Create rejection notification for SES - to vendor and plant
Hi Experts
I want to know how to enter / send rejection notificaiton for service entry sheets to vendor and plant people.
Hi amitaus28
This is SAP SNC forum, Please post your question in SAP SRM forum and close this thread
SNC does not deal with service entry sheets
Best Regards
Vinod
Similar Messages
-
Email Notifications for both UWL Tasks and Collaboration Tasks.
Hello,
I want to configure Email Notifications for both UWL Tasks and Collaboration Tasks.
Could any one please give me the configuration steps.
Thanks in Advance.
Regards,
Sridhar.Hi sri,
Refer the following threads
https://www.sdn.sap.com/irj/scn/thread?threadID=147316
https://www.sdn.sap.com/irj/scn/thread?messageID=315715#315715
https://www.sdn.sap.com/irj/scn/thread?messageID=1170132#1170132
Regards,
P.Manivannan -
My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what can i do!???? Thanks a lot for help me!!!!
I have a nearly identical problem with my Ipad 3. Mine is the left channel. I've yet to find help, but have found a number of other posts on this and other forums discussing the issue. People have tried restore, reset etc. Also, cleaning the ports with compressed air or cotton swabs. It appears to be a software issue, but no one is sure.
Along with the original poster, I'd appreciate any help.
As far as the 'level 6' poster, if you're going to be rude, please don't bother. Hope it was just a bad day. -
I have upgraded to an Iphone 6 and am at IOS 8.2. My calendar alerts no longer show up as notifications on my phone. I have gone into settings and double checked that notifications for calendar was on and it is. Any ideas on a fix?
I have iPhone 4s but the same problem with calendar on 8.2 iOS - no sound, no notification appears - but everything is switched on.
-
Hi ,
We need to to create a notification for new virtual machines created on Hyper-v Using SCOM or another way
thankshttp://sincealtair.blogspot.com/2010/04/how-to-ask-questions-in-technical-forum.html
Not nearly enough information.
If you are asking about SCOM, it is better to ask in the SCOM forum -
http://social.technet.microsoft.com/Forums/en-US/home?forum=operationsmanagergeneral
.:|:.:|:. tim -
How to create Import format for building version Hirerarchy and Node
Hi
i Want to know how to create Import format for building version Hirerarchy and Nodes.Can anyone show me with example or format for version Hierarchy with few nodes for the hierarchy
i Want to Build this 1. Version1 (Version)
2.Account (Hirerarchy)
3. Balancesheet (Limb)
4. Assets (Limb)
5. Cash (Leaf)
Thanks,Please follow the DRM User Guide,
http://docs.oracle.com/cd/E17236_01/epm.1112/drm_user.pdf
Below is my preferred approach, by selecting only relation and Hierarchy sections,
The relation section contains the Node Name and Parent Name ( you can include any other properties, but as a best practice keep the Parent Node as the last column).
The Hierarchy ( Hier ) section contains the Hierarchy Name, Top Node and Hierarchy description
Follow the Import steps and provide a Name for the version.
++++++++++++++++++++++++++++++++
[relation]
AC_BalanceSheet AC_Account
AC_Asset AC_Account
AC_Cash AC_Account
[hier]
Account AC_Account AccountHier
++++++++++++++++++++++
Note: Please delete all the special characters (TAB) created at the end of [relation] and [hier] sections while you copy the content from an Excel sheet to a Notepad. -
Configuring Email notifications for approval of requisitions and Pos
Configuring Email notifications for approval of requisitions and Pos - Using the EBS Server to send the mails as opposed to separate mail-server
For sending emails, you have to setup the workflow notification mailer.
Once this setup is done you can send approval worklist in mail and also it can be approved. ( If PO setup is done.) -
my child created a passcode for my i phone and he forgot that what will be the reset procedure
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
Where is link between plant vendor and plant code
Where i can find linke between plant vendor and plant code.
Hi,
Go to XK02,
In Purchasing Data of Vendor Master, in menu Extras > Add. Purchasing Data
It is stored in Table LFA1 and field is WERKS -
Can we have more than One DC for the sales organization and Plant combo?
