Create PXI Format Hard Drive Disk

Hello,
Can i use a "Create PXI Format Hard Drive Disk" created from LV 8.5.1 ver for formating the PXI RT controller which is having LV RT 7.1.
Regards
Aks
(Appreciate answers by giving KUDOS)
Hit the stars.............. sky is not the limit.

Hi,
I think you can, but you'll need LV (RT) 7.1 on the host PC to install LV RT 7.1 on the PXI controller using MAX after formatting it.
(Unless you have an image created by the RT replication toolkit, but then other problems might arise...)
Daniel

Similar Messages

L305D-S5934 Has formatted hard drive, can I load recovery disk from a different machine?

Hi,
I have an older L305D (can't remember the sub group model, but it does not have the web cam). The LCD screen went out so I bought a L305D-S5934 with a formatted hard drive. I swapped my old hard drive into the new computer, but it will not boot up. It tried to recover, but that failed. Can I make a recovery disk with my old computer to use in the new one, even though they are different sub models? The new computer has a Windows license on it. If I can't make a recovery disk with the old one that will work, can I get a copy of Vista Home and use the license on the new computer to install it or does the license only work with the recovery disks? Once I have an operating system installed, I know I can get the right drivers from this website. Any help/ideas would be appreciated! I would rather not have to buy a recovery disk through Toshiba if I can avoid it.

Satellite L305D-S5934
Can I make a recovery disk with my old computer to use in the new one, even though they are different sub models?
That won't work.
can I get a copy of Vista Home and use the license on the new computer to install it or does the license only work with the recovery disks?
The OEM key won't work with a retail version of Windows. (And with the recovery discs it's unnecessary, because that one is pre-activated.)
The recovery media from Toshiba costs less than the product key for the retail installation DVD. And you don't need to mess around adding drivers and utilities.
Order Toshiba Recovery Media
-Jerry

Cannot Format Hard Drive in Recovery Mode

Hello everyone,
I am trying to perform a fresh OS X install on my MacBook Pro Mid-2012 13." I booted into internet recovery mode (to install Mountain Lion instead of Mavericks), but when I try and partition my hard drive, Disk Utility gives an error that reads "Partition failed with the error: File system formatter failed." Disk Utility then leaves me with a greyed-out volume labeled disk1s1. My MacBook Pro has the stock 500 GB HDD.
As an experiment, I successfully formatted the disk as NTFS with a Windows 7 boot CD, and also as FAT32 from Disk Utility, so I don't think the disk is failing. Also, verify disk runs without errors before I try and partition the disk. After partitioning, it tells me that I need to reformat.
I think the problem can be narrowed down to partitioning the drive with Disk Utility as JHFS+ (I also tried HFS+ via DiskUtil). Does anyone have any advice or suggestions?
Thank you in advance.

You can not use the recovery drive itself to reinstall OS X, but you can reinstall OS X without de-encrypting the drive.
WARNING: following these steps will remove all data from your harddrive. This process will in all likelyness not be reversible. Use at your own risk.
1. Prepare a recovery USB stick [1].
2. Boot from this stick
3. Start Disk Utility
4. Select the hard drive
5. Select the Partition tab
6. Change Volume Scheme to 1 Partition
7. Enter Macintosh HD in the name field
8. Click Apply
Your hard drive is now empty, you can use the installer on the same USB stick to re-install a clean OS X on your machine.
[1] http://support.apple.com/kb/dl1433

10.8.4 Logic Pro Hard Drive (Disk I/O) issue

Hey,
since yesterday my Logic Pro (9.1.8) has a big problem. After I installed the Update 10.8.4 the Hard Drive (Disk I/O) Display overloads everytime, when i start to play my vocals/tracks. Even older projects (i never had problems) with just 20 tracks and without third party plugins the HD Display goes up and with the latest project (49 Tracks) i cannot even create a new track anymore. It says "not enough memory" and then it crashes.
I bought my Imac some months ago. Just some informations about my Imac.
- Late 2012, 21,5"
- 16 GB Ram
- 2.7 GHz Intel Core I5
- Hard Disk 5400 revolutions per minute, Sata (still 900 GB free)
Basically I bought my Imac to create music and to use logic pro - its very frustrating .. i cannot work anymore.
I tried everything - change the settings, change the buffer size, not to use my interface, 32bit to 64bit, to delete Autotune (my only third party plugin) from the AU-Manager. I even had a call with the Apple Support (2 hours long) and they couldnt find a solution ..
If they cannot find a solution, i think its even harder to find someone here, who can help me. So my question is just, is there someone else who has a similiar problem with the update?? .. I'd say a problem shared is a problem halved :-)
thank you & nice greetings from Austria :-)

Hello Stefan,
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

SOLARIS OS Support for Advance Format Hard Drives

Hello,
I am fairly new to the UNIX Operating System so I'm hoping that someone can help me. Does Solaris support the new Advance Format hard drives (4k sector boundaries)? I cannot find any mention of the advance format drive in the Oracle literature. I believe, based on my recent reading that Open Source Solaris depends on ZFS to handle the support of the new 4kbyte sector size.
Thank you in advance for any information you can supply.
Steve

Moderator Action:
This post has been moved to the Solaris 10 forum.
@ O.P.,
You originally posted your inquiry to the Clustering forum, which has nothing to do with the topic of disk cluster size.
Glance at the documentation for Oracle Cluster 4.0 to see what clustering is all about.

