengine.driverImpl.jdbc.JDBCConnection.Open(Unknown Source)
         at com.crystaldecisions.reports.queryengine.JDBConnectionWrapper.Open(SourceFile:123)
         at com.crystaldecisions.reports.queryengine.Connection.br(SourceFile:1771)
         at com.crystaldecisions.reports.queryengine.Connection.bs(SourceFile:491)
         at com.crystaldecisions.reports.queryengine.Connection.t1(SourceFile:2979)
         at com.crystaldecisions.reports.queryengine.Table.u7(SourceFile:2408)
         at com.crystaldecisions.reports.dataengine.datafoundation.AddDatabaseTableCommand.new(SourceFile:529)
         at com.crystaldecisions.reports.common.CommandManager.a(SourceFile:71)
         at com.crystaldecisions.reports.common.Document.a(SourceFile:203)
         at com.businessobjects.reports.sdk.requesthandler.f.a(SourceFile:175)
         at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.byte(SourceFile:1079)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1163)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:657)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:163)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:525)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:523)
         at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
         at java.util.concurrent.FutureTask.run(Unknown Source)
         at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$3.doWork(ExecutorWithIdleProcessing.java:182)
         at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(AbstractCancellableRunnable.java:69)
         at com.businessobjects.crystalreports.designer.core.util.thread.PriorityTask.run(PriorityTask.java:75)
         at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.runSubtask(PriorityCompoundCancellableRunnable.java:187)
         at com.businessobjects.crystalreports.designer.core.util.thread.PriorityProgressAwareRunnable.runSubtask(PriorityProgressAwareRunnable.java:90)
         at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.doWork(PriorityCompoundCancellableRunnable.java:144)
         at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(AbstractCancellableRunnable.java:69)
         at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$IdleTask.run(ExecutorWithIdleProcessing.java:320)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Thanks
    Karthik
    Edited by: KARTHIK1 on Oct 14, 2009 9:38 PM

    Hi Ted,
    Thanks for the feedback. I was able to create a report in Creystal Reports Designer 2008 using OCI.  It is not allowing only in the Eclipse plugin. In our environment we are not allowed to user Oracle thin connections and ONLY OCI is allowed.
    1) Can you please let me know if there is a way to do this? 
    2) Will it allow data sources using native database driver?
    3) If so, can I use JRC to create these reports from a desktop java program?
    Thanks & Regards
    Karthik
    Edited by: KARTHIK1 on Oct 15, 2009 4:38 PM

  • Create crystal report file using JAVA

    Can someone tell me how to a Create crystal report file using JAVA Programming
    I want a very simple example

    Please help me. It's urgent.[http://catb.org/~esr/faqs/smart-questions.html#urgent]
    Be back in an hour or two...

  • How to find report created with Report Painter?

    Hi!
    how to find report created with Report Painter?
    Here is the information that I have:
    Object filename, let's say <b>Y_P01_90000001</b>
    Report painter object <b>INV-102</b>
    The thing is that Library is unknown, thats why I can not find it via GR22...
    Any ideas?
    Will reward,
    Mindaugas

    Check in GRR3 under <b>INV</b> node...

  • How to create custom report plugin using child region report metadata

    Hi,
    I want to ask for help on how to create custom report plugin using child region report metadata. My idea is to create a child region, a classic report and set the condition to never.
    Then i will query the child report metadata from apex view and use it to create a custom report like using jquery jq-grid. Any idea how i can create a process that will use the child report
    metadata? I dont know how i can create a process just like how apex work, how apex render report, coz i want it to be control using the standard apex report attribute. This plugin will
    render according to the child report attribute.
    Is there anybody here had ever done this?