Can we have more than One DC for the sales organization and Plant combination?
If yes can you please site a practical example to clear the pictureHi
First of all in SAP sales orgs are assigned to distribution channels and the combination of sales org and distribution channel which is called distribution chain is assigned to plant
There is no direct link between sales org and plant or distribution channel and plant
So sales org and plant combination doesnot exists and
it is only sales org and dist channel combination which is called as distribution chain only exists
Nowhere in SAP we are assigning sales org to plant
It is because sales org alone doesnot make sense and its combination with dist channel only makes sense
because sales org is a selling org and the distribution channel is the route to sell and this combination has only to pick the material from plant to process sales to customers
The relation between sales org and distribution channels is many to many and also vice versa
Multiple sales orgs can be assigned to one distribution channel and
Multiple distribution channels can be assigned to one sales org
Similarly the relation ship between Distribution chain (sales org+dist channel) to plant is also many to many and vice versa
Similarly plants from other company codes can also be assigned to Distribution chain to facilitate intercompany processes
In whatever way look at it the multiple distribution channels can be fit anywhere
Regards
Raja -
Unable to create a notification for a group (Cisco Unity Express 3.2)
There is Cisco ISR 2821 with CME 7.1 and Cisco Unity Express 3.2.
I am trying to create notifications for a group named AAA in CUE.
I do following (GUI):
1. Go to Configure -> Groups
2. Click on the group name AAA.
3. In Group Profile window 'Enable notification for this user/group' option is enabled.
4. Go to Mailbox tab. There is an associated mailbox with ticks against Enabled and Fax Enabled.
5. Go to Notification tab and see the warning:
No Notification Devices found for User/Group
Also, there are another several groups on this system and I am able to turn notification on for them. These groups have the same owners and members that AAA has. Moreover, if I create a new group and set it up absolutely the same as AAA, I can turn notifications on for it.
The problem in this way is that we have our custom greetings and after I created a new group, for example BBB, with the same settings (as AAA, inluding Primary Extansion and Primary E.164 Number) and remove these numbers from AAA, then it works and users would receive notification about new voice messages. BUT, when I call BBB I listen to standart Cisco greeting promts.
I don't undestand why it happens, because all these greetings are determined in Voicemail -> Auto Attendant section and I did not any changes here at all.
How can I fix this 'notification' problem?
Thanks.Process with success:
unzip the packet in: C:\APEX
1. Install:
@apexins SYSAUX SYSAUX TEMP /i/
2. Change to password:
@apxchpwd,
3. Run apex_epg_config.sql
On windows:
@apex_epg_config.sql (page 30, the guide of intallation)
Important:Replace SYSTEM_DRIVE:\TEMP by C:
E.g.: @apex_epg_config C:
After this, follow the next steps
4. ALTER USER ANONYMOUS ACCOUNT UNLOCK;
Finish! Just execute apxldimg.sql script if you is upgrading from a preview release.
Now try the connect on the browser IE6 o later:
http://localhost:8080/apex/apex_admin
Then create your workspace.
Edited by: [email protected] on 10/03/2009 11:59 -
Creating Deployment Packages for Adobe Captivate 7 and Presenter 9 using CCP
Using Creative Cloud Packager 1.1 :
User needs to Sign in with Adobe ID and password
Enter Adobe Captivate 7 or Adobe Presenter 9 Serial Number :
It will validate the key and ask you about the details of Captivate 7 or Presenter 9 Package :
You can choose the product and components you want packaged
Once you click on “Build”, it will download and create the package for Adobe Captivate 7
Note : Adobe CCP 1.1 is available in LWS (Adobe Licensing Website) downloads.
Thanks,
Vikram
Adobe SupportHi Geoffrey,
Welcome to Adobe Forums!
To create the deployment Package for Adobe Captivate 7 you need Creative Cloud Packager instead of AMEE 3.1 .
You can download the Creative Cloud Packager (CCP) from your Licensing account (www.licensing.adobe.com) .