Formatting hard drive for project compatibility PC /Mac

I'm editing a project for a friend who uses PC. I bought a Lacie Quadra d2 drive for the project. The media files I'm being give are DV and WMV files, which my friend will copy to the drive.
So my question is: Will there be any compatibility issues and is there any way to avoid them?
Should I (or how should I) format hard drive before giving it to my friend? And will I be able to take drive back as is and work with the files?
I appreciate any guidance.

Download this free driver: http://www.ntfs-3g.org/index.html#download and you can format the drive as NTFS, which both of you can read and write.
Once installed, NTFS will appear as a formatting option in Disk Utility.

Formatted Hard drives on my late 2005 g5 and cant reinstal os

I cant re-install my operating system from cd after formatting hard drives in a pc it say we are hanging here can any one help

The drives need to be Mac OS Extended & APM Partition Scheme, re-format them with the Install Disc...
How to format your disks...
http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
Thanks to Pondini, Formatting, Partitioning, Verifying, and Repairing Disks...
http://Pondini.org/OSX/DU.html

Could not deactivate before formatting hard drive

Hi, my hard drive failed and I couldn't uninstall and deactivate my Acrobat, so now I'm afraid I'll lose my license. Can anyone tell me what should I do?

Thank you so much!
2014/1/5 Bill@VT <[email protected]>
Re: Could not deactivate before formatting hard drive created by
Bill@VT <http://forums.adobe.com/people/Bill%40VT> in *Acrobat
Installation & Update Issues* - View the full discussion<http://forums.adobe.com/message/5983178#5983178

Drivers for format hard drive of desktop imedia A3523 made in year 2010

Can you please help
I need to down load drivers then burning to disks to reload a formated hard drive, o/s windows 8
( to clean hard drive, load drivers, then re-instll windows 8)
Thank you.
t.j.

As the imedia A3523 circa 2010 originally shipped with WIN7, you have an issue. Do you possess a retail WIN8 or upgrade WIN8?
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Is it possible to put a 1TB hard drive disk in my mid 2009 13 inch macbook pro?

I want to upgrade my hard drive disk (macbook pro 13 inch mid 2009) from 160 GB to possibly a 1TB. If I bought a 1TB hard drive disk would it work in my computer and would apple install it for me? If not is there anywhere in manhattan thats an afiliate of apple that would do it? I checked out Ifixit.com and was looking at how to do it on my own but honestly I'd probably screw it up. Any help would be much appreciated.
Thanks
Pete Benedict

Helmet20 wrote:
If I bought a 1TB hard drive disk would it work in my computer
yes.
would apple install it for me? If not is there anywhere in manhattan thats an afiliate of apple that would do it?
they would not install a hard drive you purchased somewhere else, however I'm sure a computer repair shop in manhattan that would be willing to. If you are looking for an Apple affiliate, or an AASP, here: https://locate.apple.com/service/?pt=4&lat=40.7902778&lon=-73.95972219999999. Call them and ask if they would do it for you.

Recovering data from a newly formatted hard drive

Has anyone had any experience with programs that recover data from a newly formatted hard drive? There seem to be a lot of programs out there to do this, but, a) do they work, and b) which one worked best for you?

Ive had so and so success with a freeware utility called "Recuva"
http://www.recuva.com/
Its from the makers of CCleaner.
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

