Create Recovery Disc Files on External Hard Drive? IdeaCentre K 330B (Desktop)
Is it possible to create recovery disc files on an external hard drive? I tried using the Lenovo Recovery System from the Start menu (Windows 7) but it says it requires 30 DVDs. My external hard drive is connected, but it doesn't display in the drive drop-down. (I'm not a hard drive person...)
Thanks.
I don't recall if the original OKR that came with my K330B could back up to the external drives, but I did a clean install Win 7, and download the OneKey Recoery 7 from Lenono. The 'new' OKR 7 does allow the external had drifve back up.
Similar Messages
-
Recovery Disc Creation (1TB External hard-drive)
I am attempting to create a 'Recovery Disc' and I had a few questions. I tried doing a little research but I got yes and no answers. Is it possible to partition an external hard drive and make my computer think the partition is a blank USB drive to make a back-up media file? I realize this may have complications... I.E. When it tries to format the drive. Would that ruin the partition on the external HD or treat it as the drive and only format the portion that has been partitioned? It is even possible to do? The external hard drive being 1TB (Western Digital Passport) and I only need to make a ~32GB portion. I am just looking for a little insight before I go buy a new USB just to back up my laptop so HP Support Assistant stops yelling at me.
I wouldn't attempt it. Not sure it would even work, the Recovery Manager 'might' use it but it may also format the entire hdd in the process. Even if it was successful at creating the Recovery partition on it, you will still be faced with the problem of trying to get the laptop to boot from the usb hdd in the event of needing to perform a Recovery.
If you don't want to invest in a 32Gb flash drive to dedicate to this and have DVDs they can be used.Usually requires 3-5.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Creating Recovery Media with Portable External Hard Drive
Is it possible to create recovery data with a portable external hard drive?
Hi,
i am also facing the same problem not able to create the recovery media in external hard disk. win 7 64 bit..
Please help there is an option to create recovery media in USB flash drive but its not recognising the usb even though its connected.
Mahesh -
Recovery of files from external hard drive after restoring pc
I had to restore my pc due to loosing windows apps.
during procc ess i was instructed to download all my file to and external source for recovery later.
Done noe on external hard rive.
PC now up and running fine.
When trying to recover files it asks me what due i want to open them with .As I am not briliant with computers this mean nothing to me .
I have lots of files on my external drive thatI am unable to recover
This question was solved.
View Solution.If you backed up your files using recovery manager you may restore them using this site:
http://support.hp.com/us-en/document/c03056985
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations. -
Can't create new folder on an external hard drive, and how to transfer files?
Hello everyone,
the non-English speaking videographer I translate for is having problems operating his Premiere CS5 for Mac from an external hard drive. He cannot create new folder on the external hard drive (the "New Folder" button is grayed-out when tries to export media onto the external hard drive) and when he simply tries to create new folder, the "new folder" option isn't available.
He suspects it's because the hard drive was formatted for PC.
Questions:
- should PC-formatting cause that problem?
- what's the proper way to transfer media files from PC-formatted external hard drive to the internal hard drive on Mac?
Would appreciate your advice.
Dimitri VorontzovHe is right on the money
Now, for the sad or FAT part. You need to format the drive as FAT32 to make it work both on PC and MAC but, and that is a big BUT, the max file size of any given file will be 4GB. I haven't treid other formats yet, like the journaled MAC OS extended, but I don't think that would work. We transfer our files through or own gigabit network so I never had to try it, other than FAT32 formatted SDHC cards. -
Recovery Image on an External Hard Drive?
I was wondering if I could save a recovery image on my external hard drive?
It says to use a USB or Disc, but my computer doesn't have a CD drive, and I don't have a USB with a min of 19GB. What I do have are several 8GB, and less, and one 16GB, but these won't work for this. Nor do I have an external CD drive.
So I was wondering if I could use my external hard drive [It's got 2TB, but it's not empty...]?
I was just hoping for another option rather than buying a new USB... or external CD drive...There is no way that I know of to trick Recovery Manager into using the external hdd.
Just an FYI- not all USB flash drives will work. We see many people posting about problems with creating the recovery. I just made mine and it failed to recognize a Sandisk 3.0 drive. Tried a PNY 3.0 and it worked smooth and fast.
http://www.staples.com/PNY-32GB-Turbo-USB-30-Flash-Drive/product_338657
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Where do the MEDIA FILES live after I import them from camera to iMovie (Mac Mini OS X 10.9.2)? I need to MOVE MEDIA FILES to external hard drive.