    Hi Nicolette,
    Thanks for the reply. I know where to find the metadata, just asking for idea on how the rendering process will be.
    Start from determining column heading, column order until finish rendering the report. The same way how apex
    render the classic report.
    Previously this imy my rendering process:
    FUNCTION GETCOLUMN(P_REGION IN APEX_PLUGIN.T_REGION,
                         P_PLUGIN IN APEX_PLUGIN.T_PLUGIN,
                         P_VALUE  IN VARCHAR2) RETURN SYS.DBMS_SQL.DESC_TAB2 IS
        VSQLHANDLER     APEX_PLUGIN_UTIL.T_SQL_HANDLER;
        VCOLCOUNT       NUMBER;
        VCOLNAMES       VARCHAR2(2000);
        VAJAXIDENTIFIER VARCHAR2(100);
        VPAGESIZE       TYPEATTR := P_REGION.ATTRIBUTE_04;
        VJSCODE         VARCHAR2(32767);
      BEGIN
        VSQLHANDLER := APEX_PLUGIN_UTIL.GET_SQL_HANDLER(P_SQL_STATEMENT  => 'select * from s_emp',
                                                        P_MIN_COLUMNS    => 1,
                                                        P_MAX_COLUMNS    => 999,
                                                        P_COMPONENT_NAME => P_REGION.ID);
        VCOLCOUNT := VSQLHANDLER.COLUMN_LIST.COUNT();
        FOR I IN 1 .. VCOLCOUNT LOOP
          VCOLNAMES := VCOLNAMES || '{name: "' ||
                       UPPER(VSQLHANDLER.COLUMN_LIST(I).COL_NAME) || '",';
        END LOOP;
        APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
        RETURN VSQLHANDLER.COLUMN_LIST;
      EXCEPTION
        WHEN OTHERS THEN
          APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
          RAISE;
      END GETCOLUMN;
    So this is how i get the header for my report plugin. The same method is use to get the value / data for each column. This process is work. So now
    i want to extend my plugin so that i will use all attributes from the child report to render my plugin. So the column header, column order, all will depend
    on the child report. And the column display condition is set, it will also check the condition before render the column. Sounds like i want to reinvent
    the normal apex rendering process but this is what i want to achieve.
    I need help to find the correct logic for my render process. Don't want too much for starting, just want to render the plugin correctly, same with child report,
    same columns alias, column ordering and column  conditional display.
    Thanks,
    akulala

  • How to attach the T.CODE to a report created through REPORT PAINTER

    Hi all,
    Please tell me "<b>How to attach the T.CODE to a report created through REPORT PAINTER".</b>.
    Please show me the way how to do it as its getting too firing issue !!
    Awaiting for the early responses !!
    M.Soni

    Dear All,
    I got some good inputs from <b>Jessie</b> on this issue and observed that the reports which are created through report painter are standard one having entries in the TSTCP table .
    <b>But the reports(Through Report Painter) which are creaed by us has no entry in TSTCP table !!</b>
    Kindly show the way, how to attach the T.code to the reports which are created through report painter. as its getting so buggy now !!
    Please tell me if someone know about this.
    <b>Please note all my reports are created directly in the 500(Production</b>).
    Waiting for quick inputs !!
    Regards,
    M.soni

  • Report Painter using user exit U002 to create a formel variable for FI-SL

    Hi,
    I would like to use Report painter creating a formel variable with U002(VAR1,VAR2) for FI-SL and did following:
    1. go to TCode: GS11
    2. Formel: selecting U002 from Formel-Exit list and giving var1 and var2
          '#U002(VAR1, VAR2)'
    3. Save
    4. Erro message: U002 is not definiert.
    Why???
    U002 is already implementiert  in
    Class ZCL_IM_FI_FORMULA_EXIT
    method IF_EX_G_SET_FORMULA_EXIT~EVALUATE
    CASE flt_val.
        WHEN 'U002'
    Could anyone help me? Thanks!
    Klara Zhao