Advanced Format Hard Drive not recognized by HP DV6000 Controller

Hello,
I have an HP DV 6000 laptop (6276 I think, I'm at work can't check) that came preinstalled with a Western Digital 160gb 1.5gb/s 5400 RPM drive (Vista) that failed a couple of weeks ago. So i bought a Western Digital 750 GB WD Black SATA III 7200 RPM 16 MB drive to replace it. I read about people having some problems with Advanced Drive Format hard drives not being recognized by their controller, but also read that depending on the controller and specific Dv6000 model laptop they had-one wouldn't run into problems.
Well sure enough, when attempting to install Windows 7 I received the error that the hard drive was not detected. After researching online I came across an article on WD's site that noted
"Our SATA II hard drives use autospeed negotiation. This enables our SATA II drives to automatically detect the motherboard data transfer rate, making it backward compatible with SATA I data transfer rates. However, some older SATA I controllers are unable to support autospeed negotiation and cannot recognize the drive. This “drive not detected” condition occurs when a chipset is incapable of correctly negotiating the data transfer speed with a SATA II hard drive."
my drive is a SATA ||| but I'm pretty sure it's the same problem. The site goes on to say a fix would be to "purchase and install a third party PCI or PCI-Express Second Generation Serial ATA controller card for your Serial ATA hard drive(s)."
My question(s) are.
1)Is the problem that I am trying to install a Sata ||| hard drive on a laptop with a controller that will only recognize SATA | hard drive?
2) Or is the problem that the hard drive is an Advanced Drive Formatted hard drive and I need to buy a hard drive with out that specification?
3) Or Should I buy a SATA controller card as WD suggests on their website and if so will this definitely allow my laptop's controller to recognize the new hard drive and proceed with the installation?
4)Or Should I just return the hard drive and buy a SATA | non Advanced Drive Format hard drive? (question 2 basically)
Thanks for your help!

Hi @jasmine00
Welcome to the HP Support Forums.
I certainly understand your issue with the drive upgrade. Unfortunately it is a bit of the nature of notebooks, the sacrifice of a large amount of upgradeability, in exchange for compactness and portability. Whenever a new technology comes out, older notebooks are never really going to be easy to upgrade, it at all. Normally the unit as a whole is tested with a set list of hardware, and only those items are supported.
That being said there is this document that could be helpful with your problem.
Preparing Advanced Format hard drives for Microsoft Windows installations on HP Business Notebook PC...
And for your reference:
HP Pavilion dv6000 Notebook PC Maintenance and Service Guide
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Cd/dvd drive not found, can I format hard drive with an external cd/dvd drive. If so how?

My cd/dvd drive quit working and is not found in device manager so I purchased an external cd/dvd rw. Now I am having other issues with installing software and windows updates so I would like to format hard drive. Can this be done with external cd drive, if so how do I boot from it? presario v6000 laptop windows vista 32bit os.

Restart the notebook >> start tapping F10 key >> go to configuration menu >> Boot Order >> select the Ext DVD drive as 1st boot device >> save and exit >> Insert the recovery disc >> restart the PC >> press any key when prompted >> follow the instructions..
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-||

Time Machine appears to be doing back-ups, but they do not appear on the external hard drive. The last one I can find is June 30. I did a utility scan of the hard drive disk and it is fine.

Time Machine appears to be doing back-ups, but they do not appear on the external hard drive. The last one I can find is June 30. I did a utility scan of the hard drive disk and it is fine. What do I do?

Click the Time Machine icon in the menu bar. The time of the last backup is shown in the drop down.

How do I create an External Hard Drive iPhoto Library

How do I create an external Hard Drive iPhoto Library? Will it remember faces and places, and the camera settings? I have over 20k photos. Most pictures are already stored in files on my external hd, but everytime I need to edit, I need to import the pics back into iPhoto. Is there an option for "editing software" outside of iPhoto? I do not want to store pictures on my computer, but I do like the "faces" feature! Please help!

Sure it can be UnDone in the same way it was done. By Copying the iPhoto library back to the original location or any other location on your internal drive and then Repointing iPhoto to use that Library as you did when you moved it to the external.
Have no idea about the thumbnails being blurry as I only use iPhoto for testing and helping others. I find iPhoto lacking in many ways and I already own Adobe Lightroom so I use that on my Mac.
I wouldn't think the thumbnails wouldn't be any different. They are the same files and even if the external is slower the Thumbnails should display the same way not differently.
I also do not allow any of the "i" programs, Photo & Tunes, to Copy my image or music files into their folder structure. I have them set to Leave the Files where they are, as I copy them to my hard drive where I want them Not where Photo and Tunes want to put them, and then just create a Library Database of them. So if I wanted to I could have just the actual image files on an External drive and then have iPhoto just create a Library database reference to them.
One Note though.
If you move the Library, including the actual image files, to an external and then start iPhoto without that external connected iPhoto will then Create another Library in the normal Default location that is blank and then you will need to point it to your original that is on the external once you reconnect that external.
That is one reason I don't care for iPhoto. Apple has made it fairly easy for novice users, placing everything in their User folder but IMHO that is not always the best way to do things.
Also at any point in time, even with the external connected, iPhoto will lose that association to the external Library and create another in the original Default location. Which will look like all your images are missing.
colleen747 wrote:
Thank you for responding. I understand. After reading quite a bit about this procedure, can it be undone? So many out there have stated that everything slows way down and the thumbnails are blurry. What is your opinion?
Do I first create a New File on the EHD and name it "iPhoto Library"? Then paste?
Most pictures are in folders on my EHD, how do I move them to the new library?
Thanks!

Create PXI Format Hard Drive Disk

Similar Messages

Maybe you are looking for