Hello bbryson68,
Thanks for using Apple Support Communities.
From your post I understand you're wanting to move iMovie project and event data to another drive. I found the following information in the iMovie help that answers your question.
Copy or move projects, events, or clips between libraries or storage devices
Connect a storage device that contains the target library to your Mac, or copy the target library to your Mac.
Choose File > Open Library, and choose an option from the submenu.You can choose from recently opened libraries, locate an existing library on your Mac, or create a new library.The selected library is opened in the Libraries list, with the first event selected and its contents displayed in the browser.
In the Libraries list, select the event that contains the item you want to move or copy.
In the browser, select the item you want to move or copy.Tip: To select multiple clips or projects in the same library, hold down the Command key as you click the items you want to select, or drag a selection rectangle around the items.
Do one of the following:
To move items between events or libraries: Drag the clip or project to another event or library.
To copy items between events or libraries: Option-drag the clip or project to another event or library by first starting to drag and then holding down the Option key as you drag.
Work with multiple libraries
http://help.apple.com/imovie/mac/10.0/#mov3fa25bae7
Take care,
Alex H. -
Paging file on External Hard Drive?
Sorry guys,
I seem to have read something on this, but can't relocate the post I thought I saw it on. Most posts talk about the Paging File and External Hard Drives as two different instances. I am always learning something new so am asking if you guys are doing this, or did I misread something.
Is is possible to have a Paging (Virtual Memory?) file on the same External hard drive as where Scratch Discs are saved? (Or could be a separate Internal drive where Scratch Discs are located). PrE PDF user guide talks about even several different drives, where different parts of each project are stored, way too complex for the basic user like me. A separate Paging file for each hard drive? Just asking.
If you guys are doing this what are the benefits, and is there a procedure for doing it? I am not talking about the OS Paging File because I think I already understand that. But extra, additional paging files depending on how many hard drives a person would have or wants to use. Sounds wacky.
I don't think I am asking this very well, but hope you catch my drift.Bill and Steve,
Bill, if I am understanding correctly you are talking about having only One paging file spanning drives. I was asking about leaving the Windows Managed Paging (Virtual Memory?) File on C Drive and an additional Paging File on an extra drive. Again maybe I read wrong in the various forums.
I do have 3 eSATA external drives which I use for storing various family movies. I may buy a 2 TB internal later, but this is what I have now. My desktop is an i7 2.8ghz wiith 12 GB RAM, 64 bit Windows 7, 1 TB Hard Drives RAID 1? (MIrror Image). I have a huge paging file. I haven't been using an external drive for my Scratch Discs, but was going to set one up to do that, so thus my reasoning for asking about a separate paging file.
The eSATA connection is really quick, so it seems I will have no problem there. But the problem as I understand it, is all Premiere Elements versions (I have PrE7 & PrE9) up to PrE10 are 32 bit and are going to only use a few GB of System Ram before (or along with) using the Paging File. So if there were additional Paging Files, maybe it would be less CPU intensive. I don't know if Bill measured CPU usage in his tests, with and without the extra paging file. Not talking about speed necessrily but CPU usage.
I do Defragment quite a bit even though it says 0% defragmented, and expecially after I have moved a bunch of files around. For each Project I keep everything in one folder, even exports, so that if I want to delete a project but keep the AVI, I don't have to look all over the computer to delete various parts of the project. I may change some of that procedure later, but works for now. My Scratch Discs are Same as Project, thanks.
Thanks for one TIP I believe Bill gave in another Post was to not store Projects? or video? on the Desktop, because it may have different characteristics (video editing problems?) than other storage folders. I thought that was interesting because I think people get used to putting stuff on the Desktop because it's easier than going to other folders. So now I just have Desktop Shortcuts to the folders I use all the time.
Don't know what Statically Managed means. -
I am trying to free up space on my pc and moving itunes files to external hard drive. I have followed instructions and believe I have file copied to new drive, but I am having trouble moving file to recycle bin as the instructions say. I am getting the following error message: cannot delete ituneshelper.dll:access denied, make sure disk is not full or write protected and file not in use. I know the file is not in use when trying to move. Any help would be most appreciated. I am on Windows XP.