    dollyb wrote:
    if enter 05.2008
    the volume should look like below as a vairable range.
    sales volume
    01.2008 - 05.2008
    you want  01.2008 - 05.2008 as description , thats what your requirement right?
    When 'ZTEXT2'.
    DATA: ZYEAR(4)   TYPE C,
    ZTEMP1(6) TYPE C,
    ZLOW(14) TYPE C.
    if i_step = 2.
    CLEAR L_S_RANGE.
    Loop at i_t_var_range into intern_range where VNAM = 'user entered variable for calmonth'.
    *lets say user entered 05.2008
    ZTEMP1 = INTERN_RANGE-LOW.
    * now ZTEMP1 has 05.2008
    ZYEAR =  ZTEMP1+0(4)
    * zyear = 2008
    *A SLIGHT MODIFICATION TO CONCATENATION 
    CONCATENATE '01'  ' .'  ZYEAR '-'  ZTEMP1 INTO ZLOW.
    *SO 01. 2008 -05.2008 WILL BEN IN ZLOW
    L_S_RANGE-SIGN = 'I'.
    L_S_RANGE-OPT = 'EQ'.
    L_S_RANGE-LOW = ZLOW.
    APPEND L_S_RANGE TO E_T_RANGE.
    ENDLOOP
    ENDIF.
    use the text variable as description then u will get the required result i.e &ztext2&
    HERE I DIDN'T written any  L_S_RAnGE-HIGH.
    Regards,
    Ranganath
    Edited by: Ranganath on Nov 9, 2011 9:41 AM

  • Report painter: include new Field

    Hi Experts,
    I would like to create a new  report painter  based on table GLPCT data.
    But, I would like to include this field CCSS/KSTAR in this report. I have create a new variable ZKSTAR for this.This variable is not included in table GLPCT.
    I don't know how to include this variable in my report.
    Please help,
    Baki

    Hi,
    KSTAR is cot element, which is not a part of PCA document, stored in GLPCT as totals. You should use RACCT (account) field for this purpose.
    Regards,
    Eli

  • New Characteristic in Report Painter using table CCSS

    Dear all,
    Can someone help me add characteristic "Original Business Transaction" COBK-ORGVG into a report painter report that is using table CCSS.
    Any help would be appreciated and points will be assigned.
    Kind regards to all.
    Orestis Chaitas

    I am designing the P&L report and I want to split my R&D expenses split down by Internal Orders. Since, I have not seen Internal order field in summary table of new GL..ie., FAGFLEXT  table.
    I want to know how this can be achieved in the same report in report painter.
    I am talking this issue from Report Painter point of view where each report is based on library , which is defined per summary table.(ie., Library can refer to only one table....finding it odd to believe there is no join in reporting tool).....
    Thanks and let me know if you want to know more on the issue I am facing.

  • Report Painter - Use of Constants / Local Formula Variable

    Hi,
    I am using constant and/or local formula variable in report painter in FSI.
    I could use both the values for calculating percentages, ie. it can be used for multiplication or division. However, when I try to use it for addition or subtraction, I am getting the error message no. KH206.
    In all cases, I am using different values in the formula, i.e. a absolute figure and a GL based figure.
    I am not able to understand, why it even allows me for calculating percentage.
    Can anyone help me in using a absolute figure for input and thereafter use it in addition / subtraction.
    I would prefer an immediate solution to this as I am in the final stages of this report.
    Full points guaranteed.....

    Hi Kash,
    Thanks for your reply..
    Can you elaborate bit further. You mean to say I should create a Constant with some value.
    Thereafter how should I bring that in the form. But, How do I enter the Constant in the Formula... There is no key for entering any text in the formula.. there are only ID (the values which we bring in the form and which can be selected for the formula) and numbers which can be entered.
    So how do I enter the name of the Constant?
    I tried just keying in the name of the Constant, and I could check the formula also, However, while saving the form, I am getting an error,
    Element WCaplimit Bis letztem ATag bis &$BISD is not defined correctly -> check definition
    Message no. KH206
    Diagnosis
    In element WCaplimit Bis letztem ATag bis &$BISD the system adds quantities and values or different currencies.
    Can you please revert back with step by step solution?
    Appreciate your prompt reply.... Thanks

Maybe you are looking for