Please folow the below link to create the package:
http://captivate.adobe.com/captivate/topics/creating_deployment_packages_for_adobe_captiva te_7_and_adobe_presenter_9
Hope this helps !
Thanks and Regards
Himanshu Satija -
Create Maintenance Order for the Sub assembly and the top assembly together
Hi
We create repair order for an equipment when it comes for maintenance.
We want to create repair/maintenance order for all the sub assemblies for the equipment along with the order for the top assembly at the same time.
Appreciate your guidance.Dear Srini K
Please create the order for the main equipment & create suborders for the sub assembly is one way to do it. so that main order & other orders may have link to each other.
Another way if you want to store history that which are the assemblies are affected or you have worked on it you can enter these in all assemblies in object parts tab of the orders.
Also you can create the notification & maintain the object parts code, Damage code & cause code for each assembly & sub assembly sothat you can keep history.
But if you can tell me the business requiremennt it detailed i can guide you ini correct direction.
I hope this will satify your requirement.
Regards -
Hi all
I need your help on this issue.
Is there a restriction in system that only one vendor account can be assigned to a given plant?
vendor 10035120 need to be assigned to plant 4203, however when I trying to create the assignment the following error message appears:
Plant 4203 already assigned to vendor 10011229
Message no. WY 060
I can not see any relation between vendor 10035120 and 10011229
vendor account group Z001 (this is a copy of the SAP default 0001.
any idea?
Thanks and regardswhy should one plant be 2 vendors?
you need to assign a vendor to a Plant if you want do Stock transfers with PO and deliveries.
per plant you define one vendor, and this one vendor is then assgined to the plant (in vendor master purchasing view via menu Extras)
plant A is vendor A
plant B is vendor B
If A procures from B, then plant B is entered in the purchase order header, while the purchase order item has your plant A.
the relationships (Which plant procures from which other plant) are setup in cutomizing. -
How can i get the open sale orders for given material no and plant
Hi,
I have to retrieve the open sale orders depending on the material number and plant.
For only open sale orders at header level and item level.
I want to use VBUK-GBSTK to find open sale order at header level and
VBUP-GBSTA at item level.
Can any one suggest me the best logic as performance is concerned?
Thanks,
Kumar.hi Prasanth,
select werks matnr from ZVSCHDRUN into table it_plant.
sort it_plant by matnr werks.
select
vbeln
posnr
matnr
werks
erdat
kbmeng
vrkme
from vbap
into table it_vbap
for all entries in it_plant
where matnr = it_plant-matnr and
werks = it_plant-werks.
and again i have to write one more select query for vbup.
am i right?
Maybe you are looking for
-
Hi experts, see, we use to manually open and close the posting periods but now my client wants it to be automised one .And i went through sm36 and while feeding data there is one field asking the programe name for it to schedule .. as per transaction
-
Flash 11.2.202.238 not working in Linux Firefox 15.0.1
I've followed instructions 3x and still get no movie on the test URL: http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html Specifics to my system: ]$ uname -m i686 $ file /usr/bin/file /usr/bin/file: ELF 32-bit LSB executable, Inte
-
Photoshop CS5 - Action is not running automatically while I trying to save PDF to JPG
My Problem in Photoshop CS5: Action is not running automatically while I trying to save PDF to JPG, in the batch process: Followed following steps: Opened PDF file Created new auction (F2) Flatten image Save as JPG Close file To Run Batch: Opened Bat
-
802.1x, Machine Authentication, Active Directory and eDirectory
Does anyone think this is feasible as a solution... Problem Definition. 1) Machines all use the netware Client and authenticate to eDirectory initially, then to AD. 2) I want to use ACS, not Free Radius. 3) I don't want to use a 3rd party supplicant.
-
Workflow Approval for CTS+ for NON ABAP Transport
Hi We have a NW Portal system currently using CTS+ for transport. We would like to incorporate a workflow approval for transport across the different landscape (DEV -> TEST -> QA -> PRD) with CTS+. The workflow approval would work in such a way that