Yes. And you should not have moved that folder. Put it back. To move your iTunes library move the folder from User's Music.
tt2 -
I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to do that?
kahjot wrote:
Snow Leopard's Startup Disk pref can’t see Yosemite volumes. So the only way to switch from Snow Leopard to Yosemite is to do what Niel mentioned. Doesn't matter whether it's connected by USB or Firewire, although performance via FW would be faster.
Are you saying that Yos/10.10, as a volume located in a mounted external drive won't appear as an option in Snow Leopard's Startup Disc, in Sys Prefs? I've never heard this one before. AFAIK any mounted volume, regardless of OS, should appear there. I would think that, if it appears in the Boot Picker/Startup Manager it would also appear and could be booted to from Snow's Startup Disk. I can't test this myself, since I don't have Yos. Is what you are saying documented somewhere? -
How do I restore iTunes library from Backup files on External Hard Drive?
How do I restore iTunes library from Backup files on External Hard Drive and keep the new iTunes library on the External Hard Drive. I have all the media and playlist and .xml .itl files, just want the iTunes to recognise the content.
I backedup my iTunes content by dragging to External Hard Drive. Formatted and reinstalled OS. My iTunes content is so large, that I wish for the Library and content to remain on the External Hard Drive. I have all the music files and playlists, I just cannot get the iTunes application to display all the content. Hoping to Not have to drag and drop all the content to be recopied into new iTunes organised files.
Troubleshooting this by researching other conversations on the web, I have come stuck for a solution. One Troubleshoot told me to hold down the Command key and then lauch iTunes and a dialogue box will appear to Choose a new library, however when I try this, no Dialogue box appear to give me the option!?It sometimes has that funny switch symbol on it too.
tt2 -
After trying to change permissions on my computer so others on my network can grab files, my external Hard Drive has a lock on it and I can't access files. I've tried repairing permissions, logging in under another Administrator account, using Terminal to fix the problem, downloaded BatChmod but nothing works… Any other suggestions? I have an Imac running OS10.6.8.
There is suddenly a lock icon on my external backup drive!
Custom Permissions -
Hey guys, how can i password protect my files in external hard drive? I want to access those files both from mac and windows PC!
If you want a cross-platform solution that doesn't require the use of third-party software, use an external drive with hardware encryption. The device will have either a physical key or a numeric keypad. I don't have a specific recommendation.
-
I m able to copy and paste selected files from external hard drive to my mac but not the other way around. Im not able to copy files from Mac to external hard drive.
The same is working fine with USB flash memory.
Please help.Vijay Raymond Daniel wrote:
The only thing is we need to buy this software. if there is a free solution to inter change files between NTFS and HFS it would be better,
Don't use NTFS, remove your data off it first and change the format to something the Mac and PC can read, but doens't cost money or require software.
Drives, partitions, formatting w/Mac's + PC's -
My PC computer was wiped (virus) including itunes. How do I transfer the many playlists and music on my ipod to the new re-installed itunes?? Ipod is synced to old itunes. I have all original music files on external hard drive. Please help?
New itunes is trying to wipe the ipod. But have many many playlists (many hours making) which I want to save. Any help would be appreciated.If you want to just extract the playlists from your iPod, plug it in iTunes. When it appears under devices, right->click on it and choose Export Playlists. Save them to a location such as your desktop and them import them into your library once you have copied and imported all of your music back into it.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock
Maybe you are looking for
-
Help. about the ipod nano charged with usb 1.1
i just got the ipod nano. now i am charging it. according to the mannul, it will take 3hr to charge it by usb 2.0. considering i only have usb 1.1, so my question is how long it wil take to charge the nano. until i wait for 6hr and the screen still s
-
App Store says, "Tuner! and 4 other apps could not be downloaded at this time. Please try again later." How may I appease the Store? The message first appeared a couple of weeks ago and seems to reappear every time I download something from the App S
-
Only allow user to Save as, not Save
I want my form to be used within the company as a template when opened in Reader. With this I mean that the user never overwrites the original pdf, but is forced to "Save as" ("Save" should not be available as a choice). In other words: the pdf is op
-
How to use Pl/sql block to edit check user input
Hi, Please advise on PL/SQL Block code that could be used to Check User input from within a Loop and proceed conditionally based upon User Supplied compliant Input. Thanks in advance.
-
Battery, track[ad, & other settings on macbookpro & ibook
i have experienced battery and trackpad issues on both my ibook 12" and newer macbook pro 15" i heard talk of a way to "reset" the power settings - a sub system that apparently monitors battery charging, trackpad, and keypad